| /* |
| * DaVinci MDIO Module driver |
| * |
| * Copyright (C) 2010 Texas Instruments. |
| * |
| * Shamelessly ripped out of davinci_emac.c, original copyrights follow: |
| * |
| * Copyright (C) 2009 Texas Instruments. |
| * |
| * --------------------------------------------------------------------------- |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * --------------------------------------------------------------------------- |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/phy.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/davinci_emac.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| /* |
| * This timeout definition is a worst-case ultra defensive measure against |
| * unexpected controller lock ups. Ideally, we should never ever hit this |
| * scenario in practice. |
| */ |
| #define MDIO_TIMEOUT 100 /* msecs */ |
| |
| #define PHY_REG_MASK 0x1f |
| #define PHY_ID_MASK 0x1f |
| |
| #define DEF_OUT_FREQ 2200000 /* 2.2 MHz */ |
| |
| struct davinci_mdio_regs { |
| u32 version; |
| u32 control; |
| #define CONTROL_IDLE BIT(31) |
| #define CONTROL_ENABLE BIT(30) |
| #define CONTROL_MAX_DIV (0xffff) |
| |
| u32 alive; |
| u32 link; |
| u32 linkintraw; |
| u32 linkintmasked; |
| u32 __reserved_0[2]; |
| u32 userintraw; |
| u32 userintmasked; |
| u32 userintmaskset; |
| u32 userintmaskclr; |
| u32 __reserved_1[20]; |
| |
| struct { |
| u32 access; |
| #define USERACCESS_GO BIT(31) |
| #define USERACCESS_WRITE BIT(30) |
| #define USERACCESS_ACK BIT(29) |
| #define USERACCESS_READ (0) |
| #define USERACCESS_DATA (0xffff) |
| |
| u32 physel; |
| } user[0]; |
| }; |
| |
| struct mdio_platform_data default_pdata = { |
| .bus_freq = DEF_OUT_FREQ, |
| }; |
| |
| struct davinci_mdio_data { |
| struct mdio_platform_data pdata; |
| struct davinci_mdio_regs __iomem *regs; |
| spinlock_t lock; |
| struct clk *clk; |
| struct device *dev; |
| struct mii_bus *bus; |
| bool suspended; |
| unsigned long access_time; /* jiffies */ |
| }; |
| |
| static void __davinci_mdio_reset(struct davinci_mdio_data *data) |
| { |
| u32 mdio_in, div, mdio_out_khz, access_time; |
| |
| mdio_in = clk_get_rate(data->clk); |
| div = (mdio_in / data->pdata.bus_freq) - 1; |
| if (div > CONTROL_MAX_DIV) |
| div = CONTROL_MAX_DIV; |
| |
| /* set enable and clock divider */ |
| __raw_writel(div | CONTROL_ENABLE, &data->regs->control); |
| |
| /* |
| * One mdio transaction consists of: |
| * 32 bits of preamble |
| * 32 bits of transferred data |
| * 24 bits of bus yield (not needed unless shared?) |
| */ |
| mdio_out_khz = mdio_in / (1000 * (div + 1)); |
| access_time = (88 * 1000) / mdio_out_khz; |
| |
| /* |
| * In the worst case, we could be kicking off a user-access immediately |
| * after the mdio bus scan state-machine triggered its own read. If |
| * so, our request could get deferred by one access cycle. We |
| * defensively allow for 4 access cycles. |
| */ |
| data->access_time = usecs_to_jiffies(access_time * 4); |
| if (!data->access_time) |
| data->access_time = 1; |
| } |
| |
| static int davinci_mdio_reset(struct mii_bus *bus) |
| { |
| struct davinci_mdio_data *data = bus->priv; |
| u32 phy_mask, ver; |
| |
| __davinci_mdio_reset(data); |
| |
| /* wait for scan logic to settle */ |
| msleep(PHY_MAX_ADDR * data->access_time); |
| |
| /* dump hardware version info */ |
| ver = __raw_readl(&data->regs->version); |
| dev_info(data->dev, "davinci mdio revision %d.%d\n", |
| (ver >> 8) & 0xff, ver & 0xff); |
| |
| /* get phy mask from the alive register */ |
| phy_mask = __raw_readl(&data->regs->alive); |
| if (phy_mask) { |
| /* restrict mdio bus to live phys only */ |
| dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); |
| phy_mask = ~phy_mask; |
| } else { |
| /* desperately scan all phys */ |
| dev_warn(data->dev, "no live phy, scanning all\n"); |
| phy_mask = 0; |
| } |
| data->bus->phy_mask = phy_mask; |
| |
| return 0; |
| } |
| |
| /* wait until hardware is ready for another user access */ |
| static inline int wait_for_user_access(struct davinci_mdio_data *data) |
