| /* |
| * Copyright (c) 1999-2001 Vojtech Pavlik |
| * |
| * Based on the work of: |
| * David Thompson |
| */ |
| |
| /* |
| * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Should you need to contact me, the author, you can do so either by |
| * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: |
| * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| |
| #define DRIVER_DESC "SpaceTec SpaceOrb 360 and Avenger 6dof controller driver" |
| |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Constants. |
| */ |
| |
| #define SPACEORB_MAX_LENGTH 64 |
| |
| static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; |
| static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; |
| |
| /* |
| * Per-Orb data. |
| */ |
| |
| struct spaceorb { |
| struct input_dev *dev; |
| int idx; |
| unsigned char data[SPACEORB_MAX_LENGTH]; |
| char phys[32]; |
| }; |
| |
| static unsigned char spaceorb_xor[] = "SpaceWare"; |
| |
| static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout", |
| "Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" }; |
| |
| /* |
| * spaceorb_process_packet() decodes packets the driver receives from the |
| * SpaceOrb. |
| */ |
| |
| static void spaceorb_process_packet(struct spaceorb *spaceorb) |
| { |
| struct input_dev *dev = spaceorb->dev; |
| unsigned char *data = spaceorb->data; |
| unsigned char c = 0; |
| int axes[6]; |
| int i; |
| |
| if (spaceorb->idx < 2) return; |
| for (i = 0; i < spaceorb->idx; i++) c ^= data[i]; |
| if (c) return; |
| |
| switch (data[0]) { |
| |
| case 'R': /* Reset packet */ |
| spaceorb->data[spaceorb->idx - 1] = 0; |
| for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); |
| printk(KERN_INFO "input: %s [%s] is %s\n", |
| dev->name, spaceorb->data + i, spaceorb->phys); |
| break; |
| |
| case 'D': /* Ball + button data */ |
| if (spaceorb->idx != 12) return; |
| for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i]; |
| axes[0] = ( data[2] << 3) | (data[ 3] >> 4); |
| axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1); |
| axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5); |
| axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2); |
| axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6); |
| axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3); |
| for (i = 0; i < 6; i++) |
| input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0)); |
| for (i = 0; i < 6; i++) |
| input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1); |
| break; |
| |
| case 'K': /* Button data */ |
| if (spaceorb->idx != 5) return; |
| for (i = 0; i < 6; i++) |
| input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1); |
| |
| break; |
| |
| case 'E': /* Error packet */ |
| if (spaceorb->idx != 4) return; |
| printk(KERN_ERR "spaceorb: Device error. [ "); |
| for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); |
| printk("]\n"); |
| break; |
| } |
| |
| input_sync(dev); |
| } |
| |
| static irqreturn_t spaceorb_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct spaceorb* spaceorb = serio_get_drvdata(serio); |
| |
| if (~data & 0x80) { |
| if (spaceorb->idx) spaceorb_process_packet(spaceorb); |
| spaceorb->idx = 0; |
| } |
| if (spaceorb->idx < SPACEORB_MAX_LENGTH) |
| spaceorb->data[spaceorb->idx++] = data & 0x7f; |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * spaceorb_disconnect() is the opposite of spaceorb_connect() |
| */ |
| |
| static void spaceorb_disconnect(struct serio *serio) |
| { |
| struct spaceorb* spaceorb = serio_get_drvdata(serio); |
| |
| serio_close(serio); |
| serio_set_drvdata(serio, NULL); |
| input_unregister_device(spaceorb->dev); |
| kfree(spaceorb); |
| } |
| |
| /* |
| * spaceorb_connect() is the routine that is called when someone adds a |
| * new serio device that supports SpaceOrb/Avenger protocol and registers |
| * it as an input device. |
| */ |
| |
| static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct spaceorb *spaceorb; |
| struct input_dev *input_dev; |
| int err = -ENOMEM; |
| int i; |
| |
| spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!spaceorb || !input_dev) |
| goto fail1; |
| |
| spaceorb->dev = input_dev; |
| snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys); |
| |
| input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; |
| input_dev->phys = spaceorb->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_SPACEORB; |
| input_dev->id.product = 0x0001; |
| input_dev->id.version = 0x0100; |
| input_dev->dev.parent = &serio->dev; |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); |
| |
| for (i = 0; i < 6; i++) |
| set_bit(spaceorb_buttons[i], input_dev->keybit); |
| |
| for (i = 0; i < 6; i++) |
| input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); |
| |
| serio_set_drvdata(serio, spaceorb); |
| |
| err = serio_open(serio, drv); |
| if (err) |
| goto fail2; |
| |
| err = input_register_device(spaceorb->dev); |
| if (err) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: serio_close(serio); |
| fail2: serio_set_drvdata(serio, NULL); |
| fail1: input_free_device(input_dev); |
| kfree(spaceorb); |
| return err; |
| } |
| |
| /* |
| * The serio driver structure. |
| */ |
| |
| static struct serio_device_id spaceorb_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_SPACEORB, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids); |
| |
| static struct serio_driver spaceorb_drv = { |
| .driver = { |
| .name = "spaceorb", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = spaceorb_serio_ids, |
| .interrupt = spaceorb_interrupt, |
| .connect = spaceorb_connect, |
| .disconnect = spaceorb_disconnect, |
| }; |
| |
| module_serio_driver(spaceorb_drv); |