blob: 1ba3e5dbee106b40049e2505b77e0b182cddcec4 [file] [log] [blame]
/*
* E3C EC168 DVB USB driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include "ec168.h"
#include "ec100.h"
#include "mxl5005s.h"
/* debug */
static int dvb_usb_ec168_debug;
module_param_named(debug, dvb_usb_ec168_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct ec100_config ec168_ec100_config;
static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
{
int ret;
unsigned int pipe;
u8 request, requesttype;
u8 *buf;
switch (req->cmd) {
case DOWNLOAD_FIRMWARE:
case GPIO:
case WRITE_I2C:
case STREAMING_CTRL:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = req->cmd;
break;
case READ_I2C:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = req->cmd;
break;
case GET_CONFIG:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = CONFIG;
break;
case SET_CONFIG:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = CONFIG;
break;
case WRITE_DEMOD:
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
request = DEMOD_RW;
break;
case READ_DEMOD:
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
request = DEMOD_RW;
break;
default:
err("unknown command:%02x", req->cmd);
ret = -EPERM;
goto error;
}
buf = kmalloc(req->size, GFP_KERNEL);
if (!buf) {
ret = -ENOMEM;
goto error;
}
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
/* write */
memcpy(buf, req->data, req->size);
pipe = usb_sndctrlpipe(udev, 0);
} else {
/* read */
pipe = usb_rcvctrlpipe(udev, 0);
}
msleep(1); /* avoid I2C errors */
ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
req->index, buf, req->size, EC168_USB_TIMEOUT);
ec168_debug_dump(request, requesttype, req->value, req->index, buf,
req->size, deb_xfer);
if (ret < 0)
goto err_dealloc;
else
ret = 0;
/* read request, copy returned data to return buf */
if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
memcpy(req->data, buf, req->size);
kfree(buf);
return ret;
err_dealloc:
kfree(buf);
error:
deb_info("%s: failed:%d\n", __func__, ret);
return ret;
}
static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
{
return ec168_rw_udev(d->udev, req);
}
/* I2C */
static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct ec168_req req;
int i = 0;
int ret;
if (num > 2)
return -EINVAL;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].addr == ec168_ec100_config.demod_address) {
req.cmd = READ_DEMOD;
req.value = 0;
req.index = 0xff00 + msg[i].buf[0]; /* reg */
req.size = msg[i+1].len; /* bytes to read */
req.data = &msg[i+1].buf[0];
ret = ec168_ctrl_msg(d, &req);
i += 2;
} else {
err("I2C read not implemented");
ret = -ENOSYS;
i += 2;
}
} else {
if (msg[i].addr == ec168_ec100_config.demod_address) {
req.cmd = WRITE_DEMOD;
req.value = msg[i].buf[1]; /* val */
req.index = 0xff00 + msg[i].buf[0]; /* reg */
req.size = 0;
req.data = NULL;
ret = ec168_ctrl_msg(d, &req);
i += 1;
} else {
req.cmd = WRITE_I2C;
req.value = msg[i].buf[0]; /* val */
req.index = 0x0100 + msg[i].addr; /* I2C addr */
req.size = msg[i].len-1;
req.data = &msg[i].buf[1];
ret = ec168_ctrl_msg(d, &req);
i += 1;
}
}
if (ret)
goto error;
}
ret = i;
error:
mutex_unlock(&d->i2c_mutex);
return i;
}
static u32 ec168_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm ec168_i2c_algo = {
.master_xfer = ec168_i2c_xfer,
.functionality = ec168_i2c_func,
};
/* Callbacks for DVB USB */
static struct ec100_config ec168_ec100_config = {
.demod_address = 0xff, /* not real address, demod is integrated */
};
static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
{
deb_info("%s:\n", __func__);
adap->fe = dvb_attach(ec100_attach, &ec168_ec100_config,
&adap->dev->i2c_adap);
if (adap->fe == NULL)
return -ENODEV;
return 0;
}
static struct mxl5005s_config ec168_mxl5003s_config = {
.i2c_address = 0xc6,
.if_freq = IF_FREQ_4570000HZ,
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_OFF,
.rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
.AgcMasterByte = 0x00,
};
static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
{
deb_info("%s:\n", __func__);
return dvb_attach(mxl5005s_attach, adap->fe, &adap->dev->i2c_adap,
&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
}
static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
