| /* |
| * Copyright (c) 2008-2009 Nuvoton technology corporation. |
| * |
| * Wan ZongShun <mcuos.com@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation;version 2 of the License. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #include <mach/w90p910_keypad.h> |
| |
| /* Keypad Interface Control Registers */ |
| #define KPI_CONF 0x00 |
| #define KPI_3KCONF 0x04 |
| #define KPI_LPCONF 0x08 |
| #define KPI_STATUS 0x0C |
| |
| #define IS1KEY (0x01 << 16) |
| #define INTTR (0x01 << 21) |
| #define KEY0R (0x0f << 3) |
| #define KEY0C 0x07 |
| #define DEBOUNCE_BIT 0x08 |
| #define KSIZE0 (0x01 << 16) |
| #define KSIZE1 (0x01 << 17) |
| #define KPSEL (0x01 << 19) |
| #define ENKP (0x01 << 18) |
| |
| #define KGET_RAW(n) (((n) & KEY0R) >> 3) |
| #define KGET_COLUMN(n) ((n) & KEY0C) |
| |
| #define W90P910_MAX_KEY_NUM (8 * 8) |
| #define W90P910_ROW_SHIFT 3 |
| |
| struct w90p910_keypad { |
| const struct w90p910_keypad_platform_data *pdata; |
| struct clk *clk; |
| struct input_dev *input_dev; |
| void __iomem *mmio_base; |
| int irq; |
| unsigned short keymap[W90P910_MAX_KEY_NUM]; |
| }; |
| |
| static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad, |
| unsigned int status) |
| { |
| struct input_dev *input_dev = keypad->input_dev; |
| unsigned int row = KGET_RAW(status); |
| unsigned int col = KGET_COLUMN(status); |
| unsigned int code = MATRIX_SCAN_CODE(row, col, W90P910_ROW_SHIFT); |
| unsigned int key = keypad->keymap[code]; |
| |
| input_event(input_dev, EV_MSC, MSC_SCAN, code); |
| input_report_key(input_dev, key, 1); |
| input_sync(input_dev); |
| |
| input_event(input_dev, EV_MSC, MSC_SCAN, code); |
| input_report_key(input_dev, key, 0); |
| input_sync(input_dev); |
| } |
| |
| static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id) |
| { |
| struct w90p910_keypad *keypad = dev_id; |
| unsigned int kstatus, val; |
| |
| kstatus = __raw_readl(keypad->mmio_base + KPI_STATUS); |
| |
| val = INTTR | IS1KEY; |
| |
| if (kstatus & val) |
| w90p910_keypad_scan_matrix(keypad, kstatus); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int w90p910_keypad_open(struct input_dev *dev) |
| { |
| struct w90p910_keypad *keypad = input_get_drvdata(dev); |
| const struct w90p910_keypad_platform_data *pdata = keypad->pdata; |
| unsigned int val, config; |
| |
| /* Enable unit clock */ |
| clk_enable(keypad->clk); |
| |
| val = __raw_readl(keypad->mmio_base + KPI_CONF); |
| val |= (KPSEL | ENKP); |
| val &= ~(KSIZE0 | KSIZE1); |
| |
| config = pdata->prescale | (pdata->debounce << DEBOUNCE_BIT); |
| |
| val |= config; |
| |
| __raw_writel(val, keypad->mmio_base + KPI_CONF); |
| |
| return 0; |
| } |
| |
| static void w90p910_keypad_close(struct input_dev *dev) |
| { |
| struct w90p910_keypad *keypad = input_get_drvdata(dev); |
| |
| /* Disable clock unit */ |
| clk_disable(keypad->clk); |
| } |
| |
| static int __devinit w90p910_keypad_probe(struct platform_device *pdev) |
| { |
| const struct w90p910_keypad_platform_data *pdata = |
| pdev->dev.platform_data; |
| const struct matrix_keymap_data *keymap_data; |
| struct w90p910_keypad *keypad; |
| struct input_dev *input_dev; |
| struct resource *res; |
| int irq; |
| int error; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data defined\n"); |
| return -EINVAL; |
| } |
| |
| keymap_data = pdata->keymap_data; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "failed to get keypad irq\n"); |
| return -ENXIO; |
| } |
| |
| keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!keypad || !input_dev) { |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); |
