Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Amiga Linux/68k 8390 based PCMCIA Ethernet Driver for the Amiga 1200 |
| 3 | * |
| 4 | * (C) Copyright 1997 Alain Malek |
| 5 | * (Alain.Malek@cryogen.com) |
| 6 | * |
| 7 | * ---------------------------------------------------------------------------- |
| 8 | * |
| 9 | * This program is based on |
| 10 | * |
| 11 | * ne.c: A general non-shared-memory NS8390 ethernet driver for linux |
| 12 | * Written 1992-94 by Donald Becker. |
| 13 | * |
| 14 | * 8390.c: A general NS8390 ethernet driver core for linux. |
| 15 | * Written 1992-94 by Donald Becker. |
| 16 | * |
| 17 | * cnetdevice: A Sana-II ethernet driver for AmigaOS |
| 18 | * Written by Bruce Abbott (bhabbott@inhb.co.nz) |
| 19 | * |
| 20 | * ---------------------------------------------------------------------------- |
| 21 | * |
| 22 | * This file is subject to the terms and conditions of the GNU General Public |
| 23 | * License. See the file COPYING in the main directory of the Linux |
| 24 | * distribution for more details. |
| 25 | * |
| 26 | * ---------------------------------------------------------------------------- |
| 27 | * |
| 28 | */ |
| 29 | |
| 30 | |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/kernel.h> |
| 33 | #include <linux/errno.h> |
| 34 | #include <linux/pci.h> |
| 35 | #include <linux/init.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <linux/netdevice.h> |
| 38 | #include <linux/etherdevice.h> |
Geert Uytterhoeven | ac75227 | 2011-06-11 14:58:17 -0700 | [diff] [blame] | 39 | #include <linux/interrupt.h> |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 40 | #include <linux/jiffies.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 41 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 42 | #include <asm/io.h> |
| 43 | #include <asm/setup.h> |
| 44 | #include <asm/amigaints.h> |
| 45 | #include <asm/amigahw.h> |
| 46 | #include <asm/amigayle.h> |
| 47 | #include <asm/amipcmcia.h> |
| 48 | |
| 49 | #include "8390.h" |
| 50 | |
| 51 | /* ---- No user-serviceable parts below ---- */ |
| 52 | |
| 53 | #define DRV_NAME "apne" |
| 54 | |
| 55 | #define NE_BASE (dev->base_addr) |
| 56 | #define NE_CMD 0x00 |
| 57 | #define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */ |
| 58 | #define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */ |
| 59 | #define NE_IO_EXTENT 0x20 |
| 60 | |
| 61 | #define NE_EN0_ISR 0x07 |
| 62 | #define NE_EN0_DCFG 0x0e |
| 63 | |
| 64 | #define NE_EN0_RSARLO 0x08 |
| 65 | #define NE_EN0_RSARHI 0x09 |
| 66 | #define NE_EN0_RCNTLO 0x0a |
| 67 | #define NE_EN0_RXCR 0x0c |
| 68 | #define NE_EN0_TXCR 0x0d |
| 69 | #define NE_EN0_RCNTHI 0x0b |
| 70 | #define NE_EN0_IMR 0x0f |
| 71 | |
| 72 | #define NE1SM_START_PG 0x20 /* First page of TX buffer */ |
| 73 | #define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */ |
| 74 | #define NESM_START_PG 0x40 /* First page of TX buffer */ |
| 75 | #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ |
| 76 | |
| 77 | |
| 78 | struct net_device * __init apne_probe(int unit); |
| 79 | static int apne_probe1(struct net_device *dev, int ioaddr); |
| 80 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 81 | static void apne_reset_8390(struct net_device *dev); |
| 82 | static void apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, |
| 83 | int ring_page); |
| 84 | static void apne_block_input(struct net_device *dev, int count, |
| 85 | struct sk_buff *skb, int ring_offset); |
