| /* |
| * Hardware definitions for Voipac PXA270 |
| * |
| * Copyright (C) 2010 |
| * Marek Vasut <marek.vasut@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/input.h> |
| #include <linux/gpio.h> |
| #include <linux/usb/gpio_vbus.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/dm9000.h> |
| #include <linux/ucb1400.h> |
| #include <linux/ata_platform.h> |
| #include <linux/regulator/max1586.h> |
| #include <linux/i2c/pxa-i2c.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| |
| #include <mach/pxa27x.h> |
| #include <mach/audio.h> |
| #include <mach/vpac270.h> |
| #include <mach/mmc.h> |
| #include <mach/pxafb.h> |
| #include <mach/ohci.h> |
| #include <mach/pxa27x-udc.h> |
| #include <mach/udc.h> |
| #include <mach/pata_pxa.h> |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| /****************************************************************************** |
| * Pin configuration |
| ******************************************************************************/ |
| static unsigned long vpac270_pin_config[] __initdata = { |
| /* MMC */ |
| GPIO32_MMC_CLK, |
| GPIO92_MMC_DAT_0, |
| GPIO109_MMC_DAT_1, |
| GPIO110_MMC_DAT_2, |
| GPIO111_MMC_DAT_3, |
| GPIO112_MMC_CMD, |
| GPIO53_GPIO, /* SD detect */ |
| GPIO52_GPIO, /* SD r/o switch */ |
| |
| /* GPIO KEYS */ |
| GPIO1_GPIO, /* USER BTN */ |
| |
| /* LEDs */ |
| GPIO15_GPIO, /* orange led */ |
| |
| /* FFUART */ |
| GPIO34_FFUART_RXD, |
| GPIO39_FFUART_TXD, |
| GPIO27_FFUART_RTS, |
| GPIO100_FFUART_CTS, |
| GPIO33_FFUART_DSR, |
| GPIO40_FFUART_DTR, |
| GPIO10_FFUART_DCD, |
| GPIO38_FFUART_RI, |
| |
| /* LCD */ |
| GPIO58_LCD_LDD_0, |
| GPIO59_LCD_LDD_1, |
| GPIO60_LCD_LDD_2, |
| GPIO61_LCD_LDD_3, |
| GPIO62_LCD_LDD_4, |
| GPIO63_LCD_LDD_5, |
| GPIO64_LCD_LDD_6, |
| GPIO65_LCD_LDD_7, |
| GPIO66_LCD_LDD_8, |
| GPIO67_LCD_LDD_9, |
| GPIO68_LCD_LDD_10, |
| GPIO69_LCD_LDD_11, |
| GPIO70_LCD_LDD_12, |
| GPIO71_LCD_LDD_13, |
| GPIO72_LCD_LDD_14, |
| GPIO73_LCD_LDD_15, |
| GPIO86_LCD_LDD_16, |
| GPIO87_LCD_LDD_17, |
| GPIO74_LCD_FCLK, |
| GPIO75_LCD_LCLK, |
| GPIO76_LCD_PCLK, |
| GPIO77_LCD_BIAS, |
| |
| /* PCMCIA */ |
| GPIO48_nPOE, |
| GPIO49_nPWE, |
| GPIO50_nPIOR, |
| GPIO51_nPIOW, |
| GPIO85_nPCE_1, |
| GPIO54_nPCE_2, |
| GPIO55_nPREG, |
| GPIO57_nIOIS16, |
| GPIO56_nPWAIT, |
| GPIO104_PSKTSEL, |
| GPIO84_GPIO, /* PCMCIA CD */ |
| GPIO35_GPIO, /* PCMCIA RDY */ |
| GPIO107_GPIO, /* PCMCIA PPEN */ |
| GPIO11_GPIO, /* PCMCIA RESET */ |
| GPIO17_GPIO, /* CF CD */ |
| GPIO12_GPIO, /* CF RDY */ |
| GPIO16_GPIO, /* CF RESET */ |
| |
| /* UHC */ |
| GPIO88_USBH1_PWR, |
| GPIO89_USBH1_PEN, |
| GPIO119_USBH2_PWR, |
| GPIO120_USBH2_PEN, |
| |
| /* UDC */ |
| GPIO41_GPIO, |
| |
| /* Ethernet */ |
| GPIO114_GPIO, /* IRQ */ |
| |
| /* AC97 */ |
| GPIO28_AC97_BITCLK, |
| GPIO29_AC97_SDATA_IN_0, |
| GPIO30_AC97_SDATA_OUT, |
| GPIO31_AC97_SYNC, |
| GPIO95_AC97_nRESET, |
| GPIO98_AC97_SYSCLK, |
| GPIO113_GPIO, /* TS IRQ */ |
| |
| /* I2C */ |
| GPIO117_I2C_SCL, |
| GPIO118_I2C_SDA, |
| |
| /* IDE */ |
| GPIO36_GPIO, /* IDE IRQ */ |
| GPIO80_DREQ_1, |
| }; |
| |
| /****************************************************************************** |
| * NOR Flash |
| ******************************************************************************/ |
| #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
| static struct mtd_partition vpac270_nor_partitions[] = { |
| { |
| .name = "Flash", |
| .offset = 0x00000000, |
| .size = MTDPART_SIZ_FULL, |
| } |
| }; |
| |
| static struct physmap_flash_data vpac270_flash_data[] = { |
| { |
| .width = 2, /* bankwidth in bytes */ |
| .parts = vpac270_nor_partitions, |
| .nr_parts = ARRAY_SIZE(vpac270_nor_partitions) |
