blob: 1435fc31c4b29e55e2209050f0f51eab21fbb390 [file] [log] [blame]
# arch/arm/mach-exynos4/Kconfig
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
# Configuration options for the EXYNOS4
if ARCH_EXYNOS4
config CPU_EXYNOS4210
bool
select S3C_PL330_DMA
help
Enable EXYNOS4210 CPU support
config EXYNOS4_MCT
bool "Kernel timer support by MCT"
help
Use MCT (Multi Core Timer) as kernel timers
config EXYNOS4_DEV_AHCI
bool
help
Compile in platform device definitions for AHCI
config EXYNOS4_DEV_PD
bool
help
Compile in platform device definitions for Power Domain
config EXYNOS4_DEV_SYSMMU
bool
help
Common setup code for SYSTEM MMU in EXYNOS4
config EXYNOS4_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config EXYNOS4_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
config EXYNOS4_SETUP_I2C3
bool
help
Common setup code for i2c bus 3.
config EXYNOS4_SETUP_I2C4
bool
help
Common setup code for i2c bus 4.
config EXYNOS4_SETUP_I2C5
bool
help
Common setup code for i2c bus 5.
config EXYNOS4_SETUP_I2C6
bool
help
Common setup code for i2c bus 6.
config EXYNOS4_SETUP_I2C7
bool
help
Common setup code for i2c bus 7.
config EXYNOS4_SETUP_KEYPAD
bool
help
Common setup code for keypad.
config EXYNOS4_SETUP_SDHCI
bool
select EXYNOS4_SETUP_SDHCI_GPIO
help
Internal helper functions for EXYNOS4 based SDHCI systems.
config EXYNOS4_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
config EXYNOS4_SETUP_FIMC
bool
help
Common setup code for the camera interfaces.
config EXYNOS4_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
# machine support
menu "EXYNOS4 Machines"
config MACH_SMDKC210
bool "SMDKC210"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C5
select S5P_DEV_ONENAND
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S5P_DEV_USB_EHCI
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
endmenu
comment "Configuration for HSMMC bus width"
menu "Use 8-bit bus width"
config EXYNOS4_SDHCI_CH0_8BIT
bool "Channel 0 with 8-bit bus"
help
Support HSMMC Channel 0 8-bit bus.
If selected, Channel 1 is disabled.
config EXYNOS4_SDHCI_CH2_8BIT
bool "Channel 2 with 8-bit bus"
help
Support HSMMC Channel 2 8-bit bus.
If selected, Channel 3 is disabled.
endmenu
endif