| 86 | static void apne_block_output(struct net_device *dev, const int count, |
| 87 | const unsigned char *buf, const int start_page); |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 88 | static irqreturn_t apne_interrupt(int irq, void *dev_id); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 89 | |
| 90 | static int init_pcmcia(void); |
| 91 | |
| 92 | /* IO base address used for nic */ |
| 93 | |
| 94 | #define IOBASE 0x300 |
| 95 | |
| 96 | /* |
| 97 | use MANUAL_CONFIG and MANUAL_OFFSET for enabling IO by hand |
| 98 | you can find the values to use by looking at the cnet.device |
| 99 | config file example (the default values are for the CNET40BC card) |
| 100 | */ |
| 101 | |
| 102 | /* |
| 103 | #define MANUAL_CONFIG 0x20 |
| 104 | #define MANUAL_OFFSET 0x3f8 |
| 105 | |
| 106 | #define MANUAL_HWADDR0 0x00 |
| 107 | #define MANUAL_HWADDR1 0x12 |
| 108 | #define MANUAL_HWADDR2 0x34 |
| 109 | #define MANUAL_HWADDR3 0x56 |
| 110 | #define MANUAL_HWADDR4 0x78 |
| 111 | #define MANUAL_HWADDR5 0x9a |
| 112 | */ |
| 113 | |
| 114 | static const char version[] = |
| 115 | "apne.c:v1.1 7/10/98 Alain Malek (Alain.Malek@cryogen.ch)\n"; |
| 116 | |
| 117 | static int apne_owned; /* signal if card already owned */ |
| 118 | |
| 119 | struct net_device * __init apne_probe(int unit) |
| 120 | { |
| 121 | struct net_device *dev; |
| 122 | #ifndef MANUAL_CONFIG |
| 123 | char tuple[8]; |
| 124 | #endif |
| 125 | int err; |
| 126 | |
Geert Uytterhoeven | 0f73448 | 2008-05-18 20:47:16 +0200 | [diff] [blame] | 127 | if (!MACH_IS_AMIGA) |
| 128 | return ERR_PTR(-ENODEV); |
| 129 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 130 | if (apne_owned) |
| 131 | return ERR_PTR(-ENODEV); |
| 132 | |
| 133 | if ( !(AMIGAHW_PRESENT(PCMCIA)) ) |
| 134 | return ERR_PTR(-ENODEV); |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 135 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 136 | printk("Looking for PCMCIA ethernet card : "); |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 137 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 138 | /* check if a card is inserted */ |
| 139 | if (!(PCMCIA_INSERTED)) { |
| 140 | printk("NO PCMCIA card inserted\n"); |
| 141 | return ERR_PTR(-ENODEV); |
| 142 | } |
| 143 | |
| 144 | dev = alloc_ei_netdev(); |
| 145 | if (!dev) |
| 146 | return ERR_PTR(-ENOMEM); |
| 147 | if (unit >= 0) { |
| 148 | sprintf(dev->name, "eth%d", unit); |
| 149 | netdev_boot_setup_check(dev); |
| 150 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 151 | |
| 152 | /* disable pcmcia irq for readtuple */ |
| 153 | pcmcia_disable_irq(); |
| 154 | |
| 155 | #ifndef MANUAL_CONFIG |
| 156 | if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) || |
| 157 | (tuple[2] != CISTPL_FUNCID_NETWORK)) { |
| 158 | printk("not an ethernet card\n"); |
| 159 | /* XXX: shouldn't we re-enable irq here? */ |
| 160 | free_netdev(dev); |
| 161 | return ERR_PTR(-ENODEV); |
| 162 | } |
| 163 | #endif |
| 164 | |
| 165 | printk("ethernet PCMCIA card inserted\n"); |
| 166 | |
| 167 | if (!init_pcmcia()) { |
| 168 | /* XXX: shouldn't we re-enable irq here? */ |
| 169 | free_netdev(dev); |
| 170 | return ERR_PTR(-ENODEV); |
| 171 | } |
| 172 | |
| 173 | if (!request_region(IOBASE, 0x20, DRV_NAME)) { |
| 174 | free_netdev(dev); |
| 175 | return ERR_PTR(-EBUSY); |
| 176 | } |
| 177 | |
| 178 | err = apne_probe1(dev, IOBASE); |
| 179 | if (err) { |
| 180 | release_region(IOBASE, 0x20); |
| 181 | free_netdev(dev); |
| 182 | return ERR_PTR(err); |
| 183 | } |
