| /* |
| Winbond w9966cf Webcam parport driver. |
| |
| Version 0.33 |
| |
| Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| /* |
| Supported devices: |
| *Lifeview FlyCam Supra (using the Philips saa7111a chip) |
| |
| Does any other model using the w9966 interface chip exist ? |
| |
| Todo: |
| |
| *Add a working EPP mode, since DMA ECP read isn't implemented |
| in the parport drivers. (That's why it's so sloow) |
| |
| *Add support for other ccd-control chips than the saa7111 |
| please send me feedback on what kind of chips you have. |
| |
| *Add proper probing. I don't know what's wrong with the IEEE1284 |
| parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID) |
| and nibble read seems to be broken for some peripherals. |
| |
| *Add probing for onboard SRAM, port directions etc. (if possible) |
| |
| *Add support for the hardware compressed modes (maybe using v4l2) |
| |
| *Fix better support for the capture window (no skewed images, v4l |
| interface to capt. window) |
| |
| *Probably some bugs that I don't know of |
| |
| Please support me by sending feedback! |
| |
| Changes: |
| |
| Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE |
| and owner support for newer module locks |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <linux/slab.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-device.h> |
| #include <linux/parport.h> |
| |
| /*#define DEBUG*/ /* Undef me for production */ |
| |
| #ifdef DEBUG |
| #define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a) |
| #else |
| #define DPRINTF(x...) |
| #endif |
| |
| /* |
| * Defines, simple typedefs etc. |
| */ |
| |
| #define W9966_DRIVERNAME "W9966CF Webcam" |
| #define W9966_MAXCAMS 4 /* Maximum number of cameras */ |
| #define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */ |
| #define W9966_SRAMSIZE 131072 /* 128kb */ |
| #define W9966_SRAMID 0x02 /* check w9966cf.pdf */ |
| |
| /* Empirically determined window limits */ |
| #define W9966_WND_MIN_X 16 |
| #define W9966_WND_MIN_Y 14 |
| #define W9966_WND_MAX_X 705 |
| #define W9966_WND_MAX_Y 253 |
| #define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X) |
| #define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y) |
| |
| /* Keep track of our current state */ |
| #define W9966_STATE_PDEV 0x01 |
| #define W9966_STATE_CLAIMED 0x02 |
| #define W9966_STATE_VDEV 0x04 |
| |
| #define W9966_I2C_W_ID 0x48 |
| #define W9966_I2C_R_ID 0x49 |
| #define W9966_I2C_R_DATA 0x08 |
| #define W9966_I2C_R_CLOCK 0x04 |
| #define W9966_I2C_W_DATA 0x02 |
| #define W9966_I2C_W_CLOCK 0x01 |
| |
| struct w9966 { |
| struct v4l2_device v4l2_dev; |
| unsigned char dev_state; |
| unsigned char i2c_state; |
| unsigned short ppmode; |
| struct parport *pport; |
| struct pardevice *pdev; |
| struct video_device vdev; |
| unsigned short width; |
| unsigned short height; |
| unsigned char brightness; |
| signed char contrast; |
| signed char color; |
| signed char hue; |
| struct mutex lock; |
| }; |
| |
| /* |
| * Module specific properties |
| */ |
| |
| MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>"); |
| MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.33.1"); |
| |
| #ifdef MODULE |
| static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; |
| #else |
| static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; |
| #endif |
| module_param_array(pardev, charp, NULL, 0); |
| MODULE_PARM_DESC(pardev, "pardev: where to search for\n" |
| "\teach camera. 'aggressive' means brute-force search.\n" |
| "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n" |
| "\tcam 1 to parport3 and search every parport for cam 2 etc..."); |
| |
| static int parmode; |
| module_param(parmode, int, 0); |
| MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp"); |
| |
| static int video_nr = -1; |
| module_param(video_nr, int, 0); |
| |
| static struct w9966 w9966_cams[W9966_MAXCAMS]; |
| |
| /* |
| * Private function defines |
| */ |
| |
| |
| /* Set camera phase flags, so we know what to uninit when terminating */ |
| static inline void w9966_set_state(struct w9966 *cam, int mask, int val) |
| { |
| cam->dev_state = (cam->dev_state & ~mask) ^ val; |
| } |
| |
| /* Get camera phase flags */ |
| static inline int w9966_get_state(struct w9966 *cam, int mask, int val) |
| { |
| return ((cam->dev_state & mask) == val); |
| } |
| |
| /* Claim parport for ourself */ |
| static void w9966_pdev_claim(struct w9966 *cam) |
| { |
| if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED)) |
| return; |
| parport_claim_or_block(cam->pdev); |
| w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED); |
| } |
| |
| /* Release parport for others to use */ |
| static void w9966_pdev_release(struct w9966 *cam) |
| { |
| if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0)) |
| return; |
| parport_release(cam->pdev); |
| w9966_set_state(cam, W9966_STATE_CLAIMED, 0); |
| } |
| |
| /* Read register from W9966 interface-chip |
| Expects a claimed pdev |
| -1 on error, else register data (byte) */ |
| static int w9966_read_reg(struct w9966 *cam, int reg) |
| { |
| /* ECP, read, regtransfer, REG, REG, REG, REG, REG */ |
| const unsigned char addr = 0x80 | (reg & 0x1f); |
| unsigned char val; |
| |
| if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) |
| return -1; |
| if (parport_write(cam->pport, &addr, 1) != 1) |
| return -1; |
| if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) |
| return -1; |
| if (parport_read(cam->pport, &val, 1) != 1) |
| return -1; |
| |
| return val; |
| } |
| |
| /* Write register to W9966 interface-chip |
| Expects a claimed pdev |
| -1 on error */ |
| static int w9966_write_reg(struct w9966 *cam, int reg, int data) |
| { |
| /* ECP, write, regtransfer, REG, REG, REG, REG, REG */ |
| const unsigned char addr = 0xc0 | (reg & 0x1f); |
| const unsigned char val = data; |
| |
| if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) |
| return -1; |
| if (parport_write(cam->pport, &addr, 1) != 1) |
| return -1; |
| if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) |
| return -1; |
| if (parport_write(cam->pport, &val, 1) != 1) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * Ugly and primitive i2c protocol functions |
| */ |
| |
| /* Sets the data line on the i2c bus. |
| Expects a claimed pdev. */ |
| static void w9966_i2c_setsda(struct w9966 *cam, int state) |
| { |
| if (state) |
| cam->i2c_state |= W9966_I2C_W_DATA; |
| else |
| cam->i2c_state &= ~W9966_I2C_W_DATA; |
| |
| w9966_write_reg(cam, 0x18, cam->i2c_state); |
| udelay(5); |
| } |
| |
| /* Get peripheral clock line |
| Expects a claimed pdev. */ |
| static int w9966_i2c_getscl(struct w9966 *cam) |
| { |
| const unsigned char state = w9966_read_reg(cam, 0x18); |
| return ((state & W9966_I2C_R_CLOCK) > 0); |
| } |
| |
| /* Sets the clock line on the i2c bus. |
| Expects a claimed pdev. -1 on error */ |
| static int w9966_i2c_setscl(struct w9966 *cam, int state) |
| { |
| unsigned long timeout; |
| |
| if (state) |
| cam->i2c_state |= W9966_I2C_W_CLOCK; |
| else |
| cam->i2c_state &= ~W9966_I2C_W_CLOCK; |
| |
| w9966_write_reg(cam, 0x18, cam->i2c_state); |
| udelay(5); |
| |
| /* we go to high, we also expect the peripheral to ack. */ |
| if (state) { |
| timeout = jiffies + 100; |
| while (!w9966_i2c_getscl(cam)) { |
| if (time_after(jiffies, timeout)) |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| #if 0 |
| /* Get peripheral data line |
| Expects a claimed pdev. */ |
