| /* |
| * SSM2518 amplifier audio driver |
| * |
| * Copyright 2013 Analog Devices Inc. |
| * Author: Lars-Peter Clausen <lars@metafoo.de> |
| * |
| * Licensed under the GPL-2. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_data/ssm2518.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "ssm2518.h" |
| |
| #define SSM2518_REG_POWER1 0x00 |
| #define SSM2518_REG_CLOCK 0x01 |
| #define SSM2518_REG_SAI_CTRL1 0x02 |
| #define SSM2518_REG_SAI_CTRL2 0x03 |
| #define SSM2518_REG_CHAN_MAP 0x04 |
| #define SSM2518_REG_LEFT_VOL 0x05 |
| #define SSM2518_REG_RIGHT_VOL 0x06 |
| #define SSM2518_REG_MUTE_CTRL 0x07 |
| #define SSM2518_REG_FAULT_CTRL 0x08 |
| #define SSM2518_REG_POWER2 0x09 |
| #define SSM2518_REG_DRC_1 0x0a |
| #define SSM2518_REG_DRC_2 0x0b |
| #define SSM2518_REG_DRC_3 0x0c |
| #define SSM2518_REG_DRC_4 0x0d |
| #define SSM2518_REG_DRC_5 0x0e |
| #define SSM2518_REG_DRC_6 0x0f |
| #define SSM2518_REG_DRC_7 0x10 |
| #define SSM2518_REG_DRC_8 0x11 |
| #define SSM2518_REG_DRC_9 0x12 |
| |
| #define SSM2518_POWER1_RESET BIT(7) |
| #define SSM2518_POWER1_NO_BCLK BIT(5) |
| #define SSM2518_POWER1_MCS_MASK (0xf << 1) |
| #define SSM2518_POWER1_MCS_64FS (0x0 << 1) |
| #define SSM2518_POWER1_MCS_128FS (0x1 << 1) |
| #define SSM2518_POWER1_MCS_256FS (0x2 << 1) |
| #define SSM2518_POWER1_MCS_384FS (0x3 << 1) |
| #define SSM2518_POWER1_MCS_512FS (0x4 << 1) |
| #define SSM2518_POWER1_MCS_768FS (0x5 << 1) |
| #define SSM2518_POWER1_MCS_100FS (0x6 << 1) |
| #define SSM2518_POWER1_MCS_200FS (0x7 << 1) |
| #define SSM2518_POWER1_MCS_400FS (0x8 << 1) |
| #define SSM2518_POWER1_SPWDN BIT(0) |
| |
| #define SSM2518_CLOCK_ASR BIT(0) |
| |
| #define SSM2518_SAI_CTRL1_FMT_MASK (0x3 << 5) |
| #define SSM2518_SAI_CTRL1_FMT_I2S (0x0 << 5) |
| #define SSM2518_SAI_CTRL1_FMT_LJ (0x1 << 5) |
| #define SSM2518_SAI_CTRL1_FMT_RJ_24BIT (0x2 << 5) |
| #define SSM2518_SAI_CTRL1_FMT_RJ_16BIT (0x3 << 5) |
| |
| #define SSM2518_SAI_CTRL1_SAI_MASK (0x7 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_I2S (0x0 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_TDM_2 (0x1 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_TDM_4 (0x2 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_TDM_8 (0x3 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_TDM_16 (0x4 << 2) |
| #define SSM2518_SAI_CTRL1_SAI_MONO (0x5 << 2) |
| |
| #define SSM2518_SAI_CTRL1_FS_MASK (0x3) |
| #define SSM2518_SAI_CTRL1_FS_8000_12000 (0x0) |
| #define SSM2518_SAI_CTRL1_FS_16000_24000 (0x1) |
| #define SSM2518_SAI_CTRL1_FS_32000_48000 (0x2) |
| #define SSM2518_SAI_CTRL1_FS_64000_96000 (0x3) |
| |
| #define SSM2518_SAI_CTRL2_BCLK_INTERAL BIT(7) |
| #define SSM2518_SAI_CTRL2_LRCLK_PULSE BIT(6) |
| #define SSM2518_SAI_CTRL2_LRCLK_INVERT BIT(5) |
| #define SSM2518_SAI_CTRL2_MSB BIT(4) |
| #define SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK (0x3 << 2) |
| #define SSM2518_SAI_CTRL2_SLOT_WIDTH_32 (0x0 << 2) |
| #define SSM2518_SAI_CTRL2_SLOT_WIDTH_24 (0x1 << 2) |
| #define SSM2518_SAI_CTRL2_SLOT_WIDTH_16 (0x2 << 2) |
| #define SSM2518_SAI_CTRL2_BCLK_INVERT BIT(1) |
| |
| #define SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET 4 |
| #define SSM2518_CHAN_MAP_RIGHT_SLOT_MASK 0xf0 |
| #define SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET 0 |
| #define SSM2518_CHAN_MAP_LEFT_SLOT_MASK 0x0f |
| |
| #define SSM2518_MUTE_CTRL_ANA_GAIN BIT(5) |
| #define SSM2518_MUTE_CTRL_MUTE_MASTER BIT(0) |
| |
| #define SSM2518_POWER2_APWDN BIT(0) |
