| /* |
| * Copyright 2006 Dave Airlie <airlied@linux.ie> |
| * Copyright © 2006-2007 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| */ |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include "intel_drv.h" |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "dvo.h" |
| |
| #define SIL164_ADDR 0x38 |
| #define CH7xxx_ADDR 0x76 |
| #define TFP410_ADDR 0x38 |
| #define NS2501_ADDR 0x38 |
| |
| static const struct intel_dvo_device intel_dvo_devices[] = { |
| { |
| .type = INTEL_DVO_CHIP_TMDS, |
| .name = "sil164", |
| .dvo_reg = DVOC, |
| .slave_addr = SIL164_ADDR, |
| .dev_ops = &sil164_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_TMDS, |
| .name = "ch7xxx", |
| .dvo_reg = DVOC, |
| .slave_addr = CH7xxx_ADDR, |
| .dev_ops = &ch7xxx_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_TMDS, |
| .name = "ch7xxx", |
| .dvo_reg = DVOC, |
| .slave_addr = 0x75, /* For some ch7010 */ |
| .dev_ops = &ch7xxx_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_LVDS, |
| .name = "ivch", |
| .dvo_reg = DVOA, |
| .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ |
| .dev_ops = &ivch_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_TMDS, |
| .name = "tfp410", |
| .dvo_reg = DVOC, |
| .slave_addr = TFP410_ADDR, |
| .dev_ops = &tfp410_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_LVDS, |
| .name = "ch7017", |
| .dvo_reg = DVOC, |
| .slave_addr = 0x75, |
| .gpio = GMBUS_PORT_DPB, |
| .dev_ops = &ch7017_ops, |
| }, |
| { |
| .type = INTEL_DVO_CHIP_TMDS, |
| .name = "ns2501", |
| .dvo_reg = DVOC, |
| .slave_addr = NS2501_ADDR, |
| .dev_ops = &ns2501_ops, |
| } |
| }; |
| |
| struct intel_dvo { |
| struct intel_encoder base; |
| |
| struct intel_dvo_device dev; |
| |
| struct drm_display_mode *panel_fixed_mode; |
| bool panel_wants_dither; |
| }; |
| |
| static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder) |
| { |
| return container_of(encoder, struct intel_dvo, base); |
| } |
| |
| static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector) |
| { |
| return enc_to_dvo(intel_attached_encoder(connector)); |
| } |
| |
| static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector) |
| { |
| struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base); |
| |
| return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev); |
| } |
| |
| static bool intel_dvo_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| u32 tmp; |
| |
| tmp = I915_READ(intel_dvo->dev.dvo_reg); |
| |
| if (!(tmp & DVO_ENABLE)) |
| return false; |
| |
| *pipe = PORT_TO_PIPE(tmp); |
| |
| return true; |
| } |
| |
| static void intel_dvo_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| u32 tmp, flags = 0; |
| |
| tmp = I915_READ(intel_dvo->dev.dvo_reg); |
| if (tmp & DVO_HSYNC_ACTIVE_HIGH) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| if (tmp & DVO_VSYNC_ACTIVE_HIGH) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| pipe_config->adjusted_mode.flags |= flags; |
| } |
| |
| static void intel_disable_dvo(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| u32 dvo_reg = intel_dvo->dev.dvo_reg; |
| u32 temp = I915_READ(dvo_reg); |
| |
| intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false); |
| I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); |
| I915_READ(dvo_reg); |
| } |
| |
| static void intel_enable_dvo(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| u32 dvo_reg = intel_dvo->dev.dvo_reg; |
| u32 temp = I915_READ(dvo_reg); |
| |
| I915_WRITE(dvo_reg, temp | DVO_ENABLE); |
| I915_READ(dvo_reg); |
| intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true); |
| } |
| |
| /* Special dpms function to support cloning between dvo/sdvo/crt. */ |
| static void intel_dvo_dpms(struct drm_connector *connector, int mode) |