| { |
| struct davinci_mdio_regs __iomem *regs = data->regs; |
| unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); |
| u32 reg; |
| |
| while (time_after(timeout, jiffies)) { |
| reg = __raw_readl(®s->user[0].access); |
| if ((reg & USERACCESS_GO) == 0) |
| return 0; |
| |
| reg = __raw_readl(®s->control); |
| if ((reg & CONTROL_IDLE) == 0) |
| continue; |
| |
| /* |
| * An emac soft_reset may have clobbered the mdio controller's |
| * state machine. We need to reset and retry the current |
| * operation |
| */ |
| dev_warn(data->dev, "resetting idled controller\n"); |
| __davinci_mdio_reset(data); |
| return -EAGAIN; |
| } |
| |
| reg = __raw_readl(®s->user[0].access); |
| if ((reg & USERACCESS_GO) == 0) |
| return 0; |
| |
| dev_err(data->dev, "timed out waiting for user access\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* wait until hardware state machine is idle */ |
| static inline int wait_for_idle(struct davinci_mdio_data *data) |
| { |
| struct davinci_mdio_regs __iomem *regs = data->regs; |
| unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); |
| |
| while (time_after(timeout, jiffies)) { |
| if (__raw_readl(®s->control) & CONTROL_IDLE) |
| return 0; |
| } |
| dev_err(data->dev, "timed out waiting for idle\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) |
| { |
| struct davinci_mdio_data *data = bus->priv; |
| u32 reg; |
| int ret; |
| |
| if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) |
| return -EINVAL; |
| |
| spin_lock(&data->lock); |
| |
| if (data->suspended) { |
| spin_unlock(&data->lock); |
| return -ENODEV; |
| } |
| |
| reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | |
| (phy_id << 16)); |
| |
| while (1) { |
| ret = wait_for_user_access(data); |
| if (ret == -EAGAIN) |
| continue; |
| if (ret < 0) |
| break; |
| |
| __raw_writel(reg, &data->regs->user[0].access); |
| |
| ret = wait_for_user_access(data); |
| if (ret == -EAGAIN) |
| continue; |
| if (ret < 0) |
| break; |
| |
| reg = __raw_readl(&data->regs->user[0].access); |
| ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO; |
| break; |
| } |
| |
| spin_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int davinci_mdio_write(struct mii_bus *bus, int phy_id, |
| int phy_reg, u16 phy_data) |
| { |
| struct davinci_mdio_data *data = bus->priv; |
| u32 reg; |
| int ret; |
| |
| if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) |
| return -EINVAL; |
| |
| spin_lock(&data->lock); |
| |
| if (data->suspended) { |
| spin_unlock(&data->lock); |
| return -ENODEV; |
| } |
| |
| reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | |
| (phy_id << 16) | (phy_data & USERACCESS_DATA)); |
| |
| while (1) { |
| ret = wait_for_user_access(data); |
| if (ret == -EAGAIN) |
| continue; |
| if (ret < 0) |
| break; |
| |
| __raw_writel(reg, &data->regs->user[0].access); |
| |
| ret = wait_for_user_access(data); |
| if (ret == -EAGAIN) |
| continue; |
| break; |
| } |
| |
| spin_unlock(&data->lock); |
| |
| return 0; |
| } |
| |
| static int davinci_mdio_probe_dt(struct mdio_platform_data *data, |
| struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| u32 prop; |
| |
| if (!node) |
| return -EINVAL; |
| |
| if (of_property_read_u32(node, "bus_freq", &prop)) { |
| pr_err("Missing bus_freq property in the DT.\n"); |
| return -EINVAL; |
| } |
| data->bus_freq = prop; |
| |
| return 0; |
| } |
| |
| |
| static int davinci_mdio_probe(struct platform_device *pdev) |
| { |
| struct mdio_platform_data *pdata = pdev->dev.platform_data; |
| struct device *dev = &pdev->dev; |
| struct davinci_mdio_data *data; |
| struct resource *res; |
| struct phy_device *phy; |
| int ret, addr; |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->bus = mdiobus_alloc(); |
| if (!data->bus) { |
| dev_err(dev, "failed to alloc mii bus\n"); |
| ret = -ENOMEM; |
| goto bail_out; |
| } |
| |
| if (dev->of_node) { |
| if (davinci_mdio_probe_dt(&data->pdata, pdev)) |
| data->pdata = default_pdata; |
| snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); |
| } else { |
