arch/powerpc/platforms/cell/pmu.c - maze/linux - Git at Google

 /*
  * Cell Broadband Engine Performance Monitor
  *
  * (C) Copyright IBM Corporation 2001,2006
  *
  * Author:
  *    David Erb (djerb@us.ibm.com)
  *    Kevin Corry (kevcorry@us.ibm.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/export.h>
 #include <asm/io.h>
 #include <asm/irq_regs.h>
 #include <asm/machdep.h>
 #include <asm/pmc.h>
 #include <asm/reg.h>
 #include <asm/spu.h>
 #include <asm/cell-regs.h>

 #include "interrupt.h"

 /*
  * When writing to write-only mmio addresses, save a shadow copy. All of the
  * registers are 32-bit, but stored in the upper-half of a 64-bit field in
  * pmd_regs.
  */

 #define WRITE_WO_MMIO(reg, x)					\
 	do {							\
 		u32 _x = (x);					\
 		struct cbe_pmd_regs __iomem *pmd_regs;		\
 		struct cbe_pmd_shadow_regs *shadow_regs;	\
 		pmd_regs = cbe_get_cpu_pmd_regs(cpu);		\
 		shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);	\
 		out_be64(&(pmd_regs->reg), (((u64)_x) << 32));	\
 		shadow_regs->reg = _x;				\
 	} while (0)

 #define READ_SHADOW_REG(val, reg)				\
 	do {							\
 		struct cbe_pmd_shadow_regs *shadow_regs;	\
 		shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);	\
 		(val) = shadow_regs->reg;			\
 	} while (0)

 #define READ_MMIO_UPPER32(val, reg)				\
 	do {							\
 		struct cbe_pmd_regs __iomem *pmd_regs;		\
 		pmd_regs = cbe_get_cpu_pmd_regs(cpu);		\
 		(val) = (u32)(in_be64(&pmd_regs->reg) >> 32);	\
 	} while (0)

 /*
  * Physical counter registers.
  * Each physical counter can act as one 32-bit counter or two 16-bit counters.
  */

 u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr)
 {
 	u32 val_in_latch, val = 0;

 	if (phys_ctr < NR_PHYS_CTRS) {
 		READ_SHADOW_REG(val_in_latch, counter_value_in_latch);

 		/* Read the latch or the actual counter, whichever is newer. */
 		if (val_in_latch & (1 << phys_ctr)) {
 			READ_SHADOW_REG(val, pm_ctr[phys_ctr]);
 		} else {
 			READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]);
 		}
 	}

 	return val;
 }
 EXPORT_SYMBOL_GPL(cbe_read_phys_ctr);

 void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
 {
 	struct cbe_pmd_shadow_regs *shadow_regs;
 	u32 pm_ctrl;

 	if (phys_ctr < NR_PHYS_CTRS) {
 		/* Writing to a counter only writes to a hardware latch.
 		 * The new value is not propagated to the actual counter
 		 * until the performance monitor is enabled.
 		 */
 		WRITE_WO_MMIO(pm_ctr[phys_ctr], val);

 		pm_ctrl = cbe_read_pm(cpu, pm_control);
 		if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) {
 			/* The counters are already active, so we need to
 			 * rewrite the pm_control register to "re-enable"
 			 * the PMU.
 			 */
 			cbe_write_pm(cpu, pm_control, pm_ctrl);
 		} else {
 			shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
 			shadow_regs->counter_value_in_latch |= (1 << phys_ctr);
 		}
 	}
 }
 EXPORT_SYMBOL_GPL(cbe_write_phys_ctr);