| } |
| }; |
| |
| static struct resource vpac270_flash_resource = { |
| .start = PXA_CS0_PHYS, |
| .end = PXA_CS0_PHYS + SZ_64M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device vpac270_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .resource = &vpac270_flash_resource, |
| .num_resources = 1, |
| .dev = { |
| .platform_data = vpac270_flash_data, |
| }, |
| }; |
| static void __init vpac270_nor_init(void) |
| { |
| platform_device_register(&vpac270_flash); |
| } |
| #else |
| static inline void vpac270_nor_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * OneNAND Flash |
| ******************************************************************************/ |
| #if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) |
| static struct mtd_partition vpac270_onenand_partitions[] = { |
| { |
| .name = "Flash", |
| .offset = 0x00000000, |
| .size = MTDPART_SIZ_FULL, |
| } |
| }; |
| |
| static struct onenand_platform_data vpac270_onenand_info = { |
| .parts = vpac270_onenand_partitions, |
| .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions), |
| }; |
| |
| static struct resource vpac270_onenand_resources[] = { |
| [0] = { |
| .start = PXA_CS0_PHYS, |
| .end = PXA_CS0_PHYS + SZ_1M, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device vpac270_onenand = { |
| .name = "onenand-flash", |
| .id = -1, |
| .resource = vpac270_onenand_resources, |
| .num_resources = ARRAY_SIZE(vpac270_onenand_resources), |
| .dev = { |
| .platform_data = &vpac270_onenand_info, |
| }, |
| }; |
| |
| static void __init vpac270_onenand_init(void) |
| { |
| platform_device_register(&vpac270_onenand); |
| } |
| #else |
| static void __init vpac270_onenand_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * SD/MMC card controller |
| ******************************************************************************/ |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static struct pxamci_platform_data vpac270_mci_platform_data = { |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .gpio_power = -1, |
| .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, |
| .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, |
| .detect_delay_ms = 200, |
| }; |
| |
| static void __init vpac270_mmc_init(void) |
| { |
| pxa_set_mci_info(&vpac270_mci_platform_data); |
| } |
| #else |
| static inline void vpac270_mmc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * GPIO keys |
| ******************************************************************************/ |
| #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
| static struct gpio_keys_button vpac270_pxa_buttons[] = { |
| {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"}, |
| }; |
| |
| static struct gpio_keys_platform_data vpac270_pxa_keys_data = { |
| .buttons = vpac270_pxa_buttons, |
| .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons), |
| }; |
| |
| static struct platform_device vpac270_pxa_keys = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &vpac270_pxa_keys_data, |
| }, |
| }; |
| |
| static void __init vpac270_keys_init(void) |
| { |
| platform_device_register(&vpac270_pxa_keys); |
| } |
| #else |
| static inline void vpac270_keys_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * LED |
| ******************************************************************************/ |
| #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
| struct gpio_led vpac270_gpio_leds[] = { |
| { |
| .name = "vpac270:orange:user", |
| .default_trigger = "none", |
| .gpio = GPIO15_VPAC270_LED_ORANGE, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_led_platform_data vpac270_gpio_led_info = { |
| .leds = vpac270_gpio_leds, |
