| /* |
| * Chip-specific setup code for the AT91SAM9x5 family |
| * |
| * Copyright (C) 2010-2012 Atmel Corporation. |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <mach/at91sam9x5.h> |
| #include <mach/at91_pmc.h> |
| #include <mach/cpu.h> |
| #include <mach/board.h> |
| |
| #include "soc.h" |
| #include "generic.h" |
| #include "clock.h" |
| #include "sam9_smc.h" |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk pioAB_clk = { |
| .name = "pioAB_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioCD_clk = { |
| .name = "pioCD_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk smd_clk = { |
| .name = "smd_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_SMD, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_USART0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_USART1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_USART2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* USART3 clock - Only for sam9g25/sam9x25 */ |
| static struct clk usart3_clk = { |
| .name = "usart3_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_USART3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi0_clk = { |
| .name = "twi0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_TWI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi1_clk = { |
| .name = "twi1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_TWI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi2_clk = { |
| .name = "twi2_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_TWI2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc0_clk = { |
| .name = "mci0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_MCI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi0_clk = { |
| .name = "spi0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_SPI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi1_clk = { |
| .name = "spi1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_SPI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk uart0_clk = { |
| .name = "uart0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_UART0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk uart1_clk = { |
| .name = "uart1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_UART1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tcb0_clk = { |
| .name = "tcb0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_TCB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pwm_clk = { |
| .name = "pwm_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_PWM, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk adc_clk = { |
| .name = "adc_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_ADC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk adc_op_clk = { |
| .name = "adc_op_clk", |
| .type = CLK_TYPE_PERIPHERAL, |
| .rate_hz = 5000000, |
| }; |
| static struct clk dma0_clk = { |
| .name = "dma0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_DMA0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk dma1_clk = { |
| .name = "dma1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_DMA1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk uhphs_clk = { |
| .name = "uhphs", |
| .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk udphs_clk = { |
| .name = "udphs_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */ |
| static struct clk macb0_clk = { |
| .name = "pclk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* lcd clock - Only for sam9g15/sam9g35/sam9x35 */ |
| static struct clk lcdc_clk = { |
| .name = "lcdc_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_LCDC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* isi clock - Only for sam9g25 */ |
| static struct clk isi_clk = { |
| .name = "isi_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_ISI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc1_clk = { |
| .name = "mci1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_MCI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* emac1 clock - Only for sam9x25 */ |
| static struct clk macb1_clk = { |
| .name = "pclk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc_clk = { |
| .name = "ssc_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_SSC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* can0 clock - Only for sam9x35 */ |
| static struct clk can0_clk = { |
| .name = "can0_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_CAN0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| /* can1 clock - Only for sam9x35 */ |
| static struct clk can1_clk = { |
| .name = "can1_clk", |
| .pmc_mask = 1 << AT91SAM9X5_ID_CAN1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioAB_clk, |
| &pioCD_clk, |
| &smd_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &twi0_clk, |
| &twi1_clk, |
| &twi2_clk, |
| &mmc0_clk, |
| &spi0_clk, |
| &spi1_clk, |
| &uart0_clk, |
| &uart1_clk, |
| &tcb0_clk, |
| &pwm_clk, |
| &adc_clk, |
| &adc_op_clk, |
| &dma0_clk, |
| &dma1_clk, |
| &uhphs_clk, |
| &udphs_clk, |
| &mmc1_clk, |
| &ssc_clk, |
| // irq0 |
| }; |
| |
| static struct clk_lookup periph_clocks_lookups[] = { |
| /* lookup table for DT entries */ |
| CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), |
| CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), |
| CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), |
| CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), |
| CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), |
| CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), |
| CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), |
| CLKDEV_CON_ID("pioA", &pioAB_clk), |
| CLKDEV_CON_ID("pioB", &pioAB_clk), |
| CLKDEV_CON_ID("pioC", &pioCD_clk), |
| CLKDEV_CON_ID("pioD", &pioCD_clk), |
| /* additional fake clock for macb_hclk */ |
| CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), |
| CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), |
| CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), |
| CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), |
| CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), |
| }; |
| |
| /* |
| * The two programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| |
| static void __init at91sam9x5_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clkdev_add_table(periph_clocks_lookups, |
| ARRAY_SIZE(periph_clocks_lookups)); |
| |
| if (cpu_is_at91sam9g25() |
| || cpu_is_at91sam9x25()) |
| clk_register(&usart3_clk); |
| |
| if (cpu_is_at91sam9g25() |
| || cpu_is_at91sam9x25() |
| || cpu_is_at91sam9g35() |
| || cpu_is_at91sam9x35()) |
| clk_register(&macb0_clk); |
| |
| if (cpu_is_at91sam9g15() |
| || cpu_is_at91sam9g35() |
| || cpu_is_at91sam9x35()) |
| clk_register(&lcdc_clk); |
| |
| if (cpu_is_at91sam9g25()) |
| clk_register(&isi_clk); |
| |
| if (cpu_is_at91sam9x25()) |
| clk_register(&macb1_clk); |
| |
| if (cpu_is_at91sam9x25() |
| || cpu_is_at91sam9x35()) { |
| clk_register(&can0_clk); |
| clk_register(&can1_clk); |
| } |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * AT91SAM9x5 processor initialization |
| * -------------------------------------------------------------------- */ |
| |
| static void __init at91sam9x5_map_io(void) |
| { |
| at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); |
| } |
| |
| void __init at91sam9x5_initialize(void) |
| { |
| at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); |
| |
| /* Register GPIO subsystem (using DT) */ |
| at91_gpio_init(NULL, 0); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller (FIQ) */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A and B */ |
| 1, /* Parallel IO Controller C and D */ |
| 4, /* Soft Modem */ |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 5, /* USART 3 */ |
| 6, /* Two-Wire Interface 0 */ |
| 6, /* Two-Wire Interface 1 */ |
| 6, /* Two-Wire Interface 2 */ |
| 0, /* Multimedia Card Interface 0 */ |
| 5, /* Serial Peripheral Interface 0 */ |
| 5, /* Serial Peripheral Interface 1 */ |
| 5, /* UART 0 */ |
| 5, /* UART 1 */ |
| 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ |
| 0, /* Pulse Width Modulation Controller */ |
| 0, /* ADC Controller */ |
| 0, /* DMA Controller 0 */ |
| 0, /* DMA Controller 1 */ |
| 2, /* USB Host High Speed port */ |
| 2, /* USB Device High speed port */ |
| 3, /* Ethernet MAC 0 */ |
| 3, /* LDC Controller or Image Sensor Interface */ |
| 0, /* Multimedia Card Interface 1 */ |
| 3, /* Ethernet MAC 1 */ |
| 4, /* Synchronous Serial Interface */ |
| 4, /* CAN Controller 0 */ |
| 4, /* CAN Controller 1 */ |
| 0, /* Advanced Interrupt Controller (IRQ0) */ |
| }; |
| |
| struct at91_init_soc __initdata at91sam9x5_soc = { |
| .map_io = at91sam9x5_map_io, |
| .default_irq_priority = at91sam9x5_default_irq_priority, |
| .register_clocks = at91sam9x5_register_clocks, |
| .init = at91sam9x5_initialize, |
| }; |