 /*
  * "Logical" counter registers.
  * These will read/write 16-bits or 32-bits depending on the
  * current size of the counter. Counters 4 - 7 are always 16-bit.
  */

 u32 cbe_read_ctr(u32 cpu, u32 ctr)
 {
 	u32 val;
 	u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);

 	val = cbe_read_phys_ctr(cpu, phys_ctr);

 	if (cbe_get_ctr_size(cpu, phys_ctr) == 16)
 		val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);

 	return val;
 }
 EXPORT_SYMBOL_GPL(cbe_read_ctr);

 void cbe_write_ctr(u32 cpu, u32 ctr, u32 val)
 {
 	u32 phys_ctr;
 	u32 phys_val;

 	phys_ctr = ctr & (NR_PHYS_CTRS - 1);

 	if (cbe_get_ctr_size(cpu, phys_ctr) == 16) {
 		phys_val = cbe_read_phys_ctr(cpu, phys_ctr);

 		if (ctr < NR_PHYS_CTRS)
 			val = (val << 16) | (phys_val & 0xffff);
 		else
 			val = (val & 0xffff) | (phys_val & 0xffff0000);
 	}

 	cbe_write_phys_ctr(cpu, phys_ctr, val);
 }
 EXPORT_SYMBOL_GPL(cbe_write_ctr);

 /*
  * Counter-control registers.
  * Each "logical" counter has a corresponding control register.
  */

 u32 cbe_read_pm07_control(u32 cpu, u32 ctr)
 {
 	u32 pm07_control = 0;

 	if (ctr < NR_CTRS)
 		READ_SHADOW_REG(pm07_control, pm07_control[ctr]);

 	return pm07_control;
 }
 EXPORT_SYMBOL_GPL(cbe_read_pm07_control);

 void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val)
 {
 	if (ctr < NR_CTRS)
 		WRITE_WO_MMIO(pm07_control[ctr], val);
 }
 EXPORT_SYMBOL_GPL(cbe_write_pm07_control);

 /*
  * Other PMU control registers. Most of these are write-only.
  */

 u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
 {
 	u32 val = 0;

 	switch (reg) {
 	case group_control:
 		READ_SHADOW_REG(val, group_control);
 		break;

 	case debug_bus_control:
 		READ_SHADOW_REG(val, debug_bus_control);
 		break;

 	case trace_address:
 		READ_MMIO_UPPER32(val, trace_address);
 		break;

 	case ext_tr_timer:
 		READ_SHADOW_REG(val, ext_tr_timer);
 		break;

 	case pm_status:
 		READ_MMIO_UPPER32(val, pm_status);
 		break;

 	case pm_control:
 		READ_SHADOW_REG(val, pm_control);
 		break;

 	case pm_interval:
 		READ_MMIO_UPPER32(val, pm_interval);
 		break;

 	case pm_start_stop:
 		READ_SHADOW_REG(val, pm_start_stop);
 		break;
 	}

 	return val;
 }
 EXPORT_SYMBOL_GPL(cbe_read_pm);

 void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
 {
 	switch (reg) {
 	case group_control:
 		WRITE_WO_MMIO(group_control, val);
 		break;

 	case debug_bus_control:
 		WRITE_WO_MMIO(debug_bus_control, val);
 		break;

 	case trace_address:
 		WRITE_WO_MMIO(trace_address, val);
 		break;

 	case ext_tr_timer:
 		WRITE_WO_MMIO(ext_tr_timer, val);
 		break;

 	case pm_status:
 		WRITE_WO_MMIO(pm_status, val);
 		break;

 	case pm_control:
 		WRITE_WO_MMIO(pm_control, val);
 		break;

 	case pm_interval:
 		WRITE_WO_MMIO(pm_interval, val);
 		break;

 	case pm_start_stop:
 		WRITE_WO_MMIO(pm_start_stop, val);
 		break;
 	}
 }
 EXPORT_SYMBOL_GPL(cbe_write_pm);