| .num_leds = ARRAY_SIZE(vpac270_gpio_leds), |
| }; |
| |
| static struct platform_device vpac270_leds = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &vpac270_gpio_led_info, |
| } |
| }; |
| |
| static void __init vpac270_leds_init(void) |
| { |
| platform_device_register(&vpac270_leds); |
| } |
| #else |
| static inline void vpac270_leds_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * USB Host |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| static int vpac270_ohci_init(struct device *dev) |
| { |
| UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; |
| return 0; |
| } |
| |
| static struct pxaohci_platform_data vpac270_ohci_info = { |
| .port_mode = PMM_PERPORT_MODE, |
| .flags = ENABLE_PORT1 | ENABLE_PORT2 | |
| POWER_CONTROL_LOW | POWER_SENSE_LOW, |
| .init = vpac270_ohci_init, |
| }; |
| |
| static void __init vpac270_uhc_init(void) |
| { |
| pxa_set_ohci_info(&vpac270_ohci_info); |
| } |
| #else |
| static inline void vpac270_uhc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * USB Gadget |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) |
| static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { |
| .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, |
| .gpio_pullup = -1, |
| }; |
| |
| static struct platform_device vpac270_gpio_vbus = { |
| .name = "gpio-vbus", |
| .id = -1, |
| .dev = { |
| .platform_data = &vpac270_gpio_vbus_info, |
| }, |
| }; |
| |
| static void vpac270_udc_command(int cmd) |
| { |
| if (cmd == PXA2XX_UDC_CMD_CONNECT) |
| UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; |
| else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) |
| UP2OCR = UP2OCR_HXOE; |
| } |
| |
| static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { |
| .udc_command = vpac270_udc_command, |
| .gpio_pullup = -1, |
| }; |
| |
| static void __init vpac270_udc_init(void) |
| { |
| pxa_set_udc_info(&vpac270_udc_info); |
| platform_device_register(&vpac270_gpio_vbus); |
| } |
| #else |
| static inline void vpac270_udc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Ethernet |
| ******************************************************************************/ |
| #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) |
| static struct resource vpac270_dm9000_resources[] = { |
| [0] = { |
| .start = PXA_CS2_PHYS + 0x300, |
| .end = PXA_CS2_PHYS + 0x303, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = PXA_CS2_PHYS + 0x304, |
| .end = PXA_CS2_PHYS + 0x343, |
| .flags = IORESOURCE_MEM, |
| }, |
| [2] = { |
| .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), |
| .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
| }, |
| }; |
| |
| static struct dm9000_plat_data vpac270_dm9000_platdata = { |
| .flags = DM9000_PLATF_32BITONLY, |
| }; |
| |
| static struct platform_device vpac270_dm9000_device = { |
| .name = "dm9000", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(vpac270_dm9000_resources), |
| .resource = vpac270_dm9000_resources, |
| .dev = { |
| .platform_data = &vpac270_dm9000_platdata, |
| } |
| }; |
| |
| static void __init vpac270_eth_init(void) |
| { |
| platform_device_register(&vpac270_dm9000_device); |
| } |
| #else |
| static inline void vpac270_eth_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Audio and Touchscreen |
| ******************************************************************************/ |
| #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ |
| defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) |
| static pxa2xx_audio_ops_t vpac270_ac97_pdata = { |
| .reset_gpio = 95, |
| }; |
| |
| static struct ucb1400_pdata vpac270_ucb1400_pdata = { |
| .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), |
