| #!/bin/sh |
| # |
| # Copyright (c) 2007 Johannes E. Schindelin |
| # |
| |
| test_description='git rebase interactive |
| |
| This test runs git rebase "interactively", by faking an edit, and verifies |
| that the result still makes sense. |
| |
| Initial setup: |
| |
| one - two - three - four (conflict-branch) |
| / |
| A - B - C - D - E (master) |
| | \ |
| | F - G - H (branch1) |
| | \ |
| |\ I (branch2) |
| | \ |
| | J - K - L - M (no-conflict-branch) |
| \ |
| N - O - P (no-ff-branch) |
| |
| where A, B, D and G all touch file1, and one, two, three, four all |
| touch file "conflict". |
| ' |
| . ./test-lib.sh |
| |
| . "$TEST_DIRECTORY"/lib-rebase.sh |
| |
| # WARNING: Modifications to the initial repository can change the SHA ID used |
| # in the expect2 file for the 'stop on conflicting pick' test. |
| |
| test_expect_success 'setup' ' |
| test_commit A file1 && |
| test_commit B file1 && |
| test_commit C file2 && |
| test_commit D file1 && |
| test_commit E file3 && |
| git checkout -b branch1 A && |
| test_commit F file4 && |
| test_commit G file1 && |
| test_commit H file5 && |
| git checkout -b branch2 F && |
| test_commit I file6 && |
| git checkout -b conflict-branch A && |
| test_commit one conflict && |
| test_commit two conflict && |
| test_commit three conflict && |
| test_commit four conflict && |
| git checkout -b no-conflict-branch A && |
| test_commit J fileJ && |
| test_commit K fileK && |
| test_commit L fileL && |
| test_commit M fileM && |
| git checkout -b no-ff-branch A && |
| test_commit N fileN && |
| test_commit O fileO && |
| test_commit P fileP |
| ' |
| |
| # "exec" commands are run with the user shell by default, but this may |
| # be non-POSIX. For example, if SHELL=zsh then ">file" doesn't work |
| # to create a file. Unsetting SHELL avoids such non-portable behavior |
| # in tests. It must be exported for it to take effect where needed. |
| SHELL= |
| export SHELL |
| |
| test_expect_success 'rebase --keep-empty' ' |
| git checkout -b emptybranch master && |
| git commit --allow-empty -m "empty" && |
| git rebase --keep-empty -i HEAD~2 && |
| git log --oneline >actual && |
| test_line_count = 6 actual |
| ' |
| |
| test_expect_success 'rebase -i with the exec command' ' |
| git checkout master && |
| ( |
| set_fake_editor && |
| FAKE_LINES="1 exec_>touch-one |
| 2 exec_>touch-two exec_false exec_>touch-three |
| 3 4 exec_>\"touch-file__name_with_spaces\";_>touch-after-semicolon 5" && |
| export FAKE_LINES && |
| test_must_fail git rebase -i A |
| ) && |
| test_path_is_file touch-one && |
| test_path_is_file touch-two && |
| test_path_is_missing touch-three " (should have stopped before)" && |
| test_cmp_rev C HEAD && |
| git rebase --continue && |
| test_path_is_file touch-three && |
| test_path_is_file "touch-file name with spaces" && |
| test_path_is_file touch-after-semicolon && |
| test_cmp_rev master HEAD && |
| rm -f touch-* |
| ' |
| |
| test_expect_success 'rebase -i with the exec command runs from tree root' ' |
| git checkout master && |
| mkdir subdir && (cd subdir && |
| set_fake_editor && |
| FAKE_LINES="1 exec_>touch-subdir" \ |
| git rebase -i HEAD^ |
| ) && |
| test_path_is_file touch-subdir && |
| rm -fr subdir |
| ' |
| |
| test_expect_success 'rebase -i with exec allows git commands in subdirs' ' |
| test_when_finished "rm -rf subdir" && |
| test_when_finished "git rebase --abort ||:" && |
| git checkout master && |
| mkdir subdir && (cd subdir && |
| set_fake_editor && |
| FAKE_LINES="1 x_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \ |
| git rebase -i HEAD^ |
| ) |
| ' |
| |
| test_expect_success 'rebase -i sets work tree properly' ' |
| test_when_finished "rm -rf subdir" && |
| test_when_finished "test_might_fail git rebase --abort" && |
| mkdir subdir && |
| git rebase -x "(cd subdir && git rev-parse --show-toplevel)" HEAD^ \ |
| >actual && |
| ! grep "/subdir$" actual |
| ' |
| |
| test_expect_success 'rebase -i with the exec command checks tree cleanness' ' |
| git checkout master && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" git rebase -i HEAD^ && |
| test_cmp_rev master^ HEAD && |
| git reset --hard && |
| git rebase --continue |
| ' |
| |
| test_expect_success 'rebase -i with exec of inexistent command' ' |
| git checkout master && |
| test_when_finished "git rebase --abort" && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \ |
| git rebase -i HEAD^ >actual 2>&1 && |
| ! grep "Maybe git-rebase is broken" actual |
| ' |
| |
| test_expect_success 'no changes are a nop' ' |
| git checkout branch2 && |
| set_fake_editor && |
| git rebase -i F && |
| test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && |
| test $(git rev-parse I) = $(git rev-parse HEAD) |
| ' |
| |
| test_expect_success 'test the [branch] option' ' |
| git checkout -b dead-end && |
| git rm file6 && |
| git commit -m "stop here" && |
| set_fake_editor && |
| git rebase -i F branch2 && |
| test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && |
| test $(git rev-parse I) = $(git rev-parse branch2) && |
| test $(git rev-parse I) = $(git rev-parse HEAD) |
| ' |
| |
| test_expect_success 'test --onto <branch>' ' |
| git checkout -b test-onto branch2 && |
| set_fake_editor && |
| git rebase -i --onto branch1 F && |
| test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" && |
| test $(git rev-parse HEAD^) = $(git rev-parse branch1) && |
| test $(git rev-parse I) = $(git rev-parse branch2) |
| ' |
| |
| test_expect_success 'rebase on top of a non-conflicting commit' ' |
| git checkout branch1 && |
| git tag original-branch1 && |
| set_fake_editor && |
| git rebase -i branch2 && |
| test file6 = $(git diff --name-only original-branch1) && |
| test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && |
| test $(git rev-parse I) = $(git rev-parse branch2) && |
