| /* |
| * mac80211 glue code for mac80211 ST-Ericsson CW1200 drivers |
| * |
| * Copyright (c) 2010, ST-Ericsson |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
| * |
| * Based on: |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| * |
| * Based on: |
| * - the islsm (softmac prism54) driver, which is: |
| * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| * - stlc45xx driver |
| * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/random.h> |
| #include <linux/sched.h> |
| #include <net/mac80211.h> |
| |
| #include "cw1200.h" |
| #include "txrx.h" |
| #include "hwbus.h" |
| #include "fwio.h" |
| #include "hwio.h" |
| #include "bh.h" |
| #include "sta.h" |
| #include "scan.h" |
| #include "debug.h" |
| #include "pm.h" |
| |
| MODULE_AUTHOR("Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>"); |
| MODULE_DESCRIPTION("Softmac ST-Ericsson CW1200 common code"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("cw1200_core"); |
| |
| /* Accept MAC address of the form macaddr=0x00,0x80,0xE1,0x30,0x40,0x50 */ |
| static u8 cw1200_mac_template[ETH_ALEN] = {0x02, 0x80, 0xe1, 0x00, 0x00, 0x00}; |
| module_param_array_named(macaddr, cw1200_mac_template, byte, NULL, S_IRUGO); |
| MODULE_PARM_DESC(macaddr, "Override platform_data MAC address"); |
| |
| static char *cw1200_sdd_path; |
| module_param(cw1200_sdd_path, charp, 0644); |
| MODULE_PARM_DESC(cw1200_sdd_path, "Override platform_data SDD file"); |
| static int cw1200_refclk; |
| module_param(cw1200_refclk, int, 0644); |
| MODULE_PARM_DESC(cw1200_refclk, "Override platform_data reference clock"); |
| |
| int cw1200_power_mode = wsm_power_mode_quiescent; |
| module_param(cw1200_power_mode, int, 0644); |
| MODULE_PARM_DESC(cw1200_power_mode, "WSM power mode. 0 == active, 1 == doze, 2 == quiescent (default)"); |
| |
| #define RATETAB_ENT(_rate, _rateid, _flags) \ |
| { \ |
| .bitrate = (_rate), \ |
| .hw_value = (_rateid), \ |
| .flags = (_flags), \ |
| } |
| |
| static struct ieee80211_rate cw1200_rates[] = { |
| RATETAB_ENT(10, 0, 0), |
| RATETAB_ENT(20, 1, 0), |
| RATETAB_ENT(55, 2, 0), |
| RATETAB_ENT(110, 3, 0), |
| RATETAB_ENT(60, 6, 0), |
| RATETAB_ENT(90, 7, 0), |
| RATETAB_ENT(120, 8, 0), |
| RATETAB_ENT(180, 9, 0), |
| RATETAB_ENT(240, 10, 0), |
| RATETAB_ENT(360, 11, 0), |
| RATETAB_ENT(480, 12, 0), |
| RATETAB_ENT(540, 13, 0), |
| }; |
| |
| static struct ieee80211_rate cw1200_mcs_rates[] = { |
| RATETAB_ENT(65, 14, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(130, 15, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(195, 16, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(260, 17, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(390, 18, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(520, 19, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(585, 20, IEEE80211_TX_RC_MCS), |
| RATETAB_ENT(650, 21, IEEE80211_TX_RC_MCS), |
| }; |
| |
| #define cw1200_a_rates (cw1200_rates + 4) |
| #define cw1200_a_rates_size (ARRAY_SIZE(cw1200_rates) - 4) |
