| /* |
| * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller |
| * |
| * GRUSBHC is typically found on LEON/GRLIB SoCs |
| * |
| * (c) Jan Andersson <jan@gaisler.com> |
| * |
| * Based on ehci-ppc-of.c which is: |
| * (c) Valentine Barshak <vbarshak@ru.mvista.com> |
| * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> |
| * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/signal.h> |
| |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| |
| #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ |
| |
| static const struct hc_driver ehci_grlib_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "GRLIB GRUSBHC EHCI", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = ehci_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = ehci_setup, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .endpoint_reset = ehci_endpoint_reset, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ehci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| #ifdef CONFIG_PM |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| #endif |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| }; |
| |
| |
| static int ehci_hcd_grlib_probe(struct platform_device *op) |
| { |
| struct device_node *dn = op->dev.of_node; |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci = NULL; |
| struct resource res; |
| u32 hc_capbase; |
| int irq; |
| int rv; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n"); |
| |
| rv = of_address_to_resource(dn, 0, &res); |
| if (rv) |
| return rv; |
| |
| /* usb_create_hcd requires dma_mask != NULL */ |
| op->dev.dma_mask = &op->dev.coherent_dma_mask; |
| hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev, |
| "GRUSBHC EHCI USB"); |
| if (!hcd) |
| return -ENOMEM; |
| |
| hcd->rsrc_start = res.start; |
| hcd->rsrc_len = resource_size(&res); |
| |
| irq = irq_of_parse_and_map(dn, 0); |
| if (irq == NO_IRQ) { |
| printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); |
| rv = -EBUSY; |
| goto err_irq; |
| } |
| |
| hcd->regs = devm_ioremap_resource(&op->dev, &res); |
| if (IS_ERR(hcd->regs)) { |
| rv = PTR_ERR(hcd->regs); |
| goto err_ioremap; |
| } |
| |
| ehci = hcd_to_ehci(hcd); |
| |
| ehci->caps = hcd->regs; |
| |
| /* determine endianness of this implementation */ |
| hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase); |
| if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) { |
| ehci->big_endian_mmio = 1; |
| ehci->big_endian_desc = 1; |
| ehci->big_endian_capbase = 1; |
| } |
| |
| rv = usb_add_hcd(hcd, irq, 0); |
| if (rv) |
| goto err_ioremap; |
| |
| return 0; |
| |
| err_ioremap: |
| irq_dispose_mapping(irq); |
| err_irq: |
| usb_put_hcd(hcd); |
| |
| return rv; |
| } |
| |
| |
| static int ehci_hcd_grlib_remove(struct platform_device *op) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(op); |
| |
| dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n"); |
| |
| usb_remove_hcd(hcd); |
| |
| irq_dispose_mapping(hcd->irq); |
| |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| |
| static const struct of_device_id ehci_hcd_grlib_of_match[] = { |
| { |
| .name = "GAISLER_EHCI", |
| }, |
| { |
| .name = "01_026", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match); |
| |
| |
| static struct platform_driver ehci_grlib_driver = { |
| .probe = ehci_hcd_grlib_probe, |
| .remove = ehci_hcd_grlib_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "grlib-ehci", |
| .owner = THIS_MODULE, |
| .of_match_table = ehci_hcd_grlib_of_match, |
| }, |
| }; |