| }; |
| |
| static struct platform_device vpac270_ucb1400_device = { |
| .name = "ucb1400_core", |
| .id = -1, |
| .dev = { |
| .platform_data = &vpac270_ucb1400_pdata, |
| }, |
| }; |
| |
| static void __init vpac270_ts_init(void) |
| { |
| pxa_set_ac97_info(&vpac270_ac97_pdata); |
| platform_device_register(&vpac270_ucb1400_device); |
| } |
| #else |
| static inline void vpac270_ts_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * RTC |
| ******************************************************************************/ |
| #if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) |
| static struct i2c_board_info __initdata vpac270_i2c_devs[] = { |
| { |
| I2C_BOARD_INFO("ds1339", 0x68), |
| }, |
| }; |
| |
| static void __init vpac270_rtc_init(void) |
| { |
| i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); |
| } |
| #else |
| static inline void vpac270_rtc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Framebuffer |
| ******************************************************************************/ |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
| static struct pxafb_mode_info vpac270_lcd_modes[] = { |
| { |
| .pixclock = 57692, |
| .xres = 640, |
| .yres = 480, |
| .bpp = 32, |
| .depth = 18, |
| |
| .left_margin = 144, |
| .right_margin = 32, |
| .upper_margin = 13, |
| .lower_margin = 30, |
| |
| .hsync_len = 32, |
| .vsync_len = 2, |
| |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| }, { /* CRT 640x480 */ |
| .pixclock = 35000, |
| .xres = 640, |
| .yres = 480, |
| .bpp = 16, |
| .depth = 16, |
| |
| .left_margin = 96, |
| .right_margin = 48, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| |
| .hsync_len = 48, |
| .vsync_len = 1, |
| |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| }, { /* CRT 800x600 H=30kHz V=48HZ */ |
| .pixclock = 25000, |
| .xres = 800, |
| .yres = 600, |
| .bpp = 16, |
| .depth = 16, |
| |
| .left_margin = 50, |
| .right_margin = 1, |
| .upper_margin = 21, |
| .lower_margin = 12, |
| |
| .hsync_len = 8, |
| .vsync_len = 1, |
| |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| }, { /* CRT 1024x768 H=40kHz V=50Hz */ |
| .pixclock = 15000, |
| .xres = 1024, |
| .yres = 768, |
| .bpp = 16, |
| .depth = 16, |
| |
| .left_margin = 220, |
| .right_margin = 8, |
| .upper_margin = 33, |
| .lower_margin = 2, |
| |
| .hsync_len = 48, |
| .vsync_len = 1, |
| |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| } |
| }; |
| |
| static struct pxafb_mach_info vpac270_lcd_screen = { |
| .modes = vpac270_lcd_modes, |
| .num_modes = ARRAY_SIZE(vpac270_lcd_modes), |
| .lcd_conn = LCD_COLOR_TFT_18BPP, |
| }; |
| |
| static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info) |
| { |
| gpio_set_value(GPIO81_VPAC270_BKL_ON, on); |
| } |
| |
| static void __init vpac270_lcd_init(void) |
| { |
| int ret; |
| |
| ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON"); |
| if (ret) { |
| pr_err("Requesting BKL-ON GPIO failed!\n"); |
| goto err; |
| } |
| |
| ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1); |
| if (ret) { |
| pr_err("Setting BKL-ON GPIO direction failed!\n"); |
| goto err2; |
| } |
| |
| vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; |
| pxa_set_fb_info(NULL, &vpac270_lcd_screen); |
| return; |
| |
| err2: |
| gpio_free(GPIO81_VPAC270_BKL_ON); |
| err: |
| return; |
| } |
| #else |
| static inline void vpac270_lcd_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * PATA IDE |
| ******************************************************************************/ |
| #if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE) |
| static struct pata_pxa_pdata vpac270_pata_pdata = { |
| .reg_shift = 1, |