| static int w9966_i2c_getsda(struct w9966 *cam) |
| { |
| const unsigned char state = w9966_read_reg(cam, 0x18); |
| return ((state & W9966_I2C_R_DATA) > 0); |
| } |
| #endif |
| |
| /* Write a byte with ack to the i2c bus. |
| Expects a claimed pdev. -1 on error */ |
| static int w9966_i2c_wbyte(struct w9966 *cam, int data) |
| { |
| int i; |
| |
| for (i = 7; i >= 0; i--) { |
| w9966_i2c_setsda(cam, (data >> i) & 0x01); |
| |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| w9966_i2c_setscl(cam, 0); |
| } |
| |
| w9966_i2c_setsda(cam, 1); |
| |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| w9966_i2c_setscl(cam, 0); |
| |
| return 0; |
| } |
| |
| /* Read a data byte with ack from the i2c-bus |
| Expects a claimed pdev. -1 on error */ |
| #if 0 |
| static int w9966_i2c_rbyte(struct w9966 *cam) |
| { |
| unsigned char data = 0x00; |
| int i; |
| |
| w9966_i2c_setsda(cam, 1); |
| |
| for (i = 0; i < 8; i++) { |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| data = data << 1; |
| if (w9966_i2c_getsda(cam)) |
| data |= 0x01; |
| |
| w9966_i2c_setscl(cam, 0); |
| } |
| return data; |
| } |
| #endif |
| |
| /* Read a register from the i2c device. |
| Expects claimed pdev. -1 on error */ |
| #if 0 |
| static int w9966_read_reg_i2c(struct w9966 *cam, int reg) |
| { |
| int data; |
| |
| w9966_i2c_setsda(cam, 0); |
| w9966_i2c_setscl(cam, 0); |
| |
| if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || |
| w9966_i2c_wbyte(cam, reg) == -1) |
| return -1; |
| |
| w9966_i2c_setsda(cam, 1); |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| w9966_i2c_setsda(cam, 0); |
| w9966_i2c_setscl(cam, 0); |
| |
| if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1) |
| return -1; |
| data = w9966_i2c_rbyte(cam); |
| if (data == -1) |
| return -1; |
| |
| w9966_i2c_setsda(cam, 0); |
| |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| w9966_i2c_setsda(cam, 1); |
| |
| return data; |
| } |
| #endif |
| |
| /* Write a register to the i2c device. |
| Expects claimed pdev. -1 on error */ |
| static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data) |
| { |
| w9966_i2c_setsda(cam, 0); |
| w9966_i2c_setscl(cam, 0); |
| |
| if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || |
| w9966_i2c_wbyte(cam, reg) == -1 || |
| w9966_i2c_wbyte(cam, data) == -1) |
| return -1; |
| |
| w9966_i2c_setsda(cam, 0); |
| if (w9966_i2c_setscl(cam, 1) == -1) |
| return -1; |
| |
| w9966_i2c_setsda(cam, 1); |
| |
| return 0; |
| } |
| |
| /* Find a good length for capture window (used both for W and H) |
| A bit ugly but pretty functional. The capture length |
| have to match the downscale */ |
| static int w9966_findlen(int near, int size, int maxlen) |
| { |
| int bestlen = size; |
| int besterr = abs(near - bestlen); |
| int len; |
| |
| for (len = size + 1; len < maxlen; len++) { |
| int err; |
| if (((64 * size) % len) != 0) |
| continue; |
| |
| err = abs(near - len); |
| |
| /* Only continue as long as we keep getting better values */ |
| if (err > besterr) |
| break; |
| |
| besterr = err; |
| bestlen = len; |
| } |
| |
| return bestlen; |
| } |
| |
| /* Modify capture window (if necessary) |
| and calculate downscaling |
| Return -1 on error */ |
| static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor) |
| { |
| int maxlen = max - min; |
| int len = *end - *beg + 1; |
| int newlen = w9966_findlen(len, size, maxlen); |
| int err = newlen - len; |
| |
| /* Check for bad format */ |
| if (newlen > maxlen || newlen < size) |
| return -1; |
| |
| /* Set factor (6 bit fixed) */ |
| *factor = (64 * size) / newlen; |
| if (*factor == 64) |
| *factor = 0x00; /* downscale is disabled */ |
| else |
| *factor |= 0x80; /* set downscale-enable bit */ |