| 184 | err = register_netdev(dev); |
| 185 | if (!err) |
| 186 | return dev; |
| 187 | |
| 188 | pcmcia_disable_irq(); |
| 189 | free_irq(IRQ_AMIGA_PORTS, dev); |
| 190 | pcmcia_reset(); |
| 191 | release_region(IOBASE, 0x20); |
| 192 | free_netdev(dev); |
| 193 | return ERR_PTR(err); |
| 194 | } |
| 195 | |
| 196 | static int __init apne_probe1(struct net_device *dev, int ioaddr) |
| 197 | { |
| 198 | int i; |
| 199 | unsigned char SA_prom[32]; |
| 200 | int wordlength = 2; |
| 201 | const char *name = NULL; |
| 202 | int start_page, stop_page; |
| 203 | #ifndef MANUAL_HWADDR0 |
| 204 | int neX000, ctron; |
| 205 | #endif |
| 206 | static unsigned version_printed; |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 207 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 208 | if (ei_debug && version_printed++ == 0) |
| 209 | printk(version); |
| 210 | |
| 211 | printk("PCMCIA NE*000 ethercard probe"); |
| 212 | |
| 213 | /* Reset card. Who knows what dain-bramaged state it was left in. */ |
| 214 | { unsigned long reset_start_time = jiffies; |
| 215 | |
| 216 | outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET); |
| 217 | |
| 218 | while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 219 | if (time_after(jiffies, reset_start_time + 2*HZ/100)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 220 | printk(" not found (no reset ack).\n"); |
| 221 | return -ENODEV; |
| 222 | } |
| 223 | |
| 224 | outb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */ |
| 225 | } |
| 226 | |
| 227 | #ifndef MANUAL_HWADDR0 |
| 228 | |
| 229 | /* Read the 16 bytes of station address PROM. |
| 230 | We must first initialize registers, similar to NS8390_init(eifdev, 0). |
| 231 | We can't reliably read the SAPROM address without this. |
| 232 | (I learned the hard way!). */ |
| 233 | { |
| 234 | struct {unsigned long value, offset; } program_seq[] = { |
| 235 | {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/ |
| 236 | {0x48, NE_EN0_DCFG}, /* Set byte-wide (0x48) access. */ |
| 237 | {0x00, NE_EN0_RCNTLO}, /* Clear the count regs. */ |
| 238 | {0x00, NE_EN0_RCNTHI}, |
| 239 | {0x00, NE_EN0_IMR}, /* Mask completion irq. */ |
| 240 | {0xFF, NE_EN0_ISR}, |
| 241 | {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */ |
| 242 | {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode. */ |
| 243 | {32, NE_EN0_RCNTLO}, |
| 244 | {0x00, NE_EN0_RCNTHI}, |
| 245 | {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000. */ |
| 246 | {0x00, NE_EN0_RSARHI}, |
| 247 | {E8390_RREAD+E8390_START, NE_CMD}, |
| 248 | }; |
Denis Cheng | ff8ac60 | 2007-09-02 18:30:18 +0800 | [diff] [blame] | 249 | for (i = 0; i < ARRAY_SIZE(program_seq); i++) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 250 | outb(program_seq[i].value, ioaddr + program_seq[i].offset); |
| 251 | } |
| 252 | |
| 253 | } |
| 254 | for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) { |
| 255 | SA_prom[i] = inb(ioaddr + NE_DATAPORT); |
| 256 | SA_prom[i+1] = inb(ioaddr + NE_DATAPORT); |
| 257 | if (SA_prom[i] != SA_prom[i+1]) |
| 258 | wordlength = 1; |
| 259 | } |
| 260 | |
| 261 | /* At this point, wordlength *only* tells us if the SA_prom is doubled |
| 262 | up or not because some broken PCI cards don't respect the byte-wide |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 263 | request in program_seq above, and hence don't have doubled up values. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 264 | These broken cards would otherwise be detected as an ne1000. */ |
