| /* |
| * Marvell 88SE94xx hardware specific head file |
| * |
| * Copyright 2007 Red Hat, Inc. |
| * Copyright 2008 Marvell. <kewei@marvell.com> |
| * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com> |
| * |
| * This file is licensed under GPLv2. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of the |
| * License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 |
| * USA |
| */ |
| |
| #ifndef _MVS94XX_REG_H_ |
| #define _MVS94XX_REG_H_ |
| |
| #include <linux/types.h> |
| |
| #define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS |
| |
| enum hw_registers { |
| MVS_GBL_CTL = 0x04, /* global control */ |
| MVS_GBL_INT_STAT = 0x00, /* global irq status */ |
| MVS_GBL_PI = 0x0C, /* ports implemented bitmask */ |
| |
| MVS_PHY_CTL = 0x40, /* SOC PHY Control */ |
| MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */ |
| |
| MVS_GBL_PORT_TYPE = 0xa0, /* port type */ |
| |
| MVS_CTL = 0x100, /* SAS/SATA port configuration */ |
| MVS_PCS = 0x104, /* SAS/SATA port control/status */ |
| MVS_CMD_LIST_LO = 0x108, /* cmd list addr */ |
| MVS_CMD_LIST_HI = 0x10C, |
| MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */ |
| MVS_RX_FIS_HI = 0x114, |
| MVS_STP_REG_SET_0 = 0x118, /* STP/SATA Register Set Enable */ |
| MVS_STP_REG_SET_1 = 0x11C, |
| MVS_TX_CFG = 0x120, /* TX configuration */ |
| MVS_TX_LO = 0x124, /* TX (delivery) ring addr */ |
| MVS_TX_HI = 0x128, |
| |
| MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */ |
| MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */ |
| MVS_RX_CFG = 0x134, /* RX configuration */ |
| MVS_RX_LO = 0x138, /* RX (completion) ring addr */ |
| MVS_RX_HI = 0x13C, |
| MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */ |
| |
| MVS_INT_COAL = 0x148, /* Int coalescing config */ |
| MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */ |
| MVS_INT_STAT = 0x150, /* Central int status */ |
| MVS_INT_MASK = 0x154, /* Central int enable */ |
| MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */ |
| MVS_INT_MASK_SRS_0 = 0x15C, |
| MVS_INT_STAT_SRS_1 = 0x160, |
| MVS_INT_MASK_SRS_1 = 0x164, |
| MVS_NON_NCQ_ERR_0 = 0x168, /* SRS Non-specific NCQ Error */ |
| MVS_NON_NCQ_ERR_1 = 0x16C, |
| MVS_CMD_ADDR = 0x170, /* Command register port (addr) */ |
| MVS_CMD_DATA = 0x174, /* Command register port (data) */ |
| MVS_MEM_PARITY_ERR = 0x178, /* Memory parity error */ |
| |
| /* ports 1-3 follow after this */ |
| MVS_P0_INT_STAT = 0x180, /* port0 interrupt status */ |
| MVS_P0_INT_MASK = 0x184, /* port0 interrupt mask */ |
| /* ports 5-7 follow after this */ |
| MVS_P4_INT_STAT = 0x1A0, /* Port4 interrupt status */ |
| MVS_P4_INT_MASK = 0x1A4, /* Port4 interrupt enable mask */ |
| |
| /* ports 1-3 follow after this */ |
| MVS_P0_SER_CTLSTAT = 0x1D0, /* port0 serial control/status */ |
| /* ports 5-7 follow after this */ |
| MVS_P4_SER_CTLSTAT = 0x1E0, /* port4 serial control/status */ |
| |
| /* ports 1-3 follow after this */ |
| MVS_P0_CFG_ADDR = 0x200, /* port0 phy register address */ |
| MVS_P0_CFG_DATA = 0x204, /* port0 phy register data */ |
| /* ports 5-7 follow after this */ |
| MVS_P4_CFG_ADDR = 0x220, /* Port4 config address */ |
| MVS_P4_CFG_DATA = 0x224, /* Port4 config data */ |
| |
| /* phys 1-3 follow after this */ |
| MVS_P0_VSR_ADDR = 0x250, /* phy0 VSR address */ |
| MVS_P0_VSR_DATA = 0x254, /* phy0 VSR data */ |
| /* phys 1-3 follow after this */ |
| /* multiplexing */ |
| MVS_P4_VSR_ADDR = 0x250, /* phy4 VSR address */ |
| MVS_P4_VSR_DATA = 0x254, /* phy4 VSR data */ |
| MVS_PA_VSR_ADDR = 0x290, /* All port VSR addr */ |