| |
| /* Modify old beginning and end */ |
| *beg -= err / 2; |
| *end += err - (err / 2); |
| |
| /* Move window if outside borders */ |
| if (*beg < min) { |
| *end += min - *beg; |
| *beg += min - *beg; |
| } |
| if (*end > max) { |
| *beg -= *end - max; |
| *end -= *end - max; |
| } |
| |
| return 0; |
| } |
| |
| /* Setup the cameras capture window etc. |
| Expects a claimed pdev |
| return -1 on error */ |
| static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h) |
| { |
| unsigned int i; |
| unsigned int enh_s, enh_e; |
| unsigned char scale_x, scale_y; |
| unsigned char regs[0x1c]; |
| unsigned char saa7111_regs[] = { |
| 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00, |
| 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00, |
| 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0 |
| }; |
| |
| |
| if (w * h * 2 > W9966_SRAMSIZE) { |
| DPRINTF("capture window exceeds SRAM size!.\n"); |
| w = 200; h = 160; /* Pick default values */ |
| } |
| |
| w &= ~0x1; |
| if (w < 2) |
| w = 2; |
| if (h < 1) |
| h = 1; |
| if (w > W9966_WND_MAX_W) |
| w = W9966_WND_MAX_W; |
| if (h > W9966_WND_MAX_H) |
| h = W9966_WND_MAX_H; |
| |
| cam->width = w; |
| cam->height = h; |
| |
| enh_s = 0; |
| enh_e = w * h * 2; |
| |
| /* Modify capture window if necessary and calculate downscaling */ |
| if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 || |
| w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0) |
| return -1; |
| |
| DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n", |
| w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80); |
| |
| /* Setup registers */ |
| regs[0x00] = 0x00; /* Set normal operation */ |
| regs[0x01] = 0x18; /* Capture mode */ |
| regs[0x02] = scale_y; /* V-scaling */ |
| regs[0x03] = scale_x; /* H-scaling */ |
| |
| /* Capture window */ |
| regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */ |
| regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */ |
| regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */ |
| regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */ |
| regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */ |
| regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */ |
| regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */ |
| |
| regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */ |
| |
| /* Enhancement layer */ |
| regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */ |
| regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */ |
| regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */ |
| regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */ |
| regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */ |
| regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */ |
| |
| /* Misc */ |
| regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */ |
| regs[0x17] = 0x00; /* ??? */ |
| regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */ |
| regs[0x19] = 0xff; /* I/O port direction control */ |
| regs[0x1a] = 0xff; /* I/O port data register */ |
| regs[0x1b] = 0x10; /* ??? */ |
| |
| /* SAA7111 chip settings */ |
| saa7111_regs[0x0a] = cam->brightness; |
| saa7111_regs[0x0b] = cam->contrast; |
| saa7111_regs[0x0c] = cam->color; |
| saa7111_regs[0x0d] = cam->hue; |
| |
| /* Reset (ECP-fifo & serial-bus) */ |
| if (w9966_write_reg(cam, 0x00, 0x03) == -1) |
| return -1; |
| |
| /* Write regs to w9966cf chip */ |
| for (i = 0; i < 0x1c; i++) |
| if (w9966_write_reg(cam, i, regs[i]) == -1) |
| return -1; |
| |
| /* Write regs to saa7111 chip */ |
| for (i = 0; i < 0x20; i++) |
| if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * Video4linux interfacing |
| */ |
| |
| static int cam_querycap(struct file *file, void *priv, |
