| /* |
| * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c |
| * |
| * This file define the irq handler for MSP PER subsystem interrupts. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/system.h> |
| |
| #include <msp_cic_int.h> |
| #include <msp_regs.h> |
| |
| |
| /* |
| * Convenience Macro. Should be somewhere generic. |
| */ |
| #define get_current_vpe() \ |
| ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) |
| |
| #ifdef CONFIG_SMP |
| /* |
| * The PER registers must be protected from concurrent access. |
| */ |
| |
| static DEFINE_SPINLOCK(per_lock); |
| #endif |
| |
| /* ensure writes to per are completed */ |
| |
| static inline void per_wmb(void) |
| { |
| const volatile void __iomem *per_mem = PER_INT_MSK_REG; |
| volatile u32 dummy_read; |
| |
| wmb(); |
| dummy_read = __raw_readl(per_mem); |
| dummy_read++; |
| } |
| |
| static inline void unmask_per_irq(struct irq_data *d) |
| { |
| #ifdef CONFIG_SMP |
| unsigned long flags; |
| spin_lock_irqsave(&per_lock, flags); |
| *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); |
| spin_unlock_irqrestore(&per_lock, flags); |
| #else |
| *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); |
| #endif |
| per_wmb(); |
| } |
| |
| static inline void mask_per_irq(struct irq_data *d) |
| { |
| #ifdef CONFIG_SMP |
| unsigned long flags; |
| spin_lock_irqsave(&per_lock, flags); |
| *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); |
| spin_unlock_irqrestore(&per_lock, flags); |
| #else |
| *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); |
| #endif |
| per_wmb(); |
| } |
| |
| static inline void msp_per_irq_ack(struct irq_data *d) |
| { |
| mask_per_irq(d); |
| /* |
| * In the PER interrupt controller, only bits 11 and 10 |
| * are write-to-clear, (SPI TX complete, SPI RX complete). |
| * It does nothing for any others. |
| */ |
| *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE)); |
| } |
| |
| #ifdef CONFIG_SMP |
| static int msp_per_irq_set_affinity(struct irq_data *d, |
| const struct cpumask *affinity, bool force) |
| { |
| /* WTF is this doing ????? */ |
| unmask_per_irq(d); |
| return 0; |
| } |
| #endif |
| |
| static struct irq_chip msp_per_irq_controller = { |
| .name = "MSP_PER", |
| .irq_enable = unmask_per_irq, |
| .irq_disable = mask_per_irq, |
| .irq_ack = msp_per_irq_ack, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = msp_per_irq_set_affinity, |
| #endif |
| }; |
| |
| void __init msp_per_irq_init(void) |
| { |
| int i; |
| /* Mask/clear interrupts. */ |
| *PER_INT_MSK_REG = 0x00000000; |
| *PER_INT_STS_REG = 0xFFFFFFFF; |
| /* initialize all the IRQ descriptors */ |
| for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) { |
| irq_set_chip(i, &msp_per_irq_controller); |
| #ifdef CONFIG_MIPS_MT_SMTC |
| irq_hwmask[i] = C_IRQ4; |
| #endif |
| } |
| } |
| |
| void msp_per_irq_dispatch(void) |
| { |
| u32 per_mask = *PER_INT_MSK_REG; |
| u32 per_status = *PER_INT_STS_REG; |
| u32 pending; |
| |
| pending = per_status & per_mask; |
| if (pending) { |
| do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1); |
| } else { |
| spurious_interrupt(); |
| } |
| } |