| #define cw1200_g_rates (cw1200_rates + 0) |
| #define cw1200_g_rates_size (ARRAY_SIZE(cw1200_rates)) |
| #define cw1200_n_rates (cw1200_mcs_rates) |
| #define cw1200_n_rates_size (ARRAY_SIZE(cw1200_mcs_rates)) |
| |
| |
| #define CHAN2G(_channel, _freq, _flags) { \ |
| .band = IEEE80211_BAND_2GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| #define CHAN5G(_channel, _flags) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .center_freq = 5000 + (5 * (_channel)), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| static struct ieee80211_channel cw1200_2ghz_chantable[] = { |
| CHAN2G(1, 2412, 0), |
| CHAN2G(2, 2417, 0), |
| CHAN2G(3, 2422, 0), |
| CHAN2G(4, 2427, 0), |
| CHAN2G(5, 2432, 0), |
| CHAN2G(6, 2437, 0), |
| CHAN2G(7, 2442, 0), |
| CHAN2G(8, 2447, 0), |
| CHAN2G(9, 2452, 0), |
| CHAN2G(10, 2457, 0), |
| CHAN2G(11, 2462, 0), |
| CHAN2G(12, 2467, 0), |
| CHAN2G(13, 2472, 0), |
| CHAN2G(14, 2484, 0), |
| }; |
| |
| static struct ieee80211_channel cw1200_5ghz_chantable[] = { |
| CHAN5G(34, 0), CHAN5G(36, 0), |
| CHAN5G(38, 0), CHAN5G(40, 0), |
| CHAN5G(42, 0), CHAN5G(44, 0), |
| CHAN5G(46, 0), CHAN5G(48, 0), |
| CHAN5G(52, 0), CHAN5G(56, 0), |
| CHAN5G(60, 0), CHAN5G(64, 0), |
| CHAN5G(100, 0), CHAN5G(104, 0), |
| CHAN5G(108, 0), CHAN5G(112, 0), |
| CHAN5G(116, 0), CHAN5G(120, 0), |
| CHAN5G(124, 0), CHAN5G(128, 0), |
| CHAN5G(132, 0), CHAN5G(136, 0), |
| CHAN5G(140, 0), CHAN5G(149, 0), |
| CHAN5G(153, 0), CHAN5G(157, 0), |
| CHAN5G(161, 0), CHAN5G(165, 0), |
| CHAN5G(184, 0), CHAN5G(188, 0), |
| CHAN5G(192, 0), CHAN5G(196, 0), |
| CHAN5G(200, 0), CHAN5G(204, 0), |
| CHAN5G(208, 0), CHAN5G(212, 0), |
| CHAN5G(216, 0), |
| }; |
| |
| static struct ieee80211_supported_band cw1200_band_2ghz = { |
| .channels = cw1200_2ghz_chantable, |
| .n_channels = ARRAY_SIZE(cw1200_2ghz_chantable), |
| .bitrates = cw1200_g_rates, |
| .n_bitrates = cw1200_g_rates_size, |
| .ht_cap = { |
| .cap = IEEE80211_HT_CAP_GRN_FLD | |
| (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | |
| IEEE80211_HT_CAP_MAX_AMSDU, |
| .ht_supported = 1, |
| .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, |
| .ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE, |
| .mcs = { |
| .rx_mask[0] = 0xFF, |
| .rx_highest = __cpu_to_le16(0x41), |
| .tx_params = IEEE80211_HT_MCS_TX_DEFINED, |
| }, |
| }, |
| }; |
| |
| static struct ieee80211_supported_band cw1200_band_5ghz = { |
| .channels = cw1200_5ghz_chantable, |
| .n_channels = ARRAY_SIZE(cw1200_5ghz_chantable), |
| .bitrates = cw1200_a_rates, |
| .n_bitrates = cw1200_a_rates_size, |
| .ht_cap = { |
| .cap = IEEE80211_HT_CAP_GRN_FLD | |
| (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | |
| IEEE80211_HT_CAP_MAX_AMSDU, |
| .ht_supported = 1, |
| .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, |
| .ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE, |
| .mcs = { |
| .rx_mask[0] = 0xFF, |
| .rx_highest = __cpu_to_le16(0x41), |
| .tx_params = IEEE80211_HT_MCS_TX_DEFINED, |
