blob: 299994c3aa74a01b7d9de6ef60fda37f6d1e0af5 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Multimedia Video device configuration
3#
4
Jan Engelhardtc5da5af2007-05-02 10:06:23 -03005menuconfig RADIO_ADAPTERS
6 bool "Radio Adapters"
Mauro Carvalho Chehab057596e2008-02-02 11:25:31 -03007 depends on VIDEO_V4L2
Jan Engelhardtc5da5af2007-05-02 10:06:23 -03008 default y
Mauro Carvalho Chehabff016522007-05-02 15:14:06 -03009 ---help---
10 Say Y here to enable selecting AM/FM radio adapters.
Jan Engelhardtc5da5af2007-05-02 10:06:23 -030011
Mauro Carvalho Chehab057596e2008-02-02 11:25:31 -030012if RADIO_ADAPTERS && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070013
14config RADIO_CADET
15 tristate "ADS Cadet AM/FM Tuner"
Hans J. Kochc0c7fa02006-08-08 09:10:12 -030016 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 ---help---
18 Choose Y here if you have one of these AM/FM radio cards, and then
19 fill in the port address below.
20
21 In order to control your radio card, you will need to use programs
22 that are compatible with the Video For Linux API. Information on
23 this API and pointers to "v4l" programs may be found at
24 <file:Documentation/video4linux/API.html>.
25
26 Further documentation on this driver can be found on the WWW at
27 <http://linux.blackhawke.net/cadet/>.
28
29 To compile this driver as a module, choose M here: the
30 module will be called radio-cadet.
31
32config RADIO_RTRACK
33 tristate "AIMSlab RadioTrack (aka RadioReveal) support"
Mauro Carvalho Chehab46ff2c72006-08-08 09:10:01 -030034 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070035 ---help---
36 Choose Y here if you have one of these FM radio cards, and then fill
37 in the port address below.
38
39 Note that newer AIMSlab RadioTrack cards have a different chipset
40 and are not supported by this driver. For these cards, use the
41 RadioTrack II driver below.
42
43 If you have a GemTeks combined (PnP) sound- and radio card you must
44 use this driver as a module and setup the card with isapnptools.
45 You must also pass the module a suitable io parameter, 0x248 has
46 been reported to be used by these cards.
47
48 In order to control your radio card, you will need to use programs
49 that are compatible with the Video For Linux API. Information on
50 this API and pointers to "v4l" programs may be found at
51 <file:Documentation/video4linux/API.html>. More information is
52 contained in the file
53 <file:Documentation/video4linux/radiotrack.txt>.
54
55 To compile this driver as a module, choose M here: the
56 module will be called radio-aimslab.
57
58config RADIO_RTRACK_PORT
59 hex "RadioTrack i/o port (0x20f or 0x30f)"
60 depends on RADIO_RTRACK=y
61 default "20f"
62 help
63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
64 haven't changed the jumper setting on the card.
65
66config RADIO_RTRACK2
67 tristate "AIMSlab RadioTrack II support"
Mauro Carvalho Chehabf8c559f2006-08-08 09:10:02 -030068 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 ---help---
70 Choose Y here if you have this FM radio card, and then fill in the
71 port address below.
72
73 In order to control your radio card, you will need to use programs
74 that are compatible with the Video For Linux API. Information on
75 this API and pointers to "v4l" programs may be found at
76 <file:Documentation/video4linux/API.html>.
77
78 To compile this driver as a module, choose M here: the
79 module will be called radio-rtrack2.
80
81config RADIO_RTRACK2_PORT
82 hex "RadioTrack II i/o port (0x20c or 0x30c)"
83 depends on RADIO_RTRACK2=y
84 default "30c"
85 help
86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
87 haven't changed the jumper setting on the card.
88
89config RADIO_AZTECH
90 tristate "Aztech/Packard Bell Radio"
Mauro Carvalho Chehaba4366af2006-08-08 09:10:01 -030091 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070092 ---help---
93 Choose Y here if you have one of these FM radio cards, and then fill
94 in the port address below.
