arch/powerpc/sysdev/i8259.c - maze/linux - Git at Google

 /*
  * i8259 interrupt controller driver.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
 #undef DEBUG

 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <asm/io.h>
 #include <asm/i8259.h>
 #include <asm/prom.h>

 static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */

 static unsigned char cached_8259[2] = { 0xff, 0xff };
 #define cached_A1 (cached_8259[0])
 #define cached_21 (cached_8259[1])

 static DEFINE_RAW_SPINLOCK(i8259_lock);

 static struct irq_host *i8259_host;

 /*
  * Acknowledge the IRQ using either the PCI host bridge's interrupt
  * acknowledge feature or poll.  How i8259_init() is called determines
  * which is called.  It should be noted that polling is broken on some
  * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
  */
 unsigned int i8259_irq(void)
 {
 	int irq;
 	int lock = 0;

 	/* Either int-ack or poll for the IRQ */
 	if (pci_intack)
 		irq = readb(pci_intack);
 	else {
 		raw_spin_lock(&i8259_lock);
 		lock = 1;

 		/* Perform an interrupt acknowledge cycle on controller 1. */
 		outb(0x0C, 0x20);		/* prepare for poll */
 		irq = inb(0x20) & 7;
 		if (irq == 2 ) {
 			/*
 			 * Interrupt is cascaded so perform interrupt
 			 * acknowledge on controller 2.
 			 */
 			outb(0x0C, 0xA0);	/* prepare for poll */
 			irq = (inb(0xA0) & 7) + 8;
 		}
 	}

 	if (irq == 7) {
 		/*
 		 * This may be a spurious interrupt.
 		 *
 		 * Read the interrupt status register (ISR). If the most
 		 * significant bit is not set then there is no valid
 		 * interrupt.
 		 */
 		if (!pci_intack)
 			outb(0x0B, 0x20);	/* ISR register */
 		if(~inb(0x20) & 0x80)
 			irq = NO_IRQ;
 	} else if (irq == 0xff)
 		irq = NO_IRQ;

 	if (lock)
 		raw_spin_unlock(&i8259_lock);
 	return irq;
 }

 static void i8259_mask_and_ack_irq(struct irq_data *d)
 {
 	unsigned long flags;

 	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (d->irq > 7) {
 		cached_A1 |= 1 << (d->irq-8);
 		inb(0xA1); 	/* DUMMY */
 		outb(cached_A1, 0xA1);
 		outb(0x20, 0xA0);	/* Non-specific EOI */
 		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
 	} else {
 		cached_21 |= 1 << d->irq;
 		inb(0x21); 	/* DUMMY */
 		outb(cached_21, 0x21);
 		outb(0x20, 0x20);	/* Non-specific EOI */
 	}
 	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }

 static void i8259_set_irq_mask(int irq_nr)
 {
 	outb(cached_A1,0xA1);
 	outb(cached_21,0x21);
 }

 static void i8259_mask_irq(struct irq_data *d)
 {
 	unsigned long flags;

 	pr_debug("i8259_mask_irq(%d)\n", d->irq);

 	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (d->irq < 8)
 		cached_21 |= 1 << d->irq;
 	else
 		cached_A1 |= 1 << (d->irq-8);
 	i8259_set_irq_mask(d->irq);
 	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }

 static void i8259_unmask_irq(struct irq_data *d)
 {
 	unsigned long flags;

 	pr_debug("i8259_unmask_irq(%d)\n", d->irq);

 	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (d->irq < 8)
 		cached_21 &= ~(1 << d->irq);
 	else
 		cached_A1 &= ~(1 << (d->irq-8));
 	i8259_set_irq_mask(d->irq);
 	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }

 static struct irq_chip i8259_pic = {
 	.name		= "i8259",
 	.irq_mask	= i8259_mask_irq,
 	.irq_disable	= i8259_mask_irq,
 	.irq_unmask	= i8259_unmask_irq,
 	.irq_mask_ack	= i8259_mask_and_ack_irq,
 };

 static struct resource pic1_iores = {
 	.name = "8259 (master)",
 	.start = 0x20,
 	.end = 0x21,
 	.flags = IORESOURCE_BUSY,
 };

 static struct resource pic2_iores = {
 	.name = "8259 (slave)",
 	.start = 0xa0,
 	.end = 0xa1,
 	.flags = IORESOURCE_BUSY,
 };

 static struct resource pic_edgectrl_iores = {
 	.name = "8259 edge control",
 	.start = 0x4d0,
 	.end = 0x4d1,
 	.flags = IORESOURCE_BUSY,
 };

 static int i8259_host_match(struct irq_host *h, struct device_node *node)
 {
 	return h->of_node == NULL || h->of_node == node;
 }

 static int i8259_host_map(struct irq_host *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {
 	pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);

