blob: 80cfbe56ea32150e634574de9f24b8451069e968 [file] [log] [blame]
/*
* linux/arch/m68k/kernel/setup.c
*
* Copyright (C) 1995 Hamish Macdonald
*/
/*
* This file handles the architecture-dependent parts of system setup
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/console.h>
#include <linux/genhd.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/module.h>
#include <linux/initrd.h>
#include <asm/bootinfo.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/fpu.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/machdep.h>
#ifdef CONFIG_AMIGA
#include <asm/amigahw.h>
#endif
#ifdef CONFIG_ATARI
#include <asm/atarihw.h>
#include <asm/atari_stram.h>
#endif
#ifdef CONFIG_SUN3X
#include <asm/dvma.h>
#endif
#include <asm/natfeat.h>
#if !FPSTATESIZE || !NR_IRQS
#warning No CPU/platform type selected, your kernel will not work!
#warning Are you building an allnoconfig kernel?
#endif
unsigned long m68k_machtype;
EXPORT_SYMBOL(m68k_machtype);
unsigned long m68k_cputype;
EXPORT_SYMBOL(m68k_cputype);
unsigned long m68k_fputype;
unsigned long m68k_mmutype;
EXPORT_SYMBOL(m68k_mmutype);
#ifdef CONFIG_VME
unsigned long vme_brdtype;
EXPORT_SYMBOL(vme_brdtype);
#endif
int m68k_is040or060;
EXPORT_SYMBOL(m68k_is040or060);
extern unsigned long availmem;
int m68k_num_memory;
EXPORT_SYMBOL(m68k_num_memory);
int m68k_realnum_memory;
EXPORT_SYMBOL(m68k_realnum_memory);
unsigned long m68k_memoffset;
struct mem_info m68k_memory[NUM_MEMINFO];
EXPORT_SYMBOL(m68k_memory);
struct mem_info m68k_ramdisk;
static char m68k_command_line[CL_SIZE];
void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*mach_get_model) (char *model);
void (*mach_get_hardware_list) (struct seq_file *m);
/* machine dependent timer functions */
int (*mach_hwclk) (int, struct rtc_time*);
EXPORT_SYMBOL(mach_hwclk);
int (*mach_set_clock_mmss) (unsigned long);
unsigned int (*mach_get_ss)(void);
int (*mach_get_rtc_pll)(struct rtc_pll_info *);
int (*mach_set_rtc_pll)(struct rtc_pll_info *);
EXPORT_SYMBOL(mach_get_ss);
EXPORT_SYMBOL(mach_get_rtc_pll);
EXPORT_SYMBOL(mach_set_rtc_pll);
void (*mach_reset)( void );
void (*mach_halt)( void );
void (*mach_power_off)( void );
long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
#ifdef CONFIG_HEARTBEAT
void (*mach_heartbeat) (int);
EXPORT_SYMBOL(mach_heartbeat);
#endif
#ifdef CONFIG_M68K_L2_CACHE
void (*mach_l2_flush) (int);
#endif
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
void (*mach_beep)(unsigned int, unsigned int);
EXPORT_SYMBOL(mach_beep);
#endif
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
int isa_type;
int isa_sex;
EXPORT_SYMBOL(isa_type);
EXPORT_SYMBOL(isa_sex);
#endif
extern int amiga_parse_bootinfo(const struct bi_record *);
extern int atari_parse_bootinfo(const struct bi_record *);
extern int mac_parse_bootinfo(const struct bi_record *);
extern int q40_parse_bootinfo(const struct bi_record *);
extern int bvme6000_parse_bootinfo(const struct bi_record *);
extern int mvme16x_parse_bootinfo(const struct bi_record *);
extern int mvme147_parse_bootinfo(const struct bi_record *);
extern int hp300_parse_bootinfo(const struct bi_record *);
extern int apollo_parse_bootinfo(const struct bi_record *);
extern void config_amiga(void);
extern void config_atari(void);
extern void config_mac(void);
extern void config_sun3(void);
extern void config_apollo(void);
extern void config_mvme147(void);
extern void config_mvme16x(void);
extern void config_bvme6000(void);
extern void config_hp300(void);
extern void config_q40(void);
extern void config_sun3x(void);
#define MASK_256K 0xfffc0000
extern void paging_init(void);
static void __init m68k_parse_bootinfo(const struct bi_record *record)
{
while (record->tag != BI_LAST) {
int unknown = 0;
const unsigned long *data = record->data;
switch (record->tag) {
case BI_MACHTYPE:
case BI_CPUTYPE:
case BI_FPUTYPE:
case BI_MMUTYPE:
/* Already set up by head.S */
break;
case BI_MEMCHUNK:
if (m68k_num_memory < NUM_MEMINFO) {
