| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2003-2012, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| |
| #include <linux/pci.h> |
| #include <linux/kthread.h> |
| #include <linux/interrupt.h> |
| #include <linux/fs.h> |
| #include <linux/jiffies.h> |
| |
| #include <linux/mei.h> |
| |
| #include "mei_dev.h" |
| #include "hbm.h" |
| #include "hw-me.h" |
| #include "client.h" |
| |
| |
| /** |
| * mei_complete_handler - processes completed operation. |
| * |
| * @cl: private data of the file object. |
| * @cb_pos: callback block. |
| */ |
| void mei_irq_complete_handler(struct mei_cl *cl, struct mei_cl_cb *cb_pos) |
| { |
| if (cb_pos->fop_type == MEI_FOP_WRITE) { |
| mei_io_cb_free(cb_pos); |
| cb_pos = NULL; |
| cl->writing_state = MEI_WRITE_COMPLETE; |
| if (waitqueue_active(&cl->tx_wait)) |
| wake_up_interruptible(&cl->tx_wait); |
| |
| } else if (cb_pos->fop_type == MEI_FOP_READ && |
| MEI_READING == cl->reading_state) { |
| cl->reading_state = MEI_READ_COMPLETE; |
| if (waitqueue_active(&cl->rx_wait)) |
| wake_up_interruptible(&cl->rx_wait); |
| |
| } |
| } |
| |
| /** |
| * _mei_irq_thread_state_ok - checks if mei header matches file private data |
| * |
| * @cl: private data of the file object |
| * @mei_hdr: header of mei client message |
| * |
| * returns !=0 if matches, 0 if no match. |
| */ |
| static int _mei_irq_thread_state_ok(struct mei_cl *cl, |
| struct mei_msg_hdr *mei_hdr) |
| { |
| return (cl->host_client_id == mei_hdr->host_addr && |
| cl->me_client_id == mei_hdr->me_addr && |
| cl->state == MEI_FILE_CONNECTED && |
| MEI_READ_COMPLETE != cl->reading_state); |
| } |
| |
| /** |
| * mei_irq_thread_read_client_message - bottom half read routine after ISR to |
| * handle the read mei client message data processing. |
| * |
| * @complete_list: An instance of our list structure |
| * @dev: the device structure |
| * @mei_hdr: header of mei client message |
| * |
| * returns 0 on success, <0 on failure. |
| */ |
| static int mei_irq_thread_read_client_message(struct mei_cl_cb *complete_list, |
| struct mei_device *dev, |
| struct mei_msg_hdr *mei_hdr) |
| { |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL; |
| unsigned char *buffer = NULL; |
| |
| dev_dbg(&dev->pdev->dev, "start client msg\n"); |
| if (list_empty(&dev->read_list.list)) |
| goto quit; |
| |
| list_for_each_entry_safe(cb_pos, cb_next, &dev->read_list.list, list) { |
| cl = cb_pos->cl; |
| if (cl && _mei_irq_thread_state_ok(cl, mei_hdr)) { |
| cl->reading_state = MEI_READING; |
| buffer = cb_pos->response_buffer.data + cb_pos->buf_idx; |
| |
| if (cb_pos->response_buffer.size < |
| mei_hdr->length + cb_pos->buf_idx) { |
| dev_dbg(&dev->pdev->dev, "message overflow.\n"); |
| list_del(&cb_pos->list); |
| return -ENOMEM; |
| } |
| if (buffer) |
| mei_read_slots(dev, buffer, mei_hdr->length); |
| |
| cb_pos->buf_idx += mei_hdr->length; |
| if (mei_hdr->msg_complete) { |
| cl->status = 0; |
| list_del(&cb_pos->list); |
| dev_dbg(&dev->pdev->dev, |
| "completed read H cl = %d, ME cl = %d, length = %lu\n", |
| cl->host_client_id, |
| cl->me_client_id, |
| cb_pos->buf_idx); |
| |
| list_add_tail(&cb_pos->list, |
| &complete_list->list); |
| } |
| |
| break; |
| } |
| |
| } |
| |
| quit: |
| dev_dbg(&dev->pdev->dev, "message read\n"); |
| if (!buffer) { |
| mei_read_slots(dev, dev->rd_msg_buf, mei_hdr->length); |
| dev_dbg(&dev->pdev->dev, "discarding message " MEI_HDR_FMT "\n", |
| MEI_HDR_PRM(mei_hdr)); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _mei_irq_thread_close - processes close related operation. |
| * |
| * @dev: the device structure. |
| * @slots: free slots. |
