| if ARCH_MMP |
| |
| menu "Marvell PXA168/910/MMP2 Implmentations" |
| |
| config MACH_ASPENITE |
| bool "Marvell's PXA168 Aspenite Development Board" |
| select CPU_PXA168 |
| help |
| Say 'Y' here if you want to support the Marvell PXA168-based |
| Aspenite Development Board. |
| |
| config MACH_ZYLONITE2 |
| bool "Marvell's PXA168 Zylonite2 Development Board" |
| select CPU_PXA168 |
| help |
| Say 'Y' here if you want to support the Marvell PXA168-based |
| Zylonite2 Development Board. |
| |
| config MACH_AVENGERS_LITE |
| bool "Marvell's PXA168 Avengers Lite Development Board" |
| select CPU_PXA168 |
| help |
| Say 'Y' here if you want to support the Marvell PXA168-based |
| Avengers Lite Development Board. |
| |
| config MACH_TAVOREVB |
| bool "Marvell's PXA910 TavorEVB Development Board" |
| select CPU_PXA910 |
| help |
| Say 'Y' here if you want to support the Marvell PXA910-based |
| TavorEVB Development Board. |
| |
| config MACH_TTC_DKB |
| bool "Marvell's PXA910 TavorEVB Development Board" |
| select CPU_PXA910 |
| help |
| Say 'Y' here if you want to support the Marvell PXA910-based |
| TTC_DKB Development Board. |
| |
| config MACH_BROWNSTONE |
| bool "Marvell's Brownstone Development Platform" |
| depends on !CPU_MOHAWK |
| select CPU_MMP2 |
| help |
| Say 'Y' here if you want to support the Marvell MMP2-based |
| Brown Development Platform. |
| MMP2-based board can't be co-existed with PXA168-based & |
| PXA910-based development board. Since MMP2 is compatible to |
| ARMv7 architecture. |
| |
| config MACH_FLINT |
| bool "Marvell's Flint Development Platform" |
| depends on !CPU_MOHAWK |
| select CPU_MMP2 |
| help |
| Say 'Y' here if you want to support the Marvell MMP2-based |
| Flint Development Platform. |
| MMP2-based board can't be co-existed with PXA168-based & |
| PXA910-based development board. Since MMP2 is compatible to |
| ARMv7 architecture. |
| |
| config MACH_MARVELL_JASPER |
| bool "Marvell's Jasper Development Platform" |
| depends on !CPU_MOHAWK |
| select CPU_MMP2 |
| help |
| Say 'Y' here if you want to support the Marvell MMP2-base |
| Jasper Development Platform. |
| MMP2-based board can't be co-existed with PXA168-based & |
| PXA910-based development board. Since MMP2 is compatible to |
| ARMv7 architecture. |
| |
| config MACH_TETON_BGA |
| bool "Marvell's PXA168 Teton BGA Development Board" |
| select CPU_PXA168 |
| help |
| Say 'Y' here if you want to support the Marvell PXA168-based |
| Teton BGA Development Board. |
| |
| config MACH_GPLUGD |
| bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" |
| select CPU_PXA168 |
| help |
| Say 'Y' here if you want to support the Marvell PXA168-based |
| GuruPlug Display (gplugD) Board |
| |
| config MACH_MMP_DT |
| bool "Support MMP (ARMv5) platforms from device tree" |
| select CPU_PXA168 |
| select CPU_PXA910 |
| select USE_OF |
| select PINCTRL |
| select PINCTRL_SINGLE |
| help |
| Include support for Marvell MMP2 based platforms using |
| the device tree. Needn't select any other machine while |
| MACH_MMP_DT is enabled. |
| |
| config MACH_MMP2_DT |
| bool "Support MMP2 (ARMv7) platforms from device tree" |
| depends on !CPU_MOHAWK |
| select CPU_MMP2 |
| select USE_OF |
| select PINCTRL |
| select PINCTRL_SINGLE |
| help |
| Include support for Marvell MMP2 based platforms using |
| the device tree. |
| |
| endmenu |
| |
| config CPU_PXA168 |
| bool |
| select COMMON_CLK |
| select CPU_MOHAWK |
| help |
| Select code specific to PXA168 |
| |
| config CPU_PXA910 |
| bool |
| select COMMON_CLK |
| select CPU_MOHAWK |
| help |
| Select code specific to PXA910 |
| |
| config CPU_MMP2 |
| bool |
| select COMMON_CLK |
| select CPU_PJ4 |
| help |
| Select code specific to MMP2. MMP2 is ARMv7 compatible. |
| |
| config USB_EHCI_MV_U2O |
| bool "EHCI support for PXA USB OTG controller" |
| depends on USB_EHCI_MV |
| help |
| Enables support for OTG controller which can be switched to host mode. |
| |
| endif |
