| /* |
| * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner. |
| * |
| * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * |
| * This code is more or less generated from another driver, please |
| * excuse some codingstyle oddities. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| |
| #include "dvb_frontend.h" |
| |
| #include "dib0070.h" |
| #include "dibx000_common.h" |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); |
| |
| #define dprintk(args...) do { \ |
| if (debug) { \ |
| printk(KERN_DEBUG "DiB0070: "); \ |
| printk(args); \ |
| printk("\n"); \ |
| } \ |
| } while (0) |
| |
| #define DIB0070_P1D 0x00 |
| #define DIB0070_P1F 0x01 |
| #define DIB0070_P1G 0x03 |
| #define DIB0070S_P1A 0x02 |
| |
| struct dib0070_state { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend *fe; |
| const struct dib0070_config *cfg; |
| u16 wbd_ff_offset; |
| u8 revision; |
| |
| enum frontend_tune_state tune_state; |
| u32 current_rf; |
| |
| /* for the captrim binary search */ |
| s8 step; |
| u16 adc_diff; |
| |
| s8 captrim; |
| s8 fcaptrim; |
| u16 lo4; |
| |
| const struct dib0070_tuning *current_tune_table_index; |
| const struct dib0070_lna_match *lna_match; |
| |
| u8 wbd_gain_current; |
| u16 wbd_offset_3_3[2]; |
| |
| /* for the I2C transfer */ |
| struct i2c_msg msg[2]; |
| u8 i2c_write_buffer[3]; |
| u8 i2c_read_buffer[2]; |
| struct mutex i2c_buffer_lock; |
| }; |
| |
| static u16 dib0070_read_reg(struct dib0070_state *state, u8 reg) |
| { |
| u16 ret; |
| |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return 0; |
| } |
| |
| state->i2c_write_buffer[0] = reg; |
| |
| memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); |
| state->msg[0].addr = state->cfg->i2c_address; |
| state->msg[0].flags = 0; |
| state->msg[0].buf = state->i2c_write_buffer; |
| state->msg[0].len = 1; |
| state->msg[1].addr = state->cfg->i2c_address; |
| state->msg[1].flags = I2C_M_RD; |
| state->msg[1].buf = state->i2c_read_buffer; |
| state->msg[1].len = 2; |
| |
| if (i2c_transfer(state->i2c, state->msg, 2) != 2) { |
| printk(KERN_WARNING "DiB0070 I2C read failed\n"); |
| ret = 0; |
| } else |
| ret = (state->i2c_read_buffer[0] << 8) |
| | state->i2c_read_buffer[1]; |
| |
| mutex_unlock(&state->i2c_buffer_lock); |
| return ret; |
| } |
| |
| static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) |
| { |
| int ret; |
| |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return -EINVAL; |
| } |
| state->i2c_write_buffer[0] = reg; |
| state->i2c_write_buffer[1] = val >> 8; |
| state->i2c_write_buffer[2] = val & 0xff; |
| |
| memset(state->msg, 0, sizeof(struct i2c_msg)); |
| state->msg[0].addr = state->cfg->i2c_address; |
| state->msg[0].flags = 0; |
| state->msg[0].buf = state->i2c_write_buffer; |
| state->msg[0].len = 3; |
| |
| if (i2c_transfer(state->i2c, state->msg, 1) != 1) { |
| printk(KERN_WARNING "DiB0070 I2C write failed\n"); |
| ret = -EREMOTEIO; |
| } else |
| ret = 0; |
| |
| mutex_unlock(&state->i2c_buffer_lock); |
| return ret; |
| } |
| |
| #define HARD_RESET(state) do { \ |
| state->cfg->sleep(state->fe, 0); \ |
| if (state->cfg->reset) { \ |
| state->cfg->reset(state->fe,1); msleep(10); \ |
| state->cfg->reset(state->fe,0); msleep(10); \ |
| } \ |
| } while (0) |
| |
| static int dib0070_set_bandwidth(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff; |
| |
| if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 7000) |
| tmp |= (0 << 14); |
| else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 6000) |
| tmp |= (1 << 14); |
| else if (state->fe->dtv_property_cache.bandwidth_hz/1000 > 5000) |
| tmp |= (2 << 14); |
| else |
| tmp |= (3 << 14); |
| |
| dib0070_write_reg(state, 0x02, tmp); |
| |
| /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */ |
| if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) { |
| u16 value = dib0070_read_reg(state, 0x17); |
| |
| dib0070_write_reg(state, 0x17, value & 0xfffc); |
| tmp = dib0070_read_reg(state, 0x01) & 0x01ff; |
| dib0070_write_reg(state, 0x01, tmp | (60 << 9)); |
