| /* |
| * driver/usb/gadget/fsl_qe_udc.c |
| * |
| * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Xie Xiaobo <X.Xie@freescale.com> |
| * Li Yang <leoli@freescale.com> |
| * Based on bareboard code from Shlomi Gridish. |
| * |
| * Description: |
| * Freescle QE/CPM USB Pheripheral Controller Driver |
| * The controller can be found on MPC8360, MPC8272, and etc. |
| * MPC8360 Rev 1.1 may need QE mircocode update |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #undef USB_TRACE |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/moduleparam.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include <asm/qe.h> |
| #include <asm/cpm.h> |
| #include <asm/dma.h> |
| #include <asm/reg.h> |
| #include "fsl_qe_udc.h" |
| |
| #define DRIVER_DESC "Freescale QE/CPM USB Device Controller driver" |
| #define DRIVER_AUTHOR "Xie XiaoBo" |
| #define DRIVER_VERSION "1.0" |
| |
| #define DMA_ADDR_INVALID (~(dma_addr_t)0) |
| |
| static const char driver_name[] = "fsl_qe_udc"; |
| static const char driver_desc[] = DRIVER_DESC; |
| |
| /*ep name is important in gadget, it should obey the convention of ep_match()*/ |
| static const char *const ep_name[] = { |
| "ep0-control", /* everyone has ep0 */ |
| /* 3 configurable endpoints */ |
| "ep1", |
| "ep2", |
| "ep3", |
| }; |
| |
| static struct usb_endpoint_descriptor qe_ep0_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = 0, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, |
| }; |
| |
| /******************************************************************** |
| * Internal Used Function Start |
| ********************************************************************/ |
| /*----------------------------------------------------------------- |
| * done() - retire a request; caller blocked irqs |
| *--------------------------------------------------------------*/ |
| static void done(struct qe_ep *ep, struct qe_req *req, int status) |
| { |
| struct qe_udc *udc = ep->udc; |
| unsigned char stopped = ep->stopped; |
| |
| /* the req->queue pointer is used by ep_queue() func, in which |
| * the request will be added into a udc_ep->queue 'd tail |
| * so here the req will be dropped from the ep->queue |
| */ |
| list_del_init(&req->queue); |
| |
| /* req.status should be set as -EINPROGRESS in ep_queue() */ |
| if (req->req.status == -EINPROGRESS) |
| req->req.status = status; |
| else |
| status = req->req.status; |
| |
| if (req->mapped) { |
| dma_unmap_single(udc->gadget.dev.parent, |
| req->req.dma, req->req.length, |
| ep_is_in(ep) |
| ? DMA_TO_DEVICE |
| : DMA_FROM_DEVICE); |
| req->req.dma = DMA_ADDR_INVALID; |
| req->mapped = 0; |
| } else |
| dma_sync_single_for_cpu(udc->gadget.dev.parent, |
| req->req.dma, req->req.length, |
| ep_is_in(ep) |
| ? DMA_TO_DEVICE |
| : DMA_FROM_DEVICE); |
| |
| if (status && (status != -ESHUTDOWN)) |
| dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n", |
| ep->ep.name, &req->req, status, |
| req->req.actual, req->req.length); |
| |
| /* don't modify queue heads during completion callback */ |
| ep->stopped = 1; |
| spin_unlock(&udc->lock); |
| |
| /* this complete() should a func implemented by gadget layer, |
| * eg fsg->bulk_in_complete() */ |
| if (req->req.complete) |
| req->req.complete(&ep->ep, &req->req); |
| |
| spin_lock(&udc->lock); |
| |
| ep->stopped = stopped; |
| } |
| |
| /*----------------------------------------------------------------- |
| * nuke(): delete all requests related to this ep |
| *--------------------------------------------------------------*/ |
| static void nuke(struct qe_ep *ep, int status) |
| { |
| /* Whether this eq has request linked */ |
| while (!list_empty(&ep->queue)) { |
| struct qe_req *req = NULL; |
| req = list_entry(ep->queue.next, struct qe_req, queue); |
| |
| done(ep, req, status); |
| } |
| } |
| |
| /*---------------------------------------------------------------------------* |
| * USB and Endpoint manipulate process, include parameter and register * |
| *---------------------------------------------------------------------------*/ |
| /* @value: 1--set stall 0--clean stall */ |
| static int qe_eprx_stall_change(struct qe_ep *ep, int value) |
| { |
| u16 tem_usep; |
| u8 epnum = ep->epnum; |
| struct qe_udc *udc = ep->udc; |
| |
| tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); |
| tem_usep = tem_usep & ~USB_RHS_MASK; |
| if (value == 1) |
| tem_usep |= USB_RHS_STALL; |
| else if (ep->dir == USB_DIR_IN) |
| tem_usep |= USB_RHS_IGNORE_OUT; |
| |
| out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); |
| return 0; |
| } |
| |
| static int qe_eptx_stall_change(struct qe_ep *ep, int value) |
| { |
| u16 tem_usep; |
| u8 epnum = ep->epnum; |
| struct qe_udc *udc = ep->udc; |
| |
| tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); |
| tem_usep = tem_usep & ~USB_THS_MASK; |
| if (value == 1) |
| tem_usep |= USB_THS_STALL; |
| else if (ep->dir == USB_DIR_OUT) |
| tem_usep |= USB_THS_IGNORE_IN; |
| |
| out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); |
| |
| return 0; |
| } |
| |
| static int qe_ep0_stall(struct qe_udc *udc) |
| { |
| qe_eptx_stall_change(&udc->eps[0], 1); |
| qe_eprx_stall_change(&udc->eps[0], 1); |
| udc->ep0_state = WAIT_FOR_SETUP; |
| udc->ep0_dir = 0; |
| return 0; |
| } |
| |
| static int qe_eprx_nack(struct qe_ep *ep) |
| { |
| u8 epnum = ep->epnum; |
| struct qe_udc *udc = ep->udc; |
| |
| if (ep->state == EP_STATE_IDLE) { |
| /* Set the ep's nack */ |
| clrsetbits_be16(&udc->usb_regs->usb_usep[epnum], |
| USB_RHS_MASK, USB_RHS_NACK); |
| |
| /* Mask Rx and Busy interrupts */ |
| clrbits16(&udc->usb_regs->usb_usbmr, |
| (USB_E_RXB_MASK | USB_E_BSY_MASK)); |
| |
| ep->state = EP_STATE_NACK; |
| } |
| return 0; |
| } |
| |
| static int qe_eprx_normal(struct qe_ep *ep) |
| { |
| struct qe_udc *udc = ep->udc; |
| |
| if (ep->state == EP_STATE_NACK) { |
| clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum], |
| USB_RTHS_MASK, USB_THS_IGNORE_IN); |
| |
| /* Unmask RX interrupts */ |
| out_be16(&udc->usb_regs->usb_usber, |
| USB_E_BSY_MASK | USB_E_RXB_MASK); |
| setbits16(&udc->usb_regs->usb_usbmr, |
| (USB_E_RXB_MASK | USB_E_BSY_MASK)); |
| |
| ep->state = EP_STATE_IDLE; |
| ep->has_data = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int qe_ep_cmd_stoptx(struct qe_ep *ep) |
| { |
| if (ep->udc->soc_type == PORT_CPM) |
| cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT), |
| CPM_USB_STOP_TX_OPCODE); |
| else |
| qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, |
| ep->epnum, 0); |
| |
| return 0; |
| } |
| |
| static int qe_ep_cmd_restarttx(struct qe_ep *ep) |
| { |
| if (ep->udc->soc_type == PORT_CPM) |
| cpm_command(CPM_USB_RESTART_TX | (ep->epnum << |
| CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE); |
| else |
| qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, |
| ep->epnum, 0); |
| |
| return 0; |
| } |
| |
| static int qe_ep_flushtxfifo(struct qe_ep *ep) |
| { |
| struct qe_udc *udc = ep->udc; |
| int i; |
| |
| i = (int)ep->epnum; |
| |
| qe_ep_cmd_stoptx(ep); |
| out_8(&udc->usb_regs->usb_uscom, |
| USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); |
| out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase)); |
| out_be32(&udc->ep_param[i]->tstate, 0); |
| out_be16(&udc->ep_param[i]->tbcnt, 0); |
| |
| ep->c_txbd = ep->txbase; |
| ep->n_txbd = ep->txbase; |
| qe_ep_cmd_restarttx(ep); |
| return 0; |
| } |
| |
| static int qe_ep_filltxfifo(struct qe_ep *ep) |
| { |
| struct qe_udc *udc = ep->udc; |
| |
| out_8(&udc->usb_regs->usb_uscom, |
| USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); |
| return 0; |
| } |
| |
| static int qe_epbds_reset(struct qe_udc *udc, int pipe_num) |
| { |
| struct qe_ep *ep; |
| u32 bdring_len; |
| struct qe_bd __iomem *bd; |
| int i; |
| |
| ep = &udc->eps[pipe_num]; |
| |
| if (ep->dir == USB_DIR_OUT) |
| bdring_len = USB_BDRING_LEN_RX; |
| else |
| bdring_len = USB_BDRING_LEN; |
| |
| bd = ep->rxbase; |
| for (i = 0; i < (bdring_len - 1); i++) { |
| out_be32((u32 __iomem *)bd, R_E | R_I); |
| bd++; |
| } |
| out_be32((u32 __iomem *)bd, R_E | R_I | R_W); |
| |
| bd = ep->txbase; |
| for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { |
| out_be32(&bd->buf, 0); |
| out_be32((u32 __iomem *)bd, 0); |
| bd++; |
| } |
| out_be32((u32 __iomem *)bd, T_W); |
| |
| return 0; |
| } |
| |
| static int qe_ep_reset(struct qe_udc *udc, int pipe_num) |
| { |
| struct qe_ep *ep; |
| u16 tmpusep; |
| |
| ep = &udc->eps[pipe_num]; |
| tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]); |
| tmpusep &= ~USB_RTHS_MASK; |
| |
| switch (ep->dir) { |
| case USB_DIR_BOTH: |
| qe_ep_flushtxfifo(ep); |
| break; |
| case USB_DIR_OUT: |
