blob: aa6a9351ce48a036a5e68c70bf0a95e282dcacd7 [file] [log] [blame]
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -07001/*
2 * linux/arch/arm/mach-omap2/board-omap3evm.c
3 *
4 * Copyright (C) 2008 Texas Instruments
5 *
6 * Modified from mach-omap2/board-3430sdp.c
7 *
8 * Initial code: Syed Mohammed Khasim
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/platform_device.h>
18#include <linux/delay.h>
19#include <linux/err.h>
20#include <linux/clk.h>
21#include <linux/gpio.h>
22#include <linux/input.h>
Janusz Krzysztofik61354342009-10-22 14:43:17 -070023#include <linux/input/matrix_keypad.h>
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070024#include <linux/leds.h>
Sriram562138a2009-11-22 10:11:30 -080025#include <linux/interrupt.h>
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070026
27#include <linux/spi/spi.h>
28#include <linux/spi/ads7846.h>
Balaji T Kebeb53e2009-12-15 20:09:02 +053029#include <linux/i2c/twl.h>
Gupta, Ajay Kumare8e2ff42009-07-29 11:58:57 +053030#include <linux/usb/otg.h>
Sriram562138a2009-11-22 10:11:30 -080031#include <linux/smsc911x.h>
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070032
Eyal Reizer741927f2011-01-27 09:49:49 +000033#include <linux/wl12xx.h>
34#include <linux/regulator/fixed.h>
Mike Rapoport1a7ec132009-11-22 10:11:29 -080035#include <linux/regulator/machine.h>
Sukumar Ghorai3a638332010-09-15 14:49:23 +000036#include <linux/mmc/host.h>
Mike Rapoport1a7ec132009-11-22 10:11:29 -080037
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070038#include <mach/hardware.h>
39#include <asm/mach-types.h>
40#include <asm/mach/arch.h>
41#include <asm/mach/map.h>
42
Tony Lindgrence491cf2009-10-20 09:40:47 -070043#include <plat/board.h>
Tony Lindgrence491cf2009-10-20 09:40:47 -070044#include <plat/usb.h>
45#include <plat/common.h>
46#include <plat/mcspi.h>
Tomi Valkeinena0b38cc2011-05-11 14:05:07 +030047#include <video/omapdss.h>
Tomi Valkeinenf8ae2f02011-05-10 19:48:10 +030048#include <video/omap-panel-generic-dpi.h>
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070049
Tony Lindgrenca5742b2009-12-11 16:16:32 -080050#include "mux.h"
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070051#include "sdram-micron-mt46h32m32lf-6.h"
Adrian Hunterd02a9002010-02-15 10:03:34 -080052#include "hsmmc.h"
Mike Rapoport96974a22011-04-25 01:09:05 +030053#include "common-board-devices.h"
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070054
55#define OMAP3_EVM_TS_GPIO 175
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -080056#define OMAP3_EVM_EHCI_VBUS 22
57#define OMAP3_EVM_EHCI_SELECT 61
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070058
59#define OMAP3EVM_ETHR_START 0x2c000000
60#define OMAP3EVM_ETHR_SIZE 1024
Ajay Kumar Guptadb408022009-11-22 10:11:27 -080061#define OMAP3EVM_ETHR_ID_REV 0x50
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070062#define OMAP3EVM_ETHR_GPIO_IRQ 176
Sriram562138a2009-11-22 10:11:30 -080063#define OMAP3EVM_SMSC911X_CS 5
Vaibhav Hiremath9bc64b82011-01-24 19:25:55 +000064/*
65 * Eth Reset signal
66 * 64 = Generation 1 (<=RevD)
67 * 7 = Generation 2 (>=RevE)
68 */
69#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64
70#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -070071
Ajay Kumar Guptadb408022009-11-22 10:11:27 -080072static u8 omap3_evm_version;
73
74u8 get_omap3_evm_rev(void)
75{
76 return omap3_evm_version;
77}
78EXPORT_SYMBOL(get_omap3_evm_rev);
79
80static void __init omap3_evm_get_revision(void)
81{
82 void __iomem *ioaddr;
83 unsigned int smsc_id;
84
85 /* Ethernet PHY ID is stored at ID_REV register */
86 ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
87 if (!ioaddr)
88 return;
89 smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
90 iounmap(ioaddr);
91
92 switch (smsc_id) {
93 /*SMSC9115 chipset*/
94 case 0x01150000:
95 omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
96 break;
97 /*SMSC 9220 chipset*/
98 case 0x92200000:
99 default:
100 omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
101 }
102}
103
Sriram562138a2009-11-22 10:11:30 -0800104#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
Mike Rapoport21b42732011-04-16 22:29:30 +0000105#include <plat/gpmc-smsc911x.h>
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700106
Mike Rapoport21b42732011-04-16 22:29:30 +0000107static struct omap_smsc911x_platform_data smsc911x_cfg = {
108 .cs = OMAP3EVM_SMSC911X_CS,
109 .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ,
110 .gpio_reset = -EINVAL,
111 .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
Sriram562138a2009-11-22 10:11:30 -0800112};
113
114static inline void __init omap3evm_init_smsc911x(void)