| 265 | |
| 266 | if (wordlength == 2) |
| 267 | for (i = 0; i < 16; i++) |
| 268 | SA_prom[i] = SA_prom[i+i]; |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 269 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 270 | if (wordlength == 2) { |
| 271 | /* We must set the 8390 for word mode. */ |
| 272 | outb(0x49, ioaddr + NE_EN0_DCFG); |
| 273 | start_page = NESM_START_PG; |
| 274 | stop_page = NESM_STOP_PG; |
| 275 | } else { |
| 276 | start_page = NE1SM_START_PG; |
| 277 | stop_page = NE1SM_STOP_PG; |
| 278 | } |
| 279 | |
| 280 | neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57); |
| 281 | ctron = (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d); |
| 282 | |
| 283 | /* Set up the rest of the parameters. */ |
| 284 | if (neX000) { |
| 285 | name = (wordlength == 2) ? "NE2000" : "NE1000"; |
| 286 | } else if (ctron) { |
| 287 | name = (wordlength == 2) ? "Ctron-8" : "Ctron-16"; |
| 288 | start_page = 0x01; |
| 289 | stop_page = (wordlength == 2) ? 0x40 : 0x20; |
| 290 | } else { |
| 291 | printk(" not found.\n"); |
| 292 | return -ENXIO; |
| 293 | |
| 294 | } |
| 295 | |
| 296 | #else |
| 297 | wordlength = 2; |
| 298 | /* We must set the 8390 for word mode. */ |
| 299 | outb(0x49, ioaddr + NE_EN0_DCFG); |
| 300 | start_page = NESM_START_PG; |
| 301 | stop_page = NESM_STOP_PG; |
| 302 | |
| 303 | SA_prom[0] = MANUAL_HWADDR0; |
| 304 | SA_prom[1] = MANUAL_HWADDR1; |
| 305 | SA_prom[2] = MANUAL_HWADDR2; |
| 306 | SA_prom[3] = MANUAL_HWADDR3; |
| 307 | SA_prom[4] = MANUAL_HWADDR4; |
| 308 | SA_prom[5] = MANUAL_HWADDR5; |
| 309 | name = "NE2000"; |
| 310 | #endif |
| 311 | |
| 312 | dev->base_addr = ioaddr; |
Kars de Jong | d8a53b3 | 2006-12-09 10:51:03 +0100 | [diff] [blame] | 313 | dev->irq = IRQ_AMIGA_PORTS; |
Stephen Hemminger | 7d359da | 2008-11-25 18:25:32 -0800 | [diff] [blame] | 314 | dev->netdev_ops = &ei_netdev_ops; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 315 | |
| 316 | /* Install the Interrupt handler */ |
Kars de Jong | d8a53b3 | 2006-12-09 10:51:03 +0100 | [diff] [blame] | 317 | i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 318 | if (i) return i; |
| 319 | |
Joe Perches | 104bf3f | 2011-11-16 09:38:03 +0000 | [diff] [blame] | 320 | for (i = 0; i < ETH_ALEN; i++) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 321 | dev->dev_addr[i] = SA_prom[i]; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 322 | |
Johannes Berg | e174961 | 2008-10-27 15:59:26 -0700 | [diff] [blame] | 323 | printk(" %pM\n", dev->dev_addr); |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 324 | |
| 325 | printk("%s: %s found.\n", dev->name, name); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 326 | |
| 327 | ei_status.name = name; |
| 328 | ei_status.tx_start_page = start_page; |
| 329 | ei_status.stop_page = stop_page; |
| 330 | ei_status.word16 = (wordlength == 2); |
| 331 | |
| 332 | ei_status.rx_start_page = start_page + TX_PAGES; |
| 333 | |
| 334 | ei_status.reset_8390 = &apne_reset_8390; |
| 335 | ei_status.block_input = &apne_block_input; |
| 336 | ei_status.block_output = &apne_block_output; |
| 337 | ei_status.get_8390_hdr = &apne_get_8390_hdr; |
Stephen Hemminger | 7d359da | 2008-11-25 18:25:32 -0800 | [diff] [blame] | 338 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 339 | NS8390_init(dev, 0); |
| 340 | |
| 341 | pcmcia_ack_int(pcmcia_get_intreq()); /* ack PCMCIA int req */ |
| 342 | pcmcia_enable_irq(); |
| 343 | |
| 344 | apne_owned = 1; |
| 345 | |
| 346 | return 0; |