 /*
  * Get/set the size of a physical counter to either 16 or 32 bits.
  */

 u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr)
 {
 	u32 pm_ctrl, size = 0;

 	if (phys_ctr < NR_PHYS_CTRS) {
 		pm_ctrl = cbe_read_pm(cpu, pm_control);
 		size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
 	}

 	return size;
 }
 EXPORT_SYMBOL_GPL(cbe_get_ctr_size);

 void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
 {
 	u32 pm_ctrl;

 	if (phys_ctr < NR_PHYS_CTRS) {
 		pm_ctrl = cbe_read_pm(cpu, pm_control);
 		switch (ctr_size) {
 		case 16:
 			pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr);
 			break;

 		case 32:
 			pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
 			break;
 		}
 		cbe_write_pm(cpu, pm_control, pm_ctrl);
 	}
 }
 EXPORT_SYMBOL_GPL(cbe_set_ctr_size);

 /*
  * Enable/disable the entire performance monitoring unit.
  * When we enable the PMU, all pending writes to counters get committed.
  */

 void cbe_enable_pm(u32 cpu)
 {
 	struct cbe_pmd_shadow_regs *shadow_regs;
 	u32 pm_ctrl;

 	shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
 	shadow_regs->counter_value_in_latch = 0;

 	pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON;
 	cbe_write_pm(cpu, pm_control, pm_ctrl);
 }
 EXPORT_SYMBOL_GPL(cbe_enable_pm);

 void cbe_disable_pm(u32 cpu)
 {
 	u32 pm_ctrl;
 	pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON;
 	cbe_write_pm(cpu, pm_control, pm_ctrl);
 }
 EXPORT_SYMBOL_GPL(cbe_disable_pm);

 /*
  * Reading from the trace_buffer.
  * The trace buffer is two 64-bit registers. Reading from
  * the second half automatically increments the trace_address.
  */

 void cbe_read_trace_buffer(u32 cpu, u64 *buf)
 {
 	struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu);

 	*buf++ = in_be64(&pmd_regs->trace_buffer_0_63);
 	*buf++ = in_be64(&pmd_regs->trace_buffer_64_127);
 }
 EXPORT_SYMBOL_GPL(cbe_read_trace_buffer);

 /*
  * Enabling/disabling interrupts for the entire performance monitoring unit.
  */

 u32 cbe_get_and_clear_pm_interrupts(u32 cpu)
 {
 	/* Reading pm_status clears the interrupt bits. */
 	return cbe_read_pm(cpu, pm_status);
 }
 EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts);

 void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
 {
 	/* Set which node and thread will handle the next interrupt. */
 	iic_set_interrupt_routing(cpu, thread, 0);

 	/* Enable the interrupt bits in the pm_status register. */
 	if (mask)
 		cbe_write_pm(cpu, pm_status, mask);
 }
 EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts);

 void cbe_disable_pm_interrupts(u32 cpu)
 {
 	cbe_get_and_clear_pm_interrupts(cpu);
 	cbe_write_pm(cpu, pm_status, 0);
 }
 EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts);

 static irqreturn_t cbe_pm_irq(int irq, void *dev_id)
 {
 	perf_irq(get_irq_regs());
 	return IRQ_HANDLED;
 }

 static int __init cbe_init_pm_irq(void)
 {
 	unsigned int irq;
 	int rc, node;

 	for_each_node(node) {
 		irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
 					       (node << IIC_IRQ_NODE_SHIFT));
 		if (irq == NO_IRQ) {
 			printk("ERROR: Unable to allocate irq for node %d\n",
 			       node);
 			return -EINVAL;
 		}

 		rc = request_irq(irq, cbe_pm_irq,
 				 0, "cbe-pmu-0", NULL);
 		if (rc) {
 			printk("ERROR: Request for irq on node %d failed\n",
 			       node);
 			return rc;
 		}
 	}

 	return 0;
 }
 machine_arch_initcall(cell, cbe_init_pm_irq);

 void cbe_sync_irq(int node)
 {
 	unsigned int irq;

 	irq = irq_find_mapping(NULL,
 			       IIC_IRQ_IOEX_PMI
 			       | (node << IIC_IRQ_NODE_SHIFT));