| test $(git rev-parse I) = $(git rev-parse HEAD~2) |
| ' |
| |
| test_expect_success 'reflog for the branch shows state before rebase' ' |
| test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1) |
| ' |
| |
| test_expect_success 'reflog for the branch shows correct finish message' ' |
| printf "rebase -i (finish): refs/heads/branch1 onto %s\n" \ |
| "$(git rev-parse branch2)" >expected && |
| git log -g --pretty=%gs -1 refs/heads/branch1 >actual && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'exchange two commits' ' |
| set_fake_editor && |
| FAKE_LINES="2 1" git rebase -i HEAD~2 && |
| test H = $(git cat-file commit HEAD^ | sed -ne \$p) && |
| test G = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| cat > expect << EOF |
| diff --git a/file1 b/file1 |
| index f70f10e..fd79235 100644 |
| --- a/file1 |
| +++ b/file1 |
| @@ -1 +1 @@ |
| -A |
| +G |
| EOF |
| |
| cat > expect2 << EOF |
| <<<<<<< HEAD |
| D |
| ======= |
| G |
| >>>>>>> 5d18e54... G |
| EOF |
| |
| test_expect_success 'stop on conflicting pick' ' |
| git tag new-branch1 && |
| set_fake_editor && |
| test_must_fail git rebase -i master && |
| test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" && |
| test_cmp expect .git/rebase-merge/patch && |
| test_cmp expect2 file1 && |
| test "$(git diff --name-status | |
| sed -n -e "/^U/s/^U[^a-z]*//p")" = file1 && |
| test 4 = $(grep -v "^#" < .git/rebase-merge/done | wc -l) && |
| test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo) |
| ' |
| |
| test_expect_success 'show conflicted patch' ' |
| GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && |
| grep "show.*REBASE_HEAD" stderr && |
| # the original stopped-sha1 is abbreviated |
| stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" && |
| test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1" |
| ' |
| |
| test_expect_success 'abort' ' |
| git rebase --abort && |
| test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && |
| test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && |
| test_path_is_missing .git/rebase-merge |
| ' |
| |
| test_expect_success 'abort with error when new base cannot be checked out' ' |
| git rm --cached file1 && |
| git commit -m "remove file in base" && |
| set_fake_editor && |
| test_must_fail git rebase -i master > output 2>&1 && |
| test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \ |
| output && |
| test_i18ngrep "file1" output && |
| test_path_is_missing .git/rebase-merge && |
| git reset --hard HEAD^ |
| ' |
| |
| test_expect_success 'retain authorship' ' |
| echo A > file7 && |
| git add file7 && |
| test_tick && |
| GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && |
| git tag twerp && |
| set_fake_editor && |
| git rebase -i --onto master HEAD^ && |
| git show HEAD | grep "^Author: Twerp Snog" |
| ' |
| |
| test_expect_success 'retain authorship w/ conflicts' ' |
| oGIT_AUTHOR_NAME=$GIT_AUTHOR_NAME && |
| test_when_finished "GIT_AUTHOR_NAME=\$oGIT_AUTHOR_NAME" && |
| |
| git reset --hard twerp && |
| test_commit a conflict a conflict-a && |
| git reset --hard twerp && |
| |
| GIT_AUTHOR_NAME=AttributeMe && |
| export GIT_AUTHOR_NAME && |
| test_commit b conflict b conflict-b && |
| GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME && |
| |
| set_fake_editor && |
| test_must_fail git rebase -i conflict-a && |
| echo resolved >conflict && |
| git add conflict && |
| git rebase --continue && |
| test $(git rev-parse conflict-a^0) = $(git rev-parse HEAD^) && |
| git show >out && |
| grep AttributeMe out |
| ' |
| |
| test_expect_success 'squash' ' |
| git reset --hard twerp && |
| echo B > file7 && |
| test_tick && |
| GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 && |
| echo "******************************" && |
| set_fake_editor && |
| FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \ |
| git rebase -i --onto master HEAD~2 && |
| test B = $(cat file7) && |
| test $(git rev-parse HEAD^) = $(git rev-parse master) |
| ' |
| |
| test_expect_success 'retain authorship when squashing' ' |
| git show HEAD | grep "^Author: Twerp Snog" |
| ' |
| |
| test_expect_success '-p handles "no changes" gracefully' ' |
| HEAD=$(git rev-parse HEAD) && |
| set_fake_editor && |
| git rebase -i -p HEAD^ && |
| git update-index --refresh && |
| git diff-files --quiet && |
| git diff-index --quiet --cached HEAD -- && |
| test $HEAD = $(git rev-parse HEAD) |
| ' |
| |
| test_expect_failure 'exchange two commits with -p' ' |
| git checkout H && |
| set_fake_editor && |
| FAKE_LINES="2 1" git rebase -i -p HEAD~2 && |
| test H = $(git cat-file commit HEAD^ | sed -ne \$p) && |
| test G = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| test_expect_success 'preserve merges with -p' ' |
| git checkout -b to-be-preserved master^ && |
| : > unrelated-file && |
| git add unrelated-file && |
| test_tick && |
| git commit -m "unrelated" && |
| git checkout -b another-branch master && |
| echo B > file1 && |
| test_tick && |
| git commit -m J file1 && |
| test_tick && |
| git merge to-be-preserved && |
| echo C > file1 && |
| test_tick && |
| git commit -m K file1 && |
| echo D > file1 && |
| test_tick && |
| git commit -m L1 file1 && |
| git checkout HEAD^ && |
| echo 1 > unrelated-file && |
| test_tick && |
| git commit -m L2 unrelated-file && |
| test_tick && |
| git merge another-branch && |
| echo E > file1 && |
| test_tick && |
| git commit -m M file1 && |
| git checkout -b to-be-rebased && |
| test_tick && |
| set_fake_editor && |
| git rebase -i -p --onto branch1 master && |
| git update-index --refresh && |
| git diff-files --quiet && |
| git diff-index --quiet --cached HEAD -- && |
| test $(git rev-parse HEAD~6) = $(git rev-parse branch1) && |
| test $(git rev-parse HEAD~4^2) = $(git rev-parse to-be-preserved) && |
| test $(git rev-parse HEAD^^2^) = $(git rev-parse HEAD^^^) && |