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700115{
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700116 struct clk *l3ck;
117 unsigned int rate;
118
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700119 l3ck = clk_get(NULL, "l3_ck");
120 if (IS_ERR(l3ck))
121 rate = 100000000;
122 else
123 rate = clk_get_rate(l3ck);
124
Vaibhav Hiremath9bc64b82011-01-24 19:25:55 +0000125 /* Configure ethernet controller reset gpio */
126 if (cpu_is_omap3430()) {
Mike Rapoport21b42732011-04-16 22:29:30 +0000127 if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
128 smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
129 else
130 smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
Vaibhav Hiremath9bc64b82011-01-24 19:25:55 +0000131 }
132
Mike Rapoport21b42732011-04-16 22:29:30 +0000133 gpmc_smsc911x_init(&smsc911x_cfg);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700134}
135
Sriram562138a2009-11-22 10:11:30 -0800136#else
137static inline void __init omap3evm_init_smsc911x(void) { return; }
138#endif
139
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100140/*
141 * OMAP3EVM LCD Panel control signals
142 */
143#define OMAP3EVM_LCD_PANEL_LR 2
144#define OMAP3EVM_LCD_PANEL_UD 3
145#define OMAP3EVM_LCD_PANEL_INI 152
146#define OMAP3EVM_LCD_PANEL_ENVDD 153
147#define OMAP3EVM_LCD_PANEL_QVGA 154
148#define OMAP3EVM_LCD_PANEL_RESB 155
149#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
150#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
151
Igor Grinbergbc593f52011-05-03 18:22:09 +0300152static struct gpio omap3_evm_dss_gpios[] __initdata = {
153 { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" },
154 { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" },
155 { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" },
156 { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" },
157 { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" },
158 { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" },
159};
160
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100161static int lcd_enabled;
162static int dvi_enabled;
163
164static void __init omap3_evm_display_init(void)
165{
166 int r;
167
Igor Grinbergbc593f52011-05-03 18:22:09 +0300168 r = gpio_request_array(omap3_evm_dss_gpios,
169 ARRAY_SIZE(omap3_evm_dss_gpios));
170 if (r)
171 printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100172}
173
174static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
175{
176 if (dvi_enabled) {
177 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
178 return -EINVAL;
179 }
180 gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
181
182 if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000183 gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100184 else
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000185 gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100186
187 lcd_enabled = 1;
188 return 0;
189}
190
191static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
192{
193 gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
194
195 if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000196 gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100197 else
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000198 gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100199
200 lcd_enabled = 0;
201}
202
203static struct omap_dss_device omap3_evm_lcd_device = {
204 .name = "lcd",
205 .driver_name = "sharp_ls_panel",
206 .type = OMAP_DISPLAY_TYPE_DPI,
207 .phy.dpi.data_lines = 18,
208 .platform_enable = omap3_evm_enable_lcd,
209 .platform_disable = omap3_evm_disable_lcd,
210};
211
212static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
213{
214 return 0;
215}
216
217static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
218{
219}
220
221static struct omap_dss_device omap3_evm_tv_device = {
222 .name = "tv",
223 .driver_name = "venc",
224 .type = OMAP_DISPLAY_TYPE_VENC,
225 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
226 .platform_enable = omap3_evm_enable_tv,
227 .platform_disable = omap3_evm_disable_tv,
228};
229
230static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
231{
232 if (lcd_enabled) {
233 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
234 return -EINVAL;
235 }
236
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000237 gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100238
239 dvi_enabled = 1;
240 return 0;
241}
242
243static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
244{
Vaibhav Hiremathf186e9b2011-01-25 17:37:37 +0000245 gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100246
247 dvi_enabled = 0;
248}
249
