cleanup regulator supply definitions in mach-omap2
to use REGULATOR_SUPPLY arrays.
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Nishant Kamat <nskamat@ti.com>
CC: Steve Sakoman <steve@sakoman.com>
CC: Felipe Balbi <balbi@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: peter.barada@logicpd.com
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b4d4346..fc7a23a 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,12 +273,12 @@
.default_device = &omap3_evm_lcd_device,
};
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -292,8 +292,8 @@
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply),
+ .consumer_supplies = omap3evm_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -307,8 +307,8 @@
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vsim_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply),
+ .consumer_supplies = omap3evm_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
@@ -449,8 +449,9 @@
.audio = &omap3evm_audio_data,
};
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = {
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
@@ -463,8 +464,8 @@
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3_evm_vdda_dac_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply),
+ .consumer_supplies = omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
@@ -488,8 +489,9 @@
};
/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply =
- REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply omap3evm_vio_supply[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
/* VIO for ads7846 */
static struct regulator_init_data omap3evm_vio = {
@@ -502,8 +504,8 @@
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vio_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply),
+ .consumer_supplies = omap3evm_vio_supply,
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
@@ -511,16 +513,17 @@
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
-static struct regulator_consumer_supply omap3evm_vmmc2_supply =
+static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+};
/* VMMC2 for driving the WL12xx module */
static struct regulator_init_data omap3evm_vmmc2 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc2_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply);,
+ .consumer_supplies = omap3evm_vmmc2_supply,
};
static struct fixed_voltage_config omap3evm_vwlan = {