| .dma_dreq = 1, |
| .irq_flags = IRQF_TRIGGER_RISING, |
| }; |
| |
| static struct resource vpac270_ide_resources[] = { |
| [0] = { /* I/O Base address */ |
| .start = PXA_CS3_PHYS + 0x120, |
| .end = PXA_CS3_PHYS + 0x13f, |
| .flags = IORESOURCE_MEM |
| }, |
| [1] = { /* CTL Base address */ |
| .start = PXA_CS3_PHYS + 0x15c, |
| .end = PXA_CS3_PHYS + 0x15f, |
| .flags = IORESOURCE_MEM |
| }, |
| [2] = { /* DMA Base address */ |
| .start = PXA_CS3_PHYS + 0x20, |
| .end = PXA_CS3_PHYS + 0x2f, |
| .flags = IORESOURCE_DMA |
| }, |
| [3] = { /* IDE IRQ pin */ |
| .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), |
| .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct platform_device vpac270_ide_device = { |
| .name = "pata_pxa", |
| .num_resources = ARRAY_SIZE(vpac270_ide_resources), |
| .resource = vpac270_ide_resources, |
| .dev = { |
| .platform_data = &vpac270_pata_pdata, |
| .coherent_dma_mask = 0xffffffff, |
| } |
| }; |
| |
| static void __init vpac270_ide_init(void) |
| { |
| platform_device_register(&vpac270_ide_device); |
| } |
| #else |
| static inline void vpac270_ide_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Core power regulator |
| ******************************************************************************/ |
| #if defined(CONFIG_REGULATOR_MAX1586) || \ |
| defined(CONFIG_REGULATOR_MAX1586_MODULE) |
| static struct regulator_consumer_supply vpac270_max1587a_consumers[] = { |
| { |
| .supply = "vcc_core", |
| } |
| }; |
| |
| static struct regulator_init_data vpac270_max1587a_v3_info = { |
| .constraints = { |
| .name = "vcc_core range", |
| .min_uV = 900000, |
| .max_uV = 1705000, |
| .always_on = 1, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, |
| }, |
| .consumer_supplies = vpac270_max1587a_consumers, |
| .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers), |
| }; |
| |
| static struct max1586_subdev_data vpac270_max1587a_subdevs[] = { |
| { |
| .name = "vcc_core", |
| .id = MAX1586_V3, |
| .platform_data = &vpac270_max1587a_v3_info, |
| } |
| }; |
| |
| static struct max1586_platform_data vpac270_max1587a_info = { |
| .subdevs = vpac270_max1587a_subdevs, |
| .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs), |
| .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ |
| }; |
| |
| static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = { |
| { |
| I2C_BOARD_INFO("max1586", 0x14), |
| .platform_data = &vpac270_max1587a_info, |
| }, |
| }; |
| |
| static void __init vpac270_pmic_init(void) |
| { |
| i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info)); |
| } |
| #else |
| static inline void vpac270_pmic_init(void) {} |
| #endif |
| |
| |
| /****************************************************************************** |
| * Machine init |
| ******************************************************************************/ |
| static void __init vpac270_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config)); |
| |
| pxa_set_ffuart_info(NULL); |
| pxa_set_btuart_info(NULL); |
| pxa_set_stuart_info(NULL); |
| pxa_set_i2c_info(NULL); |
| pxa27x_set_i2c_power_info(NULL); |
| |
| vpac270_pmic_init(); |
| vpac270_lcd_init(); |
| vpac270_mmc_init(); |
| vpac270_nor_init(); |
| vpac270_onenand_init(); |
| vpac270_leds_init(); |
| vpac270_keys_init(); |
| vpac270_uhc_init(); |
| vpac270_udc_init(); |
| vpac270_eth_init(); |
| vpac270_ts_init(); |
| vpac270_rtc_init(); |
| vpac270_ide_init(); |
| } |
| |
| MACHINE_START(VPAC270, "Voipac PXA270") |
| .atag_offset = 0x100, |
| .map_io = pxa27x_map_io, |
| .init_irq = pxa27x_init_irq, |
| .handle_irq = pxa27x_handle_irq, |
| .timer = &pxa_timer, |
| .init_machine = vpac270_init |
| MACHINE_END |