Bryan Wu89747c92010-11-17 13:34:34 +0000250static struct panel_generic_dpi_data dvi_panel = {
251 .name = "generic",
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100252 .platform_enable = omap3_evm_enable_dvi,
253 .platform_disable = omap3_evm_disable_dvi,
254};
255
Bryan Wu89747c92010-11-17 13:34:34 +0000256static struct omap_dss_device omap3_evm_dvi_device = {
257 .name = "dvi",
258 .type = OMAP_DISPLAY_TYPE_DPI,
259 .driver_name = "generic_dpi_panel",
260 .data = &dvi_panel,
261 .phy.dpi.data_lines = 24,
262};
263
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100264static struct omap_dss_device *omap3_evm_dss_devices[] = {
265 &omap3_evm_lcd_device,
266 &omap3_evm_tv_device,
267 &omap3_evm_dvi_device,
268};
269
270static struct omap_dss_board_info omap3_evm_dss_data = {
271 .num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
272 .devices = omap3_evm_dss_devices,
273 .default_device = &omap3_evm_lcd_device,
274};
275
Oleg Drokin786b01a2011-06-06 18:57:07 +0000276static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
277 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
Mike Rapoport1a7ec132009-11-22 10:11:29 -0800278};
279
Oleg Drokin786b01a2011-06-06 18:57:07 +0000280static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
281 REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
Mike Rapoport1a7ec132009-11-22 10:11:29 -0800282};
283
284/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
285static struct regulator_init_data omap3evm_vmmc1 = {
286 .constraints = {
287 .min_uV = 1850000,
288 .max_uV = 3150000,
289 .valid_modes_mask = REGULATOR_MODE_NORMAL
290 | REGULATOR_MODE_STANDBY,
291 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
292 | REGULATOR_CHANGE_MODE
293 | REGULATOR_CHANGE_STATUS,
294 },
Oleg Drokin786b01a2011-06-06 18:57:07 +0000295 .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply),
296 .consumer_supplies = omap3evm_vmmc1_supply,
Mike Rapoport1a7ec132009-11-22 10:11:29 -0800297};
298
299/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
300static struct regulator_init_data omap3evm_vsim = {
301 .constraints = {
302 .min_uV = 1800000,
303 .max_uV = 3000000,
304 .valid_modes_mask = REGULATOR_MODE_NORMAL
305 | REGULATOR_MODE_STANDBY,
306 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
307 | REGULATOR_CHANGE_MODE
308 | REGULATOR_CHANGE_STATUS,
309 },
Oleg Drokin786b01a2011-06-06 18:57:07 +0000310 .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply),
311 .consumer_supplies = omap3evm_vsim_supply,
Mike Rapoport1a7ec132009-11-22 10:11:29 -0800312};
313
Adrian Hunter68ff0422010-02-15 10:03:34 -0800314static struct omap2_hsmmc_info mmc[] = {
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700315 {
316 .mmc = 1,
Sukumar Ghorai3a638332010-09-15 14:49:23 +0000317 .caps = MMC_CAP_4_BIT_DATA,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700318 .gpio_cd = -EINVAL,
319 .gpio_wp = 63,
320 },
Eyal Reizer741927f2011-01-27 09:49:49 +0000321#ifdef CONFIG_WL12XX_PLATFORM_DATA
322 {
323 .name = "wl1271",
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000324 .mmc = 2,
Eyal Reizer741927f2011-01-27 09:49:49 +0000325 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
326 .gpio_wp = -EINVAL,
327 .gpio_cd = -EINVAL,
328 .nonremovable = true,
329 },
330#endif
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700331 {} /* Terminator */
332};
333
334static struct gpio_led gpio_leds[] = {
335 {
336 .name = "omap3evm::ledb",
337 /* normally not visible (board underside) */
338 .default_trigger = "default-on",
339 .gpio = -EINVAL, /* gets replaced */
340 .active_low = true,
341 },
342};
343
344static struct gpio_led_platform_data gpio_led_info = {
345 .leds = gpio_leds,
346 .num_leds = ARRAY_SIZE(gpio_leds),
347};
348
349static struct platform_device leds_gpio = {
350 .name = "leds-gpio",
351 .id = -1,
352 .dev = {
353 .platform_data = &gpio_led_info,
354 },
355};
356
357
358static int omap3evm_twl_gpio_setup(struct device *dev,
359 unsigned gpio, unsigned ngpio)
360{
Igor Grinbergbc593f52011-05-03 18:22:09 +0300361 int r, lcd_bl_en;
Vaibhav Hiremath42fc8ca2011-01-25 17:37:40 +0000362
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700363 /* gpio + 0 is "mmc0_cd" (input/IRQ) */
Tony Lindgren4896e392009-12-11 16:16:32 -0800364 omap_mux_init_gpio(63, OMAP_PIN_INPUT);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700365 mmc[0].gpio_cd = gpio + 0;
Adrian Hunter68ff0422010-02-15 10:03:34 -0800366 omap2_hsmmc_init(mmc);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700367
368 /*
369 * Most GPIOs are for USB OTG. Some are mostly sent to
370 * the P2 connector; notably LEDA for the LCD backlight.