| MVS_PA_VSR_PORT = 0x294, /* All port VSR data */ |
| }; |
| |
| enum pci_cfg_registers { |
| PCR_PHY_CTL = 0x40, |
| PCR_PHY_CTL2 = 0x90, |
| PCR_DEV_CTRL = 0x78, |
| PCR_LINK_STAT = 0x82, |
| }; |
| |
| /* SAS/SATA Vendor Specific Port Registers */ |
| enum sas_sata_vsp_regs { |
| VSR_PHY_STAT = 0x00 * 4, /* Phy Status */ |
| VSR_PHY_MODE1 = 0x01 * 4, /* phy tx */ |
| VSR_PHY_MODE2 = 0x02 * 4, /* tx scc */ |
| VSR_PHY_MODE3 = 0x03 * 4, /* pll */ |
| VSR_PHY_MODE4 = 0x04 * 4, /* VCO */ |
| VSR_PHY_MODE5 = 0x05 * 4, /* Rx */ |
| VSR_PHY_MODE6 = 0x06 * 4, /* CDR */ |
| VSR_PHY_MODE7 = 0x07 * 4, /* Impedance */ |
| VSR_PHY_MODE8 = 0x08 * 4, /* Voltage */ |
| VSR_PHY_MODE9 = 0x09 * 4, /* Test */ |
| VSR_PHY_MODE10 = 0x0A * 4, /* Power */ |
| VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */ |
| VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */ |
| VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */ |
| }; |
| |
| enum chip_register_bits { |
| PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8), |
| PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8), |
| PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12), |
| PHY_NEG_SPP_PHYS_LINK_RATE_MASK = |
| (0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET), |
| }; |
| |
| enum pci_interrupt_cause { |
| /* MAIN_IRQ_CAUSE (R10200) Bits*/ |
| IRQ_COM_IN_I2O_IOP0 = (1 << 0), |
| IRQ_COM_IN_I2O_IOP1 = (1 << 1), |
| IRQ_COM_IN_I2O_IOP2 = (1 << 2), |
| IRQ_COM_IN_I2O_IOP3 = (1 << 3), |
| IRQ_COM_OUT_I2O_HOS0 = (1 << 4), |
| IRQ_COM_OUT_I2O_HOS1 = (1 << 5), |
| IRQ_COM_OUT_I2O_HOS2 = (1 << 6), |
| IRQ_COM_OUT_I2O_HOS3 = (1 << 7), |
| IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8), |
| IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9), |
| IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10), |
| IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11), |
| IRQ_PCIF_DRBL0 = (1 << 12), |
| IRQ_PCIF_DRBL1 = (1 << 13), |
| IRQ_PCIF_DRBL2 = (1 << 14), |
| IRQ_PCIF_DRBL3 = (1 << 15), |
| IRQ_XOR_A = (1 << 16), |
| IRQ_XOR_B = (1 << 17), |
| IRQ_SAS_A = (1 << 18), |
| IRQ_SAS_B = (1 << 19), |
| IRQ_CPU_CNTRL = (1 << 20), |
| IRQ_GPIO = (1 << 21), |
| IRQ_UART = (1 << 22), |
| IRQ_SPI = (1 << 23), |
| IRQ_I2C = (1 << 24), |
| IRQ_SGPIO = (1 << 25), |
| IRQ_COM_ERR = (1 << 29), |
| IRQ_I2O_ERR = (1 << 30), |
| IRQ_PCIE_ERR = (1 << 31), |
| }; |
| |
| #define MAX_SG_ENTRY 255 |
| |
| struct mvs_prd_imt { |
| __le32 len:22; |
| u8 _r_a:2; |
| u8 misc_ctl:4; |
| u8 inter_sel:4; |
| }; |
| |
| struct mvs_prd { |
| /* 64-bit buffer address */ |
| __le64 addr; |
| /* 22-bit length */ |
| struct mvs_prd_imt im_len; |
| } __attribute__ ((packed)); |
| |
| #define SPI_CTRL_REG_94XX 0xc800 |
| #define SPI_ADDR_REG_94XX 0xc804 |
| #define SPI_WR_DATA_REG_94XX 0xc808 |
| #define SPI_RD_DATA_REG_94XX 0xc80c |
| #define SPI_CTRL_READ_94XX (1U << 2) |
| #define SPI_ADDR_VLD_94XX (1U << 1) |
| #define SPI_CTRL_SpiStart_94XX (1U << 0) |
| |
| #define mv_ffc(x) ffz(x) |
| |
| static inline int |
| mv_ffc64(u64 v) |
| { |
| int i; |
| i = mv_ffc((u32)v); |
| if (i >= 0) |
| return i; |
| i = mv_ffc((u32)(v>>32)); |
| |
| if (i != 0) |
| return 32 + i; |
| |
| return -1; |
| } |
| |
| #define r_reg_set_enable(i) \ |
| (((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \ |
| mr32(MVS_STP_REG_SET_0)) |
| |
| #define w_reg_set_enable(i, tmp) \ |
| (((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \ |
| mw32(MVS_STP_REG_SET_0, tmp)) |
| |
| extern const struct mvs_dispatch mvs_94xx_dispatch; |
| #endif |
| |