m68k_memory[m68k_num_memory].addr = data[0];
m68k_memory[m68k_num_memory].size = data[1];
m68k_num_memory++;
} else
printk("m68k_parse_bootinfo: too many memory chunks\n");
break;
case BI_RAMDISK:
m68k_ramdisk.addr = data[0];
m68k_ramdisk.size = data[1];
break;
case BI_COMMAND_LINE:
strlcpy(m68k_command_line, (const char *)data,
sizeof(m68k_command_line));
break;
default:
if (MACH_IS_AMIGA)
unknown = amiga_parse_bootinfo(record);
else if (MACH_IS_ATARI)
unknown = atari_parse_bootinfo(record);
else if (MACH_IS_MAC)
unknown = mac_parse_bootinfo(record);
else if (MACH_IS_Q40)
unknown = q40_parse_bootinfo(record);
else if (MACH_IS_BVME6000)
unknown = bvme6000_parse_bootinfo(record);
else if (MACH_IS_MVME16x)
unknown = mvme16x_parse_bootinfo(record);
else if (MACH_IS_MVME147)
unknown = mvme147_parse_bootinfo(record);
else if (MACH_IS_HP300)
unknown = hp300_parse_bootinfo(record);
else if (MACH_IS_APOLLO)
unknown = apollo_parse_bootinfo(record);
else
unknown = 1;
}
if (unknown)
printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
record->tag);
record = (struct bi_record *)((unsigned long)record +
record->size);
}
m68k_realnum_memory = m68k_num_memory;
#ifdef CONFIG_SINGLE_MEMORY_CHUNK
if (m68k_num_memory > 1) {
printk("Ignoring last %i chunks of physical memory\n",
(m68k_num_memory - 1));
m68k_num_memory = 1;
}
#endif
}
void __init setup_arch(char **cmdline_p)
{
#ifndef CONFIG_SUN3
int i;
#endif
/* The bootinfo is located right after the kernel bss */
if (!CPU_IS_COLDFIRE)
m68k_parse_bootinfo((const struct bi_record *)_end);
if (CPU_IS_040)
m68k_is040or060 = 4;
else if (CPU_IS_060)
m68k_is040or060 = 6;
/* FIXME: m68k_fputype is passed in by Penguin booter, which can
* be confused by software FPU emulation. BEWARE.
* We should really do our own FPU check at startup.
* [what do we do with buggy 68LC040s? if we have problems
* with them, we should add a test to check_bugs() below] */
#ifndef CONFIG_M68KFPU_EMU_ONLY
/* clear the fpu if we have one */
if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
volatile int zero = 0;
asm volatile ("frestore %0" : : "m" (zero));
}
#endif
if (CPU_IS_060) {
u32 pcr;
asm (".chip 68060; movec %%pcr,%0; .chip 68k"
: "=d" (pcr));
if (((pcr >> 8) & 0xff) <= 5) {
printk("Enabling workaround for errata I14\n");
asm (".chip 68060; movec %0,%%pcr; .chip 68k"
: : "d" (pcr | 0x20));
}
}
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
#if defined(CONFIG_BOOTPARAM)
strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
m68k_command_line[CL_SIZE - 1] = 0;
#endif /* CONFIG_BOOTPARAM */
*cmdline_p = m68k_command_line;
memcpy(boot_command_line, *cmdline_p, CL_SIZE);
parse_early_param();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
switch (m68k_machtype) {
#ifdef CONFIG_AMIGA
case MACH_AMIGA:
config_amiga();
break;
#endif
#ifdef CONFIG_ATARI
case MACH_ATARI:
config_atari();
break;
#endif
#ifdef CONFIG_MAC
case MACH_MAC:
config_mac();
break;
#endif
#ifdef CONFIG_SUN3
case MACH_SUN3:
config_sun3();
break;
#endif
#ifdef CONFIG_APOLLO
case MACH_APOLLO:
config_apollo();
break;
#endif
#ifdef CONFIG_MVME147
case MACH_MVME147:
config_mvme147();
break;
#endif
#ifdef CONFIG_MVME16x
case MACH_MVME16x:
config_mvme16x();
break;
#endif
#ifdef CONFIG_BVME6000
case MACH_BVME6000:
config_bvme6000();
break;
#endif
#ifdef CONFIG_HP300
case MACH_HP300:
config_hp300();
break;
#endif
#ifdef CONFIG_Q40
case MACH_Q40:
config_q40();
break;
#endif
#ifdef CONFIG_SUN3X
case MACH_SUN3X:
config_sun3x();
break;
#endif
#ifdef CONFIG_COLDFIRE
case MACH_M54XX:
config_BSP(NULL, 0);
break;
#endif
default:
panic("No configuration setup");
}
#ifdef CONFIG_NATFEAT
nf_init();
#endif
paging_init();
#ifndef CONFIG_SUN3
for (i = 1; i < m68k_num_memory; i++)
free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
m68k_memory[i].size);
#ifdef CONFIG_BLK_DEV_INITRD
if (m68k_ramdisk.size) {
reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
m68k_ramdisk.addr, m68k_ramdisk.size,
BOOTMEM_DEFAULT);
initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
initrd_end = initrd_start + m68k_ramdisk.size;
printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
}
#endif
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI)
atari_stram_reserve_pages((void *)availmem);
#endif
#ifdef CONFIG_SUN3X
if (MACH_IS_SUN3X) {
dvma_init();
}
#endif
#endif /* !CONFIG_SUN3 */
/* set ISA defs early as possible */
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
if (MACH_IS_Q40) {
isa_type = ISA_TYPE_Q40;
isa_sex = 0;
}
#ifdef CONFIG_AMIGA_PCMCIA
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
isa_type = ISA_TYPE_AG;
isa_sex = 1;
}
#endif
#endif
}
static int show_cpuinfo(struct seq_file *m, void *v)
{
const char *cpu, *mmu, *fpu;
unsigned long clockfreq, clockfactor;
#define LOOP_CYCLES_68020 (8)
#define LOOP_CYCLES_68030 (8)
#define LOOP_CYCLES_68040 (3)
#define LOOP_CYCLES_68060 (1)
#define LOOP_CYCLES_COLDFIRE (2)
if (CPU_IS_020) {
cpu = "68020";
clockfactor = LOOP_CYCLES_68020;
} else if (CPU_IS_030) {
cpu = "68030";
clockfactor = LOOP_CYCLES_68030;
} else if (CPU_IS_040) {
cpu = "68040";
clockfactor = LOOP_CYCLES_68040;
} else if (CPU_IS_060) {
cpu = "68060";
clockfactor = LOOP_CYCLES_68060;
} else if (CPU_IS_COLDFIRE) {
cpu = "ColdFire";
clockfactor = LOOP_CYCLES_COLDFIRE;
} else {
cpu = "680x0";
clockfactor = 0;
}
#ifdef CONFIG_M68KFPU_EMU_ONLY
fpu = "none(soft float)";
#else
if (m68k_fputype & FPU_68881)
fpu = "68881";
else if (m68k_fputype & FPU_68882)
fpu = "68882";
else if (m68k_fputype & FPU_68040)
fpu = "68040";
else if (m68k_fputype & FPU_68060)
fpu = "68060";
else if (m68k_fputype & FPU_SUNFPA)
fpu = "Sun FPA";
else if (m68k_fputype & FPU_COLDFIRE)
fpu = "ColdFire";
else
fpu = "none";
#endif
if (m68k_mmutype & MMU_68851)
mmu = "68851";
else if (m68k_mmutype & MMU_68030)
mmu = "68030";
else if (m68k_mmutype & MMU_68040)
mmu = "68040";
else if (m68k_mmutype & MMU_68060)
mmu = "68060";
else if (m68k_mmutype & MMU_SUN3)
mmu = "Sun-3";
else if (m68k_mmutype & MMU_APOLLO)
mmu = "Apollo";
else if (m68k_mmutype & MMU_COLDFIRE)
mmu = "ColdFire";
else
mmu = "unknown";
clockfreq = loops_per_jiffy * HZ * clockfactor;
seq_printf(m, "CPU:\t\t%s\n"
"MMU:\t\t%s\n"
"FPU:\t\t%s\n"
"Clocking:\t%lu.%1luMHz\n"
"BogoMips:\t%lu.%02lu\n"
"Calibration:\t%lu loops\n",
cpu, mmu, fpu,
clockfreq/1000000,(clockfreq/100000)%10,
loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
loops_per_jiffy);
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < 1 ? (void *)1 : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return NULL;
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
#ifdef CONFIG_PROC_HARDWARE
static int hardware_proc_show(struct seq_file *m, void *v)
{
char model[80];
unsigned long mem;
int i;
if (mach_get_model)
mach_get_model(model);
else
strcpy(model, "Unknown m68k");
seq_printf(m, "Model:\t\t%s\n", model);
for (mem = 0, i = 0; i < m68k_num_memory; i++)
mem += m68k_memory[i].size;
seq_printf(m, "System Memory:\t%ldK\n", mem >> 10);
if (mach_get_hardware_list)
mach_get_hardware_list(m);
return 0;
}
static int hardware_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, hardware_proc_show, NULL);
}
static const struct file_operations hardware_proc_fops = {
.open = hardware_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init proc_hardware_init(void)
{
proc_create("hardware", 0, NULL, &hardware_proc_fops);
return 0;
}
module_init(proc_hardware_init);
#endif
void check_bugs(void)
{
#ifndef CONFIG_M68KFPU_EMU
if (m68k_fputype == 0) {
printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
"WHICH IS REQUIRED BY LINUX/M68K ***\n");
printk(KERN_EMERG "Upgrade your hardware or join the FPU "
"emulation project\n");
panic("no FPU");
}
#endif /* !CONFIG_M68KFPU_EMU */
}
#ifdef CONFIG_ADB
static int __init adb_probe_sync_enable (char *str) {
extern int __adb_probe_sync;
__adb_probe_sync = 1;
return 1;
}
__setup("adb_sync", adb_probe_sync_enable);
#endif /* CONFIG_ADB */