371 */
372
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100373 /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
Igor Grinbergbc593f52011-05-03 18:22:09 +0300374 lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
375 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
376 r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
Vaibhav Hiremath42fc8ca2011-01-25 17:37:40 +0000377 if (r)
378 printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100379
380 /* gpio + 7 == DVI Enable */
Igor Grinbergbc593f52011-05-03 18:22:09 +0300381 gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100382
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700383 /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
384 gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
385
386 platform_device_register(&leds_gpio);
387
388 return 0;
389}
390
391static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
392 .gpio_base = OMAP_MAX_GPIO_LINES,
393 .irq_base = TWL4030_GPIO_IRQ_BASE,
394 .irq_end = TWL4030_GPIO_IRQ_END,
395 .use_leds = true,
396 .setup = omap3evm_twl_gpio_setup,
397};
398
Manjunath Kondaiah Gbead4372010-10-08 10:01:13 -0700399static uint32_t board_keymap[] = {
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700400 KEY(0, 0, KEY_LEFT),
Sanjeev Premi0621d752010-02-17 14:09:24 -0800401 KEY(0, 1, KEY_DOWN),
402 KEY(0, 2, KEY_ENTER),
403 KEY(0, 3, KEY_M),
404
405 KEY(1, 0, KEY_RIGHT),
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700406 KEY(1, 1, KEY_UP),
Sanjeev Premi0621d752010-02-17 14:09:24 -0800407 KEY(1, 2, KEY_I),
408 KEY(1, 3, KEY_N),
409
410 KEY(2, 0, KEY_A),
411 KEY(2, 1, KEY_E),
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700412 KEY(2, 2, KEY_J),
Sanjeev Premi0621d752010-02-17 14:09:24 -0800413 KEY(2, 3, KEY_O),
414
415 KEY(3, 0, KEY_B),
416 KEY(3, 1, KEY_F),
417 KEY(3, 2, KEY_K),
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700418 KEY(3, 3, KEY_P)
419};
420
Tony Lindgren4f543332009-09-24 16:23:16 -0700421static struct matrix_keymap_data board_map_data = {
422 .keymap = board_keymap,
423 .keymap_size = ARRAY_SIZE(board_keymap),
424};
425
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700426static struct twl4030_keypad_data omap3evm_kp_data = {
Tony Lindgren4f543332009-09-24 16:23:16 -0700427 .keymap_data = &board_map_data,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700428 .rows = 4,
429 .cols = 4,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700430 .rep = 1,
431};
432
Vaibhav Hiremath410491d2011-01-25 17:37:38 +0000433/* ads7846 on SPI */
Oleg Drokin786b01a2011-06-06 18:57:07 +0000434static struct regulator_consumer_supply omap3evm_vio_supply[] = {
435 REGULATOR_SUPPLY("vcc", "spi1.0"),
436};
Vaibhav Hiremath410491d2011-01-25 17:37:38 +0000437
438/* VIO for ads7846 */
439static struct regulator_init_data omap3evm_vio = {
440 .constraints = {
441 .min_uV = 1800000,
442 .max_uV = 1800000,
443 .apply_uV = true,
444 .valid_modes_mask = REGULATOR_MODE_NORMAL
445 | REGULATOR_MODE_STANDBY,
446 .valid_ops_mask = REGULATOR_CHANGE_MODE
447 | REGULATOR_CHANGE_STATUS,
448 },
Oleg Drokin786b01a2011-06-06 18:57:07 +0000449 .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply),
450 .consumer_supplies = omap3evm_vio_supply,
Vaibhav Hiremath410491d2011-01-25 17:37:38 +0000451};
452
Eyal Reizer741927f2011-01-27 09:49:49 +0000453#ifdef CONFIG_WL12XX_PLATFORM_DATA
454
455#define OMAP3EVM_WLAN_PMENA_GPIO (150)
456#define OMAP3EVM_WLAN_IRQ_GPIO (149)
457
Oleg Drokin786b01a2011-06-06 18:57:07 +0000458static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
Peter Ujfalusid19f5792011-06-28 10:16:55 +0000459 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
Oleg Drokin786b01a2011-06-06 18:57:07 +0000460};
Eyal Reizer741927f2011-01-27 09:49:49 +0000461
462/* VMMC2 for driving the WL12xx module */
463static struct regulator_init_data omap3evm_vmmc2 = {
464 .constraints = {
465 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
466 },
