| /* |
| * Jeilinj subdriver |
| * |
| * Supports some Jeilin dual-mode cameras which use bulk transport and |
| * download raw JPEG data. |
| * |
| * Copyright (C) 2009 Theodore Kilgore |
| * |
| * Sportscam DV15 support and control settings are |
| * Copyright (C) 2011 Patrice Chotard |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define MODULE_NAME "jeilinj" |
| |
| #include <linux/slab.h> |
| #include "gspca.h" |
| #include "jpeg.h" |
| |
| MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>"); |
| MODULE_DESCRIPTION("GSPCA/JEILINJ USB Camera Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* Default timeouts, in ms */ |
| #define JEILINJ_CMD_TIMEOUT 500 |
| #define JEILINJ_CMD_DELAY 160 |
| #define JEILINJ_DATA_TIMEOUT 1000 |
| |
| /* Maximum transfer size to use. */ |
| #define JEILINJ_MAX_TRANSFER 0x200 |
| #define FRAME_HEADER_LEN 0x10 |
| #define FRAME_START 0xFFFFFFFF |
| |
| enum { |
| SAKAR_57379, |
| SPORTSCAM_DV15, |
| }; |
| |
| #define CAMQUALITY_MIN 0 /* highest cam quality */ |
| #define CAMQUALITY_MAX 97 /* lowest cam quality */ |
| |
| /* Structure to hold all of our device specific stuff */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| int blocks_left; |
| const struct v4l2_pix_format *cap_mode; |
| struct v4l2_ctrl *freq; |
| struct v4l2_ctrl *jpegqual; |
| /* Driver stuff */ |
| u8 type; |
| u8 quality; /* image quality */ |
| #define QUALITY_MIN 35 |
| #define QUALITY_MAX 85 |
| #define QUALITY_DEF 85 |
| u8 jpeg_hdr[JPEG_HDR_SZ]; |
| }; |
| |
| struct jlj_command { |
| unsigned char instruction[2]; |
| unsigned char ack_wanted; |
| unsigned char delay; |
| }; |
| |
| /* AFAICT these cameras will only do 320x240. */ |
| static struct v4l2_pix_format jlj_mode[] = { |
| { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .priv = 0}, |
| { 640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, |
| .bytesperline = 640, |
| .sizeimage = 640 * 480, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .priv = 0} |
| }; |
| |
| /* |
| * cam uses endpoint 0x03 to send commands, 0x84 for read commands, |
| * and 0x82 for bulk transfer. |
| */ |
| |
| /* All commands are two bytes only */ |
| static void jlj_write2(struct gspca_dev *gspca_dev, unsigned char *command) |
| { |
| int retval; |
| |
| if (gspca_dev->usb_err < 0) |
| return; |
| memcpy(gspca_dev->usb_buf, command, 2); |
| retval = usb_bulk_msg(gspca_dev->dev, |
| usb_sndbulkpipe(gspca_dev->dev, 3), |
| gspca_dev->usb_buf, 2, NULL, 500); |
| if (retval < 0) { |
| pr_err("command write [%02x] error %d\n", |
| gspca_dev->usb_buf[0], retval); |
| gspca_dev->usb_err = retval; |
| } |
| } |
| |
| /* Responses are one byte only */ |
| static void jlj_read1(struct gspca_dev *gspca_dev, unsigned char *response) |
| { |
| int retval; |
| |
| if (gspca_dev->usb_err < 0) |
| return; |
| retval = usb_bulk_msg(gspca_dev->dev, |
| usb_rcvbulkpipe(gspca_dev->dev, 0x84), |
| gspca_dev->usb_buf, 1, NULL, 500); |
| *response = gspca_dev->usb_buf[0]; |
| if (retval < 0) { |
| pr_err("read command [%02x] error %d\n", |
| gspca_dev->usb_buf[0], retval); |
| gspca_dev->usb_err = retval; |
| } |
| } |
| |
| static void setfreq(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 freq_commands[][2] = { |
| {0x71, 0x80}, |
| {0x70, 0x07} |
| }; |
| |
| freq_commands[0][1] |= val >> 1; |
| |
| jlj_write2(gspca_dev, freq_commands[0]); |
| jlj_write2(gspca_dev, freq_commands[1]); |
| } |
| |
| static void setcamquality(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 quality_commands[][2] = { |