| tmpusep |= USB_THS_IGNORE_IN; |
| break; |
| case USB_DIR_IN: |
| qe_ep_flushtxfifo(ep); |
| tmpusep |= USB_RHS_IGNORE_OUT; |
| break; |
| default: |
| break; |
| } |
| out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep); |
| |
| qe_epbds_reset(udc, pipe_num); |
| |
| return 0; |
| } |
| |
| static int qe_ep_toggledata01(struct qe_ep *ep) |
| { |
| ep->data01 ^= 0x1; |
| return 0; |
| } |
| |
| static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num) |
| { |
| struct qe_ep *ep = &udc->eps[pipe_num]; |
| unsigned long tmp_addr = 0; |
| struct usb_ep_para __iomem *epparam; |
| int i; |
| struct qe_bd __iomem *bd; |
| int bdring_len; |
| |
| if (ep->dir == USB_DIR_OUT) |
| bdring_len = USB_BDRING_LEN_RX; |
| else |
| bdring_len = USB_BDRING_LEN; |
| |
| epparam = udc->ep_param[pipe_num]; |
| /* alloc multi-ram for BD rings and set the ep parameters */ |
| tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len + |
| USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD); |
| if (IS_ERR_VALUE(tmp_addr)) |
| return -ENOMEM; |
| |
| out_be16(&epparam->rbase, (u16)tmp_addr); |
| out_be16(&epparam->tbase, (u16)(tmp_addr + |
| (sizeof(struct qe_bd) * bdring_len))); |
| |
| out_be16(&epparam->rbptr, in_be16(&epparam->rbase)); |
| out_be16(&epparam->tbptr, in_be16(&epparam->tbase)); |
| |
| ep->rxbase = cpm_muram_addr(tmp_addr); |
| ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd) |
| * bdring_len)); |
| ep->n_rxbd = ep->rxbase; |
| ep->e_rxbd = ep->rxbase; |
| ep->n_txbd = ep->txbase; |
| ep->c_txbd = ep->txbase; |
| ep->data01 = 0; /* data0 */ |
| |
| /* Init TX and RX bds */ |
| bd = ep->rxbase; |
| for (i = 0; i < bdring_len - 1; i++) { |
| out_be32(&bd->buf, 0); |
| out_be32((u32 __iomem *)bd, 0); |
| bd++; |
| } |
| out_be32(&bd->buf, 0); |
| out_be32((u32 __iomem *)bd, R_W); |
| |
| bd = ep->txbase; |
| for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { |
| out_be32(&bd->buf, 0); |
| out_be32((u32 __iomem *)bd, 0); |
| bd++; |
| } |
| out_be32(&bd->buf, 0); |
| out_be32((u32 __iomem *)bd, T_W); |
| |
| return 0; |
| } |
| |
| static int qe_ep_rxbd_update(struct qe_ep *ep) |
| { |
| unsigned int size; |
| int i; |
| unsigned int tmp; |
| struct qe_bd __iomem *bd; |
| unsigned int bdring_len; |
| |
| if (ep->rxbase == NULL) |
| return -EINVAL; |
| |
| bd = ep->rxbase; |
| |
| ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC); |
| if (ep->rxframe == NULL) { |
| dev_err(ep->udc->dev, "malloc rxframe failed\n"); |
| return -ENOMEM; |
| } |
| |
| qe_frame_init(ep->rxframe); |
| |
| if (ep->dir == USB_DIR_OUT) |
| bdring_len = USB_BDRING_LEN_RX; |
| else |
| bdring_len = USB_BDRING_LEN; |
| |
| size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1); |
| ep->rxbuffer = kzalloc(size, GFP_ATOMIC); |
| if (ep->rxbuffer == NULL) { |
| dev_err(ep->udc->dev, "malloc rxbuffer failed,size=%d\n", |
| size); |
| kfree(ep->rxframe); |
| return -ENOMEM; |
| } |
| |
| ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer); |
| if (ep->rxbuf_d == DMA_ADDR_INVALID) { |
| ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent, |
| ep->rxbuffer, |
| size, |
| DMA_FROM_DEVICE); |
| ep->rxbufmap = 1; |
| } else { |
| dma_sync_single_for_device(ep->udc->gadget.dev.parent, |
| ep->rxbuf_d, size, |
| DMA_FROM_DEVICE); |
| ep->rxbufmap = 0; |
| } |
| |
| size = ep->ep.maxpacket + USB_CRC_SIZE + 2; |
| tmp = ep->rxbuf_d; |
| tmp = (u32)(((tmp >> 2) << 2) + 4); |
| |
| for (i = 0; i < bdring_len - 1; i++) { |
| out_be32(&bd->buf, tmp); |
| out_be32((u32 __iomem *)bd, (R_E | R_I)); |
| tmp = tmp + size; |
| bd++; |
| } |
| out_be32(&bd->buf, tmp); |
| out_be32((u32 __iomem *)bd, (R_E | R_I | R_W)); |
| |
| return 0; |
| } |
| |
| static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num) |
| { |
| struct qe_ep *ep = &udc->eps[pipe_num]; |
| struct usb_ep_para __iomem *epparam; |
| u16 usep, logepnum; |
| u16 tmp; |
| u8 rtfcr = 0; |
| |
| epparam = udc->ep_param[pipe_num]; |
| |
| usep = 0; |
| logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| usep |= (logepnum << USB_EPNUM_SHIFT); |
| |
| switch (ep->ep.desc->bmAttributes & 0x03) { |
| case USB_ENDPOINT_XFER_BULK: |
| usep |= USB_TRANS_BULK; |
| break; |
| case USB_ENDPOINT_XFER_ISOC: |
| usep |= USB_TRANS_ISO; |
| break; |
| case USB_ENDPOINT_XFER_INT: |
| usep |= USB_TRANS_INT; |
| break; |
| default: |
| usep |= USB_TRANS_CTR; |
| break; |
| } |
| |
| switch (ep->dir) { |
| case USB_DIR_OUT: |
| usep |= USB_THS_IGNORE_IN; |
| break; |
| case USB_DIR_IN: |
| usep |= USB_RHS_IGNORE_OUT; |
| break; |
| default: |
| break; |
| } |
| out_be16(&udc->usb_regs->usb_usep[pipe_num], usep); |
| |
| rtfcr = 0x30; |
| out_8(&epparam->rbmr, rtfcr); |
| out_8(&epparam->tbmr, rtfcr); |
| |
| tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE); |
| /* MRBLR must be divisble by 4 */ |
| tmp = (u16)(((tmp >> 2) << 2) + 4); |
| out_be16(&epparam->mrblr, tmp); |
| |
| return 0; |
| } |
| |
| static int qe_ep_init(struct qe_udc *udc, |
| unsigned char pipe_num, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct qe_ep *ep = &udc->eps[pipe_num]; |
| unsigned long flags; |
| int reval = 0; |
| u16 max = 0; |
| |
| max = usb_endpoint_maxp(desc); |
| |
| /* check the max package size validate for this endpoint */ |
| /* Refer to USB2.0 spec table 9-13, |
| */ |
| if (pipe_num != 0) { |
| switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { |
| case USB_ENDPOINT_XFER_BULK: |
| if (strstr(ep->ep.name, "-iso") |
| || strstr(ep->ep.name, "-int")) |
| goto en_done; |
| switch (udc->gadget.speed) { |
| case USB_SPEED_HIGH: |
| if ((max == 128) || (max == 256) || (max == 512)) |
| break; |
| default: |
| switch (max) { |
| case 4: |
| case 8: |
| case 16: |
| case 32: |
| case 64: |
| break; |
| default: |
| case USB_SPEED_LOW: |
| goto en_done; |
| } |
| } |
| break; |
| case USB_ENDPOINT_XFER_INT: |
| if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ |
| goto en_done; |
| switch (udc->gadget.speed) { |
| case USB_SPEED_HIGH: |
| if (max <= 1024) |
| break; |
| case USB_SPEED_FULL: |
| if (max <= 64) |
| break; |
| default: |
| if (max <= 8) |
| break; |
| goto en_done; |
| } |
| break; |
| case USB_ENDPOINT_XFER_ISOC: |
| if (strstr(ep->ep.name, "-bulk") |
| || strstr(ep->ep.name, "-int")) |
| goto en_done; |
| switch (udc->gadget.speed) { |
| case USB_SPEED_HIGH: |
| if (max <= 1024) |
| break; |
| case USB_SPEED_FULL: |
| if (max <= 1023) |
| break; |
| default: |
| goto en_done; |
| } |
| break; |
| case USB_ENDPOINT_XFER_CONTROL: |
| if (strstr(ep->ep.name, "-iso") |
| || strstr(ep->ep.name, "-int")) |
| goto en_done; |
| switch (udc->gadget.speed) { |
| case USB_SPEED_HIGH: |
| case USB_SPEED_FULL: |
| switch (max) { |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| case 16: |
| case 32: |
| case 64: |
| break; |
| default: |
| goto en_done; |
| } |
| case USB_SPEED_LOW: |
| switch (max) { |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| break; |
| default: |
| goto en_done; |
| } |
| default: |
| goto en_done; |
| } |
| break; |
| |
| default: |
| goto en_done; |
| } |
| } /* if ep0*/ |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| /* initialize ep structure */ |
| ep->ep.maxpacket = max; |
| ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); |
| ep->ep.desc = desc; |
| ep->stopped = 0; |
| ep->init = 1; |
| |
| if (pipe_num == 0) { |
| ep->dir = USB_DIR_BOTH; |
| udc->ep0_dir = USB_DIR_OUT; |
| udc->ep0_state = WAIT_FOR_SETUP; |
| } else { |
| switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { |
| case USB_DIR_OUT: |
| ep->dir = USB_DIR_OUT; |
| break; |
| case USB_DIR_IN: |
| ep->dir = USB_DIR_IN; |
| default: |
| break; |
| } |
| } |
| |
| /* hardware special operation */ |
| qe_ep_bd_init(udc, pipe_num); |
| if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) { |
| reval = qe_ep_rxbd_update(ep); |
| if (reval) |
| goto en_done1; |
| } |
| |
| if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) { |
| ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC); |
| if (ep->txframe == NULL) { |
| dev_err(udc->dev, "malloc txframe failed\n"); |
| goto en_done2; |
| } |
| qe_frame_init(ep->txframe); |
| } |
| |
| qe_ep_register_init(udc, pipe_num); |
| |
| /* Now HW will be NAKing transfers to that EP, |
| * until a buffer is queued to it. */ |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| return 0; |
| en_done2: |
| kfree(ep->rxbuffer); |
| kfree(ep->rxframe); |
| en_done1: |
| spin_unlock_irqrestore(&udc->lock, flags); |
| en_done: |
| dev_err(udc->dev, "failed to initialize %s\n", ep->ep.name); |
| return -ENODEV; |
| } |
| |
| static inline void qe_usb_enable(struct qe_udc *udc) |
