| if ARCH_KIRKWOOD |
| |
| menu "Marvell Kirkwood Implementations" |
| |
| config KIRKWOOD_LEGACY |
| bool |
| |
| config MACH_D2NET_V2 |
| bool "LaCie d2 Network v2 NAS Board" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| LaCie d2 Network v2 NAS. |
| |
| config MACH_NET2BIG_V2 |
| bool "LaCie 2Big Network v2 NAS Board" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| LaCie 2Big Network v2 NAS. |
| |
| config MACH_NET5BIG_V2 |
| bool "LaCie 5Big Network v2 NAS Board" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| LaCie 5Big Network v2 NAS. |
| |
| config MACH_OPENRD |
| select KIRKWOOD_LEGACY |
| bool |
| |
| config MACH_OPENRD_BASE |
| bool "Marvell OpenRD Base Board" |
| select MACH_OPENRD |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell OpenRD Base Board. |
| |
| config MACH_OPENRD_CLIENT |
| bool "Marvell OpenRD Client Board" |
| select MACH_OPENRD |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell OpenRD Client Board. |
| |
| config MACH_OPENRD_ULTIMATE |
| bool "Marvell OpenRD Ultimate Board" |
| select MACH_OPENRD |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell OpenRD Ultimate Board. |
| |
| config MACH_RD88F6192_NAS |
| bool "Marvell RD-88F6192-NAS Reference Board" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell RD-88F6192-NAS Reference Board. |
| |
| config MACH_RD88F6281 |
| bool "Marvell RD-88F6281 Reference Board" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell RD-88F6281 Reference Board. |
| |
| config MACH_T5325 |
| bool "HP t5325 Thin Client" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| HP t5325 Thin Client. |
| |
| config MACH_TS219 |
| bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and |
| TS-219P+ Turbo NAS devices. |
| |
| config MACH_TS41X |
| bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" |
| select KIRKWOOD_LEGACY |
| help |
| Say 'Y' here if you want your kernel to support the |
| QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo |
| NAS devices. |
| |
| comment "Device tree entries" |
| |
| config ARCH_KIRKWOOD_DT |
| bool "Marvell Kirkwood Flattened Device Tree" |
| select KIRKWOOD_CLK |
| select OF_IRQ |
| select ORION_IRQCHIP |
| select ORION_TIMER |
| select POWER_SUPPLY |
| select POWER_RESET |
| select POWER_RESET_GPIO |
| select REGULATOR |
| select REGULATOR_FIXED_VOLTAGE |
| select USE_OF |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell Kirkwood using flattened device tree. |
| |
| config MACH_MV88F6281GTW_GE_DT |
| bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" |
| depends on ARCH_KIRKWOOD_DT |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell 88F6281 GTW GE Board (Flattened Device Tree). |
| |
| endmenu |
| |
| endif |
