| /* |
| * Individual pin assignments for the B26/S26. Notice that the |
| * actual usage of these pins depends on the PAD MUX settings, that |
| * is why the same number can potentially appear several times. |
| * In the reference design each pin is only used for one purpose. |
| * These were determined by inspecting the B26/S26 schematic: |
| * 2/1911-ROA 128 1603 |
| */ |
| #ifdef CONFIG_MACH_U300_BS2X |
| #define U300_GPIO_PIN_UART_RX 0 |
| #define U300_GPIO_PIN_UART_TX 1 |
| #define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ |
| #define U300_GPIO_PIN_CAM_SLEEP 4 |
| #define U300_GPIO_PIN_CAM_REG_EN 5 |
| #define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ |
| #define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ |
| #define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ |
| #define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ |
| #define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ |
| #define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ |
| #define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ |
| #define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ |
| #endif |
| |
| /* |
| * Individual pin assignments for the B330/S330 and B365/S365. |
| * Notice that the actual usage of these pins depends on the |
| * PAD MUX settings, that is why the same number can potentially |
| * appear several times. In the reference design each pin is only |
| * used for one purpose. These were determined by inspecting the |
| * S365 schematic. |
| */ |
| #if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ |
| defined(CONFIG_MACH_U300_BS335) |
| #define U300_GPIO_PIN_UART_RX 0 |
| #define U300_GPIO_PIN_UART_TX 1 |
| #define U300_GPIO_PIN_UART_CTS 2 |
| #define U300_GPIO_PIN_UART_RTS 3 |
| #define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ |
| #define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ |
| #define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ |
| #define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ |
| |
| #define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ |
| #define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ |
| #define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ |
| #define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ |
| #define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ |
| #define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ |
| #define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ |
| #define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ |
| #define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ |
| #define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ |
| #define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ |
| #define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ |
| |
| #ifdef CONFIG_MACH_U300_BS335 |
| |
| #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ |
| |
| #define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ |
| #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ |
| #endif |
| |
| #endif |