| |
| dib0070_write_reg(state, 0x17, value); |
| } |
| return 0; |
| } |
| |
| static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state) |
| { |
| int8_t step_sign; |
| u16 adc; |
| int ret = 0; |
| |
| if (*tune_state == CT_TUNER_STEP_0) { |
| |
| dib0070_write_reg(state, 0x0f, 0xed10); |
| dib0070_write_reg(state, 0x17, 0x0034); |
| |
| dib0070_write_reg(state, 0x18, 0x0032); |
| state->step = state->captrim = state->fcaptrim = 64; |
| state->adc_diff = 3000; |
| ret = 20; |
| |
| *tune_state = CT_TUNER_STEP_1; |
| } else if (*tune_state == CT_TUNER_STEP_1) { |
| state->step /= 2; |
| dib0070_write_reg(state, 0x14, state->lo4 | state->captrim); |
| ret = 15; |
| |
| *tune_state = CT_TUNER_STEP_2; |
| } else if (*tune_state == CT_TUNER_STEP_2) { |
| |
| adc = dib0070_read_reg(state, 0x19); |
| |
| dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024); |
| |
| if (adc >= 400) { |
| adc -= 400; |
| step_sign = -1; |
| } else { |
| adc = 400 - adc; |
| step_sign = 1; |
| } |
| |
| if (adc < state->adc_diff) { |
| dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff); |
| state->adc_diff = adc; |
| state->fcaptrim = state->captrim; |
| |
| |
| |
| } |
| state->captrim += (step_sign * state->step); |
| |
| if (state->step >= 1) |
| *tune_state = CT_TUNER_STEP_1; |
| else |
| *tune_state = CT_TUNER_STEP_3; |
| |
| } else if (*tune_state == CT_TUNER_STEP_3) { |
| dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim); |
| dib0070_write_reg(state, 0x18, 0x07ff); |
| *tune_state = CT_TUNER_STEP_4; |
| } |
| |
| return ret; |
| } |
| |
| static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); |
| dprintk("CTRL_LO5: 0x%x", lo5); |
| return dib0070_write_reg(state, 0x15, lo5); |
| } |
| |
| void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| |
| if (open) { |
| dib0070_write_reg(state, 0x1b, 0xff00); |
| dib0070_write_reg(state, 0x1a, 0x0000); |
| } else { |
| dib0070_write_reg(state, 0x1b, 0x4112); |
| if (state->cfg->vga_filter != 0) { |
| dib0070_write_reg(state, 0x1a, state->cfg->vga_filter); |
| dprintk("vga filter register is set to %x", state->cfg->vga_filter); |
| } else |
| dib0070_write_reg(state, 0x1a, 0x0009); |
| } |
| } |
| |
| EXPORT_SYMBOL(dib0070_ctrl_agc_filter); |
| struct dib0070_tuning { |
| u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ |
| u8 switch_trim; |
| u8 vco_band; |
| u8 hfdiv; |
| u8 vco_multi; |
| u8 presc; |
| u8 wbdmux; |
| u16 tuner_enable; |
| }; |
| |
| struct dib0070_lna_match { |
| u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ |
| u8 lna_band; |
| }; |
| |
| static const struct dib0070_tuning dib0070s_tuning_table[] = { |
| { 570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */ |
| { 700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 }, |
| { 863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 }, |
| { 1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */ |
| { 1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, |
| { 2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, |
| { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */ |
| }; |
| |
| static const struct dib0070_tuning dib0070_tuning_table[] = { |
| { 115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */ |
| { 179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */ |
| { 189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 }, |
| { 250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 }, |
| { 569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800 }, /* UHF */ |
| { 699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800 }, |
| { 863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800 }, |
| { 0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */ |
| }; |
| |
| static const struct dib0070_lna_match dib0070_lna_flip_chip[] = { |
| { 180000, 0 }, /* VHF */ |
| { 188000, 1 }, |
| { 196400, 2 }, |
| { 250000, 3 }, |
| { 550000, 0 }, /* UHF */ |
| { 590000, 1 }, |
| { 666000, 3 }, |
| { 864000, 5 }, |
| { 1500000, 0 }, /* LBAND or everything higher than UHF */ |