95
96 In order to control your radio card, you will need to use programs
97 that are compatible with the Video For Linux API. Information on
98 this API and pointers to "v4l" programs may be found at
99 <file:Documentation/video4linux/API.html>.
100
101 To compile this driver as a module, choose M here: the
102 module will be called radio-aztech.
103
104config RADIO_AZTECH_PORT
105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
106 depends on RADIO_AZTECH=y
107 default "350"
108 help
109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you
110 haven't changed the setting of jumper JP3 on the card. Removing the
111 jumper sets the card to 0x358.
112
113config RADIO_GEMTEK
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300114 tristate "GemTek Radio card (or compatible) support"
Mauro Carvalho Chehabd1c4ecd2006-08-08 09:10:01 -0300115 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116 ---help---
117 Choose Y here if you have this FM radio card, and then fill in the
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300118 I/O port address and settings below. The following cards either have
119 GemTek Radio tuner or are rebranded GemTek Radio cards:
120
121 - Sound Vision 16 Gold with FM Radio
122 - Typhoon Radio card (some models)
123 - Hama Radio card
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124
125 In order to control your radio card, you will need to use programs
126 that are compatible with the Video For Linux API. Information on
127 this API and pointers to "v4l" programs may be found at
128 <file:Documentation/video4linux/API.html>.
129
130 To compile this driver as a module, choose M here: the
131 module will be called radio-gemtek.
132
133config RADIO_GEMTEK_PORT
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300134 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 depends on RADIO_GEMTEK=y
136 default "34c"
137 help
138 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
139 0x34c, if you haven't changed the jumper setting on the card. On
140 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300141 port is 0x20c, 0x248 or 0x28c.
142 If automatic I/O port probing is enabled this port will be used only
143 in case of automatic probing failure, ie. as a fallback.
144
145config RADIO_GEMTEK_PROBE
146 bool "Automatic I/O port probing"
147 depends on RADIO_GEMTEK=y
148 default y
149 help
150 Say Y here to enable automatic probing for GemTek Radio card. The
151 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
152 0x28c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154config RADIO_MAXIRADIO
155 tristate "Guillemot MAXI Radio FM 2000 radio"
Mauro Carvalho Chehabe84fef62006-08-08 09:10:05 -0300156 depends on VIDEO_V4L2 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 ---help---
158 Choose Y here if you have this radio card. This card may also be
159 found as Gemtek PCI FM.
160
161 In order to control your radio card, you will need to use programs
162 that are compatible with the Video For Linux API. Information on
163 this API and pointers to "v4l" programs may be found at
164 <file:Documentation/video4linux/API.html>.
165
166 To compile this driver as a module, choose M here: the
167 module will be called radio-maxiradio.
168
169config RADIO_MAESTRO
170 tristate "Maestro on board radio"
Mauro Carvalho Chehabb6055d72006-08-08 09:10:02 -0300171 depends on VIDEO_V4L2 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172 ---help---
173 Say Y here to directly support the on-board radio tuner on the
174 Maestro 2 or 2E sound card.
175
176 In order to control your radio card, you will need to use programs
177 that are compatible with the Video For Linux API. Information on
178 this API and pointers to "v4l" programs may be found at
179 <file:Documentation/video4linux/API.html>.
180
181 To compile this driver as a module, choose M here: the
182 module will be called radio-maestro.
183
Krzysztof Helt8366fc32009-11-27 11:24:13 +0100184config RADIO_MIROPCM20
185 tristate "miroSOUND PCM20 radio"
Randy Dunlapdd7cdb82009-12-08 09:13:07 -0800186 depends on ISA && VIDEO_V4L2 && SND
187 select SND_ISA
Krzysztof Helt8366fc32009-11-27 11:24:13 +0100188 select SND_MIRO
189 ---help---
190 Choose Y here if you have this FM radio card. You also need to enable
191 the ALSA sound system. This choice automatically selects the ALSA
192 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
193 is required for the radio-miropcm20.