| {0x71, 0x1E}, |
| {0x70, 0x06} |
| }; |
| u8 camquality; |
| |
| /* adapt camera quality from jpeg quality */ |
| camquality = ((QUALITY_MAX - val) * CAMQUALITY_MAX) |
| / (QUALITY_MAX - QUALITY_MIN); |
| quality_commands[0][1] += camquality; |
| |
| jlj_write2(gspca_dev, quality_commands[0]); |
| jlj_write2(gspca_dev, quality_commands[1]); |
| } |
| |
| static void setautogain(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 autogain_commands[][2] = { |
| {0x94, 0x02}, |
| {0xcf, 0x00} |
| }; |
| |
| autogain_commands[1][1] = val << 4; |
| |
| jlj_write2(gspca_dev, autogain_commands[0]); |
| jlj_write2(gspca_dev, autogain_commands[1]); |
| } |
| |
| static void setred(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 setred_commands[][2] = { |
| {0x94, 0x02}, |
| {0xe6, 0x00} |
| }; |
| |
| setred_commands[1][1] = val; |
| |
| jlj_write2(gspca_dev, setred_commands[0]); |
| jlj_write2(gspca_dev, setred_commands[1]); |
| } |
| |
| static void setgreen(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 setgreen_commands[][2] = { |
| {0x94, 0x02}, |
| {0xe7, 0x00} |
| }; |
| |
| setgreen_commands[1][1] = val; |
| |
| jlj_write2(gspca_dev, setgreen_commands[0]); |
| jlj_write2(gspca_dev, setgreen_commands[1]); |
| } |
| |
| static void setblue(struct gspca_dev *gspca_dev, s32 val) |
| { |
| u8 setblue_commands[][2] = { |
| {0x94, 0x02}, |
| {0xe9, 0x00} |
| }; |
| |
| setblue_commands[1][1] = val; |
| |
| jlj_write2(gspca_dev, setblue_commands[0]); |
| jlj_write2(gspca_dev, setblue_commands[1]); |
| } |
| |
| static int jlj_start(struct gspca_dev *gspca_dev) |
| { |
| int i; |
| int start_commands_size; |
| u8 response = 0xff; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct jlj_command start_commands[] = { |
| {{0x71, 0x81}, 0, 0}, |
| {{0x70, 0x05}, 0, JEILINJ_CMD_DELAY}, |
| {{0x95, 0x70}, 1, 0}, |
| {{0x71, 0x81 - gspca_dev->curr_mode}, 0, 0}, |
| {{0x70, 0x04}, 0, JEILINJ_CMD_DELAY}, |
| {{0x95, 0x70}, 1, 0}, |
| {{0x71, 0x00}, 0, 0}, /* start streaming ??*/ |
| {{0x70, 0x08}, 0, JEILINJ_CMD_DELAY}, |
| {{0x95, 0x70}, 1, 0}, |
| #define SPORTSCAM_DV15_CMD_SIZE 9 |
| {{0x94, 0x02}, 0, 0}, |
| {{0xde, 0x24}, 0, 0}, |
| {{0x94, 0x02}, 0, 0}, |
| {{0xdd, 0xf0}, 0, 0}, |
| {{0x94, 0x02}, 0, 0}, |
| {{0xe3, 0x2c}, 0, 0}, |
| {{0x94, 0x02}, 0, 0}, |
| {{0xe4, 0x00}, 0, 0}, |
| {{0x94, 0x02}, 0, 0}, |
| {{0xe5, 0x00}, 0, 0}, |
| {{0x94, 0x02}, 0, 0}, |
| {{0xe6, 0x2c}, 0, 0}, |
| {{0x94, 0x03}, 0, 0}, |
| {{0xaa, 0x00}, 0, 0} |
| }; |
| |
| sd->blocks_left = 0; |
| /* Under Windows, USB spy shows that only the 9 first start |
| * commands are used for SPORTSCAM_DV15 webcam |
| */ |
| if (sd->type == SPORTSCAM_DV15) |
| start_commands_size = SPORTSCAM_DV15_CMD_SIZE; |
| else |
| start_commands_size = ARRAY_SIZE(start_commands); |
| |
| for (i = 0; i < start_commands_size; i++) { |
| jlj_write2(gspca_dev, start_commands[i].instruction); |
| if (start_commands[i].delay) |
| msleep(start_commands[i].delay); |
| if (start_commands[i].ack_wanted) |
| jlj_read1(gspca_dev, &response); |
| } |
| setcamquality(gspca_dev, v4l2_ctrl_g_ctrl(sd->jpegqual)); |
| msleep(2); |
| setfreq(gspca_dev, v4l2_ctrl_g_ctrl(sd->freq)); |
| if (gspca_dev->usb_err < 0) |
| PDEBUG(D_ERR, "Start streaming command failed"); |
| return gspca_dev->usb_err; |
| } |
| |
| static void sd_pkt_scan(struct gspca_dev *gspca_dev, |
| u8 *data, int len) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int packet_type; |
| u32 header_marker; |