| * @cb_pos: callback block. |
| * @cl: private data of the file object. |
| * @cmpl_list: complete list. |
| * |
| * returns 0, OK; otherwise, error. |
| */ |
| static int _mei_irq_thread_close(struct mei_device *dev, s32 *slots, |
| struct mei_cl_cb *cb_pos, |
| struct mei_cl *cl, |
| struct mei_cl_cb *cmpl_list) |
| { |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + |
| sizeof(struct hbm_client_connect_request))) |
| return -EBADMSG; |
| |
| *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); |
| |
| if (mei_hbm_cl_disconnect_req(dev, cl)) { |
| cl->status = 0; |
| cb_pos->buf_idx = 0; |
| list_move_tail(&cb_pos->list, &cmpl_list->list); |
| return -EMSGSIZE; |
| } else { |
| cl->state = MEI_FILE_DISCONNECTING; |
| cl->status = 0; |
| cb_pos->buf_idx = 0; |
| list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list); |
| cl->timer_count = MEI_CONNECT_TIMEOUT; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * _mei_hb_read - processes read related operation. |
| * |
| * @dev: the device structure. |
| * @slots: free slots. |
| * @cb_pos: callback block. |
| * @cl: private data of the file object. |
| * @cmpl_list: complete list. |
| * |
| * returns 0, OK; otherwise, error. |
| */ |
| static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots, |
| struct mei_cl_cb *cb_pos, |
| struct mei_cl *cl, |
| struct mei_cl_cb *cmpl_list) |
| { |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + |
| sizeof(struct hbm_flow_control))) { |
| /* return the cancel routine */ |
| list_del(&cb_pos->list); |
| return -EBADMSG; |
| } |
| |
| *slots -= mei_data2slots(sizeof(struct hbm_flow_control)); |
| |
| if (mei_hbm_cl_flow_control_req(dev, cl)) { |
| cl->status = -ENODEV; |
| cb_pos->buf_idx = 0; |
| list_move_tail(&cb_pos->list, &cmpl_list->list); |
| return -ENODEV; |
| } |
| list_move_tail(&cb_pos->list, &dev->read_list.list); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * _mei_irq_thread_ioctl - processes ioctl related operation. |
| * |
| * @dev: the device structure. |
| * @slots: free slots. |
| * @cb_pos: callback block. |
| * @cl: private data of the file object. |
| * @cmpl_list: complete list. |
| * |
| * returns 0, OK; otherwise, error. |
| */ |
| static int _mei_irq_thread_ioctl(struct mei_device *dev, s32 *slots, |
| struct mei_cl_cb *cb_pos, |
| struct mei_cl *cl, |
| struct mei_cl_cb *cmpl_list) |
| { |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + |
| sizeof(struct hbm_client_connect_request))) { |
| /* return the cancel routine */ |
| list_del(&cb_pos->list); |
| return -EBADMSG; |
| } |
| |
| cl->state = MEI_FILE_CONNECTING; |
| *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); |
| if (mei_hbm_cl_connect_req(dev, cl)) { |
| cl->status = -ENODEV; |
| cb_pos->buf_idx = 0; |
| list_del(&cb_pos->list); |
| return -ENODEV; |
| } else { |
| list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list); |
| cl->timer_count = MEI_CONNECT_TIMEOUT; |
| } |
| return 0; |
| } |
| |
| /** |
| * mei_irq_thread_write_complete - write messages to device. |
| * |
| * @dev: the device structure. |
| * @slots: free slots. |
| * @cb: callback block. |
| * @cmpl_list: complete list. |
| * |
| * returns 0, OK; otherwise, error. |
| */ |
| static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots, |
| struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct mei_cl *cl = cb->cl; |
| size_t len = cb->request_buffer.size - cb->buf_idx; |
| size_t msg_slots = mei_data2slots(len); |
| |
| mei_hdr.host_addr = cl->host_client_id; |
| mei_hdr.me_addr = cl->me_client_id; |
| mei_hdr.reserved = 0; |
| |
| if (*slots >= msg_slots) { |