194
195 In order to control your radio card, you will need to use programs
196 that are compatible with the Video For Linux API. Information on
197 this API and pointers to "v4l" programs may be found at
198 <file:Documentation/video4linux/API.html>.
199
200 To compile this driver as a module, choose M here: the
201 module will be called radio-miropcm20.
202
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203config RADIO_SF16FMI
Ondrej Zary4b830372009-12-10 17:06:44 -0300204 tristate "SF16-FMI/SF16-FMP Radio"
Mauro Carvalho Chehaba2ef73a2006-08-08 09:10:02 -0300205 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206 ---help---
Ondrej Zary67cabf52009-12-10 17:12:32 -0300207 Choose Y here if you have one of these FM radio cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208
209 In order to control your radio card, you will need to use programs
210 that are compatible with the Video For Linux API. Information on
211 this API and pointers to "v4l" programs may be found at
212 <file:Documentation/video4linux/API.html>.
213
214 To compile this driver as a module, choose M here: the
215 module will be called radio-sf16fmi.
216
217config RADIO_SF16FMR2
218 tristate "SF16FMR2 Radio"
Mauro Carvalho Chehabacda0e72006-08-08 09:10:02 -0300219 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220 ---help---
221 Choose Y here if you have one of these FM radio cards.
222
223 In order to control your radio card, you will need to use programs
224 that are compatible with the Video For Linux API. Information on
225 this API and pointers to "v4l" programs may be found on the WWW at
226 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
227
228 To compile this driver as a module, choose M here: the
229 module will be called radio-sf16fmr2.
230
231config RADIO_TERRATEC
232 tristate "TerraTec ActiveRadio ISA Standalone"
Mauro Carvalho Chehab55ac7b62006-08-08 09:10:03 -0300233 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234 ---help---
235 Choose Y here if you have this FM radio card, and then fill in the
236 port address below. (TODO)
237
238 Note: This driver is in its early stages. Right now volume and
239 frequency control and muting works at least for me, but
240 unfortunately I have not found anybody who wants to use this card
241 with Linux. So if it is this what YOU are trying to do right now,
242 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
243
244 In order to control your radio card, you will need to use programs
245 that are compatible with the Video For Linux API. Information on
246 this API and pointers to "v4l" programs may be found at
247 <file:Documentation/video4linux/API.html>.
248
249 To compile this driver as a module, choose M here: the
250 module will be called radio-terratec.
251
252config RADIO_TERRATEC_PORT
253 hex "Terratec i/o port (normally 0x590)"
254 depends on RADIO_TERRATEC=y
255 default "590"
256 help
257 Fill in the I/O port of your TerraTec FM radio card. If unsure, go
258 with the default.
259
260config RADIO_TRUST
261 tristate "Trust FM radio card"
Mauro Carvalho Chehab982eddb2006-08-08 09:10:05 -0300262 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700263 help
264 This is a driver for the Trust FM radio cards. Say Y if you have
265 such a card and want to use it under Linux.
266
267 To compile this driver as a module, choose M here: the
268 module will be called radio-trust.
269
270config RADIO_TRUST_PORT
271 hex "Trust i/o port (usually 0x350 or 0x358)"
272 depends on RADIO_TRUST=y
273 default "350"
274 help
275 Enter the I/O port of your Trust FM radio card. If unsure, try the
276 values "0x350" or "0x358".
277
278config RADIO_TYPHOON
279 tristate "Typhoon Radio (a.k.a. EcoRadio)"
Mauro Carvalho Chehab30c48302006-08-08 09:10:04 -0300280 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281 ---help---
282 Choose Y here if you have one of these FM radio cards, and then fill
283 in the port address and the frequency used for muting below.
284
285 In order to control your radio card, you will need to use programs
286 that are compatible with the Video For Linux API. Information on
287 this API and pointers to "v4l" programs may be found at
288 <file:Documentation/video4linux/API.html>.
289
290 To compile this driver as a module, choose M here: the
291 module will be called radio-typhoon.