| struct v4l2_capability *vcap) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| |
| strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver)); |
| strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card)); |
| strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); |
| vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; |
| return 0; |
| } |
| |
| static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) |
| { |
| if (vin->index > 0) |
| return -EINVAL; |
| strlcpy(vin->name, "Camera", sizeof(vin->name)); |
| vin->type = V4L2_INPUT_TYPE_CAMERA; |
| vin->audioset = 0; |
| vin->tuner = 0; |
| vin->std = 0; |
| vin->status = 0; |
| return 0; |
| } |
| |
| static int cam_g_input(struct file *file, void *fh, unsigned int *inp) |
| { |
| *inp = 0; |
| return 0; |
| } |
| |
| static int cam_s_input(struct file *file, void *fh, unsigned int inp) |
| { |
| return (inp > 0) ? -EINVAL : 0; |
| } |
| |
| static int cam_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| switch (qc->id) { |
| case V4L2_CID_BRIGHTNESS: |
| return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); |
| case V4L2_CID_CONTRAST: |
| return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64); |
| case V4L2_CID_SATURATION: |
| return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64); |
| case V4L2_CID_HUE: |
| return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); |
| } |
| return -EINVAL; |
| } |
| |
| static int cam_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| ctrl->value = cam->brightness; |
| break; |
| case V4L2_CID_CONTRAST: |
| ctrl->value = cam->contrast; |
| break; |
| case V4L2_CID_SATURATION: |
| ctrl->value = cam->color; |
| break; |
| case V4L2_CID_HUE: |
| ctrl->value = cam->hue; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cam_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| int ret = 0; |
| |
| mutex_lock(&cam->lock); |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| cam->brightness = ctrl->value; |
| break; |
| case V4L2_CID_CONTRAST: |
| cam->contrast = ctrl->value; |
| break; |
| case V4L2_CID_SATURATION: |
| cam->color = ctrl->value; |
| break; |
| case V4L2_CID_HUE: |
| cam->hue = ctrl->value; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret == 0) { |
| w9966_pdev_claim(cam); |
| |
| if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 || |
| w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 || |
| w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 || |
| w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) { |
| ret = -EIO; |
| } |
| |
| w9966_pdev_release(cam); |
| } |
| mutex_unlock(&cam->lock); |
| return ret; |
| } |
| |
| static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; |
| |
| pix->width = cam->width; |
| pix->height = cam->height; |
| pix->pixelformat = V4L2_PIX_FMT_YUYV; |
| pix->field = V4L2_FIELD_NONE; |
| pix->bytesperline = 2 * cam->width; |
| pix->sizeimage = 2 * cam->width * cam->height; |
| /* Just a guess */ |
| pix->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| return 0; |
| } |
| |
| static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) |
| { |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; |
| |
| if (pix->width < 2) |
| pix->width = 2; |
| if (pix->height < 1) |
| pix->height = 1; |
| if (pix->width > W9966_WND_MAX_W) |
| pix->width = W9966_WND_MAX_W; |
| if (pix->height > W9966_WND_MAX_H) |
| pix->height = W9966_WND_MAX_H; |
| pix->pixelformat = V4L2_PIX_FMT_YUYV; |
| pix->field = V4L2_FIELD_NONE; |
| pix->bytesperline = 2 * pix->width; |
| pix->sizeimage = 2 * pix->width * pix->height; |
| /* Just a guess */ |
| pix->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| return 0; |
| } |
| |