 	if (irq == NO_IRQ) {
 		printk(KERN_WARNING "ERROR, unable to get existing irq %d " \
 		"for node %d\n", irq, node);
 		return;
 	}

 	synchronize_irq(irq);
 }
 EXPORT_SYMBOL_GPL(cbe_sync_irq);
	/*
	* Cell Broadband Engine Performance Monitor
	*
	* (C) Copyright IBM Corporation 2001,2006
	*
	* Author:
	* David Erb (djerb@us.ibm.com)
	* Kevin Corry (kevcorry@us.ibm.com)
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/interrupt.h>
	#include <linux/types.h>
	#include <linux/export.h>
	#include <asm/io.h>
	#include <asm/irq_regs.h>
	#include <asm/machdep.h>
	#include <asm/pmc.h>
	#include <asm/reg.h>
	#include <asm/spu.h>
	#include <asm/cell-regs.h>

	#include "interrupt.h"

	/*
	* When writing to write-only mmio addresses, save a shadow copy. All of the
	* registers are 32-bit, but stored in the upper-half of a 64-bit field in
	* pmd_regs.
	*/

	#define WRITE_WO_MMIO(reg, x) \
	do { \
	u32 _x = (x); \
	struct cbe_pmd_regs __iomem *pmd_regs; \
	struct cbe_pmd_shadow_regs *shadow_regs; \
	pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
	shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
	out_be64(&(pmd_regs->reg), (((u64)_x) << 32)); \
	shadow_regs->reg = _x; \
	} while (0)

	#define READ_SHADOW_REG(val, reg) \
	do { \
	struct cbe_pmd_shadow_regs *shadow_regs; \
	shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
	(val) = shadow_regs->reg; \
	} while (0)

	#define READ_MMIO_UPPER32(val, reg) \
	do { \
	struct cbe_pmd_regs __iomem *pmd_regs; \
	pmd_regs = cbe_get_cpu_pmd_regs(cpu); \
	(val) = (u32)(in_be64(&pmd_regs->reg) >> 32); \
	} while (0)

	/*
	* Physical counter registers.
	* Each physical counter can act as one 32-bit counter or two 16-bit counters.
	*/

	u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr)
	{
	u32 val_in_latch, val = 0;

	if (phys_ctr < NR_PHYS_CTRS) {
	READ_SHADOW_REG(val_in_latch, counter_value_in_latch);

	/* Read the latch or the actual counter, whichever is newer. */
	if (val_in_latch & (1 << phys_ctr)) {
	READ_SHADOW_REG(val, pm_ctr[phys_ctr]);
	} else {
	READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]);
	}
	}

	return val;
	}
	EXPORT_SYMBOL_GPL(cbe_read_phys_ctr);

	void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
	{
	struct cbe_pmd_shadow_regs *shadow_regs;
	u32 pm_ctrl;

	if (phys_ctr < NR_PHYS_CTRS) {
	/* Writing to a counter only writes to a hardware latch.
	* The new value is not propagated to the actual counter
	* until the performance monitor is enabled.
	*/
	WRITE_WO_MMIO(pm_ctr[phys_ctr], val);

	pm_ctrl = cbe_read_pm(cpu, pm_control);
	if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) {
	/* The counters are already active, so we need to
	* rewrite the pm_control register to "re-enable"
	* the PMU.
	*/
	cbe_write_pm(cpu, pm_control, pm_ctrl);
	} else {
	shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
	shadow_regs->counter_value_in_latch \|= (1 << phys_ctr);
	}
	}
	}
	EXPORT_SYMBOL_GPL(cbe_write_phys_ctr);