Peter Ujfalusid19f5792011-06-28 10:16:55 +0000467 .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply),
Oleg Drokin786b01a2011-06-06 18:57:07 +0000468 .consumer_supplies = omap3evm_vmmc2_supply,
Eyal Reizer741927f2011-01-27 09:49:49 +0000469};
470
471static struct fixed_voltage_config omap3evm_vwlan = {
472 .supply_name = "vwl1271",
473 .microvolts = 1800000, /* 1.80V */
474 .gpio = OMAP3EVM_WLAN_PMENA_GPIO,
475 .startup_delay = 70000, /* 70ms */
476 .enable_high = 1,
477 .enabled_at_boot = 0,
478 .init_data = &omap3evm_vmmc2,
479};
480
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000481static struct platform_device omap3evm_wlan_regulator = {
Eyal Reizer741927f2011-01-27 09:49:49 +0000482 .name = "reg-fixed-voltage",
483 .id = 1,
484 .dev = {
485 .platform_data = &omap3evm_vwlan,
486 },
487};
488
489struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
490 .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000491 .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
Eyal Reizer741927f2011-01-27 09:49:49 +0000492};
493#endif
494
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700495static struct twl4030_platform_data omap3evm_twldata = {
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700496 /* platform_data for children goes here */
497 .keypad = &omap3evm_kp_data,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700498 .gpio = &omap3evm_gpio_data,
Vaibhav Hiremath410491d2011-01-25 17:37:38 +0000499 .vio = &omap3evm_vio,
Mike Rapoportfbd80712011-04-25 01:09:06 +0300500 .vmmc1 = &omap3evm_vmmc1,
501 .vsim = &omap3evm_vsim,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700502};
503
504static int __init omap3_evm_i2c_init(void)
505{
Peter Ujfalusi827ed9a2011-06-07 10:28:54 +0300506 omap3_pmic_get_config(&omap3evm_twldata,
Peter Ujfalusib252b0e2011-06-07 11:38:24 +0300507 TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
508 TWL_COMMON_PDATA_AUDIO,
509 TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
510
511 omap3evm_twldata.vdac->constraints.apply_uV = true;
512 omap3evm_twldata.vpll2->constraints.apply_uV = true;
513
Mike Rapoportfbd80712011-04-25 01:09:06 +0300514 omap3_pmic_init("twl4030", &omap3evm_twldata);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700515 omap_register_i2c_bus(2, 400, NULL, 0);
516 omap_register_i2c_bus(3, 400, NULL, 0);
517 return 0;
518}
519
Paul Walmsleyb3c6df32009-09-03 20:14:02 +0300520static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
Paul Walmsleyb3c6df32009-09-03 20:14:02 +0300521};
522
Keshava Munegowda181b2502011-03-01 20:08:16 +0530523static struct usbhs_omap_board_data usbhs_bdata __initdata = {
Felipe Balbi58a54912009-11-22 10:11:01 -0800524
Keshava Munegowda181b2502011-03-01 20:08:16 +0530525 .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
526 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
527 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
Felipe Balbi58a54912009-11-22 10:11:01 -0800528
529 .phy_reset = true,
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800530 /* PHY reset GPIO will be runtime programmed based on EVM version */
Felipe Balbi58a54912009-11-22 10:11:01 -0800531 .reset_gpio_port[0] = -EINVAL,
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800532 .reset_gpio_port[1] = -EINVAL,
Felipe Balbi58a54912009-11-22 10:11:01 -0800533 .reset_gpio_port[2] = -EINVAL
534};
535
Tony Lindgrenca5742b2009-12-11 16:16:32 -0800536#ifdef CONFIG_OMAP_MUX
Vaibhav Hiremath904c5452011-01-25 17:37:39 +0000537static struct omap_board_mux omap35x_board_mux[] __initdata = {
Sanjeev Premiaa6912d82010-02-17 14:09:23 -0800538 OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
Ranjith Lohithakshanf3a8cde2010-05-03 17:07:51 +0530539 OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
Sanjeev Premiaa6912d82010-02-17 14:09:23 -0800540 OMAP_PIN_OFF_WAKEUPENABLE),
Sanjeev Premi87520aa2010-02-17 14:09:24 -0800541 OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
Vaibhav Hiremath854c1222011-01-25 17:37:41 +0000542 OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