| |
| PDEBUG(D_STREAM, "Got %d bytes out of %d for Block 0", |
| len, JEILINJ_MAX_TRANSFER); |
| if (len != JEILINJ_MAX_TRANSFER) { |
| PDEBUG(D_PACK, "bad length"); |
| goto discard; |
| } |
| /* check if it's start of frame */ |
| header_marker = ((u32 *)data)[0]; |
| if (header_marker == FRAME_START) { |
| sd->blocks_left = data[0x0a] - 1; |
| PDEBUG(D_STREAM, "blocks_left = 0x%x", sd->blocks_left); |
| /* Start a new frame, and add the JPEG header, first thing */ |
| gspca_frame_add(gspca_dev, FIRST_PACKET, |
| sd->jpeg_hdr, JPEG_HDR_SZ); |
| /* Toss line 0 of data block 0, keep the rest. */ |
| gspca_frame_add(gspca_dev, INTER_PACKET, |
| data + FRAME_HEADER_LEN, |
| JEILINJ_MAX_TRANSFER - FRAME_HEADER_LEN); |
| } else if (sd->blocks_left > 0) { |
| PDEBUG(D_STREAM, "%d blocks remaining for frame", |
| sd->blocks_left); |
| sd->blocks_left -= 1; |
| if (sd->blocks_left == 0) |
| packet_type = LAST_PACKET; |
| else |
| packet_type = INTER_PACKET; |
| gspca_frame_add(gspca_dev, packet_type, |
| data, JEILINJ_MAX_TRANSFER); |
| } else |
| goto discard; |
| return; |
| discard: |
| /* Discard data until a new frame starts. */ |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| } |
| |
| /* This function is called at probe time just before sd_init */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| struct cam *cam = &gspca_dev->cam; |
| struct sd *dev = (struct sd *) gspca_dev; |
| |
| dev->type = id->driver_info; |
| dev->quality = QUALITY_DEF; |
| |
| cam->cam_mode = jlj_mode; |
| cam->nmodes = ARRAY_SIZE(jlj_mode); |
| cam->bulk = 1; |
| cam->bulk_nurbs = 1; |
| cam->bulk_size = JEILINJ_MAX_TRANSFER; |
| return 0; |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| int i; |
| u8 *buf; |
| static u8 stop_commands[][2] = { |
| {0x71, 0x00}, |
| {0x70, 0x09}, |
| {0x71, 0x80}, |
| {0x70, 0x05} |
| }; |
| |
| for (;;) { |
| /* get the image remaining blocks */ |
| usb_bulk_msg(gspca_dev->dev, |
| gspca_dev->urb[0]->pipe, |
| gspca_dev->urb[0]->transfer_buffer, |
| JEILINJ_MAX_TRANSFER, NULL, |
| JEILINJ_DATA_TIMEOUT); |
| |
| /* search for 0xff 0xd9 (EOF for JPEG) */ |
| i = 0; |
| buf = gspca_dev->urb[0]->transfer_buffer; |
| while ((i < (JEILINJ_MAX_TRANSFER - 1)) && |
| ((buf[i] != 0xff) || (buf[i+1] != 0xd9))) |
| i++; |
| |
| if (i != (JEILINJ_MAX_TRANSFER - 1)) |
| /* last remaining block found */ |
| break; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(stop_commands); i++) |
| jlj_write2(gspca_dev, stop_commands[i]); |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| return gspca_dev->usb_err; |
| } |
| |
| /* Set up for getting frames. */ |
| static int sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct sd *dev = (struct sd *) gspca_dev; |
| |
| /* create the JPEG header */ |
| jpeg_define(dev->jpeg_hdr, gspca_dev->height, gspca_dev->width, |
| 0x21); /* JPEG 422 */ |
| jpeg_set_qual(dev->jpeg_hdr, dev->quality); |
| PDEBUG(D_STREAM, "Start streaming at %dx%d", |
| gspca_dev->height, gspca_dev->width); |
| jlj_start(gspca_dev); |
| return gspca_dev->usb_err; |
| } |
| |
| /* Table of supported USB devices */ |
| static const struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x0979, 0x0280), .driver_info = SAKAR_57379}, |
| {USB_DEVICE(0x0979, 0x0270), .driver_info = SPORTSCAM_DV15}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| static int sd_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gspca_dev *gspca_dev = |
| container_of(ctrl->handler, struct gspca_dev, ctrl_handler); |