| |
| #define SSM2518_DAC_MUTE BIT(6) |
| #define SSM2518_DAC_FS_MASK 0x07 |
| #define SSM2518_DAC_FS_8000 0x00 |
| #define SSM2518_DAC_FS_16000 0x01 |
| #define SSM2518_DAC_FS_32000 0x02 |
| #define SSM2518_DAC_FS_64000 0x03 |
| #define SSM2518_DAC_FS_128000 0x04 |
| |
| struct ssm2518 { |
| struct regmap *regmap; |
| bool right_j; |
| |
| unsigned int sysclk; |
| const struct snd_pcm_hw_constraint_list *constraints; |
| |
| int enable_gpio; |
| }; |
| |
| static const struct reg_default ssm2518_reg_defaults[] = { |
| { 0x00, 0x05 }, |
| { 0x01, 0x00 }, |
| { 0x02, 0x02 }, |
| { 0x03, 0x00 }, |
| { 0x04, 0x10 }, |
| { 0x05, 0x40 }, |
| { 0x06, 0x40 }, |
| { 0x07, 0x81 }, |
| { 0x08, 0x0c }, |
| { 0x09, 0x99 }, |
| { 0x0a, 0x7c }, |
| { 0x0b, 0x5b }, |
| { 0x0c, 0x57 }, |
| { 0x0d, 0x89 }, |
| { 0x0e, 0x8c }, |
| { 0x0f, 0x77 }, |
| { 0x10, 0x26 }, |
| { 0x11, 0x1c }, |
| { 0x12, 0x97 }, |
| }; |
| |
| static const DECLARE_TLV_DB_MINMAX_MUTE(ssm2518_vol_tlv, -7125, 2400); |
| static const DECLARE_TLV_DB_SCALE(ssm2518_compressor_tlv, -3400, 200, 0); |
| static const DECLARE_TLV_DB_SCALE(ssm2518_expander_tlv, -8100, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(ssm2518_noise_gate_tlv, -9600, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(ssm2518_post_drc_tlv, -2400, 300, 0); |
| |
| static const DECLARE_TLV_DB_RANGE(ssm2518_limiter_tlv, |
| 0, 7, TLV_DB_SCALE_ITEM(-2200, 200, 0), |
| 7, 15, TLV_DB_SCALE_ITEM(-800, 100, 0), |
| ); |
| |
| static const char * const ssm2518_drc_peak_detector_attack_time_text[] = { |
| "0 ms", "0.1 ms", "0.19 ms", "0.37 ms", "0.75 ms", "1.5 ms", "3 ms", |
| "6 ms", "12 ms", "24 ms", "48 ms", "96 ms", "192 ms", "384 ms", |
| "768 ms", "1536 ms", |
| }; |
| |
| static const char * const ssm2518_drc_peak_detector_release_time_text[] = { |
| "0 ms", "1.5 ms", "3 ms", "6 ms", "12 ms", "24 ms", "48 ms", "96 ms", |
| "192 ms", "384 ms", "768 ms", "1536 ms", "3072 ms", "6144 ms", |
| "12288 ms", "24576 ms" |
| }; |
| |
| static const char * const ssm2518_drc_hold_time_text[] = { |
| "0 ms", "0.67 ms", "1.33 ms", "2.67 ms", "5.33 ms", "10.66 ms", |
| "21.32 ms", "42.64 ms", "85.28 ms", "170.56 ms", "341.12 ms", |
| "682.24 ms", "1364 ms", |
| }; |
| |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_attack_time_enum, |
| SSM2518_REG_DRC_2, 4, ssm2518_drc_peak_detector_attack_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_release_time_enum, |
| SSM2518_REG_DRC_2, 0, ssm2518_drc_peak_detector_release_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_attack_time_enum, |
| SSM2518_REG_DRC_6, 4, ssm2518_drc_peak_detector_attack_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_decay_time_enum, |
| SSM2518_REG_DRC_6, 0, ssm2518_drc_peak_detector_release_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_hold_time_enum, |
| SSM2518_REG_DRC_7, 4, ssm2518_drc_hold_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_noise_gate_hold_time_enum, |
| SSM2518_REG_DRC_7, 0, ssm2518_drc_hold_time_text); |
| static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_rms_averaging_time_enum, |
| SSM2518_REG_DRC_9, 0, ssm2518_drc_peak_detector_release_time_text); |
| |
| static const struct snd_kcontrol_new ssm2518_snd_controls[] = { |
| SOC_SINGLE("Playback De-emphasis Switch", SSM2518_REG_MUTE_CTRL, |
| 4, 1, 0), |
| SOC_DOUBLE_R_TLV("Master Playback Volume", SSM2518_REG_LEFT_VOL, |
| SSM2518_REG_RIGHT_VOL, 0, 0xff, 1, ssm2518_vol_tlv), |