 	/* We block the internal cascade */
 	if (hw == 2)
 		irq_set_status_flags(virq, IRQ_NOREQUEST);

 	/* We use the level handler only for now, we might want to
 	 * be more cautious here but that works for now
 	 */
 	irq_set_status_flags(virq, IRQ_LEVEL);
 	irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq);
 	return 0;
 }

 static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
 {
 	/* Make sure irq is masked in hardware */
 	i8259_mask_irq(irq_get_irq_data(virq));

 	/* remove chip and handler */
 	irq_set_chip_and_handler(virq, NULL, NULL);

 	/* Make sure it's completed */
 	synchronize_irq(virq);
 }

 static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
 			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	static unsigned char map_isa_senses[4] = {
 		IRQ_TYPE_LEVEL_LOW,
 		IRQ_TYPE_LEVEL_HIGH,
 		IRQ_TYPE_EDGE_FALLING,
 		IRQ_TYPE_EDGE_RISING,
 	};

 	*out_hwirq = intspec[0];
 	if (intsize > 1 && intspec[1] < 4)
 		*out_flags = map_isa_senses[intspec[1]];
 	else
 		*out_flags = IRQ_TYPE_NONE;

 	return 0;
 }

 static struct irq_host_ops i8259_host_ops = {
 	.match = i8259_host_match,
 	.map = i8259_host_map,
 	.unmap = i8259_host_unmap,
 	.xlate = i8259_host_xlate,
 };

 struct irq_host *i8259_get_host(void)
 {
 	return i8259_host;
 }

 /**
  * i8259_init - Initialize the legacy controller
  * @node: device node of the legacy PIC (can be NULL, but then, it will match
  *        all interrupts, so beware)
  * @intack_addr: PCI interrupt acknowledge (real) address which will return
  *             	 the active irq from the 8259
  */
 void i8259_init(struct device_node *node, unsigned long intack_addr)
 {
 	unsigned long flags;

 	/* initialize the controller */
 	raw_spin_lock_irqsave(&i8259_lock, flags);

 	/* Mask all first */
 	outb(0xff, 0xA1);
 	outb(0xff, 0x21);

 	/* init master interrupt controller */
 	outb(0x11, 0x20); /* Start init sequence */
 	outb(0x00, 0x21); /* Vector base */
 	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
 	outb(0x01, 0x21); /* Select 8086 mode */

 	/* init slave interrupt controller */
 	outb(0x11, 0xA0); /* Start init sequence */
 	outb(0x08, 0xA1); /* Vector base */
 	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
 	outb(0x01, 0xA1); /* Select 8086 mode */

 	/* That thing is slow */
 	udelay(100);

 	/* always read ISR */
 	outb(0x0B, 0x20);
 	outb(0x0B, 0xA0);

 	/* Unmask the internal cascade */
 	cached_21 &= ~(1 << 2);

 	/* Set interrupt masks */
 	outb(cached_A1, 0xA1);
 	outb(cached_21, 0x21);

 	raw_spin_unlock_irqrestore(&i8259_lock, flags);

 	/* create a legacy host */
 	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				    0, &i8259_host_ops, 0);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
 		return;
 	}

 	/* reserve our resources */
 	/* XXX should we continue doing that ? it seems to cause problems
 	 * with further requesting of PCI IO resources for that range...
 	 * need to look into it.
 	 */
 	request_resource(&ioport_resource, &pic1_iores);
 	request_resource(&ioport_resource, &pic2_iores);
 	request_resource(&ioport_resource, &pic_edgectrl_iores);

 	if (intack_addr != 0)
 		pci_intack = ioremap(intack_addr, 1);

 	printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
 }
	/*
	* i8259 interrupt controller driver.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/
	#undef DEBUG