292
Linus Torvalds1da177e2005-04-16 15:20:36 -0700293config RADIO_TYPHOON_PORT
294 hex "Typhoon I/O port (0x316 or 0x336)"
295 depends on RADIO_TYPHOON=y
296 default "316"
297 help
298 Enter the I/O port of your Typhoon or EcoRadio radio card.
299
300config RADIO_TYPHOON_MUTEFREQ
301 int "Typhoon frequency set when muting the device (kHz)"
302 depends on RADIO_TYPHOON=y
303 default "87500"
304 help
305 Enter the frequency used for muting the radio. The device is never
306 completely silent. If the volume is just turned down, you can still
307 hear silent voices and music. For that reason, the frequency of the
308 radio device is set to the frequency you can enter here whenever
309 the device is muted. There should be no local radio station at that
310 frequency.
311
312config RADIO_ZOLTRIX
313 tristate "Zoltrix Radio"
Mauro Carvalho Chehab2ab65292006-08-08 09:10:04 -0300314 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315 ---help---
316 Choose Y here if you have one of these FM radio cards, and then fill
317 in the port address below.
318
319 In order to control your radio card, you will need to use programs
320 that are compatible with the Video For Linux API. Information on
321 this API and pointers to "v4l" programs may be found at
322 <file:Documentation/video4linux/API.html>.
323
324 To compile this driver as a module, choose M here: the
325 module will be called radio-zoltrix.
326
327config RADIO_ZOLTRIX_PORT
328 hex "ZOLTRIX I/O port (0x20c or 0x30c)"
329 depends on RADIO_ZOLTRIX=y
330 default "20c"
331 help
332 Enter the I/O port of your Zoltrix radio card.
333
Hans Verkuil9c9dbed2009-08-08 09:00:37 -0300334config I2C_SI4713
335 tristate "I2C driver for Silicon Labs Si4713 device"
336 depends on I2C && VIDEO_V4L2
337 ---help---
338 Say Y here if you want support to Si4713 I2C device.
339 This device driver supports only i2c bus.
340
341 To compile this driver as a module, choose M here: the
342 module will be called si4713.
343
344config RADIO_SI4713
345 tristate "Silicon Labs Si4713 FM Radio Transmitter support"
346 depends on I2C && VIDEO_V4L2
347 select I2C_SI4713
348 ---help---
349 Say Y here if you want support to Si4713 FM Radio Transmitter.
350 This device can transmit audio through FM. It can transmit
Matti J. Aaltonen7a254f42009-09-17 23:46:18 -0300351 RDS and RBDS signals as well. This module is the v4l2 radio
Hans Verkuil9c9dbed2009-08-08 09:00:37 -0300352 interface for the i2c driver of this device.
353
354 To compile this driver as a module, choose M here: the
355 module will be called radio-si4713.
356
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300357config USB_DSBR
Douglas Schilling Landgrafb31c33bd2007-07-02 23:16:17 -0300358 tristate "D-Link/GemTek USB FM radio support"
359 depends on USB && VIDEO_V4L2
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300360 ---help---
361 Say Y here if you want to connect this type of radio to your
362 computer's USB port. Note that the audio is not digital, and
363 you must connect the line out connector to a sound card or a
364 set of speakers.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300366 To compile this driver as a module, choose M here: the
367 module will be called dsbr100.
Jan Engelhardtc5da5af2007-05-02 10:06:23 -0300368
Joonyoung Shimb09cd162009-08-09 14:22:20 -0300369config RADIO_SI470X
370 bool "Silicon Labs Si470x FM Radio Receiver support"
371 depends on VIDEO_V4L2
Tobias Lorenz6aadf822008-10-28 08:48:27 -0300372
Joonyoung Shimb09cd162009-08-09 14:22:20 -0300373source "drivers/media/radio/si470x/Kconfig"
Tobias Lorenz78656ac2008-01-14 21:55:27 -0300374
Alexey Klimov2aa72f32008-10-01 09:40:59 -0300375config USB_MR800
376 tristate "AverMedia MR 800 USB FM radio support"
377 depends on USB && VIDEO_V4L2
378 ---help---
379 Say Y here if you want to connect this type of radio to your
380 computer's USB port. Note that the audio is not digital, and
381 you must connect the line out connector to a sound card or a
382 set of speakers.