| test $(git show HEAD~5:file1) = B && |
| test $(git show HEAD~3:file1) = C && |
| test $(git show HEAD:file1) = E && |
| test $(git show HEAD:unrelated-file) = 1 |
| ' |
| |
| test_expect_success 'edit ancestor with -p' ' |
| set_fake_editor && |
| FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 && |
| echo 2 > unrelated-file && |
| test_tick && |
| git commit -m L2-modified --amend unrelated-file && |
| git rebase --continue && |
| git update-index --refresh && |
| git diff-files --quiet && |
| git diff-index --quiet --cached HEAD -- && |
| test $(git show HEAD:unrelated-file) = 2 |
| ' |
| |
| test_expect_success '--continue tries to commit' ' |
| test_tick && |
| set_fake_editor && |
| test_must_fail git rebase -i --onto new-branch1 HEAD^ && |
| echo resolved > file1 && |
| git add file1 && |
| FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && |
| test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) && |
| git show HEAD | grep chouette |
| ' |
| |
| test_expect_success 'verbose flag is heeded, even after --continue' ' |
| git reset --hard master@{1} && |
| test_tick && |
| set_fake_editor && |
| test_must_fail git rebase -v -i --onto new-branch1 HEAD^ && |
| echo resolved > file1 && |
| git add file1 && |
| git rebase --continue > output && |
| grep "^ file1 | 2 +-$" output |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \ |
| EXPECT_HEADER_COUNT=4 \ |
| git rebase -i $base && |
| test $base = $(git rev-parse HEAD^) && |
| test 1 = $(git show | grep ONCE | wc -l) |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' |
| git checkout -b multi-fixup E && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| FAKE_COMMIT_AMEND="NEVER" FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \ |
| git rebase -i $base && |
| test $base = $(git rev-parse HEAD^) && |
| test 0 = $(git show | grep NEVER | wc -l) && |
| git checkout to-be-rebased && |
| git branch -D multi-fixup |
| ' |
| |
| test_expect_success 'commit message used after conflict' ' |
| git checkout -b conflict-fixup conflict-branch && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" git rebase -i $base && |
| echo three > conflict && |
| git add conflict && |
| FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \ |
| git rebase --continue && |
| test $base = $(git rev-parse HEAD^) && |
| test 1 = $(git show | grep ONCE | wc -l) && |
| git checkout to-be-rebased && |
| git branch -D conflict-fixup |
| ' |
| |
| test_expect_success 'commit message retained after conflict' ' |
| git checkout -b conflict-squash conflict-branch && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 fixup 3 squash 4" git rebase -i $base && |
| echo three > conflict && |
| git add conflict && |
| FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \ |
| git rebase --continue && |
| test $base = $(git rev-parse HEAD^) && |
| test 2 = $(git show | grep TWICE | wc -l) && |
| git checkout to-be-rebased && |
| git branch -D conflict-squash |
| ' |
| |
| cat > expect-squash-fixup << EOF |
| B |
| |
| D |
| |
| ONCE |
| EOF |
| |
| test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' |
| git checkout -b squash-fixup E && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 fixup 2 squash 3 fixup 4" \ |
| EXPECT_HEADER_COUNT=4 \ |
| git rebase -i $base && |
| git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && |
| test_cmp expect-squash-fixup actual-squash-fixup && |
| git cat-file commit HEAD@{2} | |
| grep "^# This is a combination of 3 commits\." && |
| git cat-file commit HEAD@{3} | |
| grep "^# This is a combination of 2 commits\." && |
| git checkout to-be-rebased && |
| git branch -D squash-fixup |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' |
| git checkout -b skip-comments E && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \ |
| EXPECT_HEADER_COUNT=4 \ |
| git rebase -i $base && |
| test $base = $(git rev-parse HEAD^) && |
| test 1 = $(git show | grep ONCE | wc -l) && |
| git checkout to-be-rebased && |
| git branch -D skip-comments |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' |
| git checkout -b skip-blank-lines E && |
| base=$(git rev-parse HEAD~4) && |
| set_fake_editor && |
| FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \ |
| EXPECT_HEADER_COUNT=4 \ |
| git rebase -i $base && |
| test $base = $(git rev-parse HEAD^) && |
| test 1 = $(git show | grep ONCE | wc -l) && |
| git checkout to-be-rebased && |
| git branch -D skip-blank-lines |
| ' |
| |
| test_expect_success 'squash works as expected' ' |
| git checkout -b squash-works no-conflict-branch && |
| one=$(git rev-parse HEAD~3) && |
| set_fake_editor && |
| FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 \ |
| git rebase -i HEAD~3 && |
| test $one = $(git rev-parse HEAD~2) |
| ' |
| |
| test_expect_success 'interrupted squash works as expected' ' |
| git checkout -b interrupted-squash conflict-branch && |
| one=$(git rev-parse HEAD~3) && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 && |
| test_write_lines one two four > conflict && |
| git add conflict && |
| test_must_fail git rebase --continue && |
| echo resolved > conflict && |
| git add conflict && |
| git rebase --continue && |
| test $one = $(git rev-parse HEAD~2) |
| ' |
| |
| test_expect_success 'interrupted squash works as expected (case 2)' ' |
| git checkout -b interrupted-squash2 conflict-branch && |
| one=$(git rev-parse HEAD~3) && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 && |
| test_write_lines one four > conflict && |
| git add conflict && |
| test_must_fail git rebase --continue && |
| test_write_lines one two four > conflict && |
| git add conflict && |
| test_must_fail git rebase --continue && |
| echo resolved > conflict && |
| git add conflict && |
| git rebase --continue && |
| test $one = $(git rev-parse HEAD~2) |
| ' |
| |