| { |
| struct intel_dvo *intel_dvo = intel_attached_dvo(connector); |
| struct drm_crtc *crtc; |
| |
| /* dvo supports only 2 dpms states. */ |
| if (mode != DRM_MODE_DPMS_ON) |
| mode = DRM_MODE_DPMS_OFF; |
| |
| if (mode == connector->dpms) |
| return; |
| |
| connector->dpms = mode; |
| |
| /* Only need to change hw state when actually enabled */ |
| crtc = intel_dvo->base.base.crtc; |
| if (!crtc) { |
| intel_dvo->base.connectors_active = false; |
| return; |
| } |
| |
| /* We call connector dpms manually below in case pipe dpms doesn't |
| * change due to cloning. */ |
| if (mode == DRM_MODE_DPMS_ON) { |
| intel_dvo->base.connectors_active = true; |
| |
| intel_crtc_update_dpms(crtc); |
| |
| intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true); |
| } else { |
| intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false); |
| |
| intel_dvo->base.connectors_active = false; |
| |
| intel_crtc_update_dpms(crtc); |
| } |
| |
| intel_modeset_check_state(connector->dev); |
| } |
| |
| static int intel_dvo_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_dvo *intel_dvo = intel_attached_dvo(connector); |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return MODE_NO_DBLESCAN; |
| |
| /* XXX: Validate clock range */ |
| |
| if (intel_dvo->panel_fixed_mode) { |
| if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay) |
| return MODE_PANEL; |
| if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay) |
| return MODE_PANEL; |
| } |
| |
| return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode); |
| } |
| |
| static bool intel_dvo_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config) |
| { |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; |
| |
| /* If we have timings from the BIOS for the panel, put them in |
| * to the adjusted mode. The CRTC will be set up for this mode, |
| * with the panel scaling set up to source from the H/VDisplay |
| * of the original mode. |
| */ |
| if (intel_dvo->panel_fixed_mode != NULL) { |
| #define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x |
| C(hdisplay); |
| C(hsync_start); |
| C(hsync_end); |
| C(htotal); |
| C(vdisplay); |
| C(vsync_start); |
| C(vsync_end); |
| C(vtotal); |
| C(clock); |
| #undef C |
| |
| drm_mode_set_crtcinfo(adjusted_mode, 0); |
| } |
| |
| if (intel_dvo->dev.dev_ops->mode_fixup) |
| return intel_dvo->dev.dev_ops->mode_fixup(&intel_dvo->dev, |
| &pipe_config->requested_mode, |
| adjusted_mode); |
| |
| return true; |
| } |
| |
| static void intel_dvo_mode_set(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode; |
| struct intel_dvo *intel_dvo = enc_to_dvo(encoder); |
| int pipe = crtc->pipe; |
| u32 dvo_val; |
| u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg; |
| |
| switch (dvo_reg) { |
| case DVOA: |
| default: |
| dvo_srcdim_reg = DVOA_SRCDIM; |
| break; |
| case DVOB: |
| dvo_srcdim_reg = DVOB_SRCDIM; |
| break; |
| case DVOC: |
| dvo_srcdim_reg = DVOC_SRCDIM; |
| break; |
| } |
| |
| intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev, |
| &crtc->config.requested_mode, |
| adjusted_mode); |
| |
| /* Save the data order, since I don't know what it should be set to. */ |
| dvo_val = I915_READ(dvo_reg) & |
| (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); |
| dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | |
| DVO_BLANK_ACTIVE_HIGH; |
| |
| if (pipe == 1) |
| dvo_val |= DVO_PIPE_B_SELECT; |
| dvo_val |= DVO_PIPE_STALL; |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) |
| dvo_val |= DVO_HSYNC_ACTIVE_HIGH; |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) |
| dvo_val |= DVO_VSYNC_ACTIVE_HIGH; |
| |
| /*I915_WRITE(DVOB_SRCDIM, |
| (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | |
| (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ |
| I915_WRITE(dvo_srcdim_reg, |
| (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | |
| (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT)); |
| /*I915_WRITE(DVOB, dvo_val);*/ |
| I915_WRITE(dvo_reg, dvo_val); |
| } |
| |
| /** |
| * Detect the output connection on our DVO device. |
| * |
| * Unimplemented. |
| */ |
| static enum drm_connector_status |
| intel_dvo_detect(struct drm_connector *connector, bool force) |
| { |
| struct intel_dvo *intel_dvo = intel_attached_dvo(connector); |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, drm_get_connector_name(connector)); |
| return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev); |
| } |
| |
| static int intel_dvo_get_modes(struct drm_connector *connector) |
| { |
| struct intel_dvo *intel_dvo = intel_attached_dvo(connector); |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| |
| /* We should probably have an i2c driver get_modes function for those |
| * devices which will have a fixed set of modes determined by the chip |
| * (TV-out, for example), but for now with just TMDS and LVDS, |
| * that's not the case. |
| */ |
| intel_ddc_get_modes(connector, |
| intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC)); |
| if (!list_empty(&connector->probed_modes)) |
| return 1; |
| |
| if (intel_dvo->panel_fixed_mode != NULL) { |
| struct drm_display_mode *mode; |
| mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void intel_dvo_destroy(struct drm_connector *connector) |
| { |
| drm_sysfs_connector_remove(connector); |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| static const struct drm_connector_funcs intel_dvo_connector_funcs = { |
| .dpms = intel_dvo_dpms, |
| .detect = intel_dvo_detect, |
| .destroy = intel_dvo_destroy, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| }; |
| |
| static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = { |
| .mode_valid = intel_dvo_mode_valid, |
| .get_modes = intel_dvo_get_modes, |
| .best_encoder = intel_best_encoder, |
| }; |
| |
| static void intel_dvo_enc_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder)); |
| |
| if (intel_dvo->dev.dev_ops->destroy) |
| intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev); |
| |
| kfree(intel_dvo->panel_fixed_mode); |
| |
| intel_encoder_destroy(encoder); |
| } |
| |
| static const struct drm_encoder_funcs intel_dvo_enc_funcs = { |
| .destroy = intel_dvo_enc_destroy, |
| }; |
| |
| /** |
| * Attempts to get a fixed panel timing for LVDS (currently only the i830). |
| * |
| * Other chips with DVO LVDS will need to extend this to deal with the LVDS |
| * chip being on DVOB/C and having multiple pipes. |
| */ |
| static struct drm_display_mode * |
| intel_dvo_get_current_mode(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_dvo *intel_dvo = intel_attached_dvo(connector); |
| uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg); |
| struct drm_display_mode *mode = NULL; |
| |
| /* If the DVO port is active, that'll be the LVDS, so we can pull out |
| * its timings to get how the BIOS set up the panel. |
| */ |
| if (dvo_val & DVO_ENABLE) { |
| struct drm_crtc *crtc; |
| int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0; |
| |
| crtc = intel_get_crtc_for_pipe(dev, pipe); |
| if (crtc) { |
| mode = intel_crtc_mode_get(dev, crtc); |
| if (mode) { |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| if (dvo_val & DVO_HSYNC_ACTIVE_HIGH) |
| mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| if (dvo_val & DVO_VSYNC_ACTIVE_HIGH) |
| mode->flags |= DRM_MODE_FLAG_PVSYNC; |
| } |
| } |
| } |
| |
| return mode; |
| } |
| |