| SOC_DOUBLE("Master Playback Switch", SSM2518_REG_MUTE_CTRL, 2, 1, 1, 1), |
| |
| SOC_SINGLE("Amp Low Power Mode Switch", SSM2518_REG_POWER2, 4, 1, 0), |
| SOC_SINGLE("DAC Low Power Mode Switch", SSM2518_REG_POWER2, 3, 1, 0), |
| |
| SOC_SINGLE("DRC Limiter Switch", SSM2518_REG_DRC_1, 5, 1, 0), |
| SOC_SINGLE("DRC Compressor Switch", SSM2518_REG_DRC_1, 4, 1, 0), |
| SOC_SINGLE("DRC Expander Switch", SSM2518_REG_DRC_1, 3, 1, 0), |
| SOC_SINGLE("DRC Noise Gate Switch", SSM2518_REG_DRC_1, 2, 1, 0), |
| SOC_DOUBLE("DRC Switch", SSM2518_REG_DRC_1, 0, 1, 1, 0), |
| |
| SOC_SINGLE_TLV("DRC Limiter Threshold Volume", |
| SSM2518_REG_DRC_3, 4, 15, 1, ssm2518_limiter_tlv), |
| SOC_SINGLE_TLV("DRC Compressor Lower Threshold Volume", |
| SSM2518_REG_DRC_3, 0, 15, 1, ssm2518_compressor_tlv), |
| SOC_SINGLE_TLV("DRC Expander Upper Threshold Volume", SSM2518_REG_DRC_4, |
| 4, 15, 1, ssm2518_expander_tlv), |
| SOC_SINGLE_TLV("DRC Noise Gate Threshold Volume", |
| SSM2518_REG_DRC_4, 0, 15, 1, ssm2518_noise_gate_tlv), |
| SOC_SINGLE_TLV("DRC Upper Output Threshold Volume", |
| SSM2518_REG_DRC_5, 4, 15, 1, ssm2518_limiter_tlv), |
| SOC_SINGLE_TLV("DRC Lower Output Threshold Volume", |
| SSM2518_REG_DRC_5, 0, 15, 1, ssm2518_noise_gate_tlv), |
| SOC_SINGLE_TLV("DRC Post Volume", SSM2518_REG_DRC_8, |
| 2, 15, 1, ssm2518_post_drc_tlv), |
| |
| SOC_ENUM("DRC Peak Detector Attack Time", |
| ssm2518_drc_peak_detector_attack_time_enum), |
| SOC_ENUM("DRC Peak Detector Release Time", |
| ssm2518_drc_peak_detector_release_time_enum), |
| SOC_ENUM("DRC Attack Time", ssm2518_drc_attack_time_enum), |
| SOC_ENUM("DRC Decay Time", ssm2518_drc_decay_time_enum), |
| SOC_ENUM("DRC Hold Time", ssm2518_drc_hold_time_enum), |
| SOC_ENUM("DRC Noise Gate Hold Time", |
| ssm2518_drc_noise_gate_hold_time_enum), |
| SOC_ENUM("DRC RMS Averaging Time", ssm2518_drc_rms_averaging_time_enum), |
| }; |
| |
| static const struct snd_soc_dapm_widget ssm2518_dapm_widgets[] = { |
| SND_SOC_DAPM_DAC("DACL", "HiFi Playback", SSM2518_REG_POWER2, 1, 1), |
| SND_SOC_DAPM_DAC("DACR", "HiFi Playback", SSM2518_REG_POWER2, 2, 1), |
| |
| SND_SOC_DAPM_OUTPUT("OUTL"), |
| SND_SOC_DAPM_OUTPUT("OUTR"), |
| }; |
| |
| static const struct snd_soc_dapm_route ssm2518_routes[] = { |
| { "OUTL", NULL, "DACL" }, |
| { "OUTR", NULL, "DACR" }, |
| }; |
| |
| struct ssm2518_mcs_lut { |
| unsigned int rate; |
| const unsigned int *sysclks; |
| }; |
| |
| static const unsigned int ssm2518_sysclks_2048000[] = { |
| 2048000, 4096000, 8192000, 12288000, 16384000, 24576000, |
| 3200000, 6400000, 12800000, 0 |
| }; |
| |
| static const unsigned int ssm2518_sysclks_2822000[] = { |
| 2822000, 5644800, 11289600, 16934400, 22579200, 33868800, |
| 4410000, 8820000, 17640000, 0 |
| }; |
| |
| static const unsigned int ssm2518_sysclks_3072000[] = { |
| 3072000, 6144000, 12288000, 16384000, 24576000, 38864000, |
| 4800000, 9600000, 19200000, 0 |
| }; |
| |
| static const struct ssm2518_mcs_lut ssm2518_mcs_lut[] = { |
| { 8000, ssm2518_sysclks_2048000, }, |
| { 11025, ssm2518_sysclks_2822000, }, |
| { 12000, ssm2518_sysclks_3072000, }, |
| { 16000, ssm2518_sysclks_2048000, }, |
| { 24000, ssm2518_sysclks_3072000, }, |
| { 22050, ssm2518_sysclks_2822000, }, |
| { 32000, ssm2518_sysclks_2048000, }, |
| { 44100, ssm2518_sysclks_2822000, }, |
| { 48000, ssm2518_sysclks_3072000, }, |
| { 96000, ssm2518_sysclks_3072000, }, |
| }; |
| |
| static const unsigned int ssm2518_rates_2048000[] = { |