543 OMAP_PIN_OFF_WAKEUPENABLE),
Vaibhav Hiremath9bc64b82011-01-24 19:25:55 +0000544 OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
545 OMAP_PIN_OFF_NONE),
546 OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
547 OMAP_PIN_OFF_NONE),
Eyal Reizer741927f2011-01-27 09:49:49 +0000548#ifdef CONFIG_WL12XX_PLATFORM_DATA
549 /* WLAN IRQ - GPIO 149 */
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000550 OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
Eyal Reizer741927f2011-01-27 09:49:49 +0000551
552 /* WLAN POWER ENABLE - GPIO 150 */
553 OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
554
555 /* MMC2 SDIO pin muxes for WL12xx */
556 OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
557 OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
558 OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
559 OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
560 OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
561 OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
562#endif
Tony Lindgrenca5742b2009-12-11 16:16:32 -0800563 { .reg_offset = OMAP_MUX_TERMINATOR },
564};
Vaibhav Hiremath904c5452011-01-25 17:37:39 +0000565
566static struct omap_board_mux omap36x_board_mux[] __initdata = {
567 OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
568 OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
569 OMAP_PIN_OFF_WAKEUPENABLE),
570 OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
Vaibhav Hiremath854c1222011-01-25 17:37:41 +0000571 OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
572 OMAP_PIN_OFF_WAKEUPENABLE),
Vaibhav Hiremath904c5452011-01-25 17:37:39 +0000573 /* AM/DM37x EVM: DSS data bus muxed with sys_boot */
574 OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
575 OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
576 OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
577 OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
578 OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
579 OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
580 OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
581 OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
582 OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
583 OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
584 OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
585 OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000586#ifdef CONFIG_WL12XX_PLATFORM_DATA
587 /* WLAN IRQ - GPIO 149 */
588 OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
589
590 /* WLAN POWER ENABLE - GPIO 150 */
591 OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
592
593 /* MMC2 SDIO pin muxes for WL12xx */
594 OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
595 OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
596 OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
597 OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
598 OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
599 OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
600#endif
Vaibhav Hiremath904c5452011-01-25 17:37:39 +0000601
602 { .reg_offset = OMAP_MUX_TERMINATOR },
603};
604#else
605#define omap35x_board_mux NULL
606#define omap36x_board_mux NULL
Tony Lindgrenca5742b2009-12-11 16:16:32 -0800607#endif
608
Maulik Mankad884b8362010-02-17 14:09:30 -0800609static struct omap_musb_board_data musb_board_data = {
610 .interface_type = MUSB_INTERFACE_ULPI,
611 .mode = MUSB_OTG,
612 .power = 100,
613};
614
Igor Grinbergbc593f52011-05-03 18:22:09 +0300615static struct gpio omap3_evm_ehci_gpios[] __initdata = {
616 { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" },
617 { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" },
618};
619
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700620static void __init omap3_evm_init(void)
621{
Ajay Kumar Guptadb408022009-11-22 10:11:27 -0800622 omap3_evm_get_revision();
Vaibhav Hiremath904c5452011-01-25 17:37:39 +0000623
