blob: fbca1ced49faac60bfffdef6ff6e19474475ff7b [file] [log] [blame]
/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/reboot.h>
#include <linux/signal.h>
#include <linux/power_supply.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-sysctrl.h>
/* RtcCtrl bits */
#define AB8500_ALARM_MIN_LOW 0x08
#define AB8500_ALARM_MIN_MID 0x09
#define RTC_CTRL 0x0B
#define RTC_ALARM_ENABLE 0x4
static struct device *sysctrl_dev;
void ab8500_power_off(void)
{
sigset_t old;
sigset_t all;
static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
int i;
bool charger_present = false;
union power_supply_propval val;
struct power_supply *psy;
int ret;
if (sysctrl_dev == NULL) {
pr_err("%s: sysctrl not initialized\n", __func__);
return;
}
/*
* If we have a charger connected and we're powering off,
* reboot into charge-only mode.
*/
for (i = 0; i < ARRAY_SIZE(pss); i++) {
psy = power_supply_get_by_name(pss[i]);
if (!psy)
continue;
ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
if (!ret && val.intval) {
charger_present = true;
break;
}
}
if (!charger_present)
goto shutdown;
/* Check if battery is known */
psy = power_supply_get_by_name("ab8500_btemp");
if (psy) {
ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY,
&val);
if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
printk(KERN_INFO
"Charger \"%s\" is connected with known battery."
" Rebooting.\n",
pss[i]);
machine_restart("charging");
}
}
shutdown:
sigfillset(&all);
if (!sigprocmask(SIG_BLOCK, &all, &old)) {
(void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
AB8500_STW4500CTRL1_SWOFF |
AB8500_STW4500CTRL1_SWRESET4500N);
(void)sigprocmask(SIG_SETMASK, &old, NULL);
}
}
/*
* Use the AB WD to reset the platform. It will perform a hard
* reset instead of a soft reset. Write the reset reason to
* the AB before reset, which can be read upon restart.
*/
void ab8500_restart(char mode, const char *cmd)
{
struct ab8500_platform_data *plat;
struct ab8500_sysctrl_platform_data *pdata;
u16 reason = 0;
u8 val;
if (sysctrl_dev == NULL) {
pr_err("%s: sysctrl not initialized\n", __func__);
return;
}
plat = dev_get_platdata(sysctrl_dev->parent);
pdata = plat->sysctrl;
if (pdata->reboot_reason_code)
reason = pdata->reboot_reason_code(cmd);
else
pr_warn("[%s] No reboot reason set. Default reason %d\n",
__func__, reason);
/*
* Disable RTC alarm, just a precaution so that no alarm
* is running when WD reset is executed.
*/
abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
RTC_CTRL , &val);
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
/*
* Android is not using the RTC alarm registers during reboot
* so we borrow them for writing the reason of reset
*/
/* reason[8 LSB] */
val = reason & 0xFF;
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
AB8500_ALARM_MIN_LOW , val);
/* reason[8 MSB] */
val = (reason>>8) & 0xFF;
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
AB8500_ALARM_MIN_MID , val);
/* Setting WD timeout to 0 */
ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
/* Setting the parameters to AB8500 WD*/
ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
}
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
(bank == AB8500_SYS_CTRL2_BLOCK));
}
int ab8500_sysctrl_read(u16 reg, u8 *value)
{
u8 bank;
if (sysctrl_dev == NULL)
return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
return -EINVAL;
return abx500_get_register_interruptible(sysctrl_dev, bank,
(u8)(reg & 0xFF), value);
}
EXPORT_SYMBOL(ab8500_sysctrl_read);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
{
u8 bank;
if (sysctrl_dev == NULL)
return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
return -EINVAL;
return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
(u8)(reg & 0xFF), mask, value);
}
EXPORT_SYMBOL(ab8500_sysctrl_write);
static int ab8500_sysctrl_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_platform_data *plat;
struct ab8500_sysctrl_platform_data *pdata;
plat = dev_get_platdata(pdev->dev.parent);
if (!(plat && plat->sysctrl))
return -EINVAL;
if (plat->pm_power_off)
pm_power_off = ab8500_power_off;
pdata = plat->sysctrl;
if (pdata) {
int last, ret, i, j;
if (is_ab8505(ab8500))
last = AB8500_SYSCLKREQ4RFCLKBUF;
else
last = AB8500_SYSCLKREQ8RFCLKBUF;
for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
j = i - AB8500_SYSCLKREQ1RFCLKBUF;
ret = ab8500_sysctrl_write(i, 0xff,
pdata->initial_req_buf_config[j]);
dev_dbg(&pdev->dev,
"Setting SysClkReq%dRfClkBuf 0x%X\n",
j + 1,
pdata->initial_req_buf_config[j]);
if (ret < 0) {
dev_err(&pdev->dev,
"unable to set sysClkReq%dRfClkBuf: "
"%d\n", j + 1, ret);
}
}
}
return 0;
}
static int ab8500_sysctrl_remove(struct platform_device *pdev)
{
sysctrl_dev = NULL;
return 0;
}
static struct platform_driver ab8500_sysctrl_driver = {
.driver = {
.name = "ab8500-sysctrl",
.owner = THIS_MODULE,
},
.probe = ab8500_sysctrl_probe,
.remove = ab8500_sysctrl_remove,
};
static int __init ab8500_sysctrl_init(void)
{
return platform_driver_register(&ab8500_sysctrl_driver);
}
arch_initcall(ab8500_sysctrl_init);
MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com");
MODULE_DESCRIPTION("AB8500 system control driver");
MODULE_LICENSE("GPL v2");