| static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| struct v4l2_pix_format *pix = &fmt->fmt.pix; |
| int ret = cam_try_fmt_vid_cap(file, fh, fmt); |
| |
| if (ret) |
| return ret; |
| |
| mutex_lock(&cam->lock); |
| /* Update camera regs */ |
| w9966_pdev_claim(cam); |
| ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height); |
| w9966_pdev_release(cam); |
| mutex_unlock(&cam->lock); |
| return ret; |
| } |
| |
| static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) |
| { |
| static struct v4l2_fmtdesc formats[] = { |
| { 0, 0, 0, |
| "YUV 4:2:2", V4L2_PIX_FMT_YUYV, |
| { 0, 0, 0, 0 } |
| }, |
| }; |
| enum v4l2_buf_type type = fmt->type; |
| |
| if (fmt->index > 0) |
| return -EINVAL; |
| |
| *fmt = formats[fmt->index]; |
| fmt->type = type; |
| return 0; |
| } |
| |
| /* Capture data */ |
| static ssize_t w9966_v4l_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct w9966 *cam = video_drvdata(file); |
| unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */ |
| unsigned char __user *dest = (unsigned char __user *)buf; |
| unsigned long dleft = count; |
| unsigned char *tbuf; |
| |
| /* Why would anyone want more than this?? */ |
| if (count > cam->width * cam->height * 2) |
| return -EINVAL; |
| |
| mutex_lock(&cam->lock); |
| w9966_pdev_claim(cam); |
| w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */ |
| w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */ |
| w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */ |
| |
| /* write special capture-addr and negotiate into data transfer */ |
| if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) || |
| (parport_write(cam->pport, &addr, 1) != 1) || |
| (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) { |
| w9966_pdev_release(cam); |
| mutex_unlock(&cam->lock); |
| return -EFAULT; |
| } |
| |
| tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL); |
| if (tbuf == NULL) { |
| count = -ENOMEM; |
| goto out; |
| } |
| |
| while (dleft > 0) { |
| unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft; |
| |
| if (parport_read(cam->pport, tbuf, tsize) < tsize) { |
| count = -EFAULT; |
| goto out; |
| } |
| if (copy_to_user(dest, tbuf, tsize) != 0) { |
| count = -EFAULT; |
| goto out; |
| } |
| dest += tsize; |
| dleft -= tsize; |
| } |
| |
| w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */ |
| |
| out: |
| kfree(tbuf); |
| w9966_pdev_release(cam); |
| mutex_unlock(&cam->lock); |
| |
| return count; |
| } |
| |
| static const struct v4l2_file_operations w9966_fops = { |
| .owner = THIS_MODULE, |
| .unlocked_ioctl = video_ioctl2, |
| .read = w9966_v4l_read, |
| }; |
| |
| static const struct v4l2_ioctl_ops w9966_ioctl_ops = { |
| .vidioc_querycap = cam_querycap, |
| .vidioc_g_input = cam_g_input, |
| .vidioc_s_input = cam_s_input, |
| .vidioc_enum_input = cam_enum_input, |
| .vidioc_queryctrl = cam_queryctrl, |
| .vidioc_g_ctrl = cam_g_ctrl, |
| .vidioc_s_ctrl = cam_s_ctrl, |
| .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap, |
| }; |
| |
| |
| /* Initialize camera device. Setup all internal flags, set a |
| default video mode, setup ccd-chip, register v4l device etc.. |
| Also used for 'probing' of hardware. |
| -1 on error */ |
| static int w9966_init(struct w9966 *cam, struct parport *port) |
| { |
| struct v4l2_device *v4l2_dev = &cam->v4l2_dev; |
| |
| if (cam->dev_state != 0) |
| return -1; |
| |
| strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name)); |
| |
| if (v4l2_device_register(NULL, v4l2_dev) < 0) { |
| v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); |
| return -1; |
| } |
| cam->pport = port; |
| cam->brightness = 128; |
| cam->contrast = 64; |
| cam->color = 64; |
| cam->hue = 0; |
| |
