| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/export.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| |
| #include <lantiq_soc.h> |
| |
| /* |
| * By attaching hardware latches to the EBU it is possible to create output |
| * only gpios. This driver configures a special memory address, which when |
| * written to outputs 16 bit to the latches. |
| */ |
| |
| #define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ |
| #define LTQ_EBU_WP 0x80000000 /* write protect bit */ |
| |
| /* we keep a shadow value of the last value written to the ebu */ |
| static int ltq_ebu_gpio_shadow = 0x0; |
| static void __iomem *ltq_ebu_gpio_membase; |
| |
| static void ltq_ebu_apply(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ebu_lock, flags); |
| ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); |
| *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; |
| ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); |
| spin_unlock_irqrestore(&ebu_lock, flags); |
| } |
| |
| static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| if (value) |
| ltq_ebu_gpio_shadow |= (1 << offset); |
| else |
| ltq_ebu_gpio_shadow &= ~(1 << offset); |
| ltq_ebu_apply(); |
| } |
| |
| static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| ltq_ebu_set(chip, offset, value); |
| |
| return 0; |
| } |
| |
| static struct gpio_chip ltq_ebu_chip = { |
| .label = "ltq_ebu", |
| .direction_output = ltq_ebu_direction_output, |
| .set = ltq_ebu_set, |
| .base = 72, |
| .ngpio = 16, |
| .can_sleep = 1, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ltq_ebu_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| if (!res) { |
| dev_err(&pdev->dev, "failed to get memory resource\n"); |
| return -ENOENT; |
| } |
| |
| res = devm_request_mem_region(&pdev->dev, res->start, |
| resource_size(res), dev_name(&pdev->dev)); |
| if (!res) { |
| dev_err(&pdev->dev, "failed to request memory resource\n"); |
| return -EBUSY; |
| } |
| |
| ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!ltq_ebu_gpio_membase) { |
| dev_err(&pdev->dev, "Failed to ioremap mem region\n"); |
| return -ENOMEM; |
| } |
| |
| /* grab the default shadow value passed form the platform code */ |
| ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; |
| |
| /* tell the ebu controller which memory address we will be using */ |
| ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); |
| |
| /* write protect the region */ |
| ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); |
| |
| ret = gpiochip_add(<q_ebu_chip); |
| if (!ret) |
| ltq_ebu_apply(); |
| return ret; |
| } |
| |
| static struct platform_driver ltq_ebu_driver = { |
| .probe = ltq_ebu_probe, |
| .driver = { |
| .name = "ltq_ebu", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init ltq_ebu_init(void) |
| { |
| int ret = platform_driver_register(<q_ebu_driver); |
| |
| if (ret) |
| pr_info("ltq_ebu : Error registering platfom driver!"); |
| return ret; |
| } |
| |
| postcore_initcall(ltq_ebu_init); |