| { |
| setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); |
| } |
| |
| static inline void qe_usb_disable(struct qe_udc *udc) |
| { |
| clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); |
| } |
| |
| /*----------------------------------------------------------------------------* |
| * USB and EP basic manipulate function end * |
| *----------------------------------------------------------------------------*/ |
| |
| |
| /****************************************************************************** |
| UDC transmit and receive process |
| ******************************************************************************/ |
| static void recycle_one_rxbd(struct qe_ep *ep) |
| { |
| u32 bdstatus; |
| |
| bdstatus = in_be32((u32 __iomem *)ep->e_rxbd); |
| bdstatus = R_I | R_E | (bdstatus & R_W); |
| out_be32((u32 __iomem *)ep->e_rxbd, bdstatus); |
| |
| if (bdstatus & R_W) |
| ep->e_rxbd = ep->rxbase; |
| else |
| ep->e_rxbd++; |
| } |
| |
| static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext) |
| { |
| u32 bdstatus; |
| struct qe_bd __iomem *bd, *nextbd; |
| unsigned char stop = 0; |
| |
| nextbd = ep->n_rxbd; |
| bd = ep->e_rxbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| |
| while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) { |
| bdstatus = R_E | R_I | (bdstatus & R_W); |
| out_be32((u32 __iomem *)bd, bdstatus); |
| |
| if (bdstatus & R_W) |
| bd = ep->rxbase; |
| else |
| bd++; |
| |
| bdstatus = in_be32((u32 __iomem *)bd); |
| if (stopatnext && (bd == nextbd)) |
| stop = 1; |
| } |
| |
| ep->e_rxbd = bd; |
| } |
| |
| static void ep_recycle_rxbds(struct qe_ep *ep) |
| { |
| struct qe_bd __iomem *bd = ep->n_rxbd; |
| u32 bdstatus; |
| u8 epnum = ep->epnum; |
| struct qe_udc *udc = ep->udc; |
| |
| bdstatus = in_be32((u32 __iomem *)bd); |
| if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) { |
| bd = ep->rxbase + |
| ((in_be16(&udc->ep_param[epnum]->rbptr) - |
| in_be16(&udc->ep_param[epnum]->rbase)) |
| >> 3); |
| bdstatus = in_be32((u32 __iomem *)bd); |
| |
| if (bdstatus & R_W) |
| bd = ep->rxbase; |
| else |
| bd++; |
| |
| ep->e_rxbd = bd; |
| recycle_rxbds(ep, 0); |
| ep->e_rxbd = ep->n_rxbd; |
| } else |
| recycle_rxbds(ep, 1); |
| |
| if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK) |
| out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK); |
| |
| if (ep->has_data <= 0 && (!list_empty(&ep->queue))) |
| qe_eprx_normal(ep); |
| |
| ep->localnack = 0; |
| } |
| |
| static void setup_received_handle(struct qe_udc *udc, |
| struct usb_ctrlrequest *setup); |
| static int qe_ep_rxframe_handle(struct qe_ep *ep); |
| static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req); |
| /* when BD PID is setup, handle the packet */ |
| static int ep0_setup_handle(struct qe_udc *udc) |
| { |
| struct qe_ep *ep = &udc->eps[0]; |
| struct qe_frame *pframe; |
| unsigned int fsize; |
| u8 *cp; |
| |
| pframe = ep->rxframe; |
| if ((frame_get_info(pframe) & PID_SETUP) |
| && (udc->ep0_state == WAIT_FOR_SETUP)) { |
| fsize = frame_get_length(pframe); |
| if (unlikely(fsize != 8)) |
| return -EINVAL; |
| cp = (u8 *)&udc->local_setup_buff; |
| memcpy(cp, pframe->data, fsize); |
| ep->data01 = 1; |
| |
| /* handle the usb command base on the usb_ctrlrequest */ |
| setup_received_handle(udc, &udc->local_setup_buff); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int qe_ep0_rx(struct qe_udc *udc) |
| { |
| struct qe_ep *ep = &udc->eps[0]; |
| struct qe_frame *pframe; |
| struct qe_bd __iomem *bd; |
| u32 bdstatus, length; |
| u32 vaddr; |
| |
| pframe = ep->rxframe; |
| |
| if (ep->dir == USB_DIR_IN) { |
| dev_err(udc->dev, "ep0 not a control endpoint\n"); |
| return -EINVAL; |
| } |
| |
| bd = ep->n_rxbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| |
| while (!(bdstatus & R_E) && length) { |
| if ((bdstatus & R_F) && (bdstatus & R_L) |
| && !(bdstatus & R_ERROR)) { |
| if (length == USB_CRC_SIZE) { |
| udc->ep0_state = WAIT_FOR_SETUP; |
| dev_vdbg(udc->dev, |
| "receive a ZLP in status phase\n"); |
| } else { |
| qe_frame_clean(pframe); |
| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); |
| frame_set_data(pframe, (u8 *)vaddr); |
| frame_set_length(pframe, |
| (length - USB_CRC_SIZE)); |
| frame_set_status(pframe, FRAME_OK); |
| switch (bdstatus & R_PID) { |
| case R_PID_SETUP: |
| frame_set_info(pframe, PID_SETUP); |
| break; |
| case R_PID_DATA1: |
| frame_set_info(pframe, PID_DATA1); |
| break; |
| default: |
| frame_set_info(pframe, PID_DATA0); |
| break; |
| } |
| |
| if ((bdstatus & R_PID) == R_PID_SETUP) |
| ep0_setup_handle(udc); |
| else |
| qe_ep_rxframe_handle(ep); |
| } |
| } else { |
| dev_err(udc->dev, "The receive frame with error!\n"); |
| } |
| |
| /* note: don't clear the rxbd's buffer address */ |
| recycle_one_rxbd(ep); |
| |
| /* Get next BD */ |
| if (bdstatus & R_W) |
| bd = ep->rxbase; |
| else |
| bd++; |
| |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| |
| } |
| |
| ep->n_rxbd = bd; |
| |
| return 0; |
| } |
| |
| static int qe_ep_rxframe_handle(struct qe_ep *ep) |
| { |
| struct qe_frame *pframe; |
| u8 framepid = 0; |
| unsigned int fsize; |
| u8 *cp; |
| struct qe_req *req; |
| |
| pframe = ep->rxframe; |
| |
| if (frame_get_info(pframe) & PID_DATA1) |
| framepid = 0x1; |
| |
| if (framepid != ep->data01) { |
| dev_err(ep->udc->dev, "the data01 error!\n"); |
| return -EIO; |
| } |
| |
| fsize = frame_get_length(pframe); |
| if (list_empty(&ep->queue)) { |
| dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name); |
| } else { |
| req = list_entry(ep->queue.next, struct qe_req, queue); |
| |
| cp = (u8 *)(req->req.buf) + req->req.actual; |
| if (cp) { |
| memcpy(cp, pframe->data, fsize); |
| req->req.actual += fsize; |
| if ((fsize < ep->ep.maxpacket) || |
| (req->req.actual >= req->req.length)) { |
| if (ep->epnum == 0) |
| ep0_req_complete(ep->udc, req); |
| else |
| done(ep, req, 0); |
| if (list_empty(&ep->queue) && ep->epnum != 0) |
| qe_eprx_nack(ep); |
| } |
| } |
| } |
| |
| qe_ep_toggledata01(ep); |
| |
| return 0; |
| } |
| |
| static void ep_rx_tasklet(unsigned long data) |
| { |
| struct qe_udc *udc = (struct qe_udc *)data; |
| struct qe_ep *ep; |
| struct qe_frame *pframe; |
| struct qe_bd __iomem *bd; |
| unsigned long flags; |
| u32 bdstatus, length; |
| u32 vaddr, i; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| for (i = 1; i < USB_MAX_ENDPOINTS; i++) { |
| ep = &udc->eps[i]; |
| |
| if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) { |
| dev_dbg(udc->dev, |
| "This is a transmit ep or disable tasklet!\n"); |
| continue; |
| } |
| |
| pframe = ep->rxframe; |
| bd = ep->n_rxbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| |
| while (!(bdstatus & R_E) && length) { |
| if (list_empty(&ep->queue)) { |
| qe_eprx_nack(ep); |
| dev_dbg(udc->dev, |
| "The rxep have noreq %d\n", |
| ep->has_data); |
| break; |
| } |
| |
| if ((bdstatus & R_F) && (bdstatus & R_L) |
| && !(bdstatus & R_ERROR)) { |
| qe_frame_clean(pframe); |
| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); |
| frame_set_data(pframe, (u8 *)vaddr); |
| frame_set_length(pframe, |
| (length - USB_CRC_SIZE)); |
| frame_set_status(pframe, FRAME_OK); |
| switch (bdstatus & R_PID) { |
| case R_PID_DATA1: |
| frame_set_info(pframe, PID_DATA1); |
| break; |
| case R_PID_SETUP: |
| frame_set_info(pframe, PID_SETUP); |
| break; |
| default: |
| frame_set_info(pframe, PID_DATA0); |
| break; |
| } |
| /* handle the rx frame */ |
| qe_ep_rxframe_handle(ep); |
| } else { |
| dev_err(udc->dev, |
| "error in received frame\n"); |
| } |
| /* note: don't clear the rxbd's buffer address */ |
| /*clear the length */ |
| out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK); |
| ep->has_data--; |
| if (!(ep->localnack)) |
| recycle_one_rxbd(ep); |
| |
| /* Get next BD */ |
| if (bdstatus & R_W) |
| bd = ep->rxbase; |
| else |
| bd++; |
| |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| } |
| |
| ep->n_rxbd = bd; |
| |
| if (ep->localnack) |
| ep_recycle_rxbds(ep); |
| |
| ep->enable_tasklet = 0; |
| } /* for i=1 */ |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| } |
| |
| static int qe_ep_rx(struct qe_ep *ep) |
| { |
| struct qe_udc *udc; |
| struct qe_frame *pframe; |
| struct qe_bd __iomem *bd; |
| u16 swoffs, ucoffs, emptybds; |
| |
| udc = ep->udc; |
| pframe = ep->rxframe; |
| |
| if (ep->dir == USB_DIR_IN) { |
| dev_err(udc->dev, "transmit ep in rx function\n"); |
| return -EINVAL; |
| } |
| |
| bd = ep->n_rxbd; |
| |
| swoffs = (u16)(bd - ep->rxbase); |
| ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) - |
| in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3); |
