arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c - maze/linux - Git at Google

 /*****************************************************************************
 * Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
 *
 * Unless you and Broadcom execute a separate written software license
 * agreement governing use of this software, this software is licensed to you
 * under the terms of the GNU General Public License version 2, available at
 * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
 *
 * Notwithstanding the above, under no circumstances may you combine this
 * software in any way with any other Broadcom software provided under a
 * license other than the GPL, without Broadcom's express prior written
 * consent.
 *****************************************************************************/

 /****************************************************************************/
 /**
 *  @file    chipcHw_init.c
 *
 *  @brief   Low level CHIPC PLL configuration functions
 *
 *  @note
 *
 *   These routines provide basic PLL controlling functionality only.
 */
 /****************************************************************************/

 /* ---- Include Files ---------------------------------------------------- */

 #include <csp/errno.h>
 #include <csp/stdint.h>
 #include <csp/module.h>

 #include <mach/csp/chipcHw_def.h>
 #include <mach/csp/chipcHw_inline.h>

 #include <csp/reg.h>
 #include <csp/delay.h>
 /* ---- Private Constants and Types --------------------------------------- */

 /*
     Calculation for NDIV_i to obtain VCO frequency
     -----------------------------------------------

 	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
 	for Freq_vco = VCO_FREQ_MHz
 		Freq_ref = chipcHw_XTAL_FREQ_Hz
 		PLL_P1 = PLL_P2 = 1
 		and
 		PLL_NDIV_f = 0

 	We get:
 		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz

     Calculation for PLL MDIV to obtain frequency Freq_x for channel x
     -----------------------------------------------------------------
 		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x

 		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
 */

 /* ---- Private Variables ------------------------------------------------- */
 /****************************************************************************/
 /**
 *  @brief  Initializes the PLL2
 *
 *  This function initializes the PLL2
 *
 */
 /****************************************************************************/
 void chipcHw_pll2Enable(uint32_t vcoFreqHz)
 {
 	uint32_t pllPreDivider2 = 0;

 	{
 		REG_LOCAL_IRQ_SAVE;
 		pChipcHw->PLLConfig2 =
 		    chipcHw_REG_PLL_CONFIG_D_RESET |
 		    chipcHw_REG_PLL_CONFIG_A_RESET;

 		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
 		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
 		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
 		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
 		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
 		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
 		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
 		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);

 		/* Enable CHIPC registers to control the PLL */
 		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;

 		/* Set pre divider to get desired VCO frequency */
 		pChipcHw->PLLPreDivider2 = pllPreDivider2;
 		/* Set NDIV Frac */
 		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;

 		/* This has to be removed once the default values are fixed for PLL2. */
 		pChipcHw->PLLControl12 = 0x38000700;
 		pChipcHw->PLLControl22 = 0x00000015;

 		/* Reset PLL2 */
 		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
 			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
 			    chipcHw_REG_PLL_CONFIG_A_RESET |
 			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
 			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
 		} else {
 			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
 			    chipcHw_REG_PLL_CONFIG_A_RESET |
 			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
 			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
 		}
 		REG_LOCAL_IRQ_RESTORE;
 	}

 	/* Insert certain amount of delay before deasserting ARESET. */
 	udelay(1);

 	{
 		REG_LOCAL_IRQ_SAVE;
 		/* Remove analog reset and Power on the PLL */
 		pChipcHw->PLLConfig2 &=
 		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
 		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);

 		REG_LOCAL_IRQ_RESTORE;

 	}

 	/* Wait until PLL is locked */
 	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
 		;

 	{
 		REG_LOCAL_IRQ_SAVE;
 		/* Remove digital reset */
 		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;

 		REG_LOCAL_IRQ_RESTORE;
 	}
 }

 EXPORT_SYMBOL(chipcHw_pll2Enable);

 /****************************************************************************/
 /**
 *  @brief  Initializes the PLL1
 *
 *  This function initializes the PLL1
 *
 */
 /****************************************************************************/
 void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
 {
 	uint32_t pllPreDivider = 0;

 	{
 		REG_LOCAL_IRQ_SAVE;

 		pChipcHw->PLLConfig =
 		    chipcHw_REG_PLL_CONFIG_D_RESET |
 		    chipcHw_REG_PLL_CONFIG_A_RESET;
 		/* Setting VCO frequency */
 		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
 			pllPreDivider =
 			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
 			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
 			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
 			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
 			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
 			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
 			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
 		} else {
 			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
 			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
 			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
 			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
 			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
 			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
 			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
 			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
 		}

 		/* Enable CHIPC registers to control the PLL */
 		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;