	#include <linux/init.h>
	#include <linux/ioport.h>
	#include <linux/interrupt.h>
	#include <linux/kernel.h>
	#include <linux/delay.h>
	#include <asm/io.h>
	#include <asm/i8259.h>
	#include <asm/prom.h>

	static volatile void __iomem pci_intack; / RO, gives us the irq vector */

	static unsigned char cached_8259[2] = { 0xff, 0xff };
	#define cached_A1 (cached_8259[0])
	#define cached_21 (cached_8259[1])

	static DEFINE_RAW_SPINLOCK(i8259_lock);

	static struct irq_host *i8259_host;

	/*
	* Acknowledge the IRQ using either the PCI host bridge's interrupt
	* acknowledge feature or poll. How i8259_init() is called determines
	* which is called. It should be noted that polling is broken on some
	* IBM and Motorola PReP boxes so we must use the int-ack feature on them.
	*/
	unsigned int i8259_irq(void)
	{
	int irq;
	int lock = 0;

	/* Either int-ack or poll for the IRQ */
	if (pci_intack)
	irq = readb(pci_intack);
	else {
	raw_spin_lock(&i8259_lock);
	lock = 1;

	/* Perform an interrupt acknowledge cycle on controller 1. */
	outb(0x0C, 0x20); /* prepare for poll */
	irq = inb(0x20) & 7;
	if (irq == 2 ) {
	/*
	* Interrupt is cascaded so perform interrupt
	* acknowledge on controller 2.
	*/
	outb(0x0C, 0xA0); /* prepare for poll */
	irq = (inb(0xA0) & 7) + 8;
	}
	}

	if (irq == 7) {
	/*
	* This may be a spurious interrupt.
	*
	* Read the interrupt status register (ISR). If the most
	* significant bit is not set then there is no valid
	* interrupt.
	*/
	if (!pci_intack)
	outb(0x0B, 0x20); /* ISR register */
	if(~inb(0x20) & 0x80)
	irq = NO_IRQ;
	} else if (irq == 0xff)
	irq = NO_IRQ;

	if (lock)
	raw_spin_unlock(&i8259_lock);
	return irq;
	}

	static void i8259_mask_and_ack_irq(struct irq_data *d)
	{
	unsigned long flags;

	raw_spin_lock_irqsave(&i8259_lock, flags);
	if (d->irq > 7) {
	cached_A1 \|= 1 << (d->irq-8);
	inb(0xA1); /* DUMMY */
	outb(cached_A1, 0xA1);
	outb(0x20, 0xA0); /* Non-specific EOI */
	outb(0x20, 0x20); /* Non-specific EOI to cascade */
	} else {
	cached_21 \|= 1 << d->irq;
	inb(0x21); /* DUMMY */
	outb(cached_21, 0x21);
	outb(0x20, 0x20); /* Non-specific EOI */
	}
	raw_spin_unlock_irqrestore(&i8259_lock, flags);
	}

	static void i8259_set_irq_mask(int irq_nr)
	{
	outb(cached_A1,0xA1);
	outb(cached_21,0x21);
	}

	static void i8259_mask_irq(struct irq_data *d)
	{
	unsigned long flags;

	pr_debug("i8259_mask_irq(%d)\n", d->irq);

	raw_spin_lock_irqsave(&i8259_lock, flags);
	if (d->irq < 8)
	cached_21 \|= 1 << d->irq;
	else
	cached_A1 \|= 1 << (d->irq-8);
	i8259_set_irq_mask(d->irq);
	raw_spin_unlock_irqrestore(&i8259_lock, flags);
	}

	static void i8259_unmask_irq(struct irq_data *d)
	{
	unsigned long flags;

	pr_debug("i8259_unmask_irq(%d)\n", d->irq);

	raw_spin_lock_irqsave(&i8259_lock, flags);
	if (d->irq < 8)
	cached_21 &= ~(1 << d->irq);
	else
	cached_A1 &= ~(1 << (d->irq-8));
	i8259_set_irq_mask(d->irq);
	raw_spin_unlock_irqrestore(&i8259_lock, flags);
	}

	static struct irq_chip i8259_pic = {
	.name = "i8259",
	.irq_mask = i8259_mask_irq,
	.irq_disable = i8259_mask_irq,
	.irq_unmask = i8259_unmask_irq,
	.irq_mask_ack = i8259_mask_and_ack_irq,
	};

	static struct resource pic1_iores = {
	.name = "8259 (master)",
	.start = 0x20,
	.end = 0x21,
	.flags = IORESOURCE_BUSY,
	};

	static struct resource pic2_iores = {
	.name = "8259 (slave)",
	.start = 0xa0,
	.end = 0xa1,
	.flags = IORESOURCE_BUSY,
	};

	static struct resource pic_edgectrl_iores = {
	.name = "8259 edge control",
	.start = 0x4d0,
	.end = 0x4d1,
	.flags = IORESOURCE_BUSY,
	};

	static int i8259_host_match(struct irq_host h, struct device_node node)
	{
	return h->of_node == NULL \|\| h->of_node == node;
	}

	static int i8259_host_map(struct irq_host *h, unsigned int virq,
	irq_hw_number_t hw)
	{
	pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);

