| /* us3_cpufreq.c: UltraSPARC-III cpu frequency support |
| * |
| * Copyright (C) 2003 David S. Miller (davem@redhat.com) |
| * |
| * Many thanks to Dominik Brodowski for fixing up the cpufreq |
| * infrastructure in order to make this driver easier to implement. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/cpufreq.h> |
| #include <linux/threads.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| |
| #include <asm/head.h> |
| #include <asm/timer.h> |
| |
| static struct cpufreq_driver *cpufreq_us3_driver; |
| |
| struct us3_freq_percpu_info { |
| struct cpufreq_frequency_table table[4]; |
| }; |
| |
| /* Indexed by cpu number. */ |
| static struct us3_freq_percpu_info *us3_freq_table; |
| |
| /* UltraSPARC-III has three dividers: 1, 2, and 32. These are controlled |
| * in the Safari config register. |
| */ |
| #define SAFARI_CFG_DIV_1 0x0000000000000000UL |
| #define SAFARI_CFG_DIV_2 0x0000000040000000UL |
| #define SAFARI_CFG_DIV_32 0x0000000080000000UL |
| #define SAFARI_CFG_DIV_MASK 0x00000000C0000000UL |
| |
| static unsigned long read_safari_cfg(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("ldxa [%%g0] %1, %0" |
| : "=&r" (ret) |
| : "i" (ASI_SAFARI_CONFIG)); |
| return ret; |
| } |
| |
| static void write_safari_cfg(unsigned long val) |
| { |
| __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "i" (ASI_SAFARI_CONFIG) |
| : "memory"); |
| } |
| |
| static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg) |
| { |
| unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; |
| unsigned long ret; |
| |
| switch (safari_cfg & SAFARI_CFG_DIV_MASK) { |
| case SAFARI_CFG_DIV_1: |
| ret = clock_tick / 1; |
| break; |
| case SAFARI_CFG_DIV_2: |
| ret = clock_tick / 2; |
| break; |
| case SAFARI_CFG_DIV_32: |
| ret = clock_tick / 32; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int us3_freq_get(unsigned int cpu) |
| { |
| cpumask_t cpus_allowed; |
| unsigned long reg; |
| unsigned int ret; |
| |
| if (!cpu_online(cpu)) |
| return 0; |
| |
| cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); |
| set_cpus_allowed_ptr(current, cpumask_of(cpu)); |
| |
| reg = read_safari_cfg(); |
| ret = get_current_freq(cpu, reg); |
| |
| set_cpus_allowed_ptr(current, &cpus_allowed); |
| |
| return ret; |
| } |
| |
| static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) |
| { |
| unsigned long new_bits, new_freq, reg; |
| cpumask_t cpus_allowed; |
| struct cpufreq_freqs freqs; |
| |
| if (!cpu_online(cpu)) |
| return; |
| |
| cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); |
| set_cpus_allowed_ptr(current, cpumask_of(cpu)); |
| |
| new_freq = sparc64_get_clock_tick(cpu) / 1000; |
| switch (index) { |
| case 0: |
| new_bits = SAFARI_CFG_DIV_1; |
| new_freq /= 1; |
| break; |
| case 1: |
| new_bits = SAFARI_CFG_DIV_2; |
| new_freq /= 2; |
| break; |
| case 2: |
| new_bits = SAFARI_CFG_DIV_32; |
| new_freq /= 32; |
| break; |
| |
| default: |
| BUG(); |
| } |
| |
| reg = read_safari_cfg(); |
| |
| freqs.old = get_current_freq(cpu, reg); |
| freqs.new = new_freq; |
| freqs.cpu = cpu; |
| cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); |
| |
| reg &= ~SAFARI_CFG_DIV_MASK; |
| reg |= new_bits; |
| write_safari_cfg(reg); |
| |
| cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); |