| }, |
| }, |
| }; |
| |
| static const unsigned long cw1200_ttl[] = { |
| 1 * HZ, /* VO */ |
| 2 * HZ, /* VI */ |
| 5 * HZ, /* BE */ |
| 10 * HZ /* BK */ |
| }; |
| |
| static const struct ieee80211_ops cw1200_ops = { |
| .start = cw1200_start, |
| .stop = cw1200_stop, |
| .add_interface = cw1200_add_interface, |
| .remove_interface = cw1200_remove_interface, |
| .change_interface = cw1200_change_interface, |
| .tx = cw1200_tx, |
| .hw_scan = cw1200_hw_scan, |
| .set_tim = cw1200_set_tim, |
| .sta_notify = cw1200_sta_notify, |
| .sta_add = cw1200_sta_add, |
| .sta_remove = cw1200_sta_remove, |
| .set_key = cw1200_set_key, |
| .set_rts_threshold = cw1200_set_rts_threshold, |
| .config = cw1200_config, |
| .bss_info_changed = cw1200_bss_info_changed, |
| .prepare_multicast = cw1200_prepare_multicast, |
| .configure_filter = cw1200_configure_filter, |
| .conf_tx = cw1200_conf_tx, |
| .get_stats = cw1200_get_stats, |
| .ampdu_action = cw1200_ampdu_action, |
| .flush = cw1200_flush, |
| #ifdef CONFIG_PM |
| .suspend = cw1200_wow_suspend, |
| .resume = cw1200_wow_resume, |
| #endif |
| /* Intentionally not offloaded: */ |
| /*.channel_switch = cw1200_channel_switch, */ |
| /*.remain_on_channel = cw1200_remain_on_channel, */ |
| /*.cancel_remain_on_channel = cw1200_cancel_remain_on_channel, */ |
| }; |
| |
| static int cw1200_ba_rx_tids = -1; |
| static int cw1200_ba_tx_tids = -1; |
| module_param(cw1200_ba_rx_tids, int, 0644); |
| module_param(cw1200_ba_tx_tids, int, 0644); |
| MODULE_PARM_DESC(cw1200_ba_rx_tids, "Block ACK RX TIDs"); |
| MODULE_PARM_DESC(cw1200_ba_tx_tids, "Block ACK TX TIDs"); |
| |
| #ifdef CONFIG_PM |
| static const struct wiphy_wowlan_support cw1200_wowlan_support = { |
| /* Support only for limited wowlan functionalities */ |
| .flags = WIPHY_WOWLAN_ANY | WIPHY_WOWLAN_DISCONNECT, |
| }; |
| #endif |
| |
| |
| static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr, |
| const bool have_5ghz) |
| { |
| int i, band; |
| struct ieee80211_hw *hw; |
| struct cw1200_common *priv; |
| |
| hw = ieee80211_alloc_hw(sizeof(struct cw1200_common), &cw1200_ops); |
| if (!hw) |
| return NULL; |
| |
| priv = hw->priv; |
| priv->hw = hw; |
| priv->hw_type = -1; |
| priv->mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->rates = cw1200_rates; /* TODO: fetch from FW */ |
| priv->mcs_rates = cw1200_n_rates; |
| if (cw1200_ba_rx_tids != -1) |
| priv->ba_rx_tid_mask = cw1200_ba_rx_tids; |
| else |
| priv->ba_rx_tid_mask = 0xFF; /* Enable RX BLKACK for all TIDs */ |
| if (cw1200_ba_tx_tids != -1) |
| priv->ba_tx_tid_mask = cw1200_ba_tx_tids; |
| else |
| priv->ba_tx_tid_mask = 0xff; /* Enable TX BLKACK for all TIDs */ |
| |
| hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_SUPPORTS_DYNAMIC_PS | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS | |
| IEEE80211_HW_SUPPORTS_UAPSD | |
| IEEE80211_HW_CONNECTION_MONITOR | |
| IEEE80211_HW_AMPDU_AGGREGATION | |
| IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | |
| IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC; |
| |
| hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_MESH_POINT) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_P2P_GO); |
| |
| #ifdef CONFIG_PM |
| hw->wiphy->wowlan = &cw1200_wowlan_support; |
| #endif |
| |
| hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; |
| |
| hw->channel_change_time = 1000; /* TODO: find actual value */ |
| hw->queues = 4; |
| |
| priv->rts_threshold = -1; |
| |
| hw->max_rates = 8; |
| hw->max_rate_tries = 15; |
| hw->extra_tx_headroom = WSM_TX_EXTRA_HEADROOM + |
| 8; /* TKIP IV */ |
| |
| hw->sta_data_size = sizeof(struct cw1200_sta_priv); |
| |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &cw1200_band_2ghz; |
| if (have_5ghz) |
| hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &cw1200_band_5ghz; |
| |
| /* Channel params have to be cleared before registering wiphy again */ |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { |
| struct ieee80211_supported_band *sband = hw->wiphy->bands[band]; |
| if (!sband) |
| continue; |
| for (i = 0; i < sband->n_channels; i++) { |
| sband->channels[i].flags = 0; |
| sband->channels[i].max_antenna_gain = 0; |
| sband->channels[i].max_power = 30; |
| } |
| } |
| |
| hw->wiphy->max_scan_ssids = 2; |
| hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; |
| |
| if (macaddr) |
| SET_IEEE80211_PERM_ADDR(hw, (u8 *)macaddr); |
| else |
| SET_IEEE80211_PERM_ADDR(hw, cw1200_mac_template); |
| |
| /* Fix up mac address if necessary */ |
| if (hw->wiphy->perm_addr[3] == 0 && |
| hw->wiphy->perm_addr[4] == 0 && |
| hw->wiphy->perm_addr[5] == 0) { |
| get_random_bytes(&hw->wiphy->perm_addr[3], 3); |
| } |
| |
| mutex_init(&priv->wsm_cmd_mux); |
| mutex_init(&priv->conf_mutex); |
| priv->workqueue = create_singlethread_workqueue("cw1200_wq"); |
| sema_init(&priv->scan.lock, 1); |
| INIT_WORK(&priv->scan.work, cw1200_scan_work); |
| INIT_DELAYED_WORK(&priv->scan.probe_work, cw1200_probe_work); |
| INIT_DELAYED_WORK(&priv->scan.timeout, cw1200_scan_timeout); |
| INIT_DELAYED_WORK(&priv->clear_recent_scan_work, |
| cw1200_clear_recent_scan_work); |
| INIT_DELAYED_WORK(&priv->join_timeout, cw1200_join_timeout); |
| INIT_WORK(&priv->unjoin_work, cw1200_unjoin_work); |
| INIT_WORK(&priv->join_complete_work, cw1200_join_complete_work); |
| INIT_WORK(&priv->wep_key_work, cw1200_wep_key_work); |
| INIT_WORK(&priv->tx_policy_upload_work, tx_policy_upload_work); |
| spin_lock_init(&priv->event_queue_lock); |
| INIT_LIST_HEAD(&priv->event_queue); |
| INIT_WORK(&priv->event_handler, cw1200_event_handler); |
| INIT_DELAYED_WORK(&priv->bss_loss_work, cw1200_bss_loss_work); |
| INIT_WORK(&priv->bss_params_work, cw1200_bss_params_work); |
| spin_lock_init(&priv->bss_loss_lock); |
| spin_lock_init(&priv->ps_state_lock); |
| INIT_WORK(&priv->set_cts_work, cw1200_set_cts_work); |
| INIT_WORK(&priv->set_tim_work, cw1200_set_tim_work); |
| INIT_WORK(&priv->multicast_start_work, cw1200_multicast_start_work); |
