blob: 3b5b5df04dd686ec77b20d32c16141ce44bc0865 [file] [log] [blame]
Nicolas Pitref40219b2006-11-17 01:07:26 -05001/*
2 * Philips UCB1400 touchscreen driver
3 *
4 * Author: Nicolas Pitre
5 * Created: September 25, 2006
6 * Copyright: MontaVista Software, Inc.
7 *
Marek Vašutd9105c22008-08-03 21:34:08 +01008 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
Lucas De Marchi25985ed2011-03-30 22:57:33 -03009 * If something doesn't work and it worked before spliting, e-mail me,
Marek Vašutd9105c22008-08-03 21:34:08 +010010 * dont bother Nicolas please ;-)
11 *
Nicolas Pitref40219b2006-11-17 01:07:26 -050012 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
17 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
18 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
19 */
20
21#include <linux/module.h>
Nicolas Pitref40219b2006-11-17 01:07:26 -050022#include <linux/init.h>
Nicolas Pitref40219b2006-11-17 01:07:26 -050023#include <linux/completion.h>
24#include <linux/delay.h>
25#include <linux/input.h>
26#include <linux/device.h>
27#include <linux/interrupt.h>
28#include <linux/suspend.h>
Nicolas Pitref40219b2006-11-17 01:07:26 -050029#include <linux/kthread.h>
Dmitry Torokhovbff19b12006-12-08 01:37:03 -050030#include <linux/freezer.h>
Marek Vašutd9105c22008-08-03 21:34:08 +010031#include <linux/ucb1400.h>
Nicolas Pitref40219b2006-11-17 01:07:26 -050032
33static int adcsync;
Cliff Brakeb5b16c52007-04-12 01:35:43 -040034static int ts_delay = 55; /* us */
35static int ts_delay_pressure; /* us */
Nicolas Pitref40219b2006-11-17 01:07:26 -050036
Nicolas Pitref40219b2006-11-17 01:07:26 -050037/* Switch to interrupt mode. */
Marek Vašutd9105c22008-08-03 21:34:08 +010038static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
Nicolas Pitref40219b2006-11-17 01:07:26 -050039{
Marek Vašutd9105c22008-08-03 21:34:08 +010040 ucb1400_reg_write(ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050041 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
42 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
43 UCB_TS_CR_MODE_INT);
44}
45
46/*
47 * Switch to pressure mode, and read pressure. We don't need to wait
48 * here, since both plates are being driven.
49 */
Marek Vašutd9105c22008-08-03 21:34:08 +010050static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -050051{
Marek Vašutd9105c22008-08-03 21:34:08 +010052 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050053 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
54 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
55 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Cliff Brakeb5b16c52007-04-12 01:35:43 -040056 udelay(ts_delay_pressure);
Marek Vašutd9105c22008-08-03 21:34:08 +010057 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
Nicolas Pitref40219b2006-11-17 01:07:26 -050058}
59
60/*
61 * Switch to X position mode and measure Y plate. We switch the plate
62 * configuration in pressure mode, then switch to position mode. This
63 * gives a faster response time. Even so, we need to wait about 55us
64 * for things to stabilise.
65 */
Marek Vašutd9105c22008-08-03 21:34:08 +010066static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -050067{
Marek Vašutd9105c22008-08-03 21:34:08 +010068 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050069 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
70 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +010071 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050072 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
73 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +010074 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050075 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
76 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
77
Cliff Brakeb5b16c52007-04-12 01:35:43 -040078 udelay(ts_delay);
Nicolas Pitref40219b2006-11-17 01:07:26 -050079
Marek Vašutd9105c22008-08-03 21:34:08 +010080 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
Nicolas Pitref40219b2006-11-17 01:07:26 -050081}
82
83/*
84 * Switch to Y position mode and measure X plate. We switch the plate
85 * configuration in pressure mode, then switch to position mode. This
86 * gives a faster response time. Even so, we need to wait about 55us
87 * for things to stabilise.
88 */
Marek Vašutd9105c22008-08-03 21:34:08 +010089static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -050090{
Marek Vašutd9105c22008-08-03 21:34:08 +010091 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050092 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
93 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +010094 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050095 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
96 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +010097 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -050098 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
99 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
100
Cliff Brakeb5b16c52007-04-12 01:35:43 -0400101 udelay(ts_delay);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500102
Marek Vašutd9105c22008-08-03 21:34:08 +0100103 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500104}
105
106/*
107 * Switch to X plate resistance mode. Set MX to ground, PX to
108 * supply. Measure current.
109 */
Marek Vašutd9105c22008-08-03 21:34:08 +0100110static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500111{
Marek Vašutd9105c22008-08-03 21:34:08 +0100112 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -0500113 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
114 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +0100115 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500116}
117
118/*
119 * Switch to Y plate resistance mode. Set MY to ground, PY to
120 * supply. Measure current.