	/*
	* "Logical" counter registers.
	* These will read/write 16-bits or 32-bits depending on the
	* current size of the counter. Counters 4 - 7 are always 16-bit.
	*/

	u32 cbe_read_ctr(u32 cpu, u32 ctr)
	{
	u32 val;
	u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);

	val = cbe_read_phys_ctr(cpu, phys_ctr);

	if (cbe_get_ctr_size(cpu, phys_ctr) == 16)
	val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);

	return val;
	}
	EXPORT_SYMBOL_GPL(cbe_read_ctr);

	void cbe_write_ctr(u32 cpu, u32 ctr, u32 val)
	{
	u32 phys_ctr;
	u32 phys_val;

	phys_ctr = ctr & (NR_PHYS_CTRS - 1);

	if (cbe_get_ctr_size(cpu, phys_ctr) == 16) {
	phys_val = cbe_read_phys_ctr(cpu, phys_ctr);

	if (ctr < NR_PHYS_CTRS)
	val = (val << 16) \| (phys_val & 0xffff);
	else
	val = (val & 0xffff) \| (phys_val & 0xffff0000);
	}

	cbe_write_phys_ctr(cpu, phys_ctr, val);
	}
	EXPORT_SYMBOL_GPL(cbe_write_ctr);

	/*
	* Counter-control registers.
	* Each "logical" counter has a corresponding control register.
	*/

	u32 cbe_read_pm07_control(u32 cpu, u32 ctr)
	{
	u32 pm07_control = 0;

	if (ctr < NR_CTRS)
	READ_SHADOW_REG(pm07_control, pm07_control[ctr]);

	return pm07_control;
	}
	EXPORT_SYMBOL_GPL(cbe_read_pm07_control);

	void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val)
	{
	if (ctr < NR_CTRS)
	WRITE_WO_MMIO(pm07_control[ctr], val);
	}
	EXPORT_SYMBOL_GPL(cbe_write_pm07_control);

	/*
	* Other PMU control registers. Most of these are write-only.
	*/

	u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
	{
	u32 val = 0;

	switch (reg) {
	case group_control:
	READ_SHADOW_REG(val, group_control);
	break;

	case debug_bus_control:
	READ_SHADOW_REG(val, debug_bus_control);
	break;

	case trace_address:
	READ_MMIO_UPPER32(val, trace_address);
	break;

	case ext_tr_timer:
	READ_SHADOW_REG(val, ext_tr_timer);
	break;

	case pm_status:
	READ_MMIO_UPPER32(val, pm_status);
	break;

	case pm_control:
	READ_SHADOW_REG(val, pm_control);
	break;

	case pm_interval:
	READ_MMIO_UPPER32(val, pm_interval);
	break;

	case pm_start_stop:
	READ_SHADOW_REG(val, pm_start_stop);
	break;
	}

	return val;
	}
	EXPORT_SYMBOL_GPL(cbe_read_pm);

	void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
	{
	switch (reg) {
	case group_control:
	WRITE_WO_MMIO(group_control, val);
	break;

	case debug_bus_control:
	WRITE_WO_MMIO(debug_bus_control, val);
	break;

	case trace_address:
	WRITE_WO_MMIO(trace_address, val);
	break;

	case ext_tr_timer:
	WRITE_WO_MMIO(ext_tr_timer, val);
	break;

	case pm_status:
	WRITE_WO_MMIO(pm_status, val);
	break;

	case pm_control:
	WRITE_WO_MMIO(pm_control, val);
	break;

	case pm_interval:
	WRITE_WO_MMIO(pm_interval, val);
	break;

	case pm_start_stop:
	WRITE_WO_MMIO(pm_start_stop, val);
	break;
	}
	}
	EXPORT_SYMBOL_GPL(cbe_write_pm);

	/*
	* Get/set the size of a physical counter to either 16 or 32 bits.
	*/

	u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr)
	{
	u32 pm_ctrl, size = 0;

	if (phys_ctr < NR_PHYS_CTRS) {
	pm_ctrl = cbe_read_pm(cpu, pm_control);
	size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
	}

	return size;
	}
	EXPORT_SYMBOL_GPL(cbe_get_ctr_size);

	void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
	{
	u32 pm_ctrl;

	if (phys_ctr < NR_PHYS_CTRS) {
	pm_ctrl = cbe_read_pm(cpu, pm_control);
	switch (ctr_size) {
	case 16:
	pm_ctrl \|= CBE_PM_16BIT_CTR(phys_ctr);
	break;

	case 32:
	pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
	break;
	}
	cbe_write_pm(cpu, pm_control, pm_ctrl);
	}
	}
	EXPORT_SYMBOL_GPL(cbe_set_ctr_size);

