| if ARCH_TEGRA |
| |
| comment "NVIDIA Tegra options" |
| |
| config ARCH_TEGRA_2x_SOC |
| bool "Enable support for Tegra20 family" |
| select CPU_V7 |
| select ARM_GIC |
| select ARCH_REQUIRE_GPIOLIB |
| select USB_ARCH_HAS_EHCI if USB_SUPPORT |
| select USB_ULPI if USB_SUPPORT |
| select USB_ULPI_VIEWPORT if USB_SUPPORT |
| help |
| Support for NVIDIA Tegra AP20 and T20 processors, based on the |
| ARM CortexA9MP CPU and the ARM PL310 L2 cache controller |
| |
| config ARCH_TEGRA_3x_SOC |
| bool "Enable support for Tegra30 family" |
| select CPU_V7 |
| select ARM_GIC |
| select ARCH_REQUIRE_GPIOLIB |
| select USB_ARCH_HAS_EHCI if USB_SUPPORT |
| select USB_ULPI if USB_SUPPORT |
| select USB_ULPI_VIEWPORT if USB_SUPPORT |
| select USE_OF |
| help |
| Support for NVIDIA Tegra T30 processor family, based on the |
| ARM CortexA9MP CPU and the ARM PL310 L2 cache controller |
| |
| config TEGRA_PCI |
| bool "PCI Express support" |
| depends on ARCH_TEGRA_2x_SOC |
| select PCI |
| |
| comment "Tegra board type" |
| |
| config MACH_HARMONY |
| bool "Harmony board" |
| depends on ARCH_TEGRA_2x_SOC |
| select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC |
| help |
| Support for nVidia Harmony development platform |
| |
| config MACH_KAEN |
| bool "Kaen board" |
| depends on ARCH_TEGRA_2x_SOC |
| select MACH_SEABOARD |
| select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC |
| help |
| Support for the Kaen version of Seaboard |
| |
| config MACH_PAZ00 |
| bool "Paz00 board" |
| depends on ARCH_TEGRA_2x_SOC |
| help |
| Support for the Toshiba AC100/Dynabook AZ netbook |
| |
| config MACH_SEABOARD |
| bool "Seaboard board" |
| depends on ARCH_TEGRA_2x_SOC |
| select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC |
| help |
| Support for nVidia Seaboard development platform. It will |
| also be included for some of the derivative boards that |
| have large similarities with the seaboard design. |
| |
| config MACH_TEGRA_DT |
| bool "Generic Tegra20 board (FDT support)" |
| depends on ARCH_TEGRA_2x_SOC |
| select USE_OF |
| help |
| Support for generic NVIDIA Tegra20 boards using Flattened Device Tree |
| |
| config MACH_TRIMSLICE |
| bool "TrimSlice board" |
| depends on ARCH_TEGRA_2x_SOC |
| select TEGRA_PCI |
| help |
| Support for CompuLab TrimSlice platform |
| |
| config MACH_WARIO |
| bool "Wario board" |
| depends on ARCH_TEGRA_2x_SOC |
| select MACH_SEABOARD |
| help |
| Support for the Wario version of Seaboard |
| |
| config MACH_VENTANA |
| bool "Ventana board" |
| depends on ARCH_TEGRA_2x_SOC |
| select MACH_TEGRA_DT |
| help |
| Support for the nVidia Ventana development platform |
| |
| choice |
| prompt "Low-level debug console UART" |
| default TEGRA_DEBUG_UART_NONE |
| |
| config TEGRA_DEBUG_UART_NONE |
| bool "None" |
| |
| config TEGRA_DEBUG_UARTA |
| bool "UART-A" |
| |
| config TEGRA_DEBUG_UARTB |
| bool "UART-B" |
| |
| config TEGRA_DEBUG_UARTC |
| bool "UART-C" |
| |
| config TEGRA_DEBUG_UARTD |
| bool "UART-D" |
| |
| config TEGRA_DEBUG_UARTE |
| bool "UART-E" |
| |
| endchoice |
| |
| config TEGRA_SYSTEM_DMA |
| bool "Enable system DMA driver for NVIDIA Tegra SoCs" |
| default y |
| help |
| Adds system DMA functionality for NVIDIA Tegra SoCs, used by |
| several Tegra device drivers |
| |
| config TEGRA_EMC_SCALING_ENABLE |
| bool "Enable scaling the memory frequency" |
| |
| endif |