121 */
Marek Vašutd9105c22008-08-03 21:34:08 +0100122static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500123{
Marek Vašutd9105c22008-08-03 21:34:08 +0100124 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
Nicolas Pitref40219b2006-11-17 01:07:26 -0500125 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
126 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
Marek Vašutd9105c22008-08-03 21:34:08 +0100127 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500128}
129
Hans J. Kochf9c22732009-07-12 20:51:25 -0700130static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500131{
Marek Vašutd9105c22008-08-03 21:34:08 +0100132 unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
Hans J. Kochf9c22732009-07-12 20:51:25 -0700133
Marek Vašutd9105c22008-08-03 21:34:08 +0100134 return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500135}
136
Marek Vašutd9105c22008-08-03 21:34:08 +0100137static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500138{
Marek Vašutd9105c22008-08-03 21:34:08 +0100139 ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
140 ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
141 ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500142}
143
Marek Vašutd9105c22008-08-03 21:34:08 +0100144static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500145{
Marek Vašutd9105c22008-08-03 21:34:08 +0100146 ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500147}
148
149static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
150{
151 input_report_abs(idev, ABS_X, x);
152 input_report_abs(idev, ABS_Y, y);
153 input_report_abs(idev, ABS_PRESSURE, pressure);
Mike Rapoportcd2d64b2009-03-04 01:12:49 -0800154 input_report_key(idev, BTN_TOUCH, 1);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500155 input_sync(idev);
156}
157
158static void ucb1400_ts_event_release(struct input_dev *idev)
159{
160 input_report_abs(idev, ABS_PRESSURE, 0);
Mike Rapoportcd2d64b2009-03-04 01:12:49 -0800161 input_report_key(idev, BTN_TOUCH, 0);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500162 input_sync(idev);
163}
164
Marek Vašutd9105c22008-08-03 21:34:08 +0100165static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500166{
167 unsigned int isr;
168
Marek Vašutd9105c22008-08-03 21:34:08 +0100169 isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
170 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
171 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500172
Pavel Revak9b2fb2d2009-08-20 22:30:54 -0700173 if (isr & UCB_IE_TSPX)
Marek Vašutd9105c22008-08-03 21:34:08 +0100174 ucb1400_ts_irq_disable(ucb->ac97);
Pavel Revak9b2fb2d2009-08-20 22:30:54 -0700175 else
176 dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
177 enable_irq(ucb->irq);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500178}
179
180static int ucb1400_ts_thread(void *_ucb)
181{
Marek Vašutd9105c22008-08-03 21:34:08 +0100182 struct ucb1400_ts *ucb = _ucb;
Nicolas Pitref40219b2006-11-17 01:07:26 -0500183 struct task_struct *tsk = current;
184 int valid = 0;
Satoru Takeuchic130bdb2007-05-14 23:52:07 -0400185 struct sched_param param = { .sched_priority = 1 };
Nicolas Pitref40219b2006-11-17 01:07:26 -0500186
Satoru Takeuchic130bdb2007-05-14 23:52:07 -0400187 sched_setscheduler(tsk, SCHED_FIFO, &param);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500188
Rafael J. Wysocki83144182007-07-17 04:03:35 -0700189 set_freezable();
Nicolas Pitref40219b2006-11-17 01:07:26 -0500190 while (!kthread_should_stop()) {
191 unsigned int x, y, p;
192 long timeout;
193
194 ucb->ts_restart = 0;
195
196 if (ucb->irq_pending) {
197 ucb->irq_pending = 0;
198 ucb1400_handle_pending_irq(ucb);
199 }
200
Marek Vašutd9105c22008-08-03 21:34:08 +0100201 ucb1400_adc_enable(ucb->ac97);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500202 x = ucb1400_ts_read_xpos(ucb);
203 y = ucb1400_ts_read_ypos(ucb);
204 p = ucb1400_ts_read_pressure(ucb);
Marek Vašutd9105c22008-08-03 21:34:08 +0100205 ucb1400_adc_disable(ucb->ac97);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500206
207 /* Switch back to interrupt mode. */
Marek Vašutd9105c22008-08-03 21:34:08 +0100208 ucb1400_ts_mode_int(ucb->ac97);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500209
210 msleep(10);
211
Hans J. Kochf9c22732009-07-12 20:51:25 -0700212 if (ucb1400_ts_pen_up(ucb->ac97)) {
Marek Vašutd9105c22008-08-03 21:34:08 +0100213 ucb1400_ts_irq_enable(ucb->ac97);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500214
215 /*
216 * If we spat out a valid sample set last time,
217 * spit out a "pen off" sample here.