| if (swoffs < ucoffs) |
| emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs; |
| else |
| emptybds = swoffs - ucoffs; |
| |
| if (emptybds < MIN_EMPTY_BDS) { |
| qe_eprx_nack(ep); |
| ep->localnack = 1; |
| dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds); |
| } |
| ep->has_data = USB_BDRING_LEN_RX - emptybds; |
| |
| if (list_empty(&ep->queue)) { |
| qe_eprx_nack(ep); |
| dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n", |
| ep->has_data); |
| return 0; |
| } |
| |
| tasklet_schedule(&udc->rx_tasklet); |
| ep->enable_tasklet = 1; |
| |
| return 0; |
| } |
| |
| /* send data from a frame, no matter what tx_req */ |
| static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame) |
| { |
| struct qe_udc *udc = ep->udc; |
| struct qe_bd __iomem *bd; |
| u16 saveusbmr; |
| u32 bdstatus, pidmask; |
| u32 paddr; |
| |
| if (ep->dir == USB_DIR_OUT) { |
| dev_err(udc->dev, "receive ep passed to tx function\n"); |
| return -EINVAL; |
| } |
| |
| /* Disable the Tx interrupt */ |
| saveusbmr = in_be16(&udc->usb_regs->usb_usbmr); |
| out_be16(&udc->usb_regs->usb_usbmr, |
| saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK)); |
| |
| bd = ep->n_txbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| |
| if (!(bdstatus & (T_R | BD_LENGTH_MASK))) { |
| if (frame_get_length(frame) == 0) { |
| frame_set_data(frame, udc->nullbuf); |
| frame_set_length(frame, 2); |
| frame->info |= (ZLP | NO_CRC); |
| dev_vdbg(udc->dev, "the frame size = 0\n"); |
| } |
| paddr = virt_to_phys((void *)frame->data); |
| out_be32(&bd->buf, paddr); |
| bdstatus = (bdstatus&T_W); |
| if (!(frame_get_info(frame) & NO_CRC)) |
| bdstatus |= T_R | T_I | T_L | T_TC |
| | frame_get_length(frame); |
| else |
| bdstatus |= T_R | T_I | T_L | frame_get_length(frame); |
| |
| /* if the packet is a ZLP in status phase */ |
| if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP)) |
| ep->data01 = 0x1; |
| |
| if (ep->data01) { |
| pidmask = T_PID_DATA1; |
| frame->info |= PID_DATA1; |
| } else { |
| pidmask = T_PID_DATA0; |
| frame->info |= PID_DATA0; |
| } |
| bdstatus |= T_CNF; |
| bdstatus |= pidmask; |
| out_be32((u32 __iomem *)bd, bdstatus); |
| qe_ep_filltxfifo(ep); |
| |
| /* enable the TX interrupt */ |
| out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); |
| |
| qe_ep_toggledata01(ep); |
| if (bdstatus & T_W) |
| ep->n_txbd = ep->txbase; |
| else |
| ep->n_txbd++; |
| |
| return 0; |
| } else { |
| out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); |
| dev_vdbg(udc->dev, "The tx bd is not ready!\n"); |
| return -EBUSY; |
| } |
| } |
| |
| /* when a bd was transmitted, the function can |
| * handle the tx_req, not include ep0 */ |
| static int txcomplete(struct qe_ep *ep, unsigned char restart) |
| { |
| if (ep->tx_req != NULL) { |
| struct qe_req *req = ep->tx_req; |
| unsigned zlp = 0, last_len = 0; |
| |
| last_len = min_t(unsigned, req->req.length - ep->sent, |
| ep->ep.maxpacket); |
| |
| if (!restart) { |
| int asent = ep->last; |
| ep->sent += asent; |
| ep->last -= asent; |
| } else { |
| ep->last = 0; |
| } |
| |
| /* zlp needed when req->re.zero is set */ |
| if (req->req.zero) { |
| if (last_len == 0 || |
| (req->req.length % ep->ep.maxpacket) != 0) |
| zlp = 0; |
| else |
| zlp = 1; |
| } else |
| zlp = 0; |
| |
| /* a request already were transmitted completely */ |
| if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) { |
| done(ep, ep->tx_req, 0); |
| ep->tx_req = NULL; |
| ep->last = 0; |
| ep->sent = 0; |
| } |
| } |
| |
| /* we should gain a new tx_req fot this endpoint */ |
| if (ep->tx_req == NULL) { |
| if (!list_empty(&ep->queue)) { |
| ep->tx_req = list_entry(ep->queue.next, struct qe_req, |
| queue); |
| ep->last = 0; |
| ep->sent = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* give a frame and a tx_req, send some data */ |
| static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame) |
| { |
| unsigned int size; |
| u8 *buf; |
| |
| qe_frame_clean(frame); |
| size = min_t(u32, (ep->tx_req->req.length - ep->sent), |
| ep->ep.maxpacket); |
| buf = (u8 *)ep->tx_req->req.buf + ep->sent; |
| if (buf && size) { |
| ep->last = size; |
| ep->tx_req->req.actual += size; |
| frame_set_data(frame, buf); |
| frame_set_length(frame, size); |
| frame_set_status(frame, FRAME_OK); |
| frame_set_info(frame, 0); |
| return qe_ep_tx(ep, frame); |
| } |
| return -EIO; |
| } |
| |
| /* give a frame struct,send a ZLP */ |
| static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor) |
| { |
| struct qe_udc *udc = ep->udc; |
| |
| if (frame == NULL) |
| return -ENODEV; |
| |
| qe_frame_clean(frame); |
| frame_set_data(frame, (u8 *)udc->nullbuf); |
| frame_set_length(frame, 2); |
| frame_set_status(frame, FRAME_OK); |
| frame_set_info(frame, (ZLP | NO_CRC | infor)); |
| |
| return qe_ep_tx(ep, frame); |
| } |
| |
| static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame) |
| { |
| struct qe_req *req = ep->tx_req; |
| int reval; |
| |
| if (req == NULL) |
| return -ENODEV; |
| |
| if ((req->req.length - ep->sent) > 0) |
| reval = qe_usb_senddata(ep, frame); |
| else |
| reval = sendnulldata(ep, frame, 0); |
| |
| return reval; |
| } |
| |
| /* if direction is DIR_IN, the status is Device->Host |
| * if direction is DIR_OUT, the status transaction is Device<-Host |
| * in status phase, udc create a request and gain status */ |
| static int ep0_prime_status(struct qe_udc *udc, int direction) |
| { |
| |
| struct qe_ep *ep = &udc->eps[0]; |
| |
| if (direction == USB_DIR_IN) { |
| udc->ep0_state = DATA_STATE_NEED_ZLP; |
| udc->ep0_dir = USB_DIR_IN; |
| sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); |
| } else { |
| udc->ep0_dir = USB_DIR_OUT; |
| udc->ep0_state = WAIT_FOR_OUT_STATUS; |
| } |
| |
| return 0; |
| } |
| |
| /* a request complete in ep0, whether gadget request or udc request */ |
| static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req) |
| { |
| struct qe_ep *ep = &udc->eps[0]; |
| /* because usb and ep's status already been set in ch9setaddress() */ |
| |
| switch (udc->ep0_state) { |
| case DATA_STATE_XMIT: |
| done(ep, req, 0); |
| /* receive status phase */ |
| if (ep0_prime_status(udc, USB_DIR_OUT)) |
| qe_ep0_stall(udc); |
| break; |
| |
| case DATA_STATE_NEED_ZLP: |
| done(ep, req, 0); |
| udc->ep0_state = WAIT_FOR_SETUP; |
| break; |
| |
| case DATA_STATE_RECV: |
| done(ep, req, 0); |
| /* send status phase */ |
| if (ep0_prime_status(udc, USB_DIR_IN)) |
| qe_ep0_stall(udc); |
| break; |
| |
| case WAIT_FOR_OUT_STATUS: |
| done(ep, req, 0); |
| udc->ep0_state = WAIT_FOR_SETUP; |
| break; |
| |
| case WAIT_FOR_SETUP: |
| dev_vdbg(udc->dev, "Unexpected interrupt\n"); |
| break; |
| |
| default: |
| qe_ep0_stall(udc); |
| break; |
| } |
| } |
| |
| static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart) |
| { |
| struct qe_req *tx_req = NULL; |
| struct qe_frame *frame = ep->txframe; |
| |
| if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) { |
| if (!restart) |
| ep->udc->ep0_state = WAIT_FOR_SETUP; |
| else |
| sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); |
| return 0; |
| } |
| |
| tx_req = ep->tx_req; |
| if (tx_req != NULL) { |
| if (!restart) { |
| int asent = ep->last; |
| ep->sent += asent; |
| ep->last -= asent; |
| } else { |
| ep->last = 0; |
| } |
| |
| /* a request already were transmitted completely */ |
| if ((ep->tx_req->req.length - ep->sent) <= 0) { |
| ep->tx_req->req.actual = (unsigned int)ep->sent; |
| ep0_req_complete(ep->udc, ep->tx_req); |
| ep->tx_req = NULL; |
| ep->last = 0; |
| ep->sent = 0; |
| } |
| } else { |
| dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int ep0_txframe_handle(struct qe_ep *ep) |
| { |
| /* if have error, transmit again */ |
| if (frame_get_status(ep->txframe) & FRAME_ERROR) { |
| qe_ep_flushtxfifo(ep); |
| dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); |
| if (frame_get_info(ep->txframe) & PID_DATA0) |
| ep->data01 = 0; |
| else |
| ep->data01 = 1; |
| |
| ep0_txcomplete(ep, 1); |
| } else |
| ep0_txcomplete(ep, 0); |
| |
| frame_create_tx(ep, ep->txframe); |
| return 0; |
| } |
| |
| static int qe_ep0_txconf(struct qe_ep *ep) |
| { |
| struct qe_bd __iomem *bd; |
| struct qe_frame *pframe; |
| u32 bdstatus; |
| |
| bd = ep->c_txbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { |
| pframe = ep->txframe; |
| |
| /* clear and recycle the BD */ |
| out_be32((u32 __iomem *)bd, bdstatus & T_W); |
| out_be32(&bd->buf, 0); |
| if (bdstatus & T_W) |
| ep->c_txbd = ep->txbase; |
| else |
| ep->c_txbd++; |
| |
| if (ep->c_txbd == ep->n_txbd) { |
| if (bdstatus & DEVICE_T_ERROR) { |
| frame_set_status(pframe, FRAME_ERROR); |
| if (bdstatus & T_TO) |