deb_info("%s: onoff:%d\n", __func__, onoff);
if (onoff)
req.index = 0x0102;
return ec168_ctrl_msg(adap->dev, &req);
}
static int ec168_download_firmware(struct usb_device *udev,
const struct firmware *fw)
{
int i, len, packets, remainder, ret;
u16 addr = 0x0000; /* firmware start address */
struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
deb_info("%s:\n", __func__);
#define FW_PACKET_MAX_DATA 2048
packets = fw->size / FW_PACKET_MAX_DATA;
remainder = fw->size % FW_PACKET_MAX_DATA;
len = FW_PACKET_MAX_DATA;
for (i = 0; i <= packets; i++) {
if (i == packets) /* set size of the last packet */
len = remainder;
req.size = len;
req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
req.index = addr;
addr += FW_PACKET_MAX_DATA;
ret = ec168_rw_udev(udev, &req);
if (ret) {
err("firmware download failed:%d packet:%d", ret, i);
goto error;
}
}
req.size = 0;
/* set "warm"? */
req.cmd = SET_CONFIG;
req.value = 0;
req.index = 0x0001;
ret = ec168_rw_udev(udev, &req);
if (ret)
goto error;
/* really needed - no idea what does */
req.cmd = GPIO;
req.value = 0;
req.index = 0x0206;
ret = ec168_rw_udev(udev, &req);
if (ret)
goto error;
/* activate tuner I2C? */
req.cmd = WRITE_I2C;
req.value = 0;
req.index = 0x00c6;
ret = ec168_rw_udev(udev, &req);
if (ret)
goto error;
return ret;
error:
deb_info("%s: failed:%d\n", __func__, ret);
return ret;
}
static int ec168_identify_state(struct usb_device *udev,
struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold)
{
int ret;
u8 reply;
struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
deb_info("%s:\n", __func__);
ret = ec168_rw_udev(udev, &req);
if (ret)
goto error;
deb_info("%s: reply:%02x\n", __func__, reply);
if (reply == 0x01)
*cold = 0;
else
*cold = 1;
return ret;
error:
deb_info("%s: failed:%d\n", __func__, ret);
return ret;
}
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties ec168_properties;
static int ec168_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret;
deb_info("%s: interface:%d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
adapter_nr);
if (ret)
goto error;
return ret;
error:
deb_info("%s: failed:%d\n", __func__, ret);
return ret;
}
#define E3C_EC168_1689 0
#define E3C_EC168_FFFA 1
#define E3C_EC168_FFFB 2
#define E3C_EC168_1001 3
#define E3C_EC168_1002 4
static struct usb_device_id ec168_id[] = {
[E3C_EC168_1689] =
{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
[E3C_EC168_FFFA] =
{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
[E3C_EC168_FFFB] =
{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
[E3C_EC168_1001] =
{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
[E3C_EC168_1002] =
{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, ec168_id);
static struct dvb_usb_device_properties ec168_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = ec168_download_firmware,
.firmware = "dvb-usb-ec168.fw",
.no_reconnect = 1,
.size_of_priv = 0,
.num_adapters = 1,
.adapter = {
{
.streaming_ctrl = ec168_streaming_ctrl,
.frontend_attach = ec168_ec100_frontend_attach,
.tuner_attach = ec168_mxl5003s_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 6,
.endpoint = 0x82,
.u = {
.bulk = {
.buffersize = (32*512),
}
}
},
}
},
.identify_state = ec168_identify_state,
.i2c_algo = &ec168_i2c_algo,
.num_device_descs = 1,
.devices = {
{
.name = "E3C EC168 DVB-T USB2.0 reference design",
.cold_ids = {
&ec168_id[E3C_EC168_1689],
&ec168_id[E3C_EC168_FFFA],
&ec168_id[E3C_EC168_FFFB],
&ec168_id[E3C_EC168_1001],
&ec168_id[E3C_EC168_1002],
NULL},
.warm_ids = {NULL},
},
}
};
static struct usb_driver ec168_driver = {
.name = "dvb_usb_ec168",
.probe = ec168_probe,
.disconnect = dvb_usb_device_exit,
.id_table = ec168_id,
};
/* module stuff */
static int __init ec168_module_init(void)
{
int ret;
deb_info("%s:\n", __func__);
ret = usb_register(&ec168_driver);
if (ret)
err("module init failed:%d", ret);
return ret;
}
static void __exit ec168_module_exit(void)
{
deb_info("%s:\n", __func__);
/* deregister this driver from the USB subsystem */
usb_deregister(&ec168_driver);
}
module_init(ec168_module_init);
module_exit(ec168_module_exit);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("E3C EC168 DVB-T USB2.0 driver");
MODULE_LICENSE("GPL");