 		/* Set pre divider to get desired VCO frequency */
 		pChipcHw->PLLPreDivider = pllPreDivider;
 		/* Set NDIV Frac */
 		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
 			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
 			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
 		} else {
 			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
 			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
 		}

 		/* Reset PLL1 */
 		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
 			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
 			    chipcHw_REG_PLL_CONFIG_A_RESET |
 			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
 			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
 		} else {
 			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
 			    chipcHw_REG_PLL_CONFIG_A_RESET |
 			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
 			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
 		}

 		REG_LOCAL_IRQ_RESTORE;

 		/* Insert certain amount of delay before deasserting ARESET. */
 		udelay(1);

 		{
 			REG_LOCAL_IRQ_SAVE;
 			/* Remove analog reset and Power on the PLL */
 			pChipcHw->PLLConfig &=
 			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
 			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
 			REG_LOCAL_IRQ_RESTORE;
 		}

 		/* Wait until PLL is locked */
 		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
 		       || !(pChipcHw->
 			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
 			;

 		/* Remove digital reset */
 		{
 			REG_LOCAL_IRQ_SAVE;
 			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
 			REG_LOCAL_IRQ_RESTORE;
 		}
 	}
 }

 EXPORT_SYMBOL(chipcHw_pll1Enable);

 /****************************************************************************/
 /**
 *  @brief  Initializes the chipc module
 *
 *  This function initializes the PLLs and core system clocks
 *
 */
 /****************************************************************************/

 void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
     ) {
 #if !(defined(__KERNEL__) && !defined(STANDALONE))
 	delay_init();
 #endif

 	/* Do not program PLL, when warm reset */
 	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
 		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
 				   initParam->ssSupport);
 		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
 	} else {
 		/* Clear sticky bits */
 		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
 	}
 	/* Clear sticky bits */
 	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);

 	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
 	pChipcHw->ACLKClock =
 	    (pChipcHw->
 	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
 								 armBusRatio &
 								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);

 	/* Set various core component frequencies. The order in which this is done is important for some. */
 	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
 	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
 	/* then VPM and RTBUS. */

 	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
 				  initParam->busClockFreqHz *
 				  initParam->armBusRatio);
 	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
 	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
 				  initParam->busClockFreqHz *
 				  initParam->vpmBusRatio);
 	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
 				  initParam->busClockFreqHz *
 				  initParam->ddrBusRatio);
 	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
 				  initParam->busClockFreqHz / 2);
 }
	/*****************************************************************************
	* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
	*
	* Unless you and Broadcom execute a separate written software license
	* agreement governing use of this software, this software is licensed to you
	* under the terms of the GNU General Public License version 2, available at
	* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
	*
	* Notwithstanding the above, under no circumstances may you combine this
	* software in any way with any other Broadcom software provided under a
	* license other than the GPL, without Broadcom's express prior written
	* consent.
	*****************************************************************************/

	/****************************************************************************/
	/**
	* @file chipcHw_init.c
	*
	* @brief Low level CHIPC PLL configuration functions
	*
	* @note
	*
	* These routines provide basic PLL controlling functionality only.
	*/
	/****************************************************************************/

	/* ---- Include Files ---------------------------------------------------- */

	#include <csp/errno.h>
	#include <csp/stdint.h>
	#include <csp/module.h>

	#include <mach/csp/chipcHw_def.h>
	#include <mach/csp/chipcHw_inline.h>

	#include <csp/reg.h>
	#include <csp/delay.h>
	/* ---- Private Constants and Types --------------------------------------- */

	/*
	Calculation for NDIV_i to obtain VCO frequency
	-----------------------------------------------

	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
	for Freq_vco = VCO_FREQ_MHz
	Freq_ref = chipcHw_XTAL_FREQ_Hz
	PLL_P1 = PLL_P2 = 1
	and
	PLL_NDIV_f = 0

	We get:
	PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz

	Calculation for PLL MDIV to obtain frequency Freq_x for channel x
	-----------------------------------------------------------------
	Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x

	PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
	*/

	/* ---- Private Variables ------------------------------------------------- */
	/****************************************************************************/
	/**
	* @brief Initializes the PLL2
	*
	* This function initializes the PLL2
	*
	*/
	/****************************************************************************/
	void chipcHw_pll2Enable(uint32_t vcoFreqHz)
	{
	uint32_t pllPreDivider2 = 0;

	{
	REG_LOCAL_IRQ_SAVE;
	pChipcHw->PLLConfig2 =
	chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET;

	pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN \|
	chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER \|
	(chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
	chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P1 <<
	chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P2 <<
	chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);

	/* Enable CHIPC registers to control the PLL */
	pChipcHw->PLLStatus \|= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;