| pframe->status |= TX_ER_TIMEOUT; |
| if (bdstatus & T_UN) |
| pframe->status |= TX_ER_UNDERUN; |
| } |
| ep0_txframe_handle(ep); |
| } |
| |
| bd = ep->c_txbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| } |
| |
| return 0; |
| } |
| |
| static int ep_txframe_handle(struct qe_ep *ep) |
| { |
| if (frame_get_status(ep->txframe) & FRAME_ERROR) { |
| qe_ep_flushtxfifo(ep); |
| dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); |
| if (frame_get_info(ep->txframe) & PID_DATA0) |
| ep->data01 = 0; |
| else |
| ep->data01 = 1; |
| |
| txcomplete(ep, 1); |
| } else |
| txcomplete(ep, 0); |
| |
| frame_create_tx(ep, ep->txframe); /* send the data */ |
| return 0; |
| } |
| |
| /* confirm the already trainsmited bd */ |
| static int qe_ep_txconf(struct qe_ep *ep) |
| { |
| struct qe_bd __iomem *bd; |
| struct qe_frame *pframe = NULL; |
| u32 bdstatus; |
| unsigned char breakonrxinterrupt = 0; |
| |
| bd = ep->c_txbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { |
| pframe = ep->txframe; |
| if (bdstatus & DEVICE_T_ERROR) { |
| frame_set_status(pframe, FRAME_ERROR); |
| if (bdstatus & T_TO) |
| pframe->status |= TX_ER_TIMEOUT; |
| if (bdstatus & T_UN) |
| pframe->status |= TX_ER_UNDERUN; |
| } |
| |
| /* clear and recycle the BD */ |
| out_be32((u32 __iomem *)bd, bdstatus & T_W); |
| out_be32(&bd->buf, 0); |
| if (bdstatus & T_W) |
| ep->c_txbd = ep->txbase; |
| else |
| ep->c_txbd++; |
| |
| /* handle the tx frame */ |
| ep_txframe_handle(ep); |
| bd = ep->c_txbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| } |
| if (breakonrxinterrupt) |
| return -EIO; |
| else |
| return 0; |
| } |
| |
| /* Add a request in queue, and try to transmit a packet */ |
| static int ep_req_send(struct qe_ep *ep, struct qe_req *req) |
| { |
| int reval = 0; |
| |
| if (ep->tx_req == NULL) { |
| ep->sent = 0; |
| ep->last = 0; |
| txcomplete(ep, 0); /* can gain a new tx_req */ |
| reval = frame_create_tx(ep, ep->txframe); |
| } |
| return reval; |
| } |
| |
| /* Maybe this is a good ideal */ |
| static int ep_req_rx(struct qe_ep *ep, struct qe_req *req) |
| { |
| struct qe_udc *udc = ep->udc; |
| struct qe_frame *pframe = NULL; |
| struct qe_bd __iomem *bd; |
| u32 bdstatus, length; |
| u32 vaddr, fsize; |
| u8 *cp; |
| u8 finish_req = 0; |
| u8 framepid; |
| |
| if (list_empty(&ep->queue)) { |
| dev_vdbg(udc->dev, "the req already finish!\n"); |
| return 0; |
| } |
| pframe = ep->rxframe; |
| |
| bd = ep->n_rxbd; |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| |
| while (!(bdstatus & R_E) && length) { |
| if (finish_req) |
| break; |
| if ((bdstatus & R_F) && (bdstatus & R_L) |
| && !(bdstatus & R_ERROR)) { |
| qe_frame_clean(pframe); |
| vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); |
| frame_set_data(pframe, (u8 *)vaddr); |
| frame_set_length(pframe, (length - USB_CRC_SIZE)); |
| frame_set_status(pframe, FRAME_OK); |
| switch (bdstatus & R_PID) { |
| case R_PID_DATA1: |
| frame_set_info(pframe, PID_DATA1); break; |
| default: |
| frame_set_info(pframe, PID_DATA0); break; |
| } |
| /* handle the rx frame */ |
| |
| if (frame_get_info(pframe) & PID_DATA1) |
| framepid = 0x1; |
| else |
| framepid = 0; |
| |
| if (framepid != ep->data01) { |
| dev_vdbg(udc->dev, "the data01 error!\n"); |
| } else { |
| fsize = frame_get_length(pframe); |
| |
| cp = (u8 *)(req->req.buf) + req->req.actual; |
| if (cp) { |
| memcpy(cp, pframe->data, fsize); |
| req->req.actual += fsize; |
| if ((fsize < ep->ep.maxpacket) |
| || (req->req.actual >= |
| req->req.length)) { |
| finish_req = 1; |
| done(ep, req, 0); |
| if (list_empty(&ep->queue)) |
| qe_eprx_nack(ep); |
| } |
| } |
| qe_ep_toggledata01(ep); |
| } |
| } else { |
| dev_err(udc->dev, "The receive frame with error!\n"); |
| } |
| |
| /* note: don't clear the rxbd's buffer address * |
| * only Clear the length */ |
| out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK)); |
| ep->has_data--; |
| |
| /* Get next BD */ |
| if (bdstatus & R_W) |
| bd = ep->rxbase; |
| else |
| bd++; |
| |
| bdstatus = in_be32((u32 __iomem *)bd); |
| length = bdstatus & BD_LENGTH_MASK; |
| } |
| |
| ep->n_rxbd = bd; |
| ep_recycle_rxbds(ep); |
| |
| return 0; |
| } |
| |
| /* only add the request in queue */ |
| static int ep_req_receive(struct qe_ep *ep, struct qe_req *req) |
| { |
| if (ep->state == EP_STATE_NACK) { |
| if (ep->has_data <= 0) { |
| /* Enable rx and unmask rx interrupt */ |
| qe_eprx_normal(ep); |
| } else { |
| /* Copy the exist BD data */ |
| ep_req_rx(ep, req); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /******************************************************************** |
| Internal Used Function End |
| ********************************************************************/ |
| |
| /*----------------------------------------------------------------------- |
| Endpoint Management Functions For Gadget |
| -----------------------------------------------------------------------*/ |
| static int qe_ep_enable(struct usb_ep *_ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct qe_udc *udc; |
| struct qe_ep *ep; |
| int retval = 0; |
| unsigned char epnum; |
| |
| ep = container_of(_ep, struct qe_ep, ep); |
| |
| /* catch various bogus parameters */ |
| if (!_ep || !desc || _ep->name == ep_name[0] || |
| (desc->bDescriptorType != USB_DT_ENDPOINT)) |
| return -EINVAL; |
| |
| udc = ep->udc; |
| if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) |
| return -ESHUTDOWN; |
| |
| epnum = (u8)desc->bEndpointAddress & 0xF; |
| |
| retval = qe_ep_init(udc, epnum, desc); |
| if (retval != 0) { |
| cpm_muram_free(cpm_muram_offset(ep->rxbase)); |
| dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum); |
| return -EINVAL; |
| } |
| dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum); |
| return 0; |
| } |
| |
| static int qe_ep_disable(struct usb_ep *_ep) |
| { |
| struct qe_udc *udc; |
| struct qe_ep *ep; |
| unsigned long flags; |
| unsigned int size; |
| |
| ep = container_of(_ep, struct qe_ep, ep); |
| udc = ep->udc; |
| |
| if (!_ep || !ep->ep.desc) { |
| dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| /* Nuke all pending requests (does flush) */ |
| nuke(ep, -ESHUTDOWN); |
| ep->ep.desc = NULL; |
| ep->stopped = 1; |
| ep->tx_req = NULL; |
| qe_ep_reset(udc, ep->epnum); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| cpm_muram_free(cpm_muram_offset(ep->rxbase)); |
| |
| if (ep->dir == USB_DIR_OUT) |
| size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * |
| (USB_BDRING_LEN_RX + 1); |
| else |
| size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * |
| (USB_BDRING_LEN + 1); |
| |
| if (ep->dir != USB_DIR_IN) { |
| kfree(ep->rxframe); |
| if (ep->rxbufmap) { |
| dma_unmap_single(udc->gadget.dev.parent, |
| ep->rxbuf_d, size, |
| DMA_FROM_DEVICE); |
| ep->rxbuf_d = DMA_ADDR_INVALID; |
| } else { |
| dma_sync_single_for_cpu( |
| udc->gadget.dev.parent, |
| ep->rxbuf_d, size, |
| DMA_FROM_DEVICE); |
| } |
| kfree(ep->rxbuffer); |
| } |
| |
| if (ep->dir != USB_DIR_OUT) |
| kfree(ep->txframe); |
| |
| dev_dbg(udc->dev, "disabled %s OK\n", _ep->name); |
| return 0; |
| } |
| |
| static struct usb_request *qe_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) |
| { |
| struct qe_req *req; |
| |
| req = kzalloc(sizeof(*req), gfp_flags); |
| if (!req) |
| return NULL; |
| |
| req->req.dma = DMA_ADDR_INVALID; |
| |
| INIT_LIST_HEAD(&req->queue); |
| |
| return &req->req; |
| } |
| |
| static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct qe_req *req; |
| |
| req = container_of(_req, struct qe_req, req); |
| |
| if (_req) |
| kfree(req); |
| } |
| |
| static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); |
| struct qe_req *req = container_of(_req, struct qe_req, req); |
| struct qe_udc *udc; |
| int reval; |
| |
| udc = ep->udc; |
| /* catch various bogus parameters */ |
| if (!_req || !req->req.complete || !req->req.buf |
| || !list_empty(&req->queue)) { |
| dev_dbg(udc->dev, "bad params\n"); |
| return -EINVAL; |
| } |
| if (!_ep || (!ep->ep.desc && ep_index(ep))) { |
| dev_dbg(udc->dev, "bad ep\n"); |
| return -EINVAL; |
| } |
| |
| if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) |
| return -ESHUTDOWN; |
| |
| req->ep = ep; |
| |
| /* map virtual address to hardware */ |
| if (req->req.dma == DMA_ADDR_INVALID) { |
| req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, |
| req->req.buf, |
| req->req.length, |
| ep_is_in(ep) |
| ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| req->mapped = 1; |
| } else { |
| dma_sync_single_for_device(ep->udc->gadget.dev.parent, |
| req->req.dma, req->req.length, |
| ep_is_in(ep) |
| ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| req->mapped = 0; |