218 */
219 if (valid) {
220 ucb1400_ts_event_release(ucb->ts_idev);
221 valid = 0;
222 }
223
224 timeout = MAX_SCHEDULE_TIMEOUT;
225 } else {
226 valid = 1;
227 ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
228 timeout = msecs_to_jiffies(10);
229 }
230
Rafael J. Wysockie42837b2007-10-18 03:04:45 -0700231 wait_event_freezable_timeout(ucb->ts_wait,
Marek Vašutd9105c22008-08-03 21:34:08 +0100232 ucb->irq_pending || ucb->ts_restart ||
233 kthread_should_stop(), timeout);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500234 }
235
236 /* Send the "pen off" if we are stopping with the pen still active */
237 if (valid)
238 ucb1400_ts_event_release(ucb->ts_idev);
239
240 ucb->ts_task = NULL;
241 return 0;
242}
243
244/*
245 * A restriction with interrupts exists when using the ucb1400, as
246 * the codec read/write routines may sleep while waiting for codec
247 * access completion and uses semaphores for access control to the
248 * AC97 bus. A complete codec read cycle could take anywhere from
249 * 60 to 100uSec so we *definitely* don't want to spin inside the
250 * interrupt handler waiting for codec access. So, we handle the
251 * interrupt by scheduling a RT kernel thread to run in process
252 * context instead of interrupt context.
253 */
254static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
255{
Marek Vašutd9105c22008-08-03 21:34:08 +0100256 struct ucb1400_ts *ucb = devid;
Nicolas Pitref40219b2006-11-17 01:07:26 -0500257
258 if (irqnr == ucb->irq) {
Ben Nizette3deb6492009-04-17 20:35:58 -0700259 disable_irq_nosync(ucb->irq);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500260 ucb->irq_pending = 1;
261 wake_up(&ucb->ts_wait);
262 return IRQ_HANDLED;
263 }
264 return IRQ_NONE;
265}
266
267static int ucb1400_ts_open(struct input_dev *idev)
268{
Marek Vašutd9105c22008-08-03 21:34:08 +0100269 struct ucb1400_ts *ucb = input_get_drvdata(idev);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500270 int ret = 0;
271
272 BUG_ON(ucb->ts_task);
273
274 ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
275 if (IS_ERR(ucb->ts_task)) {
276 ret = PTR_ERR(ucb->ts_task);
277 ucb->ts_task = NULL;
278 }
279
280 return ret;
281}
282
283static void ucb1400_ts_close(struct input_dev *idev)
284{
Marek Vašutd9105c22008-08-03 21:34:08 +0100285 struct ucb1400_ts *ucb = input_get_drvdata(idev);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500286
287 if (ucb->ts_task)
288 kthread_stop(ucb->ts_task);
289
Marek Vašutd9105c22008-08-03 21:34:08 +0100290 ucb1400_ts_irq_disable(ucb->ac97);
291 ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
292}
293
294#ifndef NO_IRQ
295#define NO_IRQ 0
296#endif
297
298/*
299 * Try to probe our interrupt, rather than relying on lots of
300 * hard-coded machine dependencies.
301 */
302static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
303{
304 unsigned long mask, timeout;
305
306 mask = probe_irq_on();
307
308 /* Enable the ADC interrupt. */
309 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
310 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
311 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
312 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
313
314 /* Cause an ADC interrupt. */
315 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
316 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
317
318 /* Wait for the conversion to complete. */
319 timeout = jiffies + HZ/2;
320 while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
321 UCB_ADC_DAT_VALID)) {
322 cpu_relax();
323 if (time_after(jiffies, timeout)) {
324 printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
325 probe_irq_off(mask);
326 return -ENODEV;
327 }
328 }
329 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
330
331 /* Disable and clear interrupt. */
332 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
333 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
334 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
335 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
336
337 /* Read triggered interrupt. */
338 ucb->irq = probe_irq_off(mask);
339 if (ucb->irq < 0 || ucb->irq == NO_IRQ)
340 return -ENODEV;
341
342 return 0;
343}
344
345static int ucb1400_ts_probe(struct platform_device *dev)
346{
347 int error, x_res, y_res;
Marek Vasut1700f5f2009-08-20 22:05:53 -0700348 u16 fcsr;
Marek Vašutd9105c22008-08-03 21:34:08 +0100349 struct ucb1400_ts *ucb = dev->dev.platform_data;
350
351 ucb->ts_idev = input_allocate_device();
352 if (!ucb->ts_idev) {
353 error = -ENOMEM;
354 goto err;
355 }
356
Marek Vasutfb141592009-11-08 19:45:54 -0800357 /* Only in case the IRQ line wasn't supplied, try detecting it */
358 if (ucb->irq < 0) {
359 error = ucb1400_ts_detect_irq(ucb);
360 if (error) {
361 printk(KERN_ERR "UCB1400: IRQ probe failed\n");
362 goto err_free_devs;
363 }
Marek Vašutd9105c22008-08-03 21:34:08 +0100364 }
365
366 init_waitqueue_head(&ucb->ts_wait);
367
368 error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
369 "UCB1400", ucb);
370 if (error) {
371 printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
372 ucb->irq, error);
373 goto err_free_devs;
374 }
375 printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
376
377 input_set_drvdata(ucb->ts_idev, ucb);
378
379 ucb->ts_idev->dev.parent = &dev->dev;
380 ucb->ts_idev->name = "UCB1400 touchscreen interface";
381 ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
382 AC97_VENDOR_ID1);
383 ucb->ts_idev->id.product = ucb->id;
384 ucb->ts_idev->open = ucb1400_ts_open;
385 ucb->ts_idev->close = ucb1400_ts_close;
Mike Rapoportcd2d64b2009-03-04 01:12:49 -0800386 ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
387 ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
Marek Vašutd9105c22008-08-03 21:34:08 +0100388
Marek Vasut1700f5f2009-08-20 22:05:53 -0700389 /*
390 * Enable ADC filter to prevent horrible jitter on Colibri.