383
384 To compile this driver as a module, choose M here: the
385 module will be called radio-mr800.
386
Fabio Belavenuto46a60cf2008-12-30 19:27:09 -0300387config RADIO_TEA5764
388 tristate "TEA5764 I2C FM radio support"
389 depends on I2C && VIDEO_V4L2
390 ---help---
391 Say Y here if you want to use the TEA5764 FM chip found in
392 EZX phones. This FM chip is present in EZX phones from Motorola,
393 connected to internal pxa I2C bus.
394
395 To compile this driver as a module, choose M here: the
396 module will be called radio-tea5764.
397
398config RADIO_TEA5764_XTAL
399 bool "TEA5764 crystal reference"
400 depends on RADIO_TEA5764=y
401 default y
402 help
403 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
404 here if TEA5764 reference frequency is connected in FREQIN.
405
Richard Röjforsee4b9db2010-02-02 19:40:49 -0300406config RADIO_SAA7706H
407 tristate "SAA7706H Car Radio DSP"
408 depends on I2C && VIDEO_V4L2
409 ---help---
410 Say Y here if you want to use the SAA7706H Car radio Digital
411 Signal Processor, found for instance on the Russellville development
412 board. On the russellville the device is connected to internal
413 timberdale I2C bus.
414
415 To compile this driver as a module, choose M here: the
416 module will be called SAA7706H.
417
Richard Röjforseea85b02009-09-22 10:14:39 -0300418config RADIO_TEF6862
419 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
420 depends on I2C && VIDEO_V4L2
421 ---help---
422 Say Y here if you want to use the TEF6862 Car Radio Enhanced
423 Selectivity Tuner, found for instance on the Russellville development
424 board. On the russellville the device is connected to internal
425 timberdale I2C bus.
426
427 To compile this driver as a module, choose M here: the
428 module will be called TEF6862.
429
Richard Röjforsd44d1f32010-02-03 12:59:39 -0300430config RADIO_TIMBERDALE
431 tristate "Enable the Timberdale radio driver"
432 depends on MFD_TIMBERDALE && VIDEO_V4L2
Randy Dunlap53600442010-02-12 18:02:35 -0300433 depends on I2C # for RADIO_SAA7706H
Richard Röjforsd44d1f32010-02-03 12:59:39 -0300434 select RADIO_TEF6862
435 select RADIO_SAA7706H
436 ---help---
437 This is a kind of umbrella driver for the Radio Tuner and DSP
438 found behind the Timberdale FPGA on the Russellville board.
439 Enabling this driver will automatically select the DSP and tuner.
440
Matti Aaltonen87d1a502010-12-10 11:41:34 -0300441config RADIO_WL1273
442 tristate "Texas Instruments WL1273 I2C FM Radio"
443 depends on I2C && VIDEO_V4L2
Randy Dunlap1b149bb2011-02-27 14:51:54 -0300444 select MFD_CORE
Matti Aaltonen87d1a502010-12-10 11:41:34 -0300445 select MFD_WL1273_CORE
446 select FW_LOADER
447 ---help---
448 Choose Y here if you have this FM radio chip.
449
450 In order to control your radio card, you will need to use programs
451 that are compatible with the Video For Linux 2 API. Information on
452 this API and pointers to "v4l2" programs may be found at
453 <file:Documentation/video4linux/API.html>.
454
455 To compile this driver as a module, choose M here: the
456 module will be called radio-wl1273.
457
Manjunatha Halli57f05bf2011-01-24 02:26:59 -0300458# TI's ST based wl128x FM radio
459source "drivers/media/radio/wl128x/Kconfig"
460
Jan Engelhardtc5da5af2007-05-02 10:06:23 -0300461endif # RADIO_ADAPTERS