| 347 | } |
| 348 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 349 | /* Hard reset the card. This used to pause for the same period that a |
| 350 | 8390 reset command required, but that shouldn't be necessary. */ |
| 351 | static void |
| 352 | apne_reset_8390(struct net_device *dev) |
| 353 | { |
| 354 | unsigned long reset_start_time = jiffies; |
| 355 | |
| 356 | init_pcmcia(); |
| 357 | |
| 358 | if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); |
| 359 | |
| 360 | outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); |
| 361 | |
| 362 | ei_status.txing = 0; |
| 363 | ei_status.dmaing = 0; |
| 364 | |
| 365 | /* This check _should_not_ be necessary, omit eventually. */ |
| 366 | while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0) |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 367 | if (time_after(jiffies, reset_start_time + 2*HZ/100)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 368 | printk("%s: ne_reset_8390() did not complete.\n", dev->name); |
| 369 | break; |
| 370 | } |
| 371 | outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */ |
| 372 | } |
| 373 | |
| 374 | /* Grab the 8390 specific header. Similar to the block_input routine, but |
| 375 | we don't need to be concerned with ring wrap as the header will be at |
| 376 | the start of a page, so we optimize accordingly. */ |
| 377 | |
| 378 | static void |
| 379 | apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) |
| 380 | { |
| 381 | |
| 382 | int nic_base = dev->base_addr; |
| 383 | int cnt; |
| 384 | char *ptrc; |
| 385 | short *ptrs; |
| 386 | |
| 387 | /* This *shouldn't* happen. If it does, it's the last thing you'll see */ |
| 388 | if (ei_status.dmaing) { |
| 389 | printk("%s: DMAing conflict in ne_get_8390_hdr " |
| 390 | "[DMAstat:%d][irqlock:%d][intr:%d].\n", |
| 391 | dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); |
| 392 | return; |
| 393 | } |
| 394 | |
| 395 | ei_status.dmaing |= 0x01; |
| 396 | outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); |
| 397 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); |
| 398 | outb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO); |
| 399 | outb(0, nic_base + NE_EN0_RCNTHI); |
| 400 | outb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */ |
| 401 | outb(ring_page, nic_base + NE_EN0_RSARHI); |
| 402 | outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); |
| 403 | |
| 404 | if (ei_status.word16) { |
| 405 | ptrs = (short*)hdr; |
| 406 | for(cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++) |
| 407 | *ptrs++ = inw(NE_BASE + NE_DATAPORT); |
| 408 | } else { |
| 409 | ptrc = (char*)hdr; |
| 410 | for(cnt = 0; cnt < sizeof(struct e8390_pkt_hdr); cnt++) |
| 411 | *ptrc++ = inb(NE_BASE + NE_DATAPORT); |
| 412 | } |
| 413 | |
| 414 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */ |
| 415 | ei_status.dmaing &= ~0x01; |
| 416 | |
| 417 | le16_to_cpus(&hdr->count); |
| 418 | } |
| 419 | |
| 420 | /* Block input and output, similar to the Crynwr packet driver. If you |
| 421 | are porting to a new ethercard, look at the packet driver source for hints. |
| 422 | The NEx000 doesn't share the on-board packet memory -- you have to put |
| 423 | the packet out through the "remote DMA" dataport using outb. */ |
| 424 | |
| 425 | static void |
| 426 | apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) |
| 427 | { |
| 428 | int nic_base = dev->base_addr; |
| 429 | char *buf = skb->data; |
| 430 | char *ptrc; |
| 431 | short *ptrs; |