| mei_hdr.length = len; |
| mei_hdr.msg_complete = 1; |
| /* Split the message only if we can write the whole host buffer */ |
| } else if (*slots == dev->hbuf_depth) { |
| msg_slots = *slots; |
| len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr); |
| mei_hdr.length = len; |
| mei_hdr.msg_complete = 0; |
| } else { |
| /* wait for next time the host buffer is empty */ |
| return 0; |
| } |
| |
| dev_dbg(&dev->pdev->dev, "buf: size = %d idx = %lu\n", |
| cb->request_buffer.size, cb->buf_idx); |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr)); |
| |
| *slots -= msg_slots; |
| if (mei_write_message(dev, &mei_hdr, |
| cb->request_buffer.data + cb->buf_idx)) { |
| cl->status = -ENODEV; |
| list_move_tail(&cb->list, &cmpl_list->list); |
| return -ENODEV; |
| } |
| |
| if (mei_cl_flow_ctrl_reduce(cl)) |
| return -ENODEV; |
| |
| cl->status = 0; |
| cb->buf_idx += mei_hdr.length; |
| if (mei_hdr.msg_complete) |
| list_move_tail(&cb->list, &dev->write_waiting_list.list); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_irq_thread_read_handler - bottom half read routine after ISR to |
| * handle the read processing. |
| * |
| * @dev: the device structure |
| * @cmpl_list: An instance of our list structure |
| * @slots: slots to read. |
| * |
| * returns 0 on success, <0 on failure. |
| */ |
| int mei_irq_read_handler(struct mei_device *dev, |
| struct mei_cl_cb *cmpl_list, s32 *slots) |
| { |
| struct mei_msg_hdr *mei_hdr; |
| struct mei_cl *cl_pos = NULL; |
| struct mei_cl *cl_next = NULL; |
| int ret = 0; |
| |
| if (!dev->rd_msg_hdr) { |
| dev->rd_msg_hdr = mei_read_hdr(dev); |
| dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); |
| (*slots)--; |
| dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); |
| } |
| mei_hdr = (struct mei_msg_hdr *) &dev->rd_msg_hdr; |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); |
| |
| if (mei_hdr->reserved || !dev->rd_msg_hdr) { |
| dev_dbg(&dev->pdev->dev, "corrupted message header.\n"); |
| ret = -EBADMSG; |
| goto end; |
| } |
| |
| if (mei_hdr->host_addr || mei_hdr->me_addr) { |
| list_for_each_entry_safe(cl_pos, cl_next, |
| &dev->file_list, link) { |
| dev_dbg(&dev->pdev->dev, |
| "list_for_each_entry_safe read host" |
| " client = %d, ME client = %d\n", |
| cl_pos->host_client_id, |
| cl_pos->me_client_id); |
| if (cl_pos->host_client_id == mei_hdr->host_addr && |
| cl_pos->me_client_id == mei_hdr->me_addr) |
| break; |
| } |
| |
| if (&cl_pos->link == &dev->file_list) { |
| dev_dbg(&dev->pdev->dev, "corrupted message header\n"); |
| ret = -EBADMSG; |
| goto end; |
| } |
| } |
| if (((*slots) * sizeof(u32)) < mei_hdr->length) { |
| dev_dbg(&dev->pdev->dev, |
| "we can't read the message slots =%08x.\n", |
| *slots); |
| /* we can't read the message */ |
| ret = -ERANGE; |
| goto end; |
| } |
| |
| /* decide where to read the message too */ |
| if (!mei_hdr->host_addr) { |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_bus_message.\n"); |
| mei_hbm_dispatch(dev, mei_hdr); |
| dev_dbg(&dev->pdev->dev, "end mei_irq_thread_read_bus_message.\n"); |
| } else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id && |
| (MEI_FILE_CONNECTED == dev->iamthif_cl.state) && |
| (dev->iamthif_state == MEI_IAMTHIF_READING)) { |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_iamthif_message.\n"); |
| |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); |
| |
| ret = mei_amthif_irq_read_message(cmpl_list, dev, mei_hdr); |
| if (ret) |
| goto end; |
| } else { |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_client_message.\n"); |
| ret = mei_irq_thread_read_client_message(cmpl_list, |
| dev, mei_hdr); |