| INIT_WORK(&priv->multicast_stop_work, cw1200_multicast_stop_work); |
| INIT_WORK(&priv->link_id_work, cw1200_link_id_work); |
| INIT_DELAYED_WORK(&priv->link_id_gc_work, cw1200_link_id_gc_work); |
| INIT_WORK(&priv->linkid_reset_work, cw1200_link_id_reset); |
| INIT_WORK(&priv->update_filtering_work, cw1200_update_filtering_work); |
| INIT_WORK(&priv->set_beacon_wakeup_period_work, |
| cw1200_set_beacon_wakeup_period_work); |
| init_timer(&priv->mcast_timeout); |
| priv->mcast_timeout.data = (unsigned long)priv; |
| priv->mcast_timeout.function = cw1200_mcast_timeout; |
| |
| if (cw1200_queue_stats_init(&priv->tx_queue_stats, |
| CW1200_LINK_ID_MAX, |
| cw1200_skb_dtor, |
| priv)) { |
| ieee80211_free_hw(hw); |
| return NULL; |
| } |
| |
| for (i = 0; i < 4; ++i) { |
| if (cw1200_queue_init(&priv->tx_queue[i], |
| &priv->tx_queue_stats, i, 16, |
| cw1200_ttl[i])) { |
| for (; i > 0; i--) |
| cw1200_queue_deinit(&priv->tx_queue[i - 1]); |
| cw1200_queue_stats_deinit(&priv->tx_queue_stats); |
| ieee80211_free_hw(hw); |
| return NULL; |
| } |
| } |
| |
| init_waitqueue_head(&priv->channel_switch_done); |
| init_waitqueue_head(&priv->wsm_cmd_wq); |
| init_waitqueue_head(&priv->wsm_startup_done); |
| init_waitqueue_head(&priv->ps_mode_switch_done); |
| wsm_buf_init(&priv->wsm_cmd_buf); |
| spin_lock_init(&priv->wsm_cmd.lock); |
| priv->wsm_cmd.done = 1; |
| tx_policy_init(priv); |
| |
| return hw; |
| } |
| |
| static int cw1200_register_common(struct ieee80211_hw *dev) |
| { |
| struct cw1200_common *priv = dev->priv; |
| int err; |
| |
| #ifdef CONFIG_PM |
| err = cw1200_pm_init(&priv->pm_state, priv); |
| if (err) { |
| pr_err("Cannot init PM. (%d).\n", |
| err); |
| return err; |
| } |
| #endif |
| |
| err = ieee80211_register_hw(dev); |
| if (err) { |
| pr_err("Cannot register device (%d).\n", |
| err); |
| #ifdef CONFIG_PM |
| cw1200_pm_deinit(&priv->pm_state); |
| #endif |
| return err; |
| } |
| |
| cw1200_debug_init(priv); |
| |
| pr_info("Registered as '%s'\n", wiphy_name(dev->wiphy)); |
| return 0; |
| } |
| |
| static void cw1200_free_common(struct ieee80211_hw *dev) |
| { |
| ieee80211_free_hw(dev); |
| } |
| |
| static void cw1200_unregister_common(struct ieee80211_hw *dev) |
| { |
| struct cw1200_common *priv = dev->priv; |
| int i; |
| |
| ieee80211_unregister_hw(dev); |
| |
| del_timer_sync(&priv->mcast_timeout); |
| cw1200_unregister_bh(priv); |
| |
| cw1200_debug_release(priv); |
| |
| mutex_destroy(&priv->conf_mutex); |
| |
| wsm_buf_deinit(&priv->wsm_cmd_buf); |
| |
| destroy_workqueue(priv->workqueue); |
| priv->workqueue = NULL; |
| |
| if (priv->sdd) { |
| release_firmware(priv->sdd); |
| priv->sdd = NULL; |
| } |
| |
| for (i = 0; i < 4; ++i) |
| cw1200_queue_deinit(&priv->tx_queue[i]); |
| |
| cw1200_queue_stats_deinit(&priv->tx_queue_stats); |
| #ifdef CONFIG_PM |
| cw1200_pm_deinit(&priv->pm_state); |
| #endif |
| } |
| |
| /* Clock is in KHz */ |
| u32 cw1200_dpll_from_clk(u16 clk_khz) |