| test_expect_success '--continue tries to commit, even for "edit"' ' |
| echo unrelated > file7 && |
| git add file7 && |
| test_tick && |
| git commit -m "unrelated change" && |
| parent=$(git rev-parse HEAD^) && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="edit 1" git rebase -i HEAD^ && |
| echo edited > file7 && |
| git add file7 && |
| FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && |
| test edited = $(git show HEAD:file7) && |
| git show HEAD | grep chouette && |
| test $parent = $(git rev-parse HEAD^) |
| ' |
| |
| test_expect_success 'aborted --continue does not squash commits after "edit"' ' |
| old=$(git rev-parse HEAD) && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="edit 1" git rebase -i HEAD^ && |
| echo "edited again" > file7 && |
| git add file7 && |
| test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue && |
| test $old = $(git rev-parse HEAD) && |
| git rebase --abort |
| ' |
| |
| test_expect_success 'auto-amend only edited commits after "edit"' ' |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="edit 1" git rebase -i HEAD^ && |
| echo "edited again" > file7 && |
| git add file7 && |
| FAKE_COMMIT_MESSAGE="edited file7 again" git commit && |
| echo "and again" > file7 && |
| git add file7 && |
| test_tick && |
| test_must_fail env FAKE_COMMIT_MESSAGE="and again" git rebase --continue && |
| git rebase --abort |
| ' |
| |
| test_expect_success 'clean error after failed "exec"' ' |
| test_tick && |
| test_when_finished "git rebase --abort || :" && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ && |
| echo "edited again" > file7 && |
| git add file7 && |
| test_must_fail git rebase --continue 2>error && |
| test_i18ngrep "you have staged changes in your working tree" error |
| ' |
| |
| test_expect_success 'rebase a detached HEAD' ' |
| grandparent=$(git rev-parse HEAD~2) && |
| git checkout $(git rev-parse HEAD) && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="2 1" git rebase -i HEAD~2 && |
| test $grandparent = $(git rev-parse HEAD~2) |
| ' |
| |
| test_expect_success 'rebase a commit violating pre-commit' ' |
| |
| mkdir -p .git/hooks && |
| write_script .git/hooks/pre-commit <<-\EOF && |
| test -z "$(git diff --cached --check)" |
| EOF |
| echo "monde! " >> file1 && |
| test_tick && |
| test_must_fail git commit -m doesnt-verify file1 && |
| git commit -m doesnt-verify --no-verify file1 && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES=2 git rebase -i HEAD~2 |
| |
| ' |
| |
| test_expect_success 'rebase with a file named HEAD in worktree' ' |
| |
| rm -fr .git/hooks && |
| git reset --hard && |
| git checkout -b branch3 A && |
| |
| ( |
| GIT_AUTHOR_NAME="Squashed Away" && |
| export GIT_AUTHOR_NAME && |
| >HEAD && |
| git add HEAD && |
| git commit -m "Add head" && |
| >BODY && |
| git add BODY && |
| git commit -m "Add body" |
| ) && |
| |
| set_fake_editor && |
| FAKE_LINES="1 squash 2" git rebase -i to-be-rebased && |
| test "$(git show -s --pretty=format:%an)" = "Squashed Away" |
| |
| ' |
| |
| test_expect_success 'do "noop" when there is nothing to cherry-pick' ' |
| |
| git checkout -b branch4 HEAD && |
| GIT_EDITOR=: git commit --amend \ |
| --author="Somebody else <somebody@else.com>" && |
| test $(git rev-parse branch3) != $(git rev-parse branch4) && |
| set_fake_editor && |
| git rebase -i branch3 && |
| test $(git rev-parse branch3) = $(git rev-parse branch4) |
| |
| ' |
| |
| test_expect_success 'submodule rebase setup' ' |
| git checkout A && |
| mkdir sub && |
| ( |
| cd sub && git init && >elif && |
| git add elif && git commit -m "submodule initial" |
| ) && |
| echo 1 >file1 && |
| git add file1 sub && |
| test_tick && |
| git commit -m "One" && |
| echo 2 >file1 && |
| test_tick && |
| git commit -a -m "Two" && |
| ( |
| cd sub && echo 3 >elif && |
| git commit -a -m "submodule second" |
| ) && |
| test_tick && |
| set_fake_editor && |
| git commit -a -m "Three changes submodule" |
| ' |
| |
| test_expect_success 'submodule rebase -i' ' |
| set_fake_editor && |
| FAKE_LINES="1 squash 2 3" git rebase -i A |
| ' |
| |
| test_expect_success 'submodule conflict setup' ' |
| git tag submodule-base && |
| git checkout HEAD^ && |
| ( |
| cd sub && git checkout HEAD^ && echo 4 >elif && |
| git add elif && git commit -m "submodule conflict" |
| ) && |
| git add sub && |
| test_tick && |
| git commit -m "Conflict in submodule" && |
| git tag submodule-topic |
| ' |
| |
| test_expect_success 'rebase -i continue with only submodule staged' ' |
| set_fake_editor && |
| test_must_fail git rebase -i submodule-base && |
| git add sub && |
| git rebase --continue && |
| test $(git rev-parse submodule-base) != $(git rev-parse HEAD) |
| ' |
| |
| test_expect_success 'rebase -i continue with unstaged submodule' ' |
| git checkout submodule-topic && |
| git reset --hard && |
| set_fake_editor && |
| test_must_fail git rebase -i submodule-base && |
| git reset && |
| git rebase --continue && |
| test $(git rev-parse submodule-base) = $(git rev-parse HEAD) |
| ' |
| |
| test_expect_success 'avoid unnecessary reset' ' |
| git checkout master && |
| git reset --hard && |
| test-tool chmtime =123456789 file3 && |
| git update-index --refresh && |
| HEAD=$(git rev-parse HEAD) && |
| set_fake_editor && |
| git rebase -i HEAD~4 && |
| test $HEAD = $(git rev-parse HEAD) && |
| MTIME=$(test-tool chmtime --get file3) && |
| test 123456789 = $MTIME |
| ' |
| |
| test_expect_success 'reword' ' |
| git checkout -b reword-branch master && |
| set_fake_editor && |
| FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" git rebase -i A && |
| git show HEAD | grep "E changed" && |
| test $(git rev-parse master) != $(git rev-parse HEAD) && |
| test $(git rev-parse master^) = $(git rev-parse HEAD^) && |
| FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" git rebase -i A && |
| git show HEAD^ | grep "D changed" && |
| FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" git rebase -i A && |
| git show HEAD~3 | grep "B changed" && |
| FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A && |
| git show HEAD~2 | grep "C changed" |
| ' |
| |
| test_expect_success 'rebase -i can copy notes' ' |
| git config notes.rewrite.rebase true && |
| git config notes.rewriteRef "refs/notes/*" && |
| test_commit n1 && |
| test_commit n2 && |
| test_commit n3 && |
| git notes add -m"a note" n3 && |
| set_fake_editor && |
| git rebase -i --onto n1 n2 && |
| test "a note" = "$(git notes show HEAD)" |
| ' |
| |
| cat >expect <<EOF |
| an earlier note |
| |
| a note |
| EOF |
| |
| test_expect_success 'rebase -i can copy notes over a fixup' ' |
| git reset --hard n3 && |
| git notes add -m"an earlier note" n2 && |
| set_fake_editor && |
| GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" git rebase -i n1 && |
| git notes show > output && |
| test_cmp expect output |
| ' |
| |
| test_expect_success 'rebase while detaching HEAD' ' |
| git symbolic-ref HEAD && |
| grandparent=$(git rev-parse HEAD~2) && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 && |
| test $grandparent = $(git rev-parse HEAD~2) && |
| test_must_fail git symbolic-ref HEAD |
| ' |
| |
| test_tick # Ensure that the rebased commits get a different timestamp. |
| test_expect_success 'always cherry-pick with --no-ff' ' |
| git checkout no-ff-branch && |
| git tag original-no-ff-branch && |
| set_fake_editor && |
| git rebase -i --no-ff A && |
| for p in 0 1 2 |
| do |
| test ! $(git rev-parse HEAD~$p) = $(git rev-parse original-no-ff-branch~$p) && |
| git diff HEAD~$p original-no-ff-branch~$p > out && |
| test_must_be_empty out |
| done && |
| test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) && |
| git diff HEAD~3 original-no-ff-branch~3 > out && |
| test_must_be_empty out |
| ' |
| |
| test_expect_success 'set up commits with funny messages' ' |
| git checkout -b funny A && |
| echo >>file1 && |
| test_tick && |
| git commit -a -m "end with slash\\" && |
| echo >>file1 && |
| test_tick && |
| git commit -a -m "something (\000) that looks like octal" && |
| echo >>file1 && |
| test_tick && |
| git commit -a -m "something (\n) that looks like a newline" && |
| echo >>file1 && |
| test_tick && |
| git commit -a -m "another commit" |
| ' |
| |
| test_expect_success 'rebase-i history with funny messages' ' |
| git rev-list A..funny >expect && |
| test_tick && |
| set_fake_editor && |
| FAKE_LINES="1 2 3 4" git rebase -i A && |
| git rev-list A.. >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'prepare for rebase -i --exec' ' |
| git checkout master && |
| git checkout -b execute && |
| test_commit one_exec main.txt one_exec && |
| test_commit two_exec main.txt two_exec && |
| test_commit three_exec main.txt three_exec |
| ' |
| |
| test_expect_success 'running "git rebase -i --exec git show HEAD"' ' |
| set_fake_editor && |
| git rebase -i --exec "git show HEAD" HEAD~2 >actual && |
| ( |
| FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && |
| export FAKE_LINES && |
| git rebase -i HEAD~2 >expect |
| ) && |
| sed -e "1,9d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'running "git rebase --exec git show HEAD -i"' ' |
| git reset --hard execute && |
| set_fake_editor && |
| git rebase --exec "git show HEAD" -i HEAD~2 >actual && |
| ( |
| FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && |
| export FAKE_LINES && |
| git rebase -i HEAD~2 >expect |
| ) && |
| sed -e "1,9d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'running "git rebase -ix git show HEAD"' ' |
| git reset --hard execute && |
| set_fake_editor && |
| git rebase -ix "git show HEAD" HEAD~2 >actual && |
| ( |
| FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && |
| export FAKE_LINES && |
| git rebase -i HEAD~2 >expect |
| ) && |
| sed -e "1,9d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| |
| test_expect_success 'rebase -ix with several <CMD>' ' |
| git reset --hard execute && |
| set_fake_editor && |
| git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && |
| ( |
| FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" && |
| export FAKE_LINES && |
| git rebase -i HEAD~2 >expect |
| ) && |
| sed -e "1,9d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'rebase -ix with several instances of --exec' ' |
| git reset --hard execute && |
| set_fake_editor && |
| git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && |
| ( |
| FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2 |
| exec_git_show_HEAD exec_pwd" && |
| export FAKE_LINES && |
| git rebase -i HEAD~2 >expect |
| ) && |
| sed -e "1,11d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' ' |
| git reset --hard execute && |
| git checkout -b autosquash && |
| echo second >second.txt && |
| git add second.txt && |
| git commit -m "fixup! two_exec" && |
| echo bis >bis.txt && |
| git add bis.txt && |
| git commit -m "fixup! two_exec" && |
| set_fake_editor && |
| ( |
| git checkout -b autosquash_actual && |
| git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual |
| ) && |
| git checkout autosquash && |
| ( |
| git checkout -b autosquash_expected && |
| FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" && |
| export FAKE_LINES && |
| git rebase -i HEAD~4 >expect |
| ) && |
| sed -e "1,13d" expect >expected && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'rebase --exec works without -i ' ' |
| git reset --hard execute && |
| rm -rf exec_output && |
| EDITOR="echo >invoked_editor" git rebase --exec "echo a line >>exec_output" HEAD~2 2>actual && |
| test_i18ngrep "Successfully rebased and updated" actual && |
| test_line_count = 2 exec_output && |
| test_path_is_missing invoked_editor |
| ' |
| |
| test_expect_success 'rebase -i --exec without <CMD>' ' |
| git reset --hard execute && |