| void intel_dvo_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_encoder *intel_encoder; |
| struct intel_dvo *intel_dvo; |
| struct intel_connector *intel_connector; |
| int i; |
| int encoder_type = DRM_MODE_ENCODER_NONE; |
| |
| intel_dvo = kzalloc(sizeof(struct intel_dvo), GFP_KERNEL); |
| if (!intel_dvo) |
| return; |
| |
| intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); |
| if (!intel_connector) { |
| kfree(intel_dvo); |
| return; |
| } |
| |
| intel_encoder = &intel_dvo->base; |
| drm_encoder_init(dev, &intel_encoder->base, |
| &intel_dvo_enc_funcs, encoder_type); |
| |
| intel_encoder->disable = intel_disable_dvo; |
| intel_encoder->enable = intel_enable_dvo; |
| intel_encoder->get_hw_state = intel_dvo_get_hw_state; |
| intel_encoder->get_config = intel_dvo_get_config; |
| intel_encoder->compute_config = intel_dvo_compute_config; |
| intel_encoder->mode_set = intel_dvo_mode_set; |
| intel_connector->get_hw_state = intel_dvo_connector_get_hw_state; |
| |
| /* Now, try to find a controller */ |
| for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { |
| struct drm_connector *connector = &intel_connector->base; |
| const struct intel_dvo_device *dvo = &intel_dvo_devices[i]; |
| struct i2c_adapter *i2c; |
| int gpio; |
| bool dvoinit; |
| |
| /* Allow the I2C driver info to specify the GPIO to be used in |
| * special cases, but otherwise default to what's defined |
| * in the spec. |
| */ |
| if (intel_gmbus_is_port_valid(dvo->gpio)) |
| gpio = dvo->gpio; |
| else if (dvo->type == INTEL_DVO_CHIP_LVDS) |
| gpio = GMBUS_PORT_SSC; |
| else |
| gpio = GMBUS_PORT_DPB; |
| |
| /* Set up the I2C bus necessary for the chip we're probing. |
| * It appears that everything is on GPIOE except for panels |
| * on i830 laptops, which are on GPIOB (DVOA). |
| */ |
| i2c = intel_gmbus_get_adapter(dev_priv, gpio); |
| |
| intel_dvo->dev = *dvo; |
| |
| /* GMBUS NAK handling seems to be unstable, hence let the |
| * transmitter detection run in bit banging mode for now. |
| */ |
| intel_gmbus_force_bit(i2c, true); |
| |
| dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c); |
| |
| intel_gmbus_force_bit(i2c, false); |
| |
| if (!dvoinit) |
| continue; |
| |
| intel_encoder->type = INTEL_OUTPUT_DVO; |
| intel_encoder->crtc_mask = (1 << 0) | (1 << 1); |
| switch (dvo->type) { |
| case INTEL_DVO_CHIP_TMDS: |
| intel_encoder->cloneable = true; |
| drm_connector_init(dev, connector, |
| &intel_dvo_connector_funcs, |
| DRM_MODE_CONNECTOR_DVII); |
| encoder_type = DRM_MODE_ENCODER_TMDS; |
| break; |
| case INTEL_DVO_CHIP_LVDS: |
| intel_encoder->cloneable = false; |
| drm_connector_init(dev, connector, |
| &intel_dvo_connector_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| encoder_type = DRM_MODE_ENCODER_LVDS; |
| break; |
| } |
| |
| drm_connector_helper_add(connector, |
| &intel_dvo_connector_helper_funcs); |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| connector->interlace_allowed = false; |
| connector->doublescan_allowed = false; |
| |
| intel_connector_attach_encoder(intel_connector, intel_encoder); |
| if (dvo->type == INTEL_DVO_CHIP_LVDS) { |
| /* For our LVDS chipsets, we should hopefully be able |
| * to dig the fixed panel mode out of the BIOS data. |
| * However, it's in a different format from the BIOS |
| * data on chipsets with integrated LVDS (stored in AIM |
| * headers, likely), so for now, just get the current |
| * mode being output through DVO. |
| */ |
| intel_dvo->panel_fixed_mode = |
| intel_dvo_get_current_mode(connector); |
| intel_dvo->panel_wants_dither = true; |
| } |
| |
| drm_sysfs_connector_add(connector); |
| return; |
| } |
| |
| drm_encoder_cleanup(&intel_encoder->base); |
| kfree(intel_dvo); |
| kfree(intel_connector); |
| } |