| } |
| |
| req->req.status = -EINPROGRESS; |
| req->req.actual = 0; |
| |
| list_add_tail(&req->queue, &ep->queue); |
| dev_vdbg(udc->dev, "gadget have request in %s! %d\n", |
| ep->name, req->req.length); |
| |
| /* push the request to device */ |
| if (ep_is_in(ep)) |
| reval = ep_req_send(ep, req); |
| |
| /* EP0 */ |
| if (ep_index(ep) == 0 && req->req.length > 0) { |
| if (ep_is_in(ep)) |
| udc->ep0_state = DATA_STATE_XMIT; |
| else |
| udc->ep0_state = DATA_STATE_RECV; |
| } |
| |
| if (ep->dir == USB_DIR_OUT) |
| reval = ep_req_receive(ep, req); |
| |
| return 0; |
| } |
| |
| /* queues (submits) an I/O request to an endpoint */ |
| static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, |
| gfp_t gfp_flags) |
| { |
| struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); |
| struct qe_udc *udc = ep->udc; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| ret = __qe_ep_queue(_ep, _req); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| return ret; |
| } |
| |
| /* dequeues (cancels, unlinks) an I/O request from an endpoint */ |
| static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); |
| struct qe_req *req; |
| unsigned long flags; |
| |
| if (!_ep || !_req) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&ep->udc->lock, flags); |
| |
| /* make sure it's actually queued on this endpoint */ |
| list_for_each_entry(req, &ep->queue, queue) { |
| if (&req->req == _req) |
| break; |
| } |
| |
| if (&req->req != _req) { |
| spin_unlock_irqrestore(&ep->udc->lock, flags); |
| return -EINVAL; |
| } |
| |
| done(ep, req, -ECONNRESET); |
| |
| spin_unlock_irqrestore(&ep->udc->lock, flags); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------- |
| * modify the endpoint halt feature |
| * @ep: the non-isochronous endpoint being stalled |
| * @value: 1--set halt 0--clear halt |
| * Returns zero, or a negative error code. |
| *----------------------------------------------------------------*/ |
| static int qe_ep_set_halt(struct usb_ep *_ep, int value) |
| { |
| struct qe_ep *ep; |
| unsigned long flags; |
| int status = -EOPNOTSUPP; |
| struct qe_udc *udc; |
| |
| ep = container_of(_ep, struct qe_ep, ep); |
| if (!_ep || !ep->ep.desc) { |
| status = -EINVAL; |
| goto out; |
| } |
| |
| udc = ep->udc; |
| /* Attempt to halt IN ep will fail if any transfer requests |
| * are still queue */ |
| if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { |
| status = -EAGAIN; |
| goto out; |
| } |
| |
| status = 0; |
| spin_lock_irqsave(&ep->udc->lock, flags); |
| qe_eptx_stall_change(ep, value); |
| qe_eprx_stall_change(ep, value); |
| spin_unlock_irqrestore(&ep->udc->lock, flags); |
| |
| if (ep->epnum == 0) { |
| udc->ep0_state = WAIT_FOR_SETUP; |
| udc->ep0_dir = 0; |
| } |
| |
| /* set data toggle to DATA0 on clear halt */ |
| if (value == 0) |
| ep->data01 = 0; |
| out: |
| dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name, |
| value ? "set" : "clear", status); |
| |
| return status; |
| } |
| |
| static struct usb_ep_ops qe_ep_ops = { |
| .enable = qe_ep_enable, |
| .disable = qe_ep_disable, |
| |
| .alloc_request = qe_alloc_request, |
| .free_request = qe_free_request, |
| |
| .queue = qe_ep_queue, |
| .dequeue = qe_ep_dequeue, |
| |
| .set_halt = qe_ep_set_halt, |
| }; |
| |
| /*------------------------------------------------------------------------ |
| Gadget Driver Layer Operations |
| ------------------------------------------------------------------------*/ |
| |
| /* Get the current frame number */ |
| static int qe_get_frame(struct usb_gadget *gadget) |
| { |
| struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget); |
| u16 tmp; |
| |
| tmp = in_be16(&udc->usb_param->frame_n); |
| if (tmp & 0x8000) |
| tmp = tmp & 0x07ff; |
| else |
| tmp = -EINVAL; |
| |
| return (int)tmp; |
| } |
| |
| static int fsl_qe_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver); |
| static int fsl_qe_stop(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver); |
| |
| /* defined in usb_gadget.h */ |
| static const struct usb_gadget_ops qe_gadget_ops = { |
| .get_frame = qe_get_frame, |
| .udc_start = fsl_qe_start, |
| .udc_stop = fsl_qe_stop, |
| }; |
| |
| /*------------------------------------------------------------------------- |
| USB ep0 Setup process in BUS Enumeration |
| -------------------------------------------------------------------------*/ |
| static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe) |
| { |
| struct qe_ep *ep = &udc->eps[pipe]; |
| |
| nuke(ep, -ECONNRESET); |
| ep->tx_req = NULL; |
| return 0; |
| } |
| |
| static int reset_queues(struct qe_udc *udc) |
| { |
| u8 pipe; |
| |
| for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++) |
| udc_reset_ep_queue(udc, pipe); |
| |
| /* report disconnect; the driver is already quiesced */ |
| spin_unlock(&udc->lock); |
| udc->driver->disconnect(&udc->gadget); |
| spin_lock(&udc->lock); |
| |
| return 0; |
| } |
| |
| static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index, |
| u16 length) |
| { |
| /* Save the new address to device struct */ |
| udc->device_address = (u8) value; |
| /* Update usb state */ |
| udc->usb_state = USB_STATE_ADDRESS; |
| |
| /* Status phase , send a ZLP */ |
| if (ep0_prime_status(udc, USB_DIR_IN)) |
| qe_ep0_stall(udc); |
| } |
| |
| static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct qe_req *req = container_of(_req, struct qe_req, req); |
| |
| req->req.buf = NULL; |
| kfree(req); |
| } |
| |
| static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, |
| u16 index, u16 length) |
| { |
| u16 usb_status = 0; |
| struct qe_req *req; |
| struct qe_ep *ep; |
| int status = 0; |
| |
| ep = &udc->eps[0]; |
| if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { |
| /* Get device status */ |
| usb_status = 1 << USB_DEVICE_SELF_POWERED; |
| } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { |
| /* Get interface status */ |
| /* We don't have interface information in udc driver */ |
| usb_status = 0; |
| } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { |
| /* Get endpoint status */ |
| int pipe = index & USB_ENDPOINT_NUMBER_MASK; |
| struct qe_ep *target_ep = &udc->eps[pipe]; |
| u16 usep; |
| |
| /* stall if endpoint doesn't exist */ |
| if (!target_ep->ep.desc) |
| goto stall; |
| |
| usep = in_be16(&udc->usb_regs->usb_usep[pipe]); |
| if (index & USB_DIR_IN) { |
| if (target_ep->dir != USB_DIR_IN) |
| goto stall; |
| if ((usep & USB_THS_MASK) == USB_THS_STALL) |
| usb_status = 1 << USB_ENDPOINT_HALT; |
| } else { |
| if (target_ep->dir != USB_DIR_OUT) |
| goto stall; |
| if ((usep & USB_RHS_MASK) == USB_RHS_STALL) |
| usb_status = 1 << USB_ENDPOINT_HALT; |
| } |
| } |
| |
| req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL), |
| struct qe_req, req); |
| req->req.length = 2; |
| req->req.buf = udc->statusbuf; |
| *(u16 *)req->req.buf = cpu_to_le16(usb_status); |
| req->req.status = -EINPROGRESS; |
| req->req.actual = 0; |
| req->req.complete = ownercomplete; |
| |
| udc->ep0_dir = USB_DIR_IN; |
| |
| /* data phase */ |
| status = __qe_ep_queue(&ep->ep, &req->req); |
| |
| if (status == 0) |
| return; |
| stall: |
| dev_err(udc->dev, "Can't respond to getstatus request \n"); |
| qe_ep0_stall(udc); |
| } |
| |
| /* only handle the setup request, suppose the device in normal status */ |
| static void setup_received_handle(struct qe_udc *udc, |
| struct usb_ctrlrequest *setup) |
| { |
| /* Fix Endian (udc->local_setup_buff is cpu Endian now)*/ |
| u16 wValue = le16_to_cpu(setup->wValue); |
| u16 wIndex = le16_to_cpu(setup->wIndex); |
| u16 wLength = le16_to_cpu(setup->wLength); |
| |
| /* clear the previous request in the ep0 */ |
| udc_reset_ep_queue(udc, 0); |
| |
| if (setup->bRequestType & USB_DIR_IN) |
| udc->ep0_dir = USB_DIR_IN; |
| else |
| udc->ep0_dir = USB_DIR_OUT; |
| |
| switch (setup->bRequest) { |
| case USB_REQ_GET_STATUS: |
| /* Data+Status phase form udc */ |
| if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) |
| != (USB_DIR_IN | USB_TYPE_STANDARD)) |
| break; |
| ch9getstatus(udc, setup->bRequestType, wValue, wIndex, |
| wLength); |
| return; |
| |
| case USB_REQ_SET_ADDRESS: |
| /* Status phase from udc */ |
| if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | |
| USB_RECIP_DEVICE)) |
| break; |
| ch9setaddress(udc, wValue, wIndex, wLength); |
| return; |
| |
| case USB_REQ_CLEAR_FEATURE: |
| case USB_REQ_SET_FEATURE: |
| /* Requests with no data phase, status phase from udc */ |
| if ((setup->bRequestType & USB_TYPE_MASK) |
| != USB_TYPE_STANDARD) |
| break; |
| |
| if ((setup->bRequestType & USB_RECIP_MASK) |
| == USB_RECIP_ENDPOINT) { |
| int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK; |