| { 1600000, 1 }, |
| { 2000000, 3 }, |
| { 0xffffffff, 7 }, |
| }; |
| |
| static const struct dib0070_lna_match dib0070_lna[] = { |
| { 180000, 0 }, /* VHF */ |
| { 188000, 1 }, |
| { 196400, 2 }, |
| { 250000, 3 }, |
| { 550000, 2 }, /* UHF */ |
| { 650000, 3 }, |
| { 750000, 5 }, |
| { 850000, 6 }, |
| { 864000, 7 }, |
| { 1500000, 0 }, /* LBAND or everything higher than UHF */ |
| { 1600000, 1 }, |
| { 2000000, 3 }, |
| { 0xffffffff, 7 }, |
| }; |
| |
| #define LPF 100 |
| static int dib0070_tune_digital(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| |
| const struct dib0070_tuning *tune; |
| const struct dib0070_lna_match *lna_match; |
| |
| enum frontend_tune_state *tune_state = &state->tune_state; |
| int ret = 10; /* 1ms is the default delay most of the time */ |
| |
| u8 band = (u8)BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency/1000); |
| u32 freq = fe->dtv_property_cache.frequency/1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf); |
| |
| #ifdef CONFIG_SYS_ISDBT |
| if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) |
| if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) |
| && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) |
| || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) |
| && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2))) |
| || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) |
| && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))) |
| freq += 850; |
| #endif |
| if (state->current_rf != freq) { |
| |
| switch (state->revision) { |
| case DIB0070S_P1A: |
| tune = dib0070s_tuning_table; |
| lna_match = dib0070_lna; |
| break; |
| default: |
| tune = dib0070_tuning_table; |
| if (state->cfg->flip_chip) |
| lna_match = dib0070_lna_flip_chip; |
| else |
| lna_match = dib0070_lna; |
| break; |
| } |
| while (freq > tune->max_freq) /* find the right one */ |
| tune++; |
| while (freq > lna_match->max_freq) /* find the right one */ |
| lna_match++; |
| |
| state->current_tune_table_index = tune; |
| state->lna_match = lna_match; |
| } |
| |
| if (*tune_state == CT_TUNER_START) { |
| dprintk("Tuning for Band: %hd (%d kHz)", band, freq); |
| if (state->current_rf != freq) { |
| u8 REFDIV; |
| u32 FBDiv, Rest, FREF, VCOF_kHz; |
| u8 Den; |
| |
| state->current_rf = freq; |
| state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7); |
| |
| |
| dib0070_write_reg(state, 0x17, 0x30); |
| |
| |
| VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2; |
| |
| switch (band) { |
| case BAND_VHF: |
| REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000); |
| break; |
| case BAND_FM: |
| REFDIV = (u8) ((state->cfg->clock_khz) / 1000); |
| break; |
| default: |
| REFDIV = (u8) (state->cfg->clock_khz / 10000); |
| break; |
| } |
| FREF = state->cfg->clock_khz / REFDIV; |
| |
| |
| |
| switch (state->revision) { |
| case DIB0070S_P1A: |
| FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF); |
| Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF; |
| break; |
| |
| case DIB0070_P1G: |
| case DIB0070_P1F: |
| default: |
| FBDiv = (freq / (FREF / 2)); |
| Rest = 2 * freq - FBDiv * FREF; |
| break; |
| } |
| |
| if (Rest < LPF) |
| Rest = 0; |
| else if (Rest < 2 * LPF) |
| Rest = 2 * LPF; |
| else if (Rest > (FREF - LPF)) { |
| Rest = 0; |
| FBDiv += 1; |
| } else if (Rest > (FREF - 2 * LPF)) |
| Rest = FREF - 2 * LPF; |
| Rest = (Rest * 6528) / (FREF / 10); |
| |
| Den = 1; |
| if (Rest > 0) { |
| state->lo4 |= (1 << 14) | (1 << 12); |
| Den = 255; |
| } |
| |
| |
| dib0070_write_reg(state, 0x11, (u16)FBDiv); |
| dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV); |
| dib0070_write_reg(state, 0x13, (u16) Rest); |
| |
| if (state->revision == DIB0070S_P1A) { |
| |
| if (band == BAND_SBAND) { |
| dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); |
| dib0070_write_reg(state, 0x1d, 0xFFFF); |
| } else |
| dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1); |
| } |
| |
| dib0070_write_reg(state, 0x20, |