| { |
| switch (clk_khz) { |
| case 0x32C8: /* 13000 KHz */ |
| return 0x1D89D241; |
| case 0x3E80: /* 16000 KHz */ |
| return 0x000001E1; |
| case 0x41A0: /* 16800 KHz */ |
| return 0x124931C1; |
| case 0x4B00: /* 19200 KHz */ |
| return 0x00000191; |
| case 0x5DC0: /* 24000 KHz */ |
| return 0x00000141; |
| case 0x6590: /* 26000 KHz */ |
| return 0x0EC4F121; |
| case 0x8340: /* 33600 KHz */ |
| return 0x092490E1; |
| case 0x9600: /* 38400 KHz */ |
| return 0x100010C1; |
| case 0x9C40: /* 40000 KHz */ |
| return 0x000000C1; |
| case 0xBB80: /* 48000 KHz */ |
| return 0x000000A1; |
| case 0xCB20: /* 52000 KHz */ |
| return 0x07627091; |
| default: |
| pr_err("Unknown Refclk freq (0x%04x), using 26000KHz\n", |
| clk_khz); |
| return 0x0EC4F121; |
| } |
| } |
| |
| int cw1200_core_probe(const struct hwbus_ops *hwbus_ops, |
| struct hwbus_priv *hwbus, |
| struct device *pdev, |
| struct cw1200_common **core, |
| int ref_clk, const u8 *macaddr, |
| const char *sdd_path, bool have_5ghz) |
| { |
| int err = -EINVAL; |
| struct ieee80211_hw *dev; |
| struct cw1200_common *priv; |
| struct wsm_operational_mode mode = { |
| .power_mode = cw1200_power_mode, |
| .disable_more_flag_usage = true, |
| }; |
| |
| dev = cw1200_init_common(macaddr, have_5ghz); |
| if (!dev) |
| goto err; |
| |
| priv = dev->priv; |
| priv->hw_refclk = ref_clk; |
| if (cw1200_refclk) |
| priv->hw_refclk = cw1200_refclk; |
| |
| priv->sdd_path = (char *)sdd_path; |
| if (cw1200_sdd_path) |
| priv->sdd_path = cw1200_sdd_path; |
| |
| priv->hwbus_ops = hwbus_ops; |
| priv->hwbus_priv = hwbus; |
| priv->pdev = pdev; |
| SET_IEEE80211_DEV(priv->hw, pdev); |
| |
| /* Pass struct cw1200_common back up */ |
| *core = priv; |
| |
| err = cw1200_register_bh(priv); |
| if (err) |
| goto err1; |
| |
| err = cw1200_load_firmware(priv); |
| if (err) |
| goto err2; |
| |
| if (wait_event_interruptible_timeout(priv->wsm_startup_done, |
| priv->firmware_ready, |
| 3*HZ) <= 0) { |
| /* TODO: Need to find how to reset device |
| in QUEUE mode properly. |
| */ |
| pr_err("Timeout waiting on device startup\n"); |
| err = -ETIMEDOUT; |
| goto err2; |
| } |
| |
| /* Set low-power mode. */ |
| wsm_set_operational_mode(priv, &mode); |
| |
| /* Enable multi-TX confirmation */ |
| wsm_use_multi_tx_conf(priv, true); |
| |
| err = cw1200_register_common(dev); |
| if (err) |
| goto err2; |
| |
| return err; |
| |
| err2: |
| cw1200_unregister_bh(priv); |
| err1: |
| cw1200_free_common(dev); |
| err: |
| *core = NULL; |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(cw1200_core_probe); |
| |
| void cw1200_core_release(struct cw1200_common *self) |
| { |
| /* Disable device interrupts */ |
| self->hwbus_ops->lock(self->hwbus_priv); |
| __cw1200_irq_enable(self, 0); |
| self->hwbus_ops->unlock(self->hwbus_priv); |
| |
| /* And then clean up */ |
| cw1200_unregister_common(self->hw); |
| cw1200_free_common(self->hw); |
| return; |
| } |
| EXPORT_SYMBOL_GPL(cw1200_core_release); |