| set_fake_editor && |
| test_must_fail git rebase -i --exec 2>actual && |
| test_i18ngrep "requires a value" actual && |
| git checkout master |
| ' |
| |
| test_expect_success 'rebase -i --root re-order and drop commits' ' |
| git checkout E && |
| set_fake_editor && |
| FAKE_LINES="3 1 2 5" git rebase -i --root && |
| test E = $(git cat-file commit HEAD | sed -ne \$p) && |
| test B = $(git cat-file commit HEAD^ | sed -ne \$p) && |
| test A = $(git cat-file commit HEAD^^ | sed -ne \$p) && |
| test C = $(git cat-file commit HEAD^^^ | sed -ne \$p) && |
| test 0 = $(git cat-file commit HEAD^^^ | grep -c ^parent\ ) |
| ' |
| |
| test_expect_success 'rebase -i --root retain root commit author and message' ' |
| git checkout A && |
| echo B >file7 && |
| git add file7 && |
| GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && |
| set_fake_editor && |
| FAKE_LINES="2" git rebase -i --root && |
| git cat-file commit HEAD | grep -q "^author Twerp Snog" && |
| git cat-file commit HEAD | grep -q "^different author$" |
| ' |
| |
| test_expect_success 'rebase -i --root temporary sentinel commit' ' |
| git checkout B && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="2" git rebase -i --root && |
| git cat-file commit HEAD | grep "^tree 4b825dc642cb" && |
| git rebase --abort |
| ' |
| |
| test_expect_success 'rebase -i --root fixup root commit' ' |
| git checkout B && |
| set_fake_editor && |
| FAKE_LINES="1 fixup 2" git rebase -i --root && |
| test A = $(git cat-file commit HEAD | sed -ne \$p) && |
| test B = $(git show HEAD:file1) && |
| test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) |
| ' |
| |
| test_expect_success 'rebase -i --root reword root commit' ' |
| test_when_finished "test_might_fail git rebase --abort" && |
| git checkout -b reword-root-branch master && |
| set_fake_editor && |
| FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ |
| git rebase -i --root && |
| git show HEAD^ | grep "A changed" && |
| test -z "$(git show -s --format=%p HEAD^)" |
| ' |
| |
| test_expect_success 'rebase -i --root when root has untracked file confilct' ' |
| test_when_finished "reset_rebase" && |
| git checkout -b failing-root-pick A && |
| echo x >file2 && |
| git rm file1 && |
| git commit -m "remove file 1 add file 2" && |
| echo z >file1 && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 2" git rebase -i --root && |
| rm file1 && |
| git rebase --continue && |
| test "$(git log -1 --format=%B)" = "remove file 1 add file 2" && |
| test "$(git rev-list --count HEAD)" = 2 |
| ' |
| |
| test_expect_success 'rebase -i --root reword root when root has untracked file conflict' ' |
| test_when_finished "reset_rebase" && |
| echo z>file1 && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="reword 1 2" \ |
| FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && |
| rm file1 && |
| FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue && |
| test "$(git log -1 --format=%B HEAD^)" = "Reworded A" && |
| test "$(git rev-list --count HEAD)" = 2 |
| ' |
| |
| test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' ' |
| git checkout reword-root-branch && |
| git reset --hard && |
| git checkout conflict-branch && |
| set_fake_editor && |
| test_must_fail git rebase --onto HEAD~2 HEAD~ && |
| test_must_fail git rebase --edit-todo && |
| git rebase --abort |
| ' |
| |
| test_expect_success 'rebase --edit-todo can be used to modify todo' ' |
| git reset --hard && |
| git checkout no-conflict-branch^0 && |
| set_fake_editor && |
| FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && |
| FAKE_LINES="2 1" git rebase --edit-todo && |
| git rebase --continue && |
| test M = $(git cat-file commit HEAD^ | sed -ne \$p) && |
| test L = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| test_expect_success 'rebase -i produces readable reflog' ' |
| git reset --hard && |
| git branch -f branch-reflog-test H && |
| set_fake_editor && |
| git rebase -i --onto I F branch-reflog-test && |
| cat >expect <<-\EOF && |
| rebase -i (finish): returning to refs/heads/branch-reflog-test |
| rebase -i (pick): H |
| rebase -i (pick): G |
| rebase -i (start): checkout I |
| EOF |
| git reflog -n4 HEAD | |
| sed "s/[^:]*: //" >actual && |
| test_cmp expect actual |
| ' |
| |
| test_expect_success 'rebase -i respects core.commentchar' ' |
| git reset --hard && |
| git checkout E^0 && |
| test_config core.commentchar "\\" && |
| write_script remove-all-but-first.sh <<-\EOF && |
| sed -e "2,\$s/^/\\\\/" "$1" >"$1.tmp" && |
| mv "$1.tmp" "$1" |
| EOF |
| test_set_editor "$(pwd)/remove-all-but-first.sh" && |
| git rebase -i B && |
| test B = $(git cat-file commit HEAD^ | sed -ne \$p) |
| ' |
| |
| test_expect_success 'rebase -i respects core.commentchar=auto' ' |
| test_config core.commentchar auto && |
| write_script copy-edit-script.sh <<-\EOF && |
| cp "$1" edit-script |
| EOF |
| test_set_editor "$(pwd)/copy-edit-script.sh" && |
| test_when_finished "git rebase --abort || :" && |
| git rebase -i HEAD^ && |
| test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)" |
| ' |
| |
| test_expect_success 'rebase -i, with <onto> and <upstream> specified as :/quuxery' ' |
| test_when_finished "git branch -D torebase" && |
| git checkout -b torebase branch1 && |
| upstream=$(git rev-parse ":/J") && |
| onto=$(git rev-parse ":/A") && |
| git rebase --onto $onto $upstream && |
| git reset --hard branch1 && |
| git rebase --onto ":/A" ":/J" && |
| git checkout branch1 |
| ' |
| |
| test_expect_success 'rebase -i with --strategy and -X' ' |
| git checkout -b conflict-merge-use-theirs conflict-branch && |
| git reset --hard HEAD^ && |
| echo five >conflict && |
| echo Z >file1 && |
| git commit -a -m "one file conflict" && |
| EDITOR=true git rebase -i --strategy=recursive -Xours conflict-branch && |
| test $(git show conflict-branch:conflict) = $(cat conflict) && |