| struct sd *sd = (struct sd *)gspca_dev; |
| |
| gspca_dev->usb_err = 0; |
| |
| if (!gspca_dev->streaming) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_POWER_LINE_FREQUENCY: |
| setfreq(gspca_dev, ctrl->val); |
| break; |
| case V4L2_CID_RED_BALANCE: |
| setred(gspca_dev, ctrl->val); |
| break; |
| case V4L2_CID_GAIN: |
| setgreen(gspca_dev, ctrl->val); |
| break; |
| case V4L2_CID_BLUE_BALANCE: |
| setblue(gspca_dev, ctrl->val); |
| break; |
| case V4L2_CID_AUTOGAIN: |
| setautogain(gspca_dev, ctrl->val); |
| break; |
| case V4L2_CID_JPEG_COMPRESSION_QUALITY: |
| jpeg_set_qual(sd->jpeg_hdr, ctrl->val); |
| setcamquality(gspca_dev, ctrl->val); |
| break; |
| } |
| return gspca_dev->usb_err; |
| } |
| |
| static const struct v4l2_ctrl_ops sd_ctrl_ops = { |
| .s_ctrl = sd_s_ctrl, |
| }; |
| |
| static int sd_init_controls(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *)gspca_dev; |
| struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; |
| static const struct v4l2_ctrl_config custom_autogain = { |
| .ops = &sd_ctrl_ops, |
| .id = V4L2_CID_AUTOGAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Automatic Gain (and Exposure)", |
| .max = 3, |
| .step = 1, |
| .def = 0, |
| }; |
| |
| gspca_dev->vdev.ctrl_handler = hdl; |
| v4l2_ctrl_handler_init(hdl, 6); |
| sd->freq = v4l2_ctrl_new_std_menu(hdl, &sd_ctrl_ops, |
| V4L2_CID_POWER_LINE_FREQUENCY, |
| V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 1, |
| V4L2_CID_POWER_LINE_FREQUENCY_60HZ); |
| v4l2_ctrl_new_custom(hdl, &custom_autogain, NULL); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_RED_BALANCE, 0, 3, 1, 2); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_GAIN, 0, 3, 1, 2); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_BLUE_BALANCE, 0, 3, 1, 2); |
| sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_JPEG_COMPRESSION_QUALITY, |
| QUALITY_MIN, QUALITY_MAX, 1, QUALITY_DEF); |
| |
| if (hdl->error) { |
| pr_err("Could not initialize controls\n"); |
| return hdl->error; |
| } |
| return 0; |
| } |
| |
| static int sd_set_jcomp(struct gspca_dev *gspca_dev, |
| const struct v4l2_jpegcompression *jcomp) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| v4l2_ctrl_s_ctrl(sd->jpegqual, jcomp->quality); |
| return 0; |
| } |
| |
| static int sd_get_jcomp(struct gspca_dev *gspca_dev, |
| struct v4l2_jpegcompression *jcomp) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| memset(jcomp, 0, sizeof *jcomp); |
| jcomp->quality = v4l2_ctrl_g_ctrl(sd->jpegqual); |
| jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT |
| | V4L2_JPEG_MARKER_DQT; |
| return 0; |
| } |
| |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc_sakar_57379 = { |
| .name = MODULE_NAME, |
| .config = sd_config, |
| .init = sd_init, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .pkt_scan = sd_pkt_scan, |
| }; |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc_sportscam_dv15 = { |
| .name = MODULE_NAME, |
| .config = sd_config, |
| .init = sd_init, |
| .init_controls = sd_init_controls, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .pkt_scan = sd_pkt_scan, |
| .get_jcomp = sd_get_jcomp, |
| .set_jcomp = sd_set_jcomp, |
| }; |
| |
| static const struct sd_desc *sd_desc[2] = { |
| &sd_desc_sakar_57379, |
| &sd_desc_sportscam_dv15 |
| }; |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, |
| sd_desc[id->driver_info], |
| sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| .reset_resume = gspca_resume, |
| #endif |
| }; |
| |
| module_usb_driver(sd_driver); |