	/* We block the internal cascade */
	if (hw == 2)
	irq_set_status_flags(virq, IRQ_NOREQUEST);

	/* We use the level handler only for now, we might want to
	* be more cautious here but that works for now
	*/
	irq_set_status_flags(virq, IRQ_LEVEL);
	irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq);
	return 0;
	}

	static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
	{
	/* Make sure irq is masked in hardware */
	i8259_mask_irq(irq_get_irq_data(virq));

	/* remove chip and handler */
	irq_set_chip_and_handler(virq, NULL, NULL);

	/* Make sure it's completed */
	synchronize_irq(virq);
	}

	static int i8259_host_xlate(struct irq_host h, struct device_node ct,
	const u32 *intspec, unsigned int intsize,
	irq_hw_number_t out_hwirq, unsigned int out_flags)
	{
	static unsigned char map_isa_senses[4] = {
	IRQ_TYPE_LEVEL_LOW,
	IRQ_TYPE_LEVEL_HIGH,
	IRQ_TYPE_EDGE_FALLING,
	IRQ_TYPE_EDGE_RISING,
	};

	*out_hwirq = intspec[0];
	if (intsize > 1 && intspec[1] < 4)
	*out_flags = map_isa_senses[intspec[1]];
	else
	*out_flags = IRQ_TYPE_NONE;

	return 0;
	}

	static struct irq_host_ops i8259_host_ops = {
	.match = i8259_host_match,
	.map = i8259_host_map,
	.unmap = i8259_host_unmap,
	.xlate = i8259_host_xlate,
	};

	struct irq_host *i8259_get_host(void)
	{
	return i8259_host;
	}

	/**
	* i8259_init - Initialize the legacy controller
	* @node: device node of the legacy PIC (can be NULL, but then, it will match
	* all interrupts, so beware)
	* @intack_addr: PCI interrupt acknowledge (real) address which will return
	* the active irq from the 8259
	*/
	void i8259_init(struct device_node *node, unsigned long intack_addr)
	{
	unsigned long flags;

	/* initialize the controller */
	raw_spin_lock_irqsave(&i8259_lock, flags);

	/* Mask all first */
	outb(0xff, 0xA1);
	outb(0xff, 0x21);

	/* init master interrupt controller */
	outb(0x11, 0x20); /* Start init sequence */
	outb(0x00, 0x21); /* Vector base */
	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
	outb(0x01, 0x21); /* Select 8086 mode */

	/* init slave interrupt controller */
	outb(0x11, 0xA0); /* Start init sequence */
	outb(0x08, 0xA1); /* Vector base */
	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
	outb(0x01, 0xA1); /* Select 8086 mode */

	/* That thing is slow */
	udelay(100);

	/* always read ISR */
	outb(0x0B, 0x20);
	outb(0x0B, 0xA0);

	/* Unmask the internal cascade */
	cached_21 &= ~(1 << 2);

	/* Set interrupt masks */
	outb(cached_A1, 0xA1);
	outb(cached_21, 0x21);

	raw_spin_unlock_irqrestore(&i8259_lock, flags);

	/* create a legacy host */
	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
	0, &i8259_host_ops, 0);
	if (i8259_host == NULL) {
	printk(KERN_ERR "i8259: failed to allocate irq host !\n");
	return;
	}

	/* reserve our resources */
	/* XXX should we continue doing that ? it seems to cause problems
	* with further requesting of PCI IO resources for that range...
	* need to look into it.
	*/
	request_resource(&ioport_resource, &pic1_iores);
	request_resource(&ioport_resource, &pic2_iores);
	request_resource(&ioport_resource, &pic_edgectrl_iores);

	if (intack_addr != 0)
	pci_intack = ioremap(intack_addr, 1);

	printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
	}