blob: cf9559c6c9b64587829b894286754bb865b8546a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef __LINUX_HUB_H
2#define __LINUX_HUB_H
3
4/*
5 * Hub protocol and driver data structures.
6 *
7 * Some of these are known to the "virtual root hub" code
8 * in host controller drivers.
9 */
10
11#include <linux/list.h>
12#include <linux/workqueue.h>
13#include <linux/compiler.h> /* likely()/unlikely() */
14
15/*
16 * Hub request types
17 */
18
19#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
20#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
21
22/*
23 * Hub class requests
24 * See USB 2.0 spec Table 11-16
25 */
26#define HUB_CLEAR_TT_BUFFER 8
27#define HUB_RESET_TT 9
28#define HUB_GET_TT_STATE 10
29#define HUB_STOP_TT 11
30
31/*
32 * Hub Class feature numbers
33 * See USB 2.0 spec Table 11-17
34 */
35#define C_HUB_LOCAL_POWER 0
36#define C_HUB_OVER_CURRENT 1
37
38/*
39 * Port feature numbers
40 * See USB 2.0 spec Table 11-17
41 */
42#define USB_PORT_FEAT_CONNECTION 0
43#define USB_PORT_FEAT_ENABLE 1
44#define USB_PORT_FEAT_SUSPEND 2
45#define USB_PORT_FEAT_OVER_CURRENT 3
46#define USB_PORT_FEAT_RESET 4
47#define USB_PORT_FEAT_POWER 8
48#define USB_PORT_FEAT_LOWSPEED 9
49#define USB_PORT_FEAT_HIGHSPEED 10
50#define USB_PORT_FEAT_C_CONNECTION 16
51#define USB_PORT_FEAT_C_ENABLE 17
52#define USB_PORT_FEAT_C_SUSPEND 18
53#define USB_PORT_FEAT_C_OVER_CURRENT 19
54#define USB_PORT_FEAT_C_RESET 20
55#define USB_PORT_FEAT_TEST 21
56#define USB_PORT_FEAT_INDICATOR 22
57
58/*
59 * Hub Status and Hub Change results
60 * See USB 2.0 spec Table 11-19 and Table 11-20
61 */
62struct usb_port_status {
63 __le16 wPortStatus;
64 __le16 wPortChange;
65} __attribute__ ((packed));
66
67/*
68 * wPortStatus bit field
69 * See USB 2.0 spec Table 11-21
70 */
71#define USB_PORT_STAT_CONNECTION 0x0001
72#define USB_PORT_STAT_ENABLE 0x0002
73#define USB_PORT_STAT_SUSPEND 0x0004
74#define USB_PORT_STAT_OVERCURRENT 0x0008
75#define USB_PORT_STAT_RESET 0x0010
76/* bits 5 to 7 are reserved */
77#define USB_PORT_STAT_POWER 0x0100
78#define USB_PORT_STAT_LOW_SPEED 0x0200
79#define USB_PORT_STAT_HIGH_SPEED 0x0400
80#define USB_PORT_STAT_TEST 0x0800
81#define USB_PORT_STAT_INDICATOR 0x1000
82/* bits 13 to 15 are reserved */
83
84/*
85 * wPortChange bit field
86 * See USB 2.0 spec Table 11-22
87 * Bits 0 to 4 shown, bits 5 to 15 are reserved
88 */
89#define USB_PORT_STAT_C_CONNECTION 0x0001
90#define USB_PORT_STAT_C_ENABLE 0x0002
91#define USB_PORT_STAT_C_SUSPEND 0x0004
92#define USB_PORT_STAT_C_OVERCURRENT 0x0008
93#define USB_PORT_STAT_C_RESET 0x0010
94
95/*
96 * wHubCharacteristics (masks)
97 * See USB 2.0 spec Table 11-13, offset 3
98 */
99#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */
100#define HUB_CHAR_COMPOUND 0x0004 /* D2 */
101#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */
102#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */
103#define HUB_CHAR_PORTIND 0x0080 /* D7 */
104
105struct usb_hub_status {
106 __le16 wHubStatus;
107 __le16 wHubChange;
108} __attribute__ ((packed));
109
110/*
111 * Hub Status & Hub Change bit masks
112 * See USB 2.0 spec Table 11-19 and Table 11-20
113 * Bits 0 and 1 for wHubStatus and wHubChange
114 * Bits 2 to 15 are reserved for both
115 */
116#define HUB_STATUS_LOCAL_POWER 0x0001
117#define HUB_STATUS_OVERCURRENT 0x0002
118#define HUB_CHANGE_LOCAL_POWER 0x0001
119#define HUB_CHANGE_OVERCURRENT 0x0002
120
121
122/*
123 * Hub descriptor
124 * See USB 2.0 spec Table 11-13
125 */
126
127#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
128#define USB_DT_HUB_NONVAR_SIZE 7
129
130struct usb_hub_descriptor {
131 __u8 bDescLength;
132 __u8 bDescriptorType;
133 __u8 bNbrPorts;
Greg Kroah-Hartman74ad9bd2005-06-20 21:15:16 -0700134 __le16 wHubCharacteristics;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 __u8 bPwrOn2PwrGood;
136 __u8 bHubContrCurrent;
137 /* add 1 bit for hub status change; round to bytes */
138 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
139 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
140} __attribute__ ((packed));
141
142
143/* port indicator status selectors, tables 11-7 and 11-25 */
144#define HUB_LED_AUTO 0
145#define HUB_LED_AMBER 1
146#define HUB_LED_GREEN 2
147#define HUB_LED_OFF 3
148
149enum hub_led_mode {
150 INDICATOR_AUTO = 0,
151 INDICATOR_CYCLE,
152 /* software blinks for attention: software, hardware, reserved */
153 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
154 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
155 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
156} __attribute__ ((packed));
157
158struct usb_device;
159
david-b@pacbell.nete09711a2005-08-13 18:41:04 -0700160/* Transaction Translator Think Times, in bits */
161#define HUB_TTTT_8_BITS 0x00
162#define HUB_TTTT_16_BITS 0x20
163#define HUB_TTTT_24_BITS 0x40
164#define HUB_TTTT_32_BITS 0x60
165
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166/*
167 * As of USB 2.0, full/low speed devices are segregated into trees.
168 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
169 * The other type grows from high speed hubs when they connect to
170 * full/low speed devices using "Transaction Translators" (TTs).
171 *
172 * TTs should only be known to the hub driver, and high speed bus
173 * drivers (only EHCI for now). They affect periodic scheduling and
174 * sometimes control/bulk error recovery.
175 */
176struct usb_tt {
177 struct usb_device *hub; /* upstream highspeed hub */
178 int multi; /* true means one TT per port */
david-b@pacbell.nete09711a2005-08-13 18:41:04 -0700179 unsigned think_time; /* think time in ns */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180
181 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
182 spinlock_t lock;
183 struct list_head clear_list; /* of usb_tt_clear */
184 struct work_struct kevent;
185};
186
187struct usb_tt_clear {
188 struct list_head clear_list;
189 unsigned tt;
190 u16 devinfo;
191};
192
193extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe);
194
Linus Torvalds1da177e2005-04-16 15:20:36 -0700195#endif /* __LINUX_HUB_H */