| if (ret) |
| goto end; |
| |
| } |
| |
| /* reset the number of slots and header */ |
| *slots = mei_count_full_read_slots(dev); |
| dev->rd_msg_hdr = 0; |
| |
| if (*slots == -EOVERFLOW) { |
| /* overflow - reset */ |
| dev_dbg(&dev->pdev->dev, "resetting due to slots overflow.\n"); |
| /* set the event since message has been read */ |
| ret = -ERANGE; |
| goto end; |
| } |
| end: |
| return ret; |
| } |
| |
| |
| /** |
| * mei_irq_write_handler - dispatch write requests |
| * after irq received |
| * |
| * @dev: the device structure |
| * @cmpl_list: An instance of our list structure |
| * |
| * returns 0 on success, <0 on failure. |
| */ |
| int mei_irq_write_handler(struct mei_device *dev, |
| struct mei_cl_cb *cmpl_list) |
| { |
| |
| struct mei_cl *cl; |
| struct mei_cl_cb *pos = NULL, *next = NULL; |
| struct mei_cl_cb *list; |
| s32 slots; |
| int ret; |
| |
| if (!mei_hbuf_is_ready(dev)) { |
| dev_dbg(&dev->pdev->dev, "host buffer is not empty.\n"); |
| return 0; |
| } |
| slots = mei_hbuf_empty_slots(dev); |
| if (slots <= 0) |
| return -EMSGSIZE; |
| |
| /* complete all waiting for write CB */ |
| dev_dbg(&dev->pdev->dev, "complete all waiting for write cb.\n"); |
| |
| list = &dev->write_waiting_list; |
| list_for_each_entry_safe(pos, next, &list->list, list) { |
| cl = pos->cl; |
| if (cl == NULL) |
| continue; |
| |
| cl->status = 0; |
| list_del(&pos->list); |
| if (MEI_WRITING == cl->writing_state && |
| pos->fop_type == MEI_FOP_WRITE && |
| cl != &dev->iamthif_cl) { |
| dev_dbg(&dev->pdev->dev, "MEI WRITE COMPLETE\n"); |
| cl->writing_state = MEI_WRITE_COMPLETE; |
| list_add_tail(&pos->list, &cmpl_list->list); |
| } |
| if (cl == &dev->iamthif_cl) { |
| dev_dbg(&dev->pdev->dev, "check iamthif flow control.\n"); |
| if (dev->iamthif_flow_control_pending) { |
| ret = mei_amthif_irq_read(dev, &slots); |
| if (ret) |
| return ret; |
| } |
| } |
| } |
| |
| if (dev->wd_state == MEI_WD_STOPPING) { |
| dev->wd_state = MEI_WD_IDLE; |
| wake_up_interruptible(&dev->wait_stop_wd); |
| } |
| |
| if (dev->wr_ext_msg.hdr.length) { |
| mei_write_message(dev, &dev->wr_ext_msg.hdr, |
| dev->wr_ext_msg.data); |
| slots -= mei_data2slots(dev->wr_ext_msg.hdr.length); |
| dev->wr_ext_msg.hdr.length = 0; |
| } |
| if (dev->dev_state == MEI_DEV_ENABLED) { |
| if (dev->wd_pending && |
| mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { |
| if (mei_wd_send(dev)) |
| dev_dbg(&dev->pdev->dev, "wd send failed.\n"); |
| else if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) |
| return -ENODEV; |
| |
| dev->wd_pending = false; |
| |
| if (dev->wd_state == MEI_WD_RUNNING) |
| slots -= mei_data2slots(MEI_WD_START_MSG_SIZE); |
| else |
| slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE); |
| } |
| } |
| |
| /* complete control write list CB */ |
| dev_dbg(&dev->pdev->dev, "complete control write list cb.\n"); |
| list_for_each_entry_safe(pos, next, &dev->ctrl_wr_list.list, list) { |
| cl = pos->cl; |
| if (!cl) { |
| list_del(&pos->list); |
| return -ENODEV; |
| } |
| switch (pos->fop_type) { |
| case MEI_FOP_CLOSE: |
| /* send disconnect message */ |
| ret = _mei_irq_thread_close(dev, &slots, pos, |
| cl, cmpl_list); |
| if (ret) |
| return ret; |
| |
| break; |
| case MEI_FOP_READ: |
| /* send flow control message */ |
| ret = _mei_irq_thread_read(dev, &slots, pos, |
| cl, cmpl_list); |
| if (ret) |
| return ret; |
| |
| break; |
| case MEI_FOP_IOCTL: |
| /* connect message */ |
| if (mei_cl_is_other_connecting(cl)) |
| continue; |
| ret = _mei_irq_thread_ioctl(dev, &slots, pos, |
| cl, cmpl_list); |
| if (ret) |
| return ret; |
| |
| break; |
| |