| /* Select requested transfer mode */ |
| switch (parmode) { |
| default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */ |
| case 0: |
| if (port->modes & PARPORT_MODE_ECP) |
| cam->ppmode = IEEE1284_MODE_ECP; |
| else if (port->modes & PARPORT_MODE_EPP) |
| cam->ppmode = IEEE1284_MODE_EPP; |
| else |
| cam->ppmode = IEEE1284_MODE_ECP; |
| break; |
| case 1: /* hw- or sw-ecp */ |
| cam->ppmode = IEEE1284_MODE_ECP; |
| break; |
| case 2: /* hw- or sw-epp */ |
| cam->ppmode = IEEE1284_MODE_EPP; |
| break; |
| } |
| |
| /* Tell the parport driver that we exists */ |
| cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL); |
| if (cam->pdev == NULL) { |
| DPRINTF("parport_register_device() failed\n"); |
| return -1; |
| } |
| w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV); |
| |
| w9966_pdev_claim(cam); |
| |
| /* Setup a default capture mode */ |
| if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) { |
| DPRINTF("w9966_setup() failed.\n"); |
| return -1; |
| } |
| |
| w9966_pdev_release(cam); |
| |
| /* Fill in the video_device struct and register us to v4l */ |
| strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name)); |
| cam->vdev.v4l2_dev = v4l2_dev; |
| cam->vdev.fops = &w9966_fops; |
| cam->vdev.ioctl_ops = &w9966_ioctl_ops; |
| cam->vdev.release = video_device_release_empty; |
| video_set_drvdata(&cam->vdev, cam); |
| |
| mutex_init(&cam->lock); |
| |
| if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) |
| return -1; |
| |
| w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); |
| |
| /* All ok */ |
| v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n", |
| cam->pport->name); |
| return 0; |
| } |
| |
| |
| /* Terminate everything gracefully */ |
| static void w9966_term(struct w9966 *cam) |
| { |
| /* Unregister from v4l */ |
| if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) { |
| video_unregister_device(&cam->vdev); |
| w9966_set_state(cam, W9966_STATE_VDEV, 0); |
| } |
| |
| /* Terminate from IEEE1284 mode and release pdev block */ |
| if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { |
| w9966_pdev_claim(cam); |
| parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT); |
| w9966_pdev_release(cam); |
| } |
| |
| /* Unregister from parport */ |
| if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { |
| parport_unregister_device(cam->pdev); |
| w9966_set_state(cam, W9966_STATE_PDEV, 0); |
| } |
| memset(cam, 0, sizeof(*cam)); |
| } |
| |
| |
| /* Called once for every parport on init */ |
| static void w9966_attach(struct parport *port) |
| { |
| int i; |
| |
| for (i = 0; i < W9966_MAXCAMS; i++) { |
| if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */ |
| continue; |
| if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) { |
| if (w9966_init(&w9966_cams[i], port) != 0) |
| w9966_term(&w9966_cams[i]); |
| break; /* return */ |
| } |
| } |
| } |
| |
| /* Called once for every parport on termination */ |
| static void w9966_detach(struct parport *port) |
| { |
| int i; |
| |
| for (i = 0; i < W9966_MAXCAMS; i++) |
| if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port) |
| w9966_term(&w9966_cams[i]); |
| } |
| |
| |
| static struct parport_driver w9966_ppd = { |
| .name = W9966_DRIVERNAME, |
| .attach = w9966_attach, |
| .detach = w9966_detach, |
| }; |
| |
| /* Module entry point */ |
| static int __init w9966_mod_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < W9966_MAXCAMS; i++) |
| w9966_cams[i].dev_state = 0; |
| |
| return parport_register_driver(&w9966_ppd); |
| } |
| |
| /* Module cleanup */ |
| static void __exit w9966_mod_term(void) |
| { |
| parport_unregister_driver(&w9966_ppd); |
| } |
| |
| module_init(w9966_mod_init); |
| module_exit(w9966_mod_term); |