| 8000, 16000, 32000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2048000 = { |
| .list = ssm2518_rates_2048000, |
| .count = ARRAY_SIZE(ssm2518_rates_2048000), |
| }; |
| |
| static const unsigned int ssm2518_rates_2822000[] = { |
| 11025, 22050, 44100, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2822000 = { |
| .list = ssm2518_rates_2822000, |
| .count = ARRAY_SIZE(ssm2518_rates_2822000), |
| }; |
| |
| static const unsigned int ssm2518_rates_3072000[] = { |
| 12000, 24000, 48000, 96000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list ssm2518_constraints_3072000 = { |
| .list = ssm2518_rates_3072000, |
| .count = ARRAY_SIZE(ssm2518_rates_3072000), |
| }; |
| |
| static const unsigned int ssm2518_rates_12288000[] = { |
| 8000, 12000, 16000, 24000, 32000, 48000, 96000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list ssm2518_constraints_12288000 = { |
| .list = ssm2518_rates_12288000, |
| .count = ARRAY_SIZE(ssm2518_rates_12288000), |
| }; |
| |
| static unsigned int ssm2518_lookup_mcs(struct ssm2518 *ssm2518, |
| unsigned int rate) |
| { |
| const unsigned int *sysclks = NULL; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ssm2518_mcs_lut); i++) { |
| if (ssm2518_mcs_lut[i].rate == rate) { |
| sysclks = ssm2518_mcs_lut[i].sysclks; |
| break; |
| } |
| } |
| |
| if (!sysclks) |
| return -EINVAL; |
| |
| for (i = 0; sysclks[i]; i++) { |
| if (sysclks[i] == ssm2518->sysclk) |
| return i; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int ssm2518_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); |
| unsigned int rate = params_rate(params); |
| unsigned int ctrl1, ctrl1_mask; |
| int mcs; |
| int ret; |
| |
| mcs = ssm2518_lookup_mcs(ssm2518, rate); |
| if (mcs < 0) |
| return mcs; |
| |
| ctrl1_mask = SSM2518_SAI_CTRL1_FS_MASK; |
| |
| if (rate >= 8000 && rate <= 12000) |
| ctrl1 = SSM2518_SAI_CTRL1_FS_8000_12000; |
| else if (rate >= 16000 && rate <= 24000) |
| ctrl1 = SSM2518_SAI_CTRL1_FS_16000_24000; |
| else if (rate >= 32000 && rate <= 48000) |
| ctrl1 = SSM2518_SAI_CTRL1_FS_32000_48000; |
| else if (rate >= 64000 && rate <= 96000) |
| ctrl1 = SSM2518_SAI_CTRL1_FS_64000_96000; |
| else |
| return -EINVAL; |
| |
| if (ssm2518->right_j) { |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_16BIT; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| ctrl1_mask |= SSM2518_SAI_CTRL1_FMT_MASK; |
| } |
| |
| /* Disable auto samplerate detection */ |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_CLOCK, |
| SSM2518_CLOCK_ASR, SSM2518_CLOCK_ASR); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, |
| ctrl1_mask, ctrl1); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, |
| SSM2518_POWER1_MCS_MASK, mcs << 1); |
| } |
| |
| static int ssm2518_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); |
| unsigned int val; |
| |
| if (mute) |
| val = SSM2518_MUTE_CTRL_MUTE_MASTER; |
| else |
| val = 0; |
| |
| return regmap_update_bits(ssm2518->regmap, SSM2518_REG_MUTE_CTRL, |
| SSM2518_MUTE_CTRL_MUTE_MASTER, val); |
| } |
| |
| static int ssm2518_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); |
| unsigned int ctrl1 = 0, ctrl2 = 0; |
| bool invert_fclk; |
| int ret; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| invert_fclk = false; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT; |
| invert_fclk = false; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| invert_fclk = true; |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT; |