| test $(cat file1) = Z |
| ' |
| |
| test_expect_success 'interrupted rebase -i with --strategy and -X' ' |
| git checkout -b conflict-merge-use-theirs-interrupted conflict-branch && |
| git reset --hard HEAD^ && |
| >breakpoint && |
| git add breakpoint && |
| git commit -m "breakpoint for interactive mode" && |
| echo five >conflict && |
| echo Z >file1 && |
| git commit -a -m "one file conflict" && |
| set_fake_editor && |
| FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch && |
| git rebase --continue && |
| test $(git show conflict-branch:conflict) = $(cat conflict) && |
| test $(cat file1) = Z |
| ' |
| |
| test_expect_success 'rebase -i error on commits with \ in message' ' |
| current_head=$(git rev-parse HEAD) && |
| test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" && |
| test_commit TO-REMOVE will-conflict old-content && |
| test_commit "\temp" will-conflict new-content dummy && |
| test_must_fail env EDITOR=true git rebase -i HEAD^ --onto HEAD^^ 2>error && |
| test_expect_code 1 grep " emp" error |
| ' |
| |
| test_expect_success 'short SHA-1 setup' ' |
| test_when_finished "git checkout master" && |
| git checkout --orphan collide && |
| git rm -rf . && |
| ( |
| unset test_tick && |
| test_commit collide1 collide && |
| test_commit --notick collide2 collide && |
| test_commit --notick collide3 collide |
| ) |
| ' |
| |
| test_expect_success 'short SHA-1 collide' ' |
| test_when_finished "reset_rebase && git checkout master" && |
| git checkout collide && |
| ( |
| unset test_tick && |
| test_tick && |
| set_fake_editor && |
| FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \ |
| FAKE_LINES="reword 1 2" git rebase -i HEAD~2 |
| ) |
| ' |
| |
| test_expect_success 'respect core.abbrev' ' |
| git config core.abbrev 12 && |
| set_cat_todo_editor && |
| test_must_fail git rebase -i HEAD~4 >todo-list && |
| test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list) |
| ' |
| |
| test_expect_success 'todo count' ' |
| write_script dump-raw.sh <<-\EOF && |
| cat "$1" |
| EOF |
| test_set_editor "$(pwd)/dump-raw.sh" && |
| git rebase -i HEAD~4 >actual && |
| test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual |
| ' |
| |
| test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' |
| git checkout --force branch2 && |
| git clean -f && |
| set_fake_editor && |
| FAKE_LINES="edit 1 2" git rebase -i A && |
| test_cmp_rev HEAD F && |
| test_path_is_missing file6 && |
| >file6 && |
| test_must_fail git rebase --continue && |
| test_cmp_rev HEAD F && |
| rm file6 && |
| git rebase --continue && |
| test_cmp_rev HEAD I |
| ' |
| |
| test_expect_success 'rebase -i commits that overwrite untracked files (squash)' ' |
| git checkout --force branch2 && |
| git clean -f && |
| git tag original-branch2 && |
| set_fake_editor && |
| FAKE_LINES="edit 1 squash 2" git rebase -i A && |
| test_cmp_rev HEAD F && |
| test_path_is_missing file6 && |
| >file6 && |
| test_must_fail git rebase --continue && |
| test_cmp_rev HEAD F && |
| rm file6 && |
| git rebase --continue && |
| test $(git cat-file commit HEAD | sed -ne \$p) = I && |
| git reset --hard original-branch2 |
| ' |
| |
| test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' ' |
| git checkout --force branch2 && |
| git clean -f && |
| set_fake_editor && |
| FAKE_LINES="edit 1 2" git rebase -i --no-ff A && |
| test $(git cat-file commit HEAD | sed -ne \$p) = F && |
| test_path_is_missing file6 && |
| >file6 && |
| test_must_fail git rebase --continue && |
| test $(git cat-file commit HEAD | sed -ne \$p) = F && |
| rm file6 && |
| git rebase --continue && |
| test $(git cat-file commit HEAD | sed -ne \$p) = I |
| ' |
| |
| test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' ' |
| git checkout -b commit-to-skip && |
| for double in X 3 1 |
| do |
| test_seq 5 | sed "s/$double/&&/" >seq && |
| git add seq && |
| test_tick && |
| git commit -m seq-$double |
| done && |
| git tag seq-onto && |
| git reset --hard HEAD~2 && |
| git cherry-pick seq-onto && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES= git rebase -i seq-onto && |
| test -d .git/rebase-merge && |
| git rebase --continue && |
| git diff --exit-code seq-onto && |
| test ! -d .git/rebase-merge && |
| test ! -f .git/CHERRY_PICK_HEAD |
| ' |
| |
| rebase_setup_and_clean () { |
| test_when_finished " |
| git checkout master && |
| test_might_fail git branch -D $1 && |
| test_might_fail git rebase --abort |
| " && |
| git checkout -b $1 ${2:-master} |
| } |
| |
| test_expect_success 'drop' ' |
| rebase_setup_and_clean drop-test && |
| set_fake_editor && |
| FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root && |
| test E = $(git cat-file commit HEAD | sed -ne \$p) && |
| test C = $(git cat-file commit HEAD^ | sed -ne \$p) && |
| test A = $(git cat-file commit HEAD^^ | sed -ne \$p) |
| ' |
| |
| test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' |
| test_config rebase.missingCommitsCheck ignore && |
| rebase_setup_and_clean missing-commit && |
| set_fake_editor && |
| FAKE_LINES="1 2 3 4" \ |
| git rebase -i --root 2>actual && |
| test D = $(git cat-file commit HEAD | sed -ne \$p) && |
| test_i18ngrep \ |
| "Successfully rebased and updated refs/heads/missing-commit" \ |
| actual |
| ' |
| |
| cat >expect <<EOF |
| Warning: some commits may have been dropped accidentally. |
| Dropped commits (newer to older): |
| - $(git rev-list --pretty=oneline --abbrev-commit -1 master) |
| To avoid this message, use "drop" to explicitly remove a commit. |
| |
| Use 'git config rebase.missingCommitsCheck' to change the level of warnings. |
| The possible behaviours are: ignore, warn, error. |
| |
| Rebasing (1/4) |
| Rebasing (2/4) |
| Rebasing (3/4) |
| Rebasing (4/4) |
| Successfully rebased and updated refs/heads/missing-commit. |
| EOF |
| |
| cr_to_nl () { |
