| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2012 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| *****************************************************************************/ |
| |
| #ifndef __RTL_USB_H__ |
| #define __RTL_USB_H__ |
| |
| #include <linux/skbuff.h> |
| |
| #define RTL_RX_DESC_SIZE 24 |
| |
| #define RTL_USB_DEVICE(vend, prod, cfg) \ |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ |
| .idVendor = (vend), \ |
| .idProduct = (prod), \ |
| .driver_info = (kernel_ulong_t)&(cfg) |
| |
| #define USB_HIGH_SPEED_BULK_SIZE 512 |
| #define USB_FULL_SPEED_BULK_SIZE 64 |
| |
| |
| #define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */ |
| #define RTL_USB_MAX_EP_NUM 6 /* max ep number */ |
| #define RTL_USB_MAX_TX_URBS_NUM 8 |
| |
| enum rtl_txq { |
| /* These definitions shall be consistent with value |
| * returned by skb_get_queue_mapping |
| *------------------------------------*/ |
| RTL_TXQ_BK, |
| RTL_TXQ_BE, |
| RTL_TXQ_VI, |
| RTL_TXQ_VO, |
| /*------------------------------------*/ |
| RTL_TXQ_BCN, |
| RTL_TXQ_MGT, |
| RTL_TXQ_HI, |
| |
| /* Must be last */ |
| __RTL_TXQ_NUM, |
| }; |
| |
| struct rtl_ep_map { |
| u32 ep_mapping[__RTL_TXQ_NUM]; |
| }; |
| |
| struct _trx_info { |
| struct rtl_usb *rtlusb; |
| u32 ep_num; |
| }; |
| |
| static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb, |
| struct sk_buff *skb, |
| u32 ep_num) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| info->rate_driver_data[0] = rtlusb; |
| info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num; |
| } |
| |
| |
| /* Add suspend/resume later */ |
| enum rtl_usb_state { |
| USB_STATE_STOP = 0, |
| USB_STATE_START = 1, |
| }; |
| |
| #define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state) |
| #define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state) |
| #define SET_USB_STOP(rtlusb_ptr) \ |
| do { \ |
| (rtlusb_ptr)->state = USB_STATE_STOP; \ |
| } while (0) |
| |
| #define SET_USB_START(rtlusb_ptr) \ |
| do { \ |
| (rtlusb_ptr)->state = USB_STATE_START; \ |
| } while (0) |
| |
| struct rtl_usb { |
| struct usb_device *udev; |
| struct usb_interface *intf; |
| enum rtl_usb_state state; |
| |
| /* Bcn control register setting */ |
| u32 reg_bcn_ctrl_val; |
| /* for 88/92cu card disable */ |
| u8 disableHWSM; |
| /*QOS & EDCA */ |
| enum acm_method acm_method; |
| /* irq . HIMR,HIMR_EX */ |
| u32 irq_mask[2]; |
| bool irq_enabled; |
| |
| u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index); |
| |
| /* Tx */ |
| u8 out_ep_nums ; |
| u8 out_queue_sel; |
| struct rtl_ep_map ep_map; |
| |
| u32 max_bulk_out_size; |
| u32 tx_submitted_urbs; |
| struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM]; |
| |
| struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM]; |
| struct usb_anchor tx_submitted; |
| |
| struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *, |
| struct sk_buff_head *); |
| int (*usb_tx_post_hdl)(struct ieee80211_hw *, |
| struct urb *, struct sk_buff *); |
| void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *); |
| |
| /* Rx */ |
| u8 in_ep_nums ; |
| u32 in_ep; /* Bulk IN endpoint number */ |
| u32 rx_max_size; /* Bulk IN max buffer size */ |
| u32 rx_urb_num; /* How many Bulk INs are submitted to host. */ |
| struct usb_anchor rx_submitted; |
| void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *, |
| struct sk_buff_head *); |
| void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *); |
| }; |
| |
| struct rtl_usb_priv { |
| struct rtl_usb dev; |
| struct rtl_led_ctl ledctl; |
| }; |
| |
| #define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv)) |
| #define rtl_usbdev(usbpriv) (&((usbpriv)->dev)) |
| |
| |
| |
| int rtl_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id, |
| struct rtl_hal_cfg *rtl92cu_hal_cfg); |
| void rtl_usb_disconnect(struct usb_interface *intf); |
| int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); |
| int rtl_usb_resume(struct usb_interface *pusb_intf); |
| |
| #endif |