| invert_fclk = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ssm2518->right_j = false; |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ; |
| invert_fclk = !invert_fclk; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT; |
| ssm2518->right_j = true; |
| invert_fclk = !invert_fclk; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE; |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S; |
| invert_fclk = false; |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE; |
| ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ; |
| invert_fclk = false; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (invert_fclk) |
| ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_INVERT; |
| |
| ret = regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, ctrl1); |
| if (ret) |
| return ret; |
| |
| return regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, ctrl2); |
| } |
| |
| static int ssm2518_set_power(struct ssm2518 *ssm2518, bool enable) |
| { |
| int ret = 0; |
| |
| if (!enable) { |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, |
| SSM2518_POWER1_SPWDN, SSM2518_POWER1_SPWDN); |
| regcache_mark_dirty(ssm2518->regmap); |
| } |
| |
| if (gpio_is_valid(ssm2518->enable_gpio)) |
| gpio_set_value(ssm2518->enable_gpio, enable); |
| |
| regcache_cache_only(ssm2518->regmap, !enable); |
| |
| if (enable) { |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, |
| SSM2518_POWER1_SPWDN | SSM2518_POWER1_RESET, 0x00); |
| regcache_sync(ssm2518->regmap); |
| } |
| |
| return ret; |
| } |
| |
| static int ssm2518_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); |
| int ret = 0; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) |
| ret = ssm2518_set_power(ssm2518, true); |
| break; |
| case SND_SOC_BIAS_OFF: |
| ret = ssm2518_set_power(ssm2518, false); |
| break; |
| } |
| |
| if (ret) |
| return ret; |
| |
| codec->dapm.bias_level = level; |
| |
| return 0; |
| } |
| |
| static int ssm2518_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, |
| unsigned int rx_mask, int slots, int width) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); |
| unsigned int ctrl1, ctrl2; |
| int left_slot, right_slot; |
| int ret; |
| |
| if (slots == 0) |
| return regmap_update_bits(ssm2518->regmap, |
| SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK, |
| SSM2518_SAI_CTRL1_SAI_I2S); |
| |
| if (tx_mask == 0 || rx_mask != 0) |
| return -EINVAL; |
| |
| if (slots == 1) { |
| if (tx_mask != 1) |
| return -EINVAL; |
| left_slot = 0; |
| right_slot = 0; |
| } else { |
| /* We assume the left channel < right channel */ |
| left_slot = __ffs(tx_mask); |
| tx_mask &= ~(1 << left_slot); |
| if (tx_mask == 0) { |
| right_slot = left_slot; |
| } else { |
| right_slot = __ffs(tx_mask); |
| tx_mask &= ~(1 << right_slot); |
| } |
| } |
| |
| if (tx_mask != 0 || left_slot >= slots || right_slot >= slots) |
| return -EINVAL; |
| |
| switch (width) { |
| case 16: |
| ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_16; |
| break; |
| case 24: |
| ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_24; |
| break; |
| case 32: |
| ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_32; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (slots) { |
| case 1: |
| ctrl1 = SSM2518_SAI_CTRL1_SAI_MONO; |
| break; |
| case 2: |
| ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_2; |
| break; |
| case 4: |
| ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_4; |
| break; |
| case 8: |
| ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_8; |
| break; |
| case 16: |
| ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_16; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_write(ssm2518->regmap, SSM2518_REG_CHAN_MAP, |
| (left_slot << SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET) | |
| (right_slot << SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, |
| SSM2518_SAI_CTRL1_SAI_MASK, ctrl1); |
| if (ret) |
| return ret; |
| |
| return regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, |
| SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK, ctrl2); |
| } |
| |
| static int ssm2518_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); |
| |
| if (ssm2518->constraints) |
| snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, ssm2518->constraints); |
| |
| return 0; |
| } |
| |
| #define SSM2518_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) |
| |
| static const struct snd_soc_dai_ops ssm2518_dai_ops = { |
| .startup = ssm2518_startup, |
| .hw_params = ssm2518_hw_params, |
| .digital_mute = ssm2518_mute, |
| .set_fmt = ssm2518_set_dai_fmt, |
| .set_tdm_slot = ssm2518_set_tdm_slot, |
| }; |
| |
| static struct snd_soc_dai_driver ssm2518_dai = { |
| .name = "ssm2518-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_96000, |
| .formats = SSM2518_FORMATS, |
| }, |
| .ops = &ssm2518_dai_ops, |
| }; |
| |
| static int ssm2518_probe(struct snd_soc_codec *codec) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); |
| int ret; |
| |
| codec->control_data = ssm2518->regmap; |
| ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
| return ret; |
| } |
| |
| return ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| } |
| |
| static int ssm2518_remove(struct snd_soc_codec *codec) |
| { |
| ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| return 0; |
| } |
| |
| static int ssm2518_set_sysclk(struct snd_soc_codec *codec, int clk_id, |
| int source, unsigned int freq, int dir) |
| { |
| struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); |
| unsigned int val; |
| |
| if (clk_id != SSM2518_SYSCLK) |
| return -EINVAL; |
| |
| switch (source) { |
| case SSM2518_SYSCLK_SRC_MCLK: |
| val = 0; |
| break; |
| case SSM2518_SYSCLK_SRC_BCLK: |
| /* In this case the bitclock is used as the system clock, and |
| * the bitclock signal needs to be connected to the MCLK pin and |
| * the BCLK pin is left unconnected */ |
| val = SSM2518_POWER1_NO_BCLK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (freq) { |
| case 0: |
| ssm2518->constraints = NULL; |
| break; |
| case 2048000: |
| case 4096000: |
| case 8192000: |
| case 3200000: |
| case 6400000: |
| case 12800000: |
| ssm2518->constraints = &ssm2518_constraints_2048000; |
| break; |
| case 2822000: |
| case 5644800: |
| case 11289600: |
| case 16934400: |
| case 22579200: |
| case 33868800: |
| case 4410000: |
| case 8820000: |
| case 17640000: |
| ssm2518->constraints = &ssm2518_constraints_2822000; |
| break; |
| case 3072000: |
| case 6144000: |
| case 38864000: |
| case 4800000: |
| case 9600000: |
| case 19200000: |
| ssm2518->constraints = &ssm2518_constraints_3072000; |
| break; |
| case 12288000: |
| case 16384000: |
| case 24576000: |
| ssm2518->constraints = &ssm2518_constraints_12288000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ssm2518->sysclk = freq; |
| |
| return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, |
| SSM2518_POWER1_NO_BCLK, val); |
| } |
