blob: 937c4c50219e1a818c89b32f965598318fbd55cc [file] [log] [blame]
/*
* arch/arm/mach-tegra/include/mach/uncompress.h
*
* Copyright (C) 2010 Google, Inc.
* Copyright (C) 2011 Google, Inc.
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
* Doug Anderson <dianders@chromium.org>
* Stephen Warren <swarren@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_UNCOMPRESS_H
#define __MACH_TEGRA_UNCOMPRESS_H
#include <linux/types.h>
#include <linux/serial_reg.h>
#include <mach/iomap.h>
#include <mach/irammap.h>
#define BIT(x) (1 << (x))
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
#define DEBUG_UART_SHIFT 2
volatile u8 *uart;
static void putc(int c)
{
if (uart == NULL)
return;
while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
barrier();
uart[UART_TX << DEBUG_UART_SHIFT] = c;
}
static inline void flush(void)
{
}
static inline void save_uart_address(void)
{
u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
if (uart) {
buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
buf[1] = (u32)uart;
} else
buf[0] = 0;
}
static const struct {
u32 base;
u32 reset_reg;
u32 clock_reg;
u32 bit;
} uarts[] = {
{
TEGRA_UARTA_BASE,
TEGRA_CLK_RESET_BASE + 0x04,
TEGRA_CLK_RESET_BASE + 0x10,
6,
},
{
TEGRA_UARTB_BASE,
TEGRA_CLK_RESET_BASE + 0x04,
TEGRA_CLK_RESET_BASE + 0x10,
7,
},
{
TEGRA_UARTC_BASE,
TEGRA_CLK_RESET_BASE + 0x08,
TEGRA_CLK_RESET_BASE + 0x14,
23,
},
{
TEGRA_UARTD_BASE,
TEGRA_CLK_RESET_BASE + 0x0c,
TEGRA_CLK_RESET_BASE + 0x18,
1,
},
{
TEGRA_UARTE_BASE,
TEGRA_CLK_RESET_BASE + 0x0c,
TEGRA_CLK_RESET_BASE + 0x18,
2,
},
};
static inline bool uart_clocked(int i)
{
if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
return false;
if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
return false;
return true;
}
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
int auto_odmdata(void)
{
volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
u32 odmdata = pmc[0xa0 / 4];
/*
* Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
* Some boards apparently swap the last two values, but we don't have
* any way of catering for that here, so we just accept either. If this
* doesn't make sense for your board, just don't enable this feature.
*
* Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
*/
switch ((odmdata >> 18) & 3) {
case 2:
case 3:
break;
default:
return -1;
}
return (odmdata >> 15) & 7;
}
#endif
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
int auto_scratch(void)
{
int i;
/*
* Look for the first UART that:
* a) Is not in reset.
* b) Is clocked.
* c) Has a 'D' in the scratchpad register.
*
* Note that on Tegra30, the first two conditions are required, since
* if not true, accesses to the UART scratch register will hang.
* Tegra20 doesn't have this issue.
*
* The intent is that the bootloader will tell the kernel which UART
* to use by setting up those conditions. If nothing found, we'll fall
* back to what's specified in TEGRA_DEBUG_UART_BASE.
*/
for (i = 0; i < ARRAY_SIZE(uarts); i++) {
if (!uart_clocked(i))
continue;
uart = (volatile u8 *)uarts[i].base;
if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
continue;
return i;
}
return -1;
}
#endif
/*
* Setup before decompression. This is where we do UART selection for
* earlyprintk and init the uart_base register.
*/
static inline void arch_decomp_setup(void)
{
int uart_id, auto_uart_id;
volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
u32 chip, div;
#if defined(CONFIG_TEGRA_DEBUG_UARTA)
uart_id = 0;
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
uart_id = 1;
#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
uart_id = 2;
#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
uart_id = 3;
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
uart_id = 4;
#else
uart_id = -1;
#endif
#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
auto_uart_id = auto_odmdata();
#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
auto_uart_id = auto_scratch();
#else
auto_uart_id = -1;
#endif
if (auto_uart_id != -1)
uart_id = auto_uart_id;
if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
!uart_clocked(uart_id))
uart = NULL;
else
uart = (volatile u8 *)uarts[uart_id].base;
save_uart_address();
if (uart == NULL)
return;
chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
if (chip == 0x20)
div = 0x0075;
else
div = 0x00dd;
uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
}
static inline void arch_decomp_wdog(void)
{
}
#endif