| 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable); |
| |
| dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF); |
| dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest); |
| dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1); |
| dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv); |
| dprintk("VCO = %hd", state->current_tune_table_index->vco_band); |
| dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq); |
| |
| *tune_state = CT_TUNER_STEP_0; |
| } else { /* we are already tuned to this frequency - the configuration is correct */ |
| ret = 50; /* wakeup time */ |
| *tune_state = CT_TUNER_STEP_5; |
| } |
| } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) { |
| |
| ret = dib0070_captrim(state, tune_state); |
| |
| } else if (*tune_state == CT_TUNER_STEP_4) { |
| const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; |
| if (tmp != NULL) { |
| while (freq/1000 > tmp->freq) /* find the right one */ |
| tmp++; |
| dib0070_write_reg(state, 0x0f, |
| (0 << 15) | (1 << 14) | (3 << 12) |
| | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) |
| | (state->current_tune_table_index->wbdmux << 0)); |
| state->wbd_gain_current = tmp->wbd_gain_val; |
| } else { |
| dib0070_write_reg(state, 0x0f, |
| (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index-> |
| wbdmux << 0)); |
| state->wbd_gain_current = 6; |
| } |
| |
| dib0070_write_reg(state, 0x06, 0x3fff); |
| dib0070_write_reg(state, 0x07, |
| (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0)); |
| dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127)); |
| dib0070_write_reg(state, 0x0d, 0x0d80); |
| |
| |
| dib0070_write_reg(state, 0x18, 0x07ff); |
| dib0070_write_reg(state, 0x17, 0x0033); |
| |
| |
| *tune_state = CT_TUNER_STEP_5; |
| } else if (*tune_state == CT_TUNER_STEP_5) { |
| dib0070_set_bandwidth(fe); |
| *tune_state = CT_TUNER_STOP; |
| } else { |
| ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */ |
| } |
| return ret; |
| } |
| |
| |
| static int dib0070_tune(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| uint32_t ret; |
| |
| state->tune_state = CT_TUNER_START; |
| |
| do { |
| ret = dib0070_tune_digital(fe); |
| if (ret != FE_CALLBACK_TIME_NEVER) |
| msleep(ret/10); |
| else |
| break; |
| } while (state->tune_state != CT_TUNER_STOP); |
| |
| return 0; |
| } |
| |
| static int dib0070_wakeup(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| if (state->cfg->sleep) |
| state->cfg->sleep(fe, 0); |
| return 0; |
| } |
| |
| static int dib0070_sleep(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| if (state->cfg->sleep) |
| state->cfg->sleep(fe, 1); |
| return 0; |
| } |
| |
| u8 dib0070_get_rf_output(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| return (dib0070_read_reg(state, 0x07) >> 11) & 0x3; |
| } |
| EXPORT_SYMBOL(dib0070_get_rf_output); |
| |
| int dib0070_set_rf_output(struct dvb_frontend *fe, u8 no) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| u16 rxrf2 = dib0070_read_reg(state, 0x07) & 0xfe7ff; |
| if (no > 3) |
| no = 3; |
| if (no < 1) |
| no = 1; |
| return dib0070_write_reg(state, 0x07, rxrf2 | (no << 11)); |
| } |
| EXPORT_SYMBOL(dib0070_set_rf_output); |
| |
| static const u16 dib0070_p1f_defaults[] = |
| |
| { |
| 7, 0x02, |
| 0x0008, |
| 0x0000, |
| 0x0000, |
| 0x0000, |
| 0x0000, |
| 0x0002, |
| 0x0100, |
| |
| 3, 0x0d, |
| 0x0d80, |
| 0x0001, |
| 0x0000, |
| |
| 4, 0x11, |
| 0x0000, |
| 0x0103, |
| 0x0000, |
| 0x0000, |
| |
| 3, 0x16, |
| 0x0004 | 0x0040, |
| 0x0030, |
| 0x07ff, |
| |
| 6, 0x1b, |
| 0x4112, |
| 0xff00, |
| 0xc07f, |
| 0x0000, |
| 0x0180, |
| 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, |
| |
| 0, |
| }; |
| |
| static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain) |
| { |
| u16 tuner_en = dib0070_read_reg(state, 0x20); |
| u16 offset; |
| |
| dib0070_write_reg(state, 0x18, 0x07ff); |
| dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); |
| dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0)); |
| msleep(9); |
| offset = dib0070_read_reg(state, 0x19); |