| struct qe_ep *ep; |
| |
| if (wValue != 0 || wLength != 0 |
| || pipe > USB_MAX_ENDPOINTS) |
| break; |
| ep = &udc->eps[pipe]; |
| |
| spin_unlock(&udc->lock); |
| qe_ep_set_halt(&ep->ep, |
| (setup->bRequest == USB_REQ_SET_FEATURE) |
| ? 1 : 0); |
| spin_lock(&udc->lock); |
| } |
| |
| ep0_prime_status(udc, USB_DIR_IN); |
| |
| return; |
| |
| default: |
| break; |
| } |
| |
| if (wLength) { |
| /* Data phase from gadget, status phase from udc */ |
| if (setup->bRequestType & USB_DIR_IN) { |
| udc->ep0_state = DATA_STATE_XMIT; |
| udc->ep0_dir = USB_DIR_IN; |
| } else { |
| udc->ep0_state = DATA_STATE_RECV; |
| udc->ep0_dir = USB_DIR_OUT; |
| } |
| spin_unlock(&udc->lock); |
| if (udc->driver->setup(&udc->gadget, |
| &udc->local_setup_buff) < 0) |
| qe_ep0_stall(udc); |
| spin_lock(&udc->lock); |
| } else { |
| /* No data phase, IN status from gadget */ |
| udc->ep0_dir = USB_DIR_IN; |
| spin_unlock(&udc->lock); |
| if (udc->driver->setup(&udc->gadget, |
| &udc->local_setup_buff) < 0) |
| qe_ep0_stall(udc); |
| spin_lock(&udc->lock); |
| udc->ep0_state = DATA_STATE_NEED_ZLP; |
| } |
| } |
| |
| /*------------------------------------------------------------------------- |
| USB Interrupt handlers |
| -------------------------------------------------------------------------*/ |
| static void suspend_irq(struct qe_udc *udc) |
| { |
| udc->resume_state = udc->usb_state; |
| udc->usb_state = USB_STATE_SUSPENDED; |
| |
| /* report suspend to the driver ,serial.c not support this*/ |
| if (udc->driver->suspend) |
| udc->driver->suspend(&udc->gadget); |
| } |
| |
| static void resume_irq(struct qe_udc *udc) |
| { |
| udc->usb_state = udc->resume_state; |
| udc->resume_state = 0; |
| |
| /* report resume to the driver , serial.c not support this*/ |
| if (udc->driver->resume) |
| udc->driver->resume(&udc->gadget); |
| } |
| |
| static void idle_irq(struct qe_udc *udc) |
| { |
| u8 usbs; |
| |
| usbs = in_8(&udc->usb_regs->usb_usbs); |
| if (usbs & USB_IDLE_STATUS_MASK) { |
| if ((udc->usb_state) != USB_STATE_SUSPENDED) |
| suspend_irq(udc); |
| } else { |
| if (udc->usb_state == USB_STATE_SUSPENDED) |
| resume_irq(udc); |
| } |
| } |
| |
| static int reset_irq(struct qe_udc *udc) |
| { |
| unsigned char i; |
| |
| if (udc->usb_state == USB_STATE_DEFAULT) |
| return 0; |
| |
| qe_usb_disable(udc); |
| out_8(&udc->usb_regs->usb_usadr, 0); |
| |
| for (i = 0; i < USB_MAX_ENDPOINTS; i++) { |
| if (udc->eps[i].init) |
| qe_ep_reset(udc, i); |
| } |
| |
| reset_queues(udc); |
| udc->usb_state = USB_STATE_DEFAULT; |
| udc->ep0_state = WAIT_FOR_SETUP; |
| udc->ep0_dir = USB_DIR_OUT; |
| qe_usb_enable(udc); |
| return 0; |
| } |
| |
| static int bsy_irq(struct qe_udc *udc) |
| { |
| return 0; |
| } |
| |
| static int txe_irq(struct qe_udc *udc) |
| { |
| return 0; |
| } |
| |
| /* ep0 tx interrupt also in here */ |
| static int tx_irq(struct qe_udc *udc) |
| { |
| struct qe_ep *ep; |
| struct qe_bd __iomem *bd; |
| int i, res = 0; |
| |
| if ((udc->usb_state == USB_STATE_ADDRESS) |
| && (in_8(&udc->usb_regs->usb_usadr) == 0)) |
| out_8(&udc->usb_regs->usb_usadr, udc->device_address); |
| |
| for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) { |
| ep = &udc->eps[i]; |
| if (ep && ep->init && (ep->dir != USB_DIR_OUT)) { |
| bd = ep->c_txbd; |
| if (!(in_be32((u32 __iomem *)bd) & T_R) |
| && (in_be32(&bd->buf))) { |
| /* confirm the transmitted bd */ |
| if (ep->epnum == 0) |
| res = qe_ep0_txconf(ep); |
| else |
| res = qe_ep_txconf(ep); |
| } |
| } |
| } |
| return res; |
| } |
| |
| |
| /* setup packect's rx is handle in the function too */ |
| static void rx_irq(struct qe_udc *udc) |
| { |
| struct qe_ep *ep; |
| struct qe_bd __iomem *bd; |
| int i; |
| |
| for (i = 0; i < USB_MAX_ENDPOINTS; i++) { |
| ep = &udc->eps[i]; |
| if (ep && ep->init && (ep->dir != USB_DIR_IN)) { |
| bd = ep->n_rxbd; |
| if (!(in_be32((u32 __iomem *)bd) & R_E) |
| && (in_be32(&bd->buf))) { |
| if (ep->epnum == 0) { |
| qe_ep0_rx(udc); |
| } else { |
| /*non-setup package receive*/ |
| qe_ep_rx(ep); |
| } |
| } |
| } |
| } |
| } |
| |
| static irqreturn_t qe_udc_irq(int irq, void *_udc) |
| { |
| struct qe_udc *udc = (struct qe_udc *)_udc; |
| u16 irq_src; |
| irqreturn_t status = IRQ_NONE; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| irq_src = in_be16(&udc->usb_regs->usb_usber) & |
| in_be16(&udc->usb_regs->usb_usbmr); |
| /* Clear notification bits */ |
| out_be16(&udc->usb_regs->usb_usber, irq_src); |
| /* USB Interrupt */ |
| if (irq_src & USB_E_IDLE_MASK) { |
| idle_irq(udc); |
| irq_src &= ~USB_E_IDLE_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| if (irq_src & USB_E_TXB_MASK) { |
| tx_irq(udc); |
| irq_src &= ~USB_E_TXB_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| if (irq_src & USB_E_RXB_MASK) { |
| rx_irq(udc); |
| irq_src &= ~USB_E_RXB_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| if (irq_src & USB_E_RESET_MASK) { |
| reset_irq(udc); |
| irq_src &= ~USB_E_RESET_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| if (irq_src & USB_E_BSY_MASK) { |
| bsy_irq(udc); |
| irq_src &= ~USB_E_BSY_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| if (irq_src & USB_E_TXE_MASK) { |
| txe_irq(udc); |
| irq_src &= ~USB_E_TXE_MASK; |
| status = IRQ_HANDLED; |
| } |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| return status; |
| } |
| |
| /*------------------------------------------------------------------------- |
| Gadget driver probe and unregister. |
| --------------------------------------------------------------------------*/ |
| static int fsl_qe_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct qe_udc *udc; |
| unsigned long flags; |
| |
| udc = container_of(gadget, struct qe_udc, gadget); |
| /* lock is needed but whether should use this lock or another */ |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| driver->driver.bus = NULL; |
| /* hook up the driver */ |
| udc->driver = driver; |
| udc->gadget.speed = driver->max_speed; |
| |
| /* Enable IRQ reg and Set usbcmd reg EN bit */ |
| qe_usb_enable(udc); |
| |
| out_be16(&udc->usb_regs->usb_usber, 0xffff); |
| out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); |
| udc->usb_state = USB_STATE_ATTACHED; |
| udc->ep0_state = WAIT_FOR_SETUP; |
| udc->ep0_dir = USB_DIR_OUT; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| dev_info(udc->dev, "%s bind to driver %s\n", udc->gadget.name, |
| driver->driver.name); |
| return 0; |
| } |
| |
| static int fsl_qe_stop(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct qe_udc *udc; |
| struct qe_ep *loop_ep; |
| unsigned long flags; |
| |
| udc = container_of(gadget, struct qe_udc, gadget); |
| /* stop usb controller, disable intr */ |
| qe_usb_disable(udc); |
| |
| /* in fact, no needed */ |
| udc->usb_state = USB_STATE_ATTACHED; |
| udc->ep0_state = WAIT_FOR_SETUP; |
| udc->ep0_dir = 0; |
| |
| /* stand operation */ |
| spin_lock_irqsave(&udc->lock, flags); |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| nuke(&udc->eps[0], -ESHUTDOWN); |
| list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list) |
| nuke(loop_ep, -ESHUTDOWN); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| udc->driver = NULL; |
| |
| dev_info(udc->dev, "unregistered gadget driver '%s'\r\n", |
| driver->driver.name); |
| return 0; |
| } |
| |
| /* udc structure's alloc and setup, include ep-param alloc */ |
| static struct qe_udc *qe_udc_config(struct platform_device *ofdev) |
| { |
| struct qe_udc *udc; |
| struct device_node *np = ofdev->dev.of_node; |
| unsigned int tmp_addr = 0; |
| struct usb_device_para __iomem *usbpram; |
| unsigned int i; |
| u64 size; |
| u32 offset; |
| |
| udc = kzalloc(sizeof(*udc), GFP_KERNEL); |
| if (udc == NULL) { |
| dev_err(&ofdev->dev, "malloc udc failed\n"); |
| goto cleanup; |
| } |
| |
| udc->dev = &ofdev->dev; |
| |
| /* get default address of usb parameter in MURAM from device tree */ |
| offset = *of_get_address(np, 1, &size, NULL); |
| udc->usb_param = cpm_muram_addr(offset); |
| memset_io(udc->usb_param, 0, size); |
| |
| usbpram = udc->usb_param; |
| out_be16(&usbpram->frame_n, 0); |
| out_be32(&usbpram->rstate, 0); |
| |
| tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS * |
| sizeof(struct usb_ep_para)), |
| USB_EP_PARA_ALIGNMENT); |
| if (IS_ERR_VALUE(tmp_addr)) |
| goto cleanup; |
| |
| for (i = 0; i < USB_MAX_ENDPOINTS; i++) { |
| out_be16(&usbpram->epptr[i], (u16)tmp_addr); |
| udc->ep_param[i] = cpm_muram_addr(tmp_addr); |
| tmp_addr += 32; |
| } |
| |
| memset_io(udc->ep_param[0], 0, |
| USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para)); |
| |
| udc->resume_state = USB_STATE_NOTATTACHED; |