| default: |
| BUG(); |
| } |
| |
| } |
| /* complete write list CB */ |
| dev_dbg(&dev->pdev->dev, "complete write list cb.\n"); |
| list_for_each_entry_safe(pos, next, &dev->write_list.list, list) { |
| cl = pos->cl; |
| if (cl == NULL) |
| continue; |
| if (mei_cl_flow_ctrl_creds(cl) <= 0) { |
| dev_dbg(&dev->pdev->dev, |
| "No flow control credentials for client %d, not sending.\n", |
| cl->host_client_id); |
| continue; |
| } |
| |
| if (cl == &dev->iamthif_cl) |
| ret = mei_amthif_irq_write_complete(dev, &slots, |
| pos, cmpl_list); |
| else |
| ret = mei_irq_thread_write_complete(dev, &slots, pos, |
| cmpl_list); |
| if (ret) |
| return ret; |
| |
| } |
| return 0; |
| } |
| |
| |
| |
| /** |
| * mei_timer - timer function. |
| * |
| * @work: pointer to the work_struct structure |
| * |
| * NOTE: This function is called by timer interrupt work |
| */ |
| void mei_timer(struct work_struct *work) |
| { |
| unsigned long timeout; |
| struct mei_cl *cl_pos = NULL; |
| struct mei_cl *cl_next = NULL; |
| struct mei_cl_cb *cb_pos = NULL; |
| struct mei_cl_cb *cb_next = NULL; |
| |
| struct mei_device *dev = container_of(work, |
| struct mei_device, timer_work.work); |
| |
| |
| mutex_lock(&dev->device_lock); |
| if (dev->dev_state != MEI_DEV_ENABLED) { |
| if (dev->dev_state == MEI_DEV_INIT_CLIENTS) { |
| if (dev->init_clients_timer) { |
| if (--dev->init_clients_timer == 0) { |
| dev_dbg(&dev->pdev->dev, "IMEI reset due to init clients timeout ,init clients state = %d.\n", |
| dev->init_clients_state); |
| mei_reset(dev, 1); |
| } |
| } |
| } |
| goto out; |
| } |
| /*** connect/disconnect timeouts ***/ |
| list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) { |
| if (cl_pos->timer_count) { |
| if (--cl_pos->timer_count == 0) { |
| dev_dbg(&dev->pdev->dev, "HECI reset due to connect/disconnect timeout.\n"); |
| mei_reset(dev, 1); |
| goto out; |
| } |
| } |
| } |
| |
| if (dev->iamthif_stall_timer) { |
| if (--dev->iamthif_stall_timer == 0) { |
| dev_dbg(&dev->pdev->dev, "resetting because of hang to amthi.\n"); |
| mei_reset(dev, 1); |
| dev->iamthif_msg_buf_size = 0; |
| dev->iamthif_msg_buf_index = 0; |
| dev->iamthif_canceled = false; |
| dev->iamthif_ioctl = true; |
| dev->iamthif_state = MEI_IAMTHIF_IDLE; |
| dev->iamthif_timer = 0; |
| |
| mei_io_cb_free(dev->iamthif_current_cb); |
| dev->iamthif_current_cb = NULL; |
| |
| dev->iamthif_file_object = NULL; |
| mei_amthif_run_next_cmd(dev); |
| } |
| } |
| |
| if (dev->iamthif_timer) { |
| |
| timeout = dev->iamthif_timer + |
| mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); |
| |
| dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n", |
| dev->iamthif_timer); |
| dev_dbg(&dev->pdev->dev, "timeout = %ld\n", timeout); |
| dev_dbg(&dev->pdev->dev, "jiffies = %ld\n", jiffies); |
| if (time_after(jiffies, timeout)) { |
| /* |
| * User didn't read the AMTHI data on time (15sec) |
| * freeing AMTHI for other requests |
| */ |
| |
| dev_dbg(&dev->pdev->dev, "freeing AMTHI for other requests\n"); |
| |
| list_for_each_entry_safe(cb_pos, cb_next, |
| &dev->amthif_rd_complete_list.list, list) { |
| |
| cl_pos = cb_pos->file_object->private_data; |
| |
| /* Finding the AMTHI entry. */ |
| if (cl_pos == &dev->iamthif_cl) |
| list_del(&cb_pos->list); |
| } |
| mei_io_cb_free(dev->iamthif_current_cb); |
| dev->iamthif_current_cb = NULL; |
| |
| dev->iamthif_file_object->private_data = NULL; |
| dev->iamthif_file_object = NULL; |
| dev->iamthif_timer = 0; |
| mei_amthif_run_next_cmd(dev); |
| |
| } |
| } |
| out: |
| schedule_delayed_work(&dev->timer_work, 2 * HZ); |
| mutex_unlock(&dev->device_lock); |
| } |
| |