391 * This also further reduces jitter on boards where ADCSYNC
392 * pin is connected.
393 */
394 fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
395 ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
396
Marek Vašutd9105c22008-08-03 21:34:08 +0100397 ucb1400_adc_enable(ucb->ac97);
398 x_res = ucb1400_ts_read_xres(ucb);
399 y_res = ucb1400_ts_read_yres(ucb);
400 ucb1400_adc_disable(ucb->ac97);
401 printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
402
403 input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
404 input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
405 input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
406
407 error = input_register_device(ucb->ts_idev);
408 if (error)
409 goto err_free_irq;
410
411 return 0;
412
413err_free_irq:
414 free_irq(ucb->irq, ucb);
415err_free_devs:
416 input_free_device(ucb->ts_idev);
417err:
418 return error;
419
420}
421
422static int ucb1400_ts_remove(struct platform_device *dev)
423{
424 struct ucb1400_ts *ucb = dev->dev.platform_data;
425
426 free_irq(ucb->irq, ucb);
427 input_unregister_device(ucb->ts_idev);
428 return 0;
Nicolas Pitref40219b2006-11-17 01:07:26 -0500429}
430
431#ifdef CONFIG_PM
Marek Vašutd9105c22008-08-03 21:34:08 +0100432static int ucb1400_ts_resume(struct platform_device *dev)
Nicolas Pitref40219b2006-11-17 01:07:26 -0500433{
Manuel Traut346a8502009-05-27 06:20:05 -0700434 struct ucb1400_ts *ucb = dev->dev.platform_data;
Nicolas Pitref40219b2006-11-17 01:07:26 -0500435
436 if (ucb->ts_task) {
437 /*
438 * Restart the TS thread to ensure the
439 * TS interrupt mode is set up again
440 * after sleep.
441 */
442 ucb->ts_restart = 1;
443 wake_up(&ucb->ts_wait);
444 }
445 return 0;
446}
447#else
448#define ucb1400_ts_resume NULL
449#endif
450
Marek Vašutd9105c22008-08-03 21:34:08 +0100451static struct platform_driver ucb1400_ts_driver = {
452 .probe = ucb1400_ts_probe,
453 .remove = ucb1400_ts_remove,
454 .resume = ucb1400_ts_resume,
455 .driver = {
456 .name = "ucb1400_ts",
457 },
Nicolas Pitref40219b2006-11-17 01:07:26 -0500458};
459
460static int __init ucb1400_ts_init(void)
461{
Marek Vašutd9105c22008-08-03 21:34:08 +0100462 return platform_driver_register(&ucb1400_ts_driver);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500463}
464
465static void __exit ucb1400_ts_exit(void)
466{
Marek Vašutd9105c22008-08-03 21:34:08 +0100467 platform_driver_unregister(&ucb1400_ts_driver);
Nicolas Pitref40219b2006-11-17 01:07:26 -0500468}
469
Cliff Brakeb5b16c52007-04-12 01:35:43 -0400470module_param(adcsync, bool, 0444);
471MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
472
473module_param(ts_delay, int, 0444);
Marek Vašutd9105c22008-08-03 21:34:08 +0100474MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
475 " position read. Default = 55us.");
Cliff Brakeb5b16c52007-04-12 01:35:43 -0400476
477module_param(ts_delay_pressure, int, 0444);
478MODULE_PARM_DESC(ts_delay_pressure,
Marek Vašutd9105c22008-08-03 21:34:08 +0100479 "delay between panel setup and pressure read."
480 " Default = 0us.");
Nicolas Pitref40219b2006-11-17 01:07:26 -0500481
482module_init(ucb1400_ts_init);
483module_exit(ucb1400_ts_exit);
484
485MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
486MODULE_LICENSE("GPL");