blob: 32e1eae6a25fd9f942453a5548bbf587937e4a92 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001 Samsung/Meritech SMDK2440
2 =========================
3
4Introduction
5------------
6
7 The SMDK2440 is a two part evaluation board for the Samsung S3C2440
8 processor. It includes support for LCD, SmartMedia, Audio, SD and
9 10MBit Ethernet, and expansion headers for various signals, including
10 the camera and unused GPIO.
11
12
13Configuration
14-------------
15
16 To set the default configuration, use `make smdk2440_defconfig` which
17 will configure the common features of this board, or use
18 `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
19
20
21Support
22-------
23
24 Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
25 includes linux based USB download tools.
26
27 Some of the h1940 patches that can be found from the H1940 project
28 site at http://www.handhelds.org/projects/h1940.html can also be
29 applied to this board.
30
31
32Peripherals
33-----------
34
35 There is no current support for any of the extra peripherals on the
36 base-board itself.
37
38
39MTD
40---
41
42 The NAND flash should be supported by the in kernel MTD NAND support,
43 NOR flash will be added later.
44
45
46Maintainers
47-----------
48
49 This board is being maintained by Ben Dooks, for more info, see
50 http://www.fluff.org/ben/smdk2440/
51
52 Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
53 and to Simtec Electronics for allowing me time to work on this.
54
55
56(c) 2004 Ben Dooks