| 432 | int cnt; |
| 433 | |
| 434 | /* This *shouldn't* happen. If it does, it's the last thing you'll see */ |
| 435 | if (ei_status.dmaing) { |
| 436 | printk("%s: DMAing conflict in ne_block_input " |
| 437 | "[DMAstat:%d][irqlock:%d][intr:%d].\n", |
| 438 | dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); |
| 439 | return; |
| 440 | } |
| 441 | ei_status.dmaing |= 0x01; |
| 442 | outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); |
| 443 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); |
| 444 | outb(count & 0xff, nic_base + NE_EN0_RCNTLO); |
| 445 | outb(count >> 8, nic_base + NE_EN0_RCNTHI); |
| 446 | outb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO); |
| 447 | outb(ring_offset >> 8, nic_base + NE_EN0_RSARHI); |
| 448 | outb(E8390_RREAD+E8390_START, nic_base + NE_CMD); |
| 449 | if (ei_status.word16) { |
| 450 | ptrs = (short*)buf; |
| 451 | for (cnt = 0; cnt < (count>>1); cnt++) |
| 452 | *ptrs++ = inw(NE_BASE + NE_DATAPORT); |
| 453 | if (count & 0x01) { |
| 454 | buf[count-1] = inb(NE_BASE + NE_DATAPORT); |
| 455 | } |
| 456 | } else { |
Joe Perches | 6469933 | 2012-06-04 12:44:16 +0000 | [diff] [blame] | 457 | ptrc = buf; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 458 | for (cnt = 0; cnt < count; cnt++) |
| 459 | *ptrc++ = inb(NE_BASE + NE_DATAPORT); |
| 460 | } |
| 461 | |
| 462 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */ |
| 463 | ei_status.dmaing &= ~0x01; |
| 464 | } |
| 465 | |
| 466 | static void |
| 467 | apne_block_output(struct net_device *dev, int count, |
| 468 | const unsigned char *buf, const int start_page) |
| 469 | { |
| 470 | int nic_base = NE_BASE; |
| 471 | unsigned long dma_start; |
| 472 | char *ptrc; |
| 473 | short *ptrs; |
| 474 | int cnt; |
| 475 | |
| 476 | /* Round the count up for word writes. Do we need to do this? |
| 477 | What effect will an odd byte count have on the 8390? |
| 478 | I should check someday. */ |
| 479 | if (ei_status.word16 && (count & 0x01)) |
| 480 | count++; |
| 481 | |
| 482 | /* This *shouldn't* happen. If it does, it's the last thing you'll see */ |
| 483 | if (ei_status.dmaing) { |
| 484 | printk("%s: DMAing conflict in ne_block_output." |
| 485 | "[DMAstat:%d][irqlock:%d][intr:%d]\n", |
| 486 | dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); |
| 487 | return; |
| 488 | } |
| 489 | ei_status.dmaing |= 0x01; |
| 490 | /* We should already be in page 0, but to be safe... */ |
| 491 | outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); |
| 492 | |
| 493 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); |
| 494 | |
| 495 | /* Now the normal output. */ |
| 496 | outb(count & 0xff, nic_base + NE_EN0_RCNTLO); |
| 497 | outb(count >> 8, nic_base + NE_EN0_RCNTHI); |
| 498 | outb(0x00, nic_base + NE_EN0_RSARLO); |
| 499 | outb(start_page, nic_base + NE_EN0_RSARHI); |
| 500 | |
| 501 | outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD); |
| 502 | if (ei_status.word16) { |
| 503 | ptrs = (short*)buf; |
| 504 | for (cnt = 0; cnt < count>>1; cnt++) |
| 505 | outw(*ptrs++, NE_BASE+NE_DATAPORT); |
| 506 | } else { |
| 507 | ptrc = (char*)buf; |
| 508 | for (cnt = 0; cnt < count; cnt++) |
| 509 | outb(*ptrc++, NE_BASE + NE_DATAPORT); |
| 510 | } |
| 511 | |
| 512 | dma_start = jiffies; |
| 513 | |
| 514 | while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) |
Marcelo Feitoza Parisi | ff5688a | 2006-01-09 18:37:15 -0800 | [diff] [blame] | 515 | if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 516 | printk("%s: timeout waiting for Tx RDC.\n", dev->name); |