| |
| set_cpus_allowed_ptr(current, &cpus_allowed); |
| } |
| |
| static int us3_freq_target(struct cpufreq_policy *policy, |
| unsigned int target_freq, |
| unsigned int relation) |
| { |
| unsigned int new_index = 0; |
| |
| if (cpufreq_frequency_table_target(policy, |
| &us3_freq_table[policy->cpu].table[0], |
| target_freq, |
| relation, |
| &new_index)) |
| return -EINVAL; |
| |
| us3_set_cpu_divider_index(policy->cpu, new_index); |
| |
| return 0; |
| } |
| |
| static int us3_freq_verify(struct cpufreq_policy *policy) |
| { |
| return cpufreq_frequency_table_verify(policy, |
| &us3_freq_table[policy->cpu].table[0]); |
| } |
| |
| static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) |
| { |
| unsigned int cpu = policy->cpu; |
| unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; |
| struct cpufreq_frequency_table *table = |
| &us3_freq_table[cpu].table[0]; |
| |
| table[0].index = 0; |
| table[0].frequency = clock_tick / 1; |
| table[1].index = 1; |
| table[1].frequency = clock_tick / 2; |
| table[2].index = 2; |
| table[2].frequency = clock_tick / 32; |
| table[3].index = 0; |
| table[3].frequency = CPUFREQ_TABLE_END; |
| |
| policy->cpuinfo.transition_latency = 0; |
| policy->cur = clock_tick; |
| |
| return cpufreq_frequency_table_cpuinfo(policy, table); |
| } |
| |
| static int us3_freq_cpu_exit(struct cpufreq_policy *policy) |
| { |
| if (cpufreq_us3_driver) |
| us3_set_cpu_divider_index(policy->cpu, 0); |
| |
| return 0; |
| } |
| |
| static int __init us3_freq_init(void) |
| { |
| unsigned long manuf, impl, ver; |
| int ret; |
| |
| if (tlb_type != cheetah && tlb_type != cheetah_plus) |
| return -ENODEV; |
| |
| __asm__("rdpr %%ver, %0" : "=r" (ver)); |
| manuf = ((ver >> 48) & 0xffff); |
| impl = ((ver >> 32) & 0xffff); |
| |
| if (manuf == CHEETAH_MANUF && |
| (impl == CHEETAH_IMPL || |
| impl == CHEETAH_PLUS_IMPL || |
| impl == JAGUAR_IMPL || |
| impl == PANTHER_IMPL)) { |
| struct cpufreq_driver *driver; |
| |
| ret = -ENOMEM; |
| driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); |
| if (!driver) |
| goto err_out; |
| |
| us3_freq_table = kzalloc( |
| (NR_CPUS * sizeof(struct us3_freq_percpu_info)), |
| GFP_KERNEL); |
| if (!us3_freq_table) |
| goto err_out; |
| |
| driver->init = us3_freq_cpu_init; |
| driver->verify = us3_freq_verify; |
| driver->target = us3_freq_target; |
| driver->get = us3_freq_get; |
| driver->exit = us3_freq_cpu_exit; |
| driver->owner = THIS_MODULE, |
| strcpy(driver->name, "UltraSPARC-III"); |
| |
| cpufreq_us3_driver = driver; |
| ret = cpufreq_register_driver(driver); |
| if (ret) |
| goto err_out; |
| |
| return 0; |
| |
| err_out: |
| if (driver) { |
| kfree(driver); |
| cpufreq_us3_driver = NULL; |
| } |
| kfree(us3_freq_table); |
| us3_freq_table = NULL; |
| return ret; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static void __exit us3_freq_exit(void) |
| { |
| if (cpufreq_us3_driver) { |
| cpufreq_unregister_driver(cpufreq_us3_driver); |
| kfree(cpufreq_us3_driver); |
| cpufreq_us3_driver = NULL; |
| kfree(us3_freq_table); |
| us3_freq_table = NULL; |
| } |
| } |
| |
| MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); |
| MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(us3_freq_init); |
| module_exit(us3_freq_exit); |