| /* |
| * Allwinner A1X SoCs timer handling. |
| * |
| * Copyright (C) 2012 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * Based on code from |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Benn Huang <benn@allwinnertech.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/irqreturn.h> |
| #include <linux/sched_clock.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| |
| #define TIMER_IRQ_EN_REG 0x00 |
| #define TIMER_IRQ_EN(val) BIT(val) |
| #define TIMER_IRQ_ST_REG 0x04 |
| #define TIMER_CTL_REG(val) (0x10 * val + 0x10) |
| #define TIMER_CTL_ENABLE BIT(0) |
| #define TIMER_CTL_RELOAD BIT(1) |
| #define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2) |
| #define TIMER_CTL_CLK_SRC_OSC24M (1) |
| #define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) |
| #define TIMER_CTL_ONESHOT BIT(7) |
| #define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14) |
| #define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18) |
| |
| #define TIMER_SYNC_TICKS 3 |
| |
| static void __iomem *timer_base; |
| static u32 ticks_per_jiffy; |
| |
| /* |
| * When we disable a timer, we need to wait at least for 2 cycles of |
| * the timer source clock. We will use for that the clocksource timer |
| * that is already setup and runs at the same frequency than the other |
| * timers, and we never will be disabled. |
| */ |
| static void sun4i_clkevt_sync(void) |
| { |
| u32 old = readl(timer_base + TIMER_CNTVAL_REG(1)); |
| |
| while ((old - readl(timer_base + TIMER_CNTVAL_REG(1))) < TIMER_SYNC_TICKS) |
| cpu_relax(); |
| } |
| |
| static void sun4i_clkevt_time_stop(u8 timer) |
| { |
| u32 val = readl(timer_base + TIMER_CTL_REG(timer)); |
| writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); |
| sun4i_clkevt_sync(); |
| } |
| |
| static void sun4i_clkevt_time_setup(u8 timer, unsigned long delay) |
| { |
| writel(delay, timer_base + TIMER_INTVAL_REG(timer)); |
| } |
| |
| static void sun4i_clkevt_time_start(u8 timer, bool periodic) |
| { |
| u32 val = readl(timer_base + TIMER_CTL_REG(timer)); |
| |
| if (periodic) |
| val &= ~TIMER_CTL_ONESHOT; |
| else |
| val |= TIMER_CTL_ONESHOT; |
| |
| writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, |
| timer_base + TIMER_CTL_REG(timer)); |
| } |
| |
| static void sun4i_clkevt_mode(enum clock_event_mode mode, |
| struct clock_event_device *clk) |
| { |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| sun4i_clkevt_time_stop(0); |
| sun4i_clkevt_time_setup(0, ticks_per_jiffy); |
| sun4i_clkevt_time_start(0, true); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| sun4i_clkevt_time_stop(0); |
| sun4i_clkevt_time_start(0, false); |
| break; |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| default: |
| sun4i_clkevt_time_stop(0); |
| break; |
| } |
| } |
| |
| static int sun4i_clkevt_next_event(unsigned long evt, |
| struct clock_event_device *unused) |
| { |
| sun4i_clkevt_time_stop(0); |
| sun4i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); |
| sun4i_clkevt_time_start(0, false); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device sun4i_clockevent = { |
| .name = "sun4i_tick", |
| .rating = 300, |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .set_mode = sun4i_clkevt_mode, |
| .set_next_event = sun4i_clkevt_next_event, |
| }; |
| |
| |
| static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = (struct clock_event_device *)dev_id; |
| |
| writel(0x1, timer_base + TIMER_IRQ_ST_REG); |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction sun4i_timer_irq = { |
| .name = "sun4i_timer0", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = sun4i_timer_interrupt, |
| .dev_id = &sun4i_clockevent, |
| }; |
| |
| static u32 sun4i_timer_sched_read(void) |
| { |
| return ~readl(timer_base + TIMER_CNTVAL_REG(1)); |
| } |
| |
| static void __init sun4i_timer_init(struct device_node *node) |
| { |
| unsigned long rate = 0; |
| struct clk *clk; |
| int ret, irq; |
| u32 val; |
| |
| timer_base = of_iomap(node, 0); |
| if (!timer_base) |
| panic("Can't map registers"); |
| |
| irq = irq_of_parse_and_map(node, 0); |
| if (irq <= 0) |
| panic("Can't parse IRQ"); |
| |
| clk = of_clk_get(node, 0); |
| if (IS_ERR(clk)) |
| panic("Can't get timer clock"); |
| clk_prepare_enable(clk); |
| |
| rate = clk_get_rate(clk); |
| |
| writel(~0, timer_base + TIMER_INTVAL_REG(1)); |
| writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD | |
| TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), |
| timer_base + TIMER_CTL_REG(1)); |
| |
| setup_sched_clock(sun4i_timer_sched_read, 32, rate); |
| clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name, |
| rate, 300, 32, clocksource_mmio_readl_down); |
| |
| ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); |
| |
| writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), |
| timer_base + TIMER_CTL_REG(0)); |
| |
| /* Make sure timer is stopped before playing with interrupts */ |
| sun4i_clkevt_time_stop(0); |
| |
| ret = setup_irq(irq, &sun4i_timer_irq); |
| if (ret) |
| pr_warn("failed to setup irq %d\n", irq); |
| |
| /* Enable timer0 interrupt */ |
| val = readl(timer_base + TIMER_IRQ_EN_REG); |
| writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); |
| |
| sun4i_clockevent.cpumask = cpumask_of(0); |
| |
| clockevents_config_and_register(&sun4i_clockevent, rate, |
| TIMER_SYNC_TICKS, 0xffffffff); |
| } |
| CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer", |
| sun4i_timer_init); |