| |
| static struct snd_soc_codec_driver ssm2518_codec_driver = { |
| .probe = ssm2518_probe, |
| .remove = ssm2518_remove, |
| .set_bias_level = ssm2518_set_bias_level, |
| .set_sysclk = ssm2518_set_sysclk, |
| .idle_bias_off = true, |
| |
| .controls = ssm2518_snd_controls, |
| .num_controls = ARRAY_SIZE(ssm2518_snd_controls), |
| .dapm_widgets = ssm2518_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(ssm2518_dapm_widgets), |
| .dapm_routes = ssm2518_routes, |
| .num_dapm_routes = ARRAY_SIZE(ssm2518_routes), |
| }; |
| |
| static bool ssm2518_register_volatile(struct device *dev, unsigned int reg) |
| { |
| return false; |
| } |
| |
| static const struct regmap_config ssm2518_regmap_config = { |
| .val_bits = 8, |
| .reg_bits = 8, |
| |
| .max_register = SSM2518_REG_DRC_9, |
| .volatile_reg = ssm2518_register_volatile, |
| |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = ssm2518_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(ssm2518_reg_defaults), |
| }; |
| |
| static int ssm2518_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct ssm2518_platform_data *pdata = i2c->dev.platform_data; |
| struct ssm2518 *ssm2518; |
| int ret; |
| |
| ssm2518 = devm_kzalloc(&i2c->dev, sizeof(*ssm2518), GFP_KERNEL); |
| if (ssm2518 == NULL) |
| return -ENOMEM; |
| |
| if (pdata) { |
| ssm2518->enable_gpio = pdata->enable_gpio; |
| } else if (i2c->dev.of_node) { |
| ssm2518->enable_gpio = of_get_gpio(i2c->dev.of_node, 0); |
| if (ssm2518->enable_gpio < 0 && ssm2518->enable_gpio != -ENOENT) |
| return ssm2518->enable_gpio; |
| } else { |
| ssm2518->enable_gpio = -1; |
| } |
| |
| if (gpio_is_valid(ssm2518->enable_gpio)) { |
| ret = devm_gpio_request_one(&i2c->dev, ssm2518->enable_gpio, |
| GPIOF_OUT_INIT_HIGH, "SSM2518 nSD"); |
| if (ret) |
| return ret; |
| } |
| |
| i2c_set_clientdata(i2c, ssm2518); |
| |
| ssm2518->regmap = devm_regmap_init_i2c(i2c, &ssm2518_regmap_config); |
| if (IS_ERR(ssm2518->regmap)) |
| return PTR_ERR(ssm2518->regmap); |
| |
| /* |
| * The reset bit is obviously volatile, but we need to be able to cache |
| * the other bits in the register, so we can't just mark the whole |
| * register as volatile. Since this is the only place where we'll ever |
| * touch the reset bit just bypass the cache for this operation. |
| */ |
| regcache_cache_bypass(ssm2518->regmap, true); |
| ret = regmap_write(ssm2518->regmap, SSM2518_REG_POWER1, |
| SSM2518_POWER1_RESET); |
| regcache_cache_bypass(ssm2518->regmap, false); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER2, |
| SSM2518_POWER2_APWDN, 0x00); |
| if (ret) |
| return ret; |
| |
| ret = ssm2518_set_power(ssm2518, false); |
| if (ret) |
| return ret; |
| |
| return snd_soc_register_codec(&i2c->dev, &ssm2518_codec_driver, |
| &ssm2518_dai, 1); |
| } |
| |
| static int ssm2518_i2c_remove(struct i2c_client *client) |
| { |
| snd_soc_unregister_codec(&client->dev); |
| return 0; |
| } |
| |
| static const struct i2c_device_id ssm2518_i2c_ids[] = { |
| { "ssm2518", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ssm2518_i2c_ids); |
| |
| static struct i2c_driver ssm2518_driver = { |
| .driver = { |
| .name = "ssm2518", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ssm2518_i2c_probe, |
| .remove = ssm2518_i2c_remove, |
| .id_table = ssm2518_i2c_ids, |
| }; |
| module_i2c_driver(ssm2518_driver); |
| |
| MODULE_DESCRIPTION("ASoC SSM2518 driver"); |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_LICENSE("GPL"); |