	/*
	* Enable/disable the entire performance monitoring unit.
	* When we enable the PMU, all pending writes to counters get committed.
	*/

	void cbe_enable_pm(u32 cpu)
	{
	struct cbe_pmd_shadow_regs *shadow_regs;
	u32 pm_ctrl;

	shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
	shadow_regs->counter_value_in_latch = 0;

	pm_ctrl = cbe_read_pm(cpu, pm_control) \| CBE_PM_ENABLE_PERF_MON;
	cbe_write_pm(cpu, pm_control, pm_ctrl);
	}
	EXPORT_SYMBOL_GPL(cbe_enable_pm);

	void cbe_disable_pm(u32 cpu)
	{
	u32 pm_ctrl;
	pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON;
	cbe_write_pm(cpu, pm_control, pm_ctrl);
	}
	EXPORT_SYMBOL_GPL(cbe_disable_pm);

	/*
	* Reading from the trace_buffer.
	* The trace buffer is two 64-bit registers. Reading from
	* the second half automatically increments the trace_address.
	*/

	void cbe_read_trace_buffer(u32 cpu, u64 *buf)
	{
	struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu);

	*buf++ = in_be64(&pmd_regs->trace_buffer_0_63);
	*buf++ = in_be64(&pmd_regs->trace_buffer_64_127);
	}
	EXPORT_SYMBOL_GPL(cbe_read_trace_buffer);

	/*
	* Enabling/disabling interrupts for the entire performance monitoring unit.
	*/

	u32 cbe_get_and_clear_pm_interrupts(u32 cpu)
	{
	/* Reading pm_status clears the interrupt bits. */
	return cbe_read_pm(cpu, pm_status);
	}
	EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts);

	void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
	{
	/* Set which node and thread will handle the next interrupt. */
	iic_set_interrupt_routing(cpu, thread, 0);

	/* Enable the interrupt bits in the pm_status register. */
	if (mask)
	cbe_write_pm(cpu, pm_status, mask);
	}
	EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts);

	void cbe_disable_pm_interrupts(u32 cpu)
	{
	cbe_get_and_clear_pm_interrupts(cpu);
	cbe_write_pm(cpu, pm_status, 0);
	}
	EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts);

	static irqreturn_t cbe_pm_irq(int irq, void *dev_id)
	{
	perf_irq(get_irq_regs());
	return IRQ_HANDLED;
	}

	static int __init cbe_init_pm_irq(void)
	{
	unsigned int irq;
	int rc, node;

	for_each_node(node) {
	irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI \|
	(node << IIC_IRQ_NODE_SHIFT));
	if (irq == NO_IRQ) {
	printk("ERROR: Unable to allocate irq for node %d\n",
	node);
	return -EINVAL;
	}

	rc = request_irq(irq, cbe_pm_irq,
	0, "cbe-pmu-0", NULL);
	if (rc) {
	printk("ERROR: Request for irq on node %d failed\n",
	node);
	return rc;
	}
	}

	return 0;
	}
	machine_arch_initcall(cell, cbe_init_pm_irq);

	void cbe_sync_irq(int node)
	{
	unsigned int irq;

	irq = irq_find_mapping(NULL,
	IIC_IRQ_IOEX_PMI
	\| (node << IIC_IRQ_NODE_SHIFT));

	if (irq == NO_IRQ) {
	printk(KERN_WARNING "ERROR, unable to get existing irq %d " \
	"for node %d\n", irq, node);
	return;
	}

	synchronize_irq(irq);
	}
	EXPORT_SYMBOL_GPL(cbe_sync_irq);