| dib0070_write_reg(state, 0x20, tuner_en); |
| return offset; |
| } |
| |
| static void dib0070_wbd_offset_calibration(struct dib0070_state *state) |
| { |
| u8 gain; |
| for (gain = 6; gain < 8; gain++) { |
| state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2); |
| dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]); |
| } |
| } |
| |
| u16 dib0070_wbd_offset(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; |
| u32 freq = fe->dtv_property_cache.frequency/1000; |
| |
| if (tmp != NULL) { |
| while (freq/1000 > tmp->freq) /* find the right one */ |
| tmp++; |
| state->wbd_gain_current = tmp->wbd_gain_val; |
| } else |
| state->wbd_gain_current = 6; |
| |
| return state->wbd_offset_3_3[state->wbd_gain_current - 6]; |
| } |
| EXPORT_SYMBOL(dib0070_wbd_offset); |
| |
| #define pgm_read_word(w) (*w) |
| static int dib0070_reset(struct dvb_frontend *fe) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| u16 l, r, *n; |
| |
| HARD_RESET(state); |
| |
| |
| #ifndef FORCE_SBAND_TUNER |
| if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1) |
| state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff; |
| else |
| #else |
| #warning forcing SBAND |
| #endif |
| state->revision = DIB0070S_P1A; |
| |
| /* P1F or not */ |
| dprintk("Revision: %x", state->revision); |
| |
| if (state->revision == DIB0070_P1D) { |
| dprintk("Error: this driver is not to be used meant for P1D or earlier"); |
| return -EINVAL; |
| } |
| |
| n = (u16 *) dib0070_p1f_defaults; |
| l = pgm_read_word(n++); |
| while (l) { |
| r = pgm_read_word(n++); |
| do { |
| dib0070_write_reg(state, (u8)r, pgm_read_word(n++)); |
| r++; |
| } while (--l); |
| l = pgm_read_word(n++); |
| } |
| |
| if (state->cfg->force_crystal_mode != 0) |
| r = state->cfg->force_crystal_mode; |
| else if (state->cfg->clock_khz >= 24000) |
| r = 1; |
| else |
| r = 2; |
| |
| |
| r |= state->cfg->osc_buffer_state << 3; |
| |
| dib0070_write_reg(state, 0x10, r); |
| dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5)); |
| |
| if (state->cfg->invert_iq) { |
| r = dib0070_read_reg(state, 0x02) & 0xffdf; |
| dib0070_write_reg(state, 0x02, r | (1 << 5)); |
| } |
| |
| if (state->revision == DIB0070S_P1A) |
| dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); |
| else |
| dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter); |
| |
| dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8); |
| |
| dib0070_wbd_offset_calibration(state); |
| |
| return 0; |
| } |
| |
| static int dib0070_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct dib0070_state *state = fe->tuner_priv; |
| |
| *frequency = 1000 * state->current_rf; |
| return 0; |
| } |
| |
| static int dib0070_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| return 0; |
| } |
| |
| static const struct dvb_tuner_ops dib0070_ops = { |
| .info = { |
| .name = "DiBcom DiB0070", |
| .frequency_min = 45000000, |
| .frequency_max = 860000000, |
| .frequency_step = 1000, |
| }, |
| .release = dib0070_release, |
| |
| .init = dib0070_wakeup, |
| .sleep = dib0070_sleep, |
| .set_params = dib0070_tune, |
| |
| .get_frequency = dib0070_get_frequency, |
| // .get_bandwidth = dib0070_get_bandwidth |
| }; |
| |
| struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) |
| { |
| struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL); |
| if (state == NULL) |
| return NULL; |
| |
| state->cfg = cfg; |
| state->i2c = i2c; |
| state->fe = fe; |
| mutex_init(&state->i2c_buffer_lock); |
| fe->tuner_priv = state; |
| |
| if (dib0070_reset(fe) != 0) |
| goto free_mem; |
| |
| printk(KERN_INFO "DiB0070: successfully identified\n"); |
| memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops)); |
| |
| fe->tuner_priv = state; |
| return fe; |
| |
| free_mem: |
| kfree(state); |
| fe->tuner_priv = NULL; |
| return NULL; |
| } |
| EXPORT_SYMBOL(dib0070_attach); |
| |
| MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); |
| MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner"); |
| MODULE_LICENSE("GPL"); |