624 if (cpu_is_omap3630())
625 omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
626 else
627 omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
Ajay Kumar Guptadb408022009-11-22 10:11:27 -0800628
Tony Lindgrene41cccf2011-02-24 14:36:03 -0800629 omap_board_config = omap3_evm_config;
630 omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700631
632 omap3_evm_i2c_init();
633
Senthilvadivu Guruswamyd5e13222011-02-22 11:24:50 +0200634 omap_display_init(&omap3_evm_dss_data);
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700635
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700636 omap_serial_init();
Tony Lindgrena4ca9db2011-08-22 23:57:23 -0700637 omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
Maulik Mankad1a4f4632010-02-17 14:09:29 -0800638
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700639 /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
640 usb_nop_xceiv_register();
Maulik Mankad1a4f4632010-02-17 14:09:29 -0800641
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800642 if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
643 /* enable EHCI VBUS using GPIO22 */
Igor Grinbergbc593f52011-05-03 18:22:09 +0300644 omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800645 /* Select EHCI port on main board */
Igor Grinbergbc593f52011-05-03 18:22:09 +0300646 omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
647 OMAP_PIN_INPUT_PULLUP);
648 gpio_request_array(omap3_evm_ehci_gpios,
649 ARRAY_SIZE(omap3_evm_ehci_gpios));
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800650
651 /* setup EHCI phy reset config */
Tony Lindgren4896e392009-12-11 16:16:32 -0800652 omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
Keshava Munegowda181b2502011-03-01 20:08:16 +0530653 usbhs_bdata.reset_gpio_port[1] = 21;
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800654
Ajay Kumar Gupta58815fa2010-03-25 13:25:27 +0200655 /* EVM REV >= E can supply 500mA with EXTVBUS programming */
656 musb_board_data.power = 500;
657 musb_board_data.extvbus = 1;
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800658 } else {
659 /* setup EHCI phy reset on MDC */
Tony Lindgren4896e392009-12-11 16:16:32 -0800660 omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
Keshava Munegowda181b2502011-03-01 20:08:16 +0530661 usbhs_bdata.reset_gpio_port[1] = 135;
Ajay Kumar Guptae8e51d22009-11-22 10:11:28 -0800662 }
Maulik Mankad884b8362010-02-17 14:09:30 -0800663 usb_musb_init(&musb_board_data);
Keshava Munegowda9e64bb12011-03-01 20:08:19 +0530664 usbhs_init(&usbhs_bdata);
Mike Rapoport96974a22011-04-25 01:09:05 +0300665 omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
Sriram562138a2009-11-22 10:11:30 -0800666 omap3evm_init_smsc911x();
Vaibhav Hiremath703e3062010-01-04 15:34:16 +0100667 omap3_evm_display_init();
Eyal Reizer741927f2011-01-27 09:49:49 +0000668
669#ifdef CONFIG_WL12XX_PLATFORM_DATA
670 /* WL12xx WLAN Init */
671 if (wl12xx_set_platform_data(&omap3evm_wlan_data))
672 pr_err("error setting wl12xx data\n");
Eyal Reizeraca6ad02011-02-27 10:45:18 +0000673 platform_device_register(&omap3evm_wlan_regulator);
Eyal Reizer741927f2011-01-27 09:49:49 +0000674#endif
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700675}
676
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700677MACHINE_START(OMAP3EVM, "OMAP3 EVM")
678 /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
Nicolas Pitre5e52b432011-07-05 22:38:15 -0400679 .atag_offset = 0x100,
Russell King71ee7da2010-05-23 10:18:16 +0100680 .reserve = omap_reserve,
Russell King - ARM Linux3dc3bad2011-02-14 15:40:20 -0800681 .map_io = omap3_map_io,
Tony Lindgren8f5b5a42011-08-22 23:57:24 -0700682 .init_early = omap35xx_init_early,
Tony Lindgren741e3a82011-05-17 03:51:26 -0700683 .init_irq = omap3_init_irq,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700684 .init_machine = omap3_evm_init,
Tony Lindgrene74984e2011-03-29 15:54:48 -0700685 .timer = &omap3_timer,
Syed Mohammed Khasim53c5ec32009-05-28 14:13:28 -0700686MACHINE_END