| error = -ENOMEM; |
| goto failed_free; |
| } |
| |
| keypad->pdata = pdata; |
| keypad->input_dev = input_dev; |
| keypad->irq = irq; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "failed to get I/O memory\n"); |
| error = -ENXIO; |
| goto failed_free; |
| } |
| |
| res = request_mem_region(res->start, resource_size(res), pdev->name); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "failed to request I/O memory\n"); |
| error = -EBUSY; |
| goto failed_free; |
| } |
| |
| keypad->mmio_base = ioremap(res->start, resource_size(res)); |
| if (keypad->mmio_base == NULL) { |
| dev_err(&pdev->dev, "failed to remap I/O memory\n"); |
| error = -ENXIO; |
| goto failed_free_res; |
| } |
| |
| keypad->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(keypad->clk)) { |
| dev_err(&pdev->dev, "failed to get keypad clock\n"); |
| error = PTR_ERR(keypad->clk); |
| goto failed_free_io; |
| } |
| |
| /* set multi-function pin for w90p910 kpi. */ |
| mfp_set_groupi(&pdev->dev); |
| |
| input_dev->name = pdev->name; |
| input_dev->id.bustype = BUS_HOST; |
| input_dev->open = w90p910_keypad_open; |
| input_dev->close = w90p910_keypad_close; |
| input_dev->dev.parent = &pdev->dev; |
| |
| input_dev->keycode = keypad->keymap; |
| input_dev->keycodesize = sizeof(keypad->keymap[0]); |
| input_dev->keycodemax = ARRAY_SIZE(keypad->keymap); |
| |
| input_set_drvdata(input_dev, keypad); |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| |
| matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT, |
| input_dev->keycode, input_dev->keybit); |
| |
| error = request_irq(keypad->irq, w90p910_keypad_irq_handler, |
| IRQF_DISABLED, pdev->name, keypad); |
| if (error) { |
| dev_err(&pdev->dev, "failed to request IRQ\n"); |
| goto failed_put_clk; |
| } |
| |
| /* Register the input device */ |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(&pdev->dev, "failed to register input device\n"); |
| goto failed_free_irq; |
| } |
| |
| platform_set_drvdata(pdev, keypad); |
| return 0; |
| |
| failed_free_irq: |
| free_irq(irq, pdev); |
| failed_put_clk: |
| clk_put(keypad->clk); |
| failed_free_io: |
| iounmap(keypad->mmio_base); |
| failed_free_res: |
| release_mem_region(res->start, resource_size(res)); |
| failed_free: |
| input_free_device(input_dev); |
| kfree(keypad); |
| return error; |
| } |
| |
| static int __devexit w90p910_keypad_remove(struct platform_device *pdev) |
| { |
| struct w90p910_keypad *keypad = platform_get_drvdata(pdev); |
| struct resource *res; |
| |
| free_irq(keypad->irq, pdev); |
| |
| clk_put(keypad->clk); |
| |
| input_unregister_device(keypad->input_dev); |
| |
| iounmap(keypad->mmio_base); |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(res->start, resource_size(res)); |
| |
| platform_set_drvdata(pdev, NULL); |
| kfree(keypad); |
| |
| return 0; |
| } |
| |
| static struct platform_driver w90p910_keypad_driver = { |
| .probe = w90p910_keypad_probe, |
| .remove = __devexit_p(w90p910_keypad_remove), |
| .driver = { |
| .name = "nuc900-kpi", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init w90p910_keypad_init(void) |
| { |
| return platform_driver_register(&w90p910_keypad_driver); |
| } |
| |
| static void __exit w90p910_keypad_exit(void) |
| { |
| platform_driver_unregister(&w90p910_keypad_driver); |
| } |
| |
| module_init(w90p910_keypad_init); |
| module_exit(w90p910_keypad_exit); |
| |
| MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); |
| MODULE_DESCRIPTION("w90p910 keypad driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:nuc900-keypad"); |