	/* Set pre divider to get desired VCO frequency */
	pChipcHw->PLLPreDivider2 = pllPreDivider2;
	/* Set NDIV Frac */
	pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;

	/* This has to be removed once the default values are fixed for PLL2. */
	pChipcHw->PLLControl12 = 0x38000700;
	pChipcHw->PLLControl22 = 0x00000015;

	/* Reset PLL2 */
	if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
	pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_VCO_1601_3200 \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN;
	} else {
	pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_VCO_800_1600 \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN;
	}
	REG_LOCAL_IRQ_RESTORE;
	}

	/* Insert certain amount of delay before deasserting ARESET. */
	udelay(1);

	{
	REG_LOCAL_IRQ_SAVE;
	/* Remove analog reset and Power on the PLL */
	pChipcHw->PLLConfig2 &=
	~(chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN);

	REG_LOCAL_IRQ_RESTORE;

	}

	/* Wait until PLL is locked */
	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
	;

	{
	REG_LOCAL_IRQ_SAVE;
	/* Remove digital reset */
	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;

	REG_LOCAL_IRQ_RESTORE;
	}
	}

	EXPORT_SYMBOL(chipcHw_pll2Enable);

	/****************************************************************************/
	/**
	* @brief Initializes the PLL1
	*
	* This function initializes the PLL1
	*
	*/
	/****************************************************************************/
	void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
	{
	uint32_t pllPreDivider = 0;

	{
	REG_LOCAL_IRQ_SAVE;

	pChipcHw->PLLConfig =
	chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET;
	/* Setting VCO frequency */
	if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
	pllPreDivider =
	chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 \|
	((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
	1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P1 <<
	chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P2 <<
	chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
	} else {
	pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN \|
	chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER \|
	(chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
	chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P1 <<
	chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) \|
	(chipcHw_REG_PLL_PREDIVIDER_P2 <<
	chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
	}

	/* Enable CHIPC registers to control the PLL */
	pChipcHw->PLLStatus \|= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;

	/* Set pre divider to get desired VCO frequency */
	pChipcHw->PLLPreDivider = pllPreDivider;
	/* Set NDIV Frac */
	if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
	pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV \|
	chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
	} else {
	pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV \|
	chipcHw_REG_PLL_DIVIDER_NDIV_f;
	}

	/* Reset PLL1 */
	if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
	pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_VCO_1601_3200 \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN;
	} else {
	pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET \|
	chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_VCO_800_1600 \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN;
	}

	REG_LOCAL_IRQ_RESTORE;

	/* Insert certain amount of delay before deasserting ARESET. */
	udelay(1);

	{
	REG_LOCAL_IRQ_SAVE;
	/* Remove analog reset and Power on the PLL */
	pChipcHw->PLLConfig &=
	~(chipcHw_REG_PLL_CONFIG_A_RESET \|
	chipcHw_REG_PLL_CONFIG_POWER_DOWN);
	REG_LOCAL_IRQ_RESTORE;
	}

	/* Wait until PLL is locked */
	while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
	\|\| !(pChipcHw->
	PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
	;

	/* Remove digital reset */
	{
	REG_LOCAL_IRQ_SAVE;
	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
	REG_LOCAL_IRQ_RESTORE;
	}
	}
	}

	EXPORT_SYMBOL(chipcHw_pll1Enable);

	/****************************************************************************/
	/**
	* @brief Initializes the chipc module
	*
	* This function initializes the PLLs and core system clocks
	*
	*/
	/****************************************************************************/

	void chipcHw_Init(chipcHw_INIT_PARAM_t initParam / [ IN ] Misc chip initialization parameter */
	) {
	#if !(defined(__KERNEL__) && !defined(STANDALONE))
	delay_init();
	#endif

	/* Do not program PLL, when warm reset */
	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
	chipcHw_pll1Enable(initParam->pllVcoFreqHz,
	initParam->ssSupport);
	chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
	} else {
	/* Clear sticky bits */
	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
	}
	/* Clear sticky bits */
	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);

	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
	pChipcHw->ACLKClock =
	(pChipcHw->
	ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) \| (initParam->
	armBusRatio &
	chipcHw_REG_ACLKClock_CLK_DIV_MASK);

	/* Set various core component frequencies. The order in which this is done is important for some. */
	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
	/* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */
	/* then VPM and RTBUS. */

	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
	initParam->busClockFreqHz *
	initParam->armBusRatio);
	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
	initParam->busClockFreqHz *
	initParam->vpmBusRatio);
	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
	initParam->busClockFreqHz *
	initParam->ddrBusRatio);
	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
	initParam->busClockFreqHz / 2);
	}