| udc->usb_state = USB_STATE_POWERED; |
| udc->ep0_dir = 0; |
| |
| spin_lock_init(&udc->lock); |
| return udc; |
| |
| cleanup: |
| kfree(udc); |
| return NULL; |
| } |
| |
| /* USB Controller register init */ |
| static int qe_udc_reg_init(struct qe_udc *udc) |
| { |
| struct usb_ctlr __iomem *qe_usbregs; |
| qe_usbregs = udc->usb_regs; |
| |
| /* Spec says that we must enable the USB controller to change mode. */ |
| out_8(&qe_usbregs->usb_usmod, 0x01); |
| /* Mode changed, now disable it, since muram isn't initialized yet. */ |
| out_8(&qe_usbregs->usb_usmod, 0x00); |
| |
| /* Initialize the rest. */ |
| out_be16(&qe_usbregs->usb_usbmr, 0); |
| out_8(&qe_usbregs->usb_uscom, 0); |
| out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); |
| |
| return 0; |
| } |
| |
| static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) |
| { |
| struct qe_ep *ep = &udc->eps[pipe_num]; |
| |
| ep->udc = udc; |
| strcpy(ep->name, ep_name[pipe_num]); |
| ep->ep.name = ep_name[pipe_num]; |
| |
| ep->ep.ops = &qe_ep_ops; |
| ep->stopped = 1; |
| ep->ep.maxpacket = (unsigned short) ~0; |
| ep->ep.desc = NULL; |
| ep->dir = 0xff; |
| ep->epnum = (u8)pipe_num; |
| ep->sent = 0; |
| ep->last = 0; |
| ep->init = 0; |
| ep->rxframe = NULL; |
| ep->txframe = NULL; |
| ep->tx_req = NULL; |
| ep->state = EP_STATE_IDLE; |
| ep->has_data = 0; |
| |
| /* the queue lists any req for this ep */ |
| INIT_LIST_HEAD(&ep->queue); |
| |
| /* gagdet.ep_list used for ep_autoconfig so no ep0*/ |
| if (pipe_num != 0) |
| list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); |
| |
| ep->gadget = &udc->gadget; |
| |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * UDC device Driver operation functions * |
| *----------------------------------------------------------------------*/ |
| static void qe_udc_release(struct device *dev) |
| { |
| struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev); |
| int i; |
| |
| complete(udc->done); |
| cpm_muram_free(cpm_muram_offset(udc->ep_param[0])); |
| for (i = 0; i < USB_MAX_ENDPOINTS; i++) |
| udc->ep_param[i] = NULL; |
| |
| kfree(udc); |
| } |
| |
| /* Driver probe functions */ |
| static const struct of_device_id qe_udc_match[]; |
| static int qe_udc_probe(struct platform_device *ofdev) |
| { |
| struct qe_udc *udc; |
| const struct of_device_id *match; |
| struct device_node *np = ofdev->dev.of_node; |
| struct qe_ep *ep; |
| unsigned int ret = 0; |
| unsigned int i; |
| const void *prop; |
| |
| match = of_match_device(qe_udc_match, &ofdev->dev); |
| if (!match) |
| return -EINVAL; |
| |
| prop = of_get_property(np, "mode", NULL); |
| if (!prop || strcmp(prop, "peripheral")) |
| return -ENODEV; |
| |
| /* Initialize the udc structure including QH member and other member */ |
| udc = qe_udc_config(ofdev); |
| if (!udc) { |
| dev_err(&ofdev->dev, "failed to initialize\n"); |
| return -ENOMEM; |
| } |
| |
| udc->soc_type = (unsigned long)match->data; |
| udc->usb_regs = of_iomap(np, 0); |
| if (!udc->usb_regs) { |
| ret = -ENOMEM; |
| goto err1; |
| } |
| |
| /* initialize usb hw reg except for regs for EP, |
| * leave usbintr reg untouched*/ |
| qe_udc_reg_init(udc); |
| |
| /* here comes the stand operations for probe |
| * set the qe_udc->gadget.xxx */ |
| udc->gadget.ops = &qe_gadget_ops; |
| |
| /* gadget.ep0 is a pointer */ |
| udc->gadget.ep0 = &udc->eps[0].ep; |
| |
| INIT_LIST_HEAD(&udc->gadget.ep_list); |
| |
| /* modify in register gadget process */ |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| |
| /* name: Identifies the controller hardware type. */ |
| udc->gadget.name = driver_name; |
| udc->gadget.dev.parent = &ofdev->dev; |
| |
| /* initialize qe_ep struct */ |
| for (i = 0; i < USB_MAX_ENDPOINTS ; i++) { |
| /* because the ep type isn't decide here so |
| * qe_ep_init() should be called in ep_enable() */ |
| |
| /* setup the qe_ep struct and link ep.ep.list |
| * into gadget.ep_list */ |
| qe_ep_config(udc, (unsigned char)i); |
| } |
| |
| /* ep0 initialization in here */ |
| ret = qe_ep_init(udc, 0, &qe_ep0_desc); |
| if (ret) |
| goto err2; |
| |
| /* create a buf for ZLP send, need to remain zeroed */ |
| udc->nullbuf = kzalloc(256, GFP_KERNEL); |
| if (udc->nullbuf == NULL) { |
| dev_err(udc->dev, "cannot alloc nullbuf\n"); |
| ret = -ENOMEM; |
| goto err3; |
| } |
| |
| /* buffer for data of get_status request */ |
| udc->statusbuf = kzalloc(2, GFP_KERNEL); |
| if (udc->statusbuf == NULL) { |
| ret = -ENOMEM; |
| goto err4; |
| } |
| |
| udc->nullp = virt_to_phys((void *)udc->nullbuf); |
| if (udc->nullp == DMA_ADDR_INVALID) { |
| udc->nullp = dma_map_single( |
| udc->gadget.dev.parent, |
| udc->nullbuf, |
| 256, |
| DMA_TO_DEVICE); |
| udc->nullmap = 1; |
| } else { |
| dma_sync_single_for_device(udc->gadget.dev.parent, |
| udc->nullp, 256, |
| DMA_TO_DEVICE); |
| } |
| |
| tasklet_init(&udc->rx_tasklet, ep_rx_tasklet, |
| (unsigned long)udc); |
| /* request irq and disable DR */ |
| udc->usb_irq = irq_of_parse_and_map(np, 0); |
| if (!udc->usb_irq) { |
| ret = -EINVAL; |
| goto err_noirq; |
| } |
| |
| ret = request_irq(udc->usb_irq, qe_udc_irq, 0, |
| driver_name, udc); |
| if (ret) { |
| dev_err(udc->dev, "cannot request irq %d err %d\n", |
| udc->usb_irq, ret); |
| goto err5; |
| } |
| |
| ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget, |
| qe_udc_release); |
| if (ret) |
| goto err6; |
| |
| platform_set_drvdata(ofdev, udc); |
| dev_info(udc->dev, |
| "%s USB controller initialized as device\n", |
| (udc->soc_type == PORT_QE) ? "QE" : "CPM"); |
| return 0; |
| |
| err6: |
| free_irq(udc->usb_irq, udc); |
| err5: |
| irq_dispose_mapping(udc->usb_irq); |
| err_noirq: |
| if (udc->nullmap) { |
| dma_unmap_single(udc->gadget.dev.parent, |
| udc->nullp, 256, |
| DMA_TO_DEVICE); |
| udc->nullp = DMA_ADDR_INVALID; |
| } else { |
| dma_sync_single_for_cpu(udc->gadget.dev.parent, |
| udc->nullp, 256, |
| DMA_TO_DEVICE); |
| } |
| kfree(udc->statusbuf); |
| err4: |
| kfree(udc->nullbuf); |
| err3: |
| ep = &udc->eps[0]; |
| cpm_muram_free(cpm_muram_offset(ep->rxbase)); |
| kfree(ep->rxframe); |
| kfree(ep->rxbuffer); |
| kfree(ep->txframe); |
| err2: |
| iounmap(udc->usb_regs); |
| err1: |
| kfree(udc); |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int qe_udc_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| return -ENOTSUPP; |
| } |
| |
| static int qe_udc_resume(struct platform_device *dev) |
| { |
| return -ENOTSUPP; |
| } |
| #endif |
| |
| static int qe_udc_remove(struct platform_device *ofdev) |
| { |
| struct qe_udc *udc = platform_get_drvdata(ofdev); |
| struct qe_ep *ep; |
| unsigned int size; |
| DECLARE_COMPLETION(done); |
| |
| usb_del_gadget_udc(&udc->gadget); |
| |
| udc->done = &done; |
| tasklet_disable(&udc->rx_tasklet); |
| |
| if (udc->nullmap) { |
| dma_unmap_single(udc->gadget.dev.parent, |
| udc->nullp, 256, |
| DMA_TO_DEVICE); |
| udc->nullp = DMA_ADDR_INVALID; |
| } else { |
| dma_sync_single_for_cpu(udc->gadget.dev.parent, |
| udc->nullp, 256, |
| DMA_TO_DEVICE); |
| } |
| kfree(udc->statusbuf); |
| kfree(udc->nullbuf); |
| |
| ep = &udc->eps[0]; |
| cpm_muram_free(cpm_muram_offset(ep->rxbase)); |
| size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1); |
| |
| kfree(ep->rxframe); |
| if (ep->rxbufmap) { |
| dma_unmap_single(udc->gadget.dev.parent, |
| ep->rxbuf_d, size, |
| DMA_FROM_DEVICE); |
| ep->rxbuf_d = DMA_ADDR_INVALID; |
| } else { |
| dma_sync_single_for_cpu(udc->gadget.dev.parent, |
| ep->rxbuf_d, size, |
| DMA_FROM_DEVICE); |
| } |
| |
| kfree(ep->rxbuffer); |
| kfree(ep->txframe); |
| |
| free_irq(udc->usb_irq, udc); |
| irq_dispose_mapping(udc->usb_irq); |
| |
| tasklet_kill(&udc->rx_tasklet); |
| |
| iounmap(udc->usb_regs); |
| |
| /* wait for release() of gadget.dev to free udc */ |
| wait_for_completion(&done); |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| static const struct of_device_id qe_udc_match[] = { |
| { |
| .compatible = "fsl,mpc8323-qe-usb", |
| .data = (void *)PORT_QE, |
| }, |
| { |
| .compatible = "fsl,mpc8360-qe-usb", |
| .data = (void *)PORT_QE, |
| }, |
| { |
| .compatible = "fsl,mpc8272-cpm-usb", |
| .data = (void *)PORT_CPM, |
| }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, qe_udc_match); |
| |
| static struct platform_driver udc_driver = { |
| .driver = { |
| .name = (char *)driver_name, |
| .owner = THIS_MODULE, |
| .of_match_table = qe_udc_match, |
| }, |
| .probe = qe_udc_probe, |
| .remove = qe_udc_remove, |
| #ifdef CONFIG_PM |
| .suspend = qe_udc_suspend, |
| .resume = qe_udc_resume, |
| #endif |
| }; |
| |
| module_platform_driver(udc_driver); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_LICENSE("GPL"); |
| |