| tr '\015' '\012' |
| } |
| |
| test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' |
| test_config rebase.missingCommitsCheck warn && |
| rebase_setup_and_clean missing-commit && |
| set_fake_editor && |
| FAKE_LINES="1 2 3 4" \ |
| git rebase -i --root 2>actual.2 && |
| cr_to_nl <actual.2 >actual && |
| test_i18ncmp expect actual && |
| test D = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| cat >expect <<EOF |
| Warning: some commits may have been dropped accidentally. |
| Dropped commits (newer to older): |
| - $(git rev-list --pretty=oneline --abbrev-commit -1 master) |
| - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) |
| To avoid this message, use "drop" to explicitly remove a commit. |
| |
| Use 'git config rebase.missingCommitsCheck' to change the level of warnings. |
| The possible behaviours are: ignore, warn, error. |
| |
| You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. |
| Or you can abort the rebase with 'git rebase --abort'. |
| EOF |
| |
| test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' |
| test_config rebase.missingCommitsCheck error && |
| rebase_setup_and_clean missing-commit && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 2 4" \ |
| git rebase -i --root 2>actual && |
| test_i18ncmp expect actual && |
| cp .git/rebase-merge/git-rebase-todo.backup \ |
| .git/rebase-merge/git-rebase-todo && |
| FAKE_LINES="1 2 drop 3 4 drop 5" \ |
| git rebase --edit-todo && |
| git rebase --continue && |
| test D = $(git cat-file commit HEAD | sed -ne \$p) && |
| test B = $(git cat-file commit HEAD^ | sed -ne \$p) |
| ' |
| |
| test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' ' |
| rebase_setup_and_clean abbrevcmd && |
| test_commit "first" file1.txt "first line" first && |
| test_commit "second" file1.txt "another line" second && |
| test_commit "fixup! first" file2.txt "first line again" first_fixup && |
| test_commit "squash! second" file1.txt "another line here" second_squash && |
| cat >expected <<-EOF && |
| p $(git rev-list --abbrev-commit -1 first) first |
| f $(git rev-list --abbrev-commit -1 first_fixup) fixup! first |
| x git show HEAD |
| p $(git rev-list --abbrev-commit -1 second) second |
| s $(git rev-list --abbrev-commit -1 second_squash) squash! second |
| x git show HEAD |
| EOF |
| git checkout abbrevcmd && |
| set_cat_todo_editor && |
| test_config rebase.abbreviateCommands true && |
| test_must_fail git rebase -i --exec "git show HEAD" \ |
| --autosquash master >actual && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'static check of bad command' ' |
| rebase_setup_and_clean bad-cmd && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ |
| git rebase -i --root 2>actual && |
| test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" actual && |
| test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && |
| FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && |
| git rebase --continue && |
| test E = $(git cat-file commit HEAD | sed -ne \$p) && |
| test C = $(git cat-file commit HEAD^ | sed -ne \$p) |
| ' |
| |
| test_expect_success 'tabs and spaces are accepted in the todolist' ' |
| rebase_setup_and_clean indented-comment && |
| write_script add-indent.sh <<-\EOF && |
| ( |
| # Turn single spaces into space/tab mix |
| sed "1s/ / /g; 2s/ / /g; 3s/ / /g" "$1" |
| printf "\n\t# comment\n #more\n\t # comment\n" |
| ) >"$1.new" |
| mv "$1.new" "$1" |
| EOF |
| test_set_editor "$(pwd)/add-indent.sh" && |
| git rebase -i HEAD^^^ && |
| test E = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| test_expect_success 'static check of bad SHA-1' ' |
| rebase_setup_and_clean bad-sha && |
| set_fake_editor && |
| test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ |
| git rebase -i --root 2>actual && |
| test_i18ngrep "edit XXXXXXX False commit" actual && |
| test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && |
| FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && |
| git rebase --continue && |
| test E = $(git cat-file commit HEAD | sed -ne \$p) |
| ' |
| |
| test_expect_success 'editor saves as CR/LF' ' |
| git checkout -b with-crlf && |
| write_script add-crs.sh <<-\EOF && |
| sed -e "s/\$/Q/" <"$1" | tr Q "\\015" >"$1".new && |
| mv -f "$1".new "$1" |
| EOF |
| ( |
| test_set_editor "$(pwd)/add-crs.sh" && |
| git rebase -i HEAD^ |
| ) |
| ' |
| |
| SQ="'" |
| test_expect_success 'rebase -i --gpg-sign=<key-id>' ' |
| test_when_finished "test_might_fail git rebase --abort" && |
| set_fake_editor && |
| FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ |
| >out 2>err && |
| test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err |
| ' |
| |
| test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' |
| test_when_finished "test_might_fail git rebase --abort" && |
| test_config commit.gpgsign true && |
| set_fake_editor && |
| FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ |
| >out 2>err && |
| test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err |
| ' |
| |
| test_expect_success 'valid author header after --root swap' ' |
| rebase_setup_and_clean author-header no-conflict-branch && |
| set_fake_editor && |
| git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && |
| git cat-file commit HEAD | grep ^author >expected && |
| FAKE_LINES="5 1" git rebase -i --root && |
| git cat-file commit HEAD^ | grep ^author >actual && |
| test_cmp expected actual |
| ' |
| |
| test_expect_success 'valid author header when author contains single quote' ' |
| rebase_setup_and_clean author-header no-conflict-branch && |
| set_fake_editor && |
| git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && |
| git cat-file commit HEAD | grep ^author >expected && |
| FAKE_LINES="2" git rebase -i HEAD~2 && |
| git cat-file commit HEAD | grep ^author >actual && |
| test_cmp expected actual |
| ' |
| |
| test_done |