| data->pdata = pdata ? (*pdata) : default_pdata; |
| snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x", |
| pdev->name, pdev->id); |
| } |
| |
| data->bus->name = dev_name(dev); |
| data->bus->read = davinci_mdio_read, |
| data->bus->write = davinci_mdio_write, |
| data->bus->reset = davinci_mdio_reset, |
| data->bus->parent = dev; |
| data->bus->priv = data; |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| data->clk = clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(data->clk)) { |
| dev_err(dev, "failed to get device clock\n"); |
| ret = PTR_ERR(data->clk); |
| data->clk = NULL; |
| goto bail_out; |
| } |
| |
| dev_set_drvdata(dev, data); |
| data->dev = dev; |
| spin_lock_init(&data->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "could not find register map resource\n"); |
| ret = -ENOENT; |
| goto bail_out; |
| } |
| |
| res = devm_request_mem_region(dev, res->start, resource_size(res), |
| dev_name(dev)); |
| if (!res) { |
| dev_err(dev, "could not allocate register map resource\n"); |
| ret = -ENXIO; |
| goto bail_out; |
| } |
| |
| data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); |
| if (!data->regs) { |
| dev_err(dev, "could not map mdio registers\n"); |
| ret = -ENOMEM; |
| goto bail_out; |
| } |
| |
| /* register the mii bus */ |
| ret = mdiobus_register(data->bus); |
| if (ret) |
| goto bail_out; |
| |
| /* scan and dump the bus */ |
| for (addr = 0; addr < PHY_MAX_ADDR; addr++) { |
| phy = data->bus->phy_map[addr]; |
| if (phy) { |
| dev_info(dev, "phy[%d]: device %s, driver %s\n", |
| phy->addr, dev_name(&phy->dev), |
| phy->drv ? phy->drv->name : "unknown"); |
| } |
| } |
| |
| return 0; |
| |
| bail_out: |
| if (data->bus) |
| mdiobus_free(data->bus); |
| |
| if (data->clk) |
| clk_put(data->clk); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| kfree(data); |
| |
| return ret; |
| } |
| |
| static int davinci_mdio_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| |
| if (data->bus) { |
| mdiobus_unregister(data->bus); |
| mdiobus_free(data->bus); |
| } |
| |
| if (data->clk) |
| clk_put(data->clk); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| dev_set_drvdata(dev, NULL); |
| |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static int davinci_mdio_suspend(struct device *dev) |
| { |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| u32 ctrl; |
| |
| spin_lock(&data->lock); |
| |
| /* shutdown the scan state machine */ |
| ctrl = __raw_readl(&data->regs->control); |
| ctrl &= ~CONTROL_ENABLE; |
| __raw_writel(ctrl, &data->regs->control); |
| wait_for_idle(data); |
| |
| data->suspended = true; |
| spin_unlock(&data->lock); |
| pm_runtime_put_sync(data->dev); |
| |
| return 0; |
| } |
| |
| static int davinci_mdio_resume(struct device *dev) |
| { |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| |
| pm_runtime_get_sync(data->dev); |
| |
| spin_lock(&data->lock); |
| /* restart the scan state machine */ |
| __davinci_mdio_reset(data); |
| |
| data->suspended = false; |
| spin_unlock(&data->lock); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops davinci_mdio_pm_ops = { |
| .suspend_late = davinci_mdio_suspend, |
| .resume_early = davinci_mdio_resume, |
| }; |
| |
| static const struct of_device_id davinci_mdio_of_mtable[] = { |
| { .compatible = "ti,davinci_mdio", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable); |
| |
| static struct platform_driver davinci_mdio_driver = { |
| .driver = { |
| .name = "davinci_mdio", |
| .owner = THIS_MODULE, |
| .pm = &davinci_mdio_pm_ops, |
| .of_match_table = of_match_ptr(davinci_mdio_of_mtable), |
| }, |
| .probe = davinci_mdio_probe, |
| .remove = davinci_mdio_remove, |
| }; |
| |
| static int __init davinci_mdio_init(void) |
| { |
| return platform_driver_register(&davinci_mdio_driver); |
| } |
| device_initcall(davinci_mdio_init); |
| |
| static void __exit davinci_mdio_exit(void) |
| { |
| platform_driver_unregister(&davinci_mdio_driver); |
| } |
| module_exit(davinci_mdio_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("DaVinci MDIO driver"); |