| /* |
| * SoC specific header file for the AT91SAM9N12 |
| * |
| * Copyright (C) 2012 Atmel Corporation |
| * |
| * Common definitions, based on AT91SAM9N12 SoC datasheet |
| * |
| * Licensed under GPLv2 or later |
| */ |
| |
| #ifndef _AT91SAM9N12_H_ |
| #define _AT91SAM9N12_H_ |
| |
| /* |
| * Peripheral identifiers/interrupts. |
| */ |
| #define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */ |
| #define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */ |
| #define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */ |
| #define AT91SAM9N12_ID_USART0 5 /* USART 0 */ |
| #define AT91SAM9N12_ID_USART1 6 /* USART 1 */ |
| #define AT91SAM9N12_ID_USART2 7 /* USART 2 */ |
| #define AT91SAM9N12_ID_USART3 8 /* USART 3 */ |
| #define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */ |
| #define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */ |
| #define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */ |
| #define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */ |
| #define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */ |
| #define AT91SAM9N12_ID_UART0 15 /* UART 0 */ |
| #define AT91SAM9N12_ID_UART1 16 /* UART 1 */ |
| #define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ |
| #define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */ |
| #define AT91SAM9N12_ID_ADC 19 /* ADC Controller */ |
| #define AT91SAM9N12_ID_DMA 20 /* DMA Controller */ |
| #define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */ |
| #define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */ |
| #define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */ |
| #define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */ |
| #define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */ |
| #define AT91SAM9N12_ID_TRNG 30 /* TRNG */ |
| #define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */ |
| |
| /* |
| * User Peripheral physical base addresses. |
| */ |
| #define AT91SAM9N12_BASE_USART0 0xf801c000 |
| #define AT91SAM9N12_BASE_USART1 0xf8020000 |
| #define AT91SAM9N12_BASE_USART2 0xf8024000 |
| #define AT91SAM9N12_BASE_USART3 0xf8028000 |
| |
| /* |
| * Internal Memory. |
| */ |
| #define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */ |
| #define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ |
| |
| #define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */ |
| #define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ |
| |
| #endif |
