| /* |
| * Copyright 2013 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| /include/ "sun5i-a10s.dtsi" |
| |
| / { |
| model = "Olimex A10s-Olinuxino Micro"; |
| compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; |
| |
| soc@01c00000 { |
| emac: ethernet@01c0b000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emac_pins_a>; |
| phy = <&phy1>; |
| status = "okay"; |
| }; |
| |
| mdio@01c0b080 { |
| status = "okay"; |
| |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| pinctrl@01c20800 { |
| led_pins_olinuxino: led_pins@0 { |
| allwinner,pins = "PE3"; |
| allwinner,function = "gpio_out"; |
| allwinner,drive = <1>; |
| allwinner,pull = <0>; |
| }; |
| }; |
| |
| uart0: serial@01c28000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins_a>; |
| status = "okay"; |
| }; |
| |
| uart2: serial@01c28800 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins_a>; |
| status = "okay"; |
| }; |
| |
| uart3: serial@01c28c00 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins_a>; |
| status = "okay"; |
| }; |
| |
| i2c0: i2c@01c2ac00 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins_a>; |
| status = "okay"; |
| }; |
| |
| i2c1: i2c@01c2b000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins_a>; |
| status = "okay"; |
| |
| at24@50 { |
| compatible = "at,24c16"; |
| pagesize = <16>; |
| reg = <0x50>; |
| read-only; |
| }; |
| }; |
| |
| i2c2: i2c@01c2b400 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins_a>; |
| status = "okay"; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&led_pins_olinuxino>; |
| |
| green { |
| label = "a10s-olinuxino-micro:green:usr"; |
| gpios = <&pio 4 3 0>; |
| default-state = "on"; |
| }; |
| }; |
| }; |