| 517 | apne_reset_8390(dev); |
| 518 | NS8390_init(dev,1); |
| 519 | break; |
| 520 | } |
| 521 | |
| 522 | outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */ |
| 523 | ei_status.dmaing &= ~0x01; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 524 | } |
| 525 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 526 | static irqreturn_t apne_interrupt(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 527 | { |
| 528 | unsigned char pcmcia_intreq; |
| 529 | |
| 530 | if (!(gayle.inten & GAYLE_IRQ_IRQ)) |
| 531 | return IRQ_NONE; |
| 532 | |
| 533 | pcmcia_intreq = pcmcia_get_intreq(); |
| 534 | |
| 535 | if (!(pcmcia_intreq & GAYLE_IRQ_IRQ)) { |
| 536 | pcmcia_ack_int(pcmcia_intreq); |
| 537 | return IRQ_NONE; |
| 538 | } |
| 539 | if (ei_debug > 3) |
| 540 | printk("pcmcia intreq = %x\n", pcmcia_intreq); |
| 541 | pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */ |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 542 | ei_interrupt(irq, dev_id); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 543 | pcmcia_ack_int(pcmcia_get_intreq()); |
| 544 | pcmcia_enable_irq(); |
| 545 | return IRQ_HANDLED; |
| 546 | } |
| 547 | |
| 548 | #ifdef MODULE |
| 549 | static struct net_device *apne_dev; |
| 550 | |
Jon Schindler | 3cfbb67 | 2008-03-05 18:50:16 -0800 | [diff] [blame] | 551 | static int __init apne_module_init(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 552 | { |
| 553 | apne_dev = apne_probe(-1); |
| 554 | if (IS_ERR(apne_dev)) |
| 555 | return PTR_ERR(apne_dev); |
| 556 | return 0; |
| 557 | } |
| 558 | |
Jon Schindler | 3cfbb67 | 2008-03-05 18:50:16 -0800 | [diff] [blame] | 559 | static void __exit apne_module_exit(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 560 | { |
| 561 | unregister_netdev(apne_dev); |
| 562 | |
| 563 | pcmcia_disable_irq(); |
| 564 | |
| 565 | free_irq(IRQ_AMIGA_PORTS, apne_dev); |
| 566 | |
| 567 | pcmcia_reset(); |
| 568 | |
| 569 | release_region(IOBASE, 0x20); |
| 570 | |
| 571 | free_netdev(apne_dev); |
| 572 | } |
Jon Schindler | 3cfbb67 | 2008-03-05 18:50:16 -0800 | [diff] [blame] | 573 | module_init(apne_module_init); |
| 574 | module_exit(apne_module_exit); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 575 | #endif |
| 576 | |
| 577 | static int init_pcmcia(void) |
| 578 | { |
| 579 | u_char config; |
| 580 | #ifndef MANUAL_CONFIG |
| 581 | u_char tuple[32]; |
| 582 | int offset_len; |
| 583 | #endif |
| 584 | u_long offset; |
| 585 | |
| 586 | pcmcia_reset(); |
| 587 | pcmcia_program_voltage(PCMCIA_0V); |
| 588 | pcmcia_access_speed(PCMCIA_SPEED_250NS); |
| 589 | pcmcia_write_enable(); |
| 590 | |
| 591 | #ifdef MANUAL_CONFIG |
| 592 | config = MANUAL_CONFIG; |
| 593 | #else |
| 594 | /* get and write config byte to enable IO port */ |
| 595 | |
| 596 | if (pcmcia_copy_tuple(CISTPL_CFTABLE_ENTRY, tuple, 32) < 3) |
| 597 | return 0; |
| 598 | |
| 599 | config = tuple[2] & 0x3f; |
| 600 | #endif |
| 601 | #ifdef MANUAL_OFFSET |
| 602 | offset = MANUAL_OFFSET; |
| 603 | #else |
| 604 | if (pcmcia_copy_tuple(CISTPL_CONFIG, tuple, 32) < 6) |
| 605 | return 0; |
| 606 | |
| 607 | offset_len = (tuple[2] & 0x3) + 1; |
| 608 | offset = 0; |
| 609 | while(offset_len--) { |
| 610 | offset = (offset << 8) | tuple[4+offset_len]; |
| 611 | } |
| 612 | #endif |
| 613 | |
| 614 | out_8(GAYLE_ATTRIBUTE+offset, config); |
| 615 | |
| 616 | return 1; |
| 617 | } |
| 618 | |
| 619 | MODULE_LICENSE("GPL"); |