| /* |
| * Handling of internal CCW device requests. |
| * |
| * Copyright IBM Corp. 2009 |
| * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/err.h> |
| #include <asm/ccwdev.h> |
| #include <asm/cio.h> |
| |
| #include "io_sch.h" |
| #include "cio.h" |
| #include "device.h" |
| #include "cio_debug.h" |
| |
| /** |
| * lpm_adjust - adjust path mask |
| * @lpm: path mask to adjust |
| * @mask: mask of available paths |
| * |
| * Shift @lpm right until @lpm and @mask have at least one bit in common or |
| * until @lpm is zero. Return the resulting lpm. |
| */ |
| int lpm_adjust(int lpm, int mask) |
| { |
| while (lpm && ((lpm & mask) == 0)) |
| lpm >>= 1; |
| return lpm; |
| } |
| |
| /* |
| * Adjust path mask to use next path and reset retry count. Return resulting |
| * path mask. |
| */ |
| static u16 ccwreq_next_path(struct ccw_device *cdev) |
| { |
| struct ccw_request *req = &cdev->private->req; |
| |
| if (!req->singlepath) { |
| req->mask = 0; |
| goto out; |
| } |
| req->retries = req->maxretries; |
| req->mask = lpm_adjust(req->mask >>= 1, req->lpm); |
| out: |
| return req->mask; |
| } |
| |
| /* |
| * Clean up device state and report to callback. |
| */ |
| static void ccwreq_stop(struct ccw_device *cdev, int rc) |
| { |
| struct ccw_request *req = &cdev->private->req; |
| |
| if (req->done) |
| return; |
| req->done = 1; |
| ccw_device_set_timeout(cdev, 0); |
| memset(&cdev->private->irb, 0, sizeof(struct irb)); |
| if (rc && rc != -ENODEV && req->drc) |
| rc = req->drc; |
| req->callback(cdev, req->data, rc); |
| } |
| |
| /* |
| * (Re-)Start the operation until retries and paths are exhausted. |
| */ |
| static void ccwreq_do(struct ccw_device *cdev) |
| { |
| struct ccw_request *req = &cdev->private->req; |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); |
| struct ccw1 *cp = req->cp; |
| int rc = -EACCES; |
| |
| while (req->mask) { |
| if (req->retries-- == 0) { |
| /* Retries exhausted, try next path. */ |
| ccwreq_next_path(cdev); |
| continue; |
| } |
| /* Perform start function. */ |
| memset(&cdev->private->irb, 0, sizeof(struct irb)); |
| rc = cio_start(sch, cp, (u8) req->mask); |
| if (rc == 0) { |
| /* I/O started successfully. */ |
| ccw_device_set_timeout(cdev, req->timeout); |
| return; |
| } |
| if (rc == -ENODEV) { |
| /* Permanent device error. */ |
| break; |
| } |
| if (rc == -EACCES) { |
| /* Permant path error. */ |
| ccwreq_next_path(cdev); |
| continue; |
| } |
| /* Temporary improper status. */ |
| rc = cio_clear(sch); |
| if (rc) |
| break; |
| return; |
| } |
| ccwreq_stop(cdev, rc); |
| } |
| |
| /** |
| * ccw_request_start - perform I/O request |
| * @cdev: ccw device |
| * |
| * Perform the I/O request specified by cdev->req. |
| */ |
| void ccw_request_start(struct ccw_device *cdev) |
| { |
| struct ccw_request *req = &cdev->private->req; |
| |
| if (req->singlepath) { |
| /* Try all paths twice to counter link flapping. */ |
| req->mask = 0x8080; |
| } else |
| req->mask = req->lpm; |
| |
| req->retries = req->maxretries; |
| req->mask = lpm_adjust(req->mask, req->lpm); |
| req->drc = 0; |
| req->done = 0; |
| req->cancel = 0; |
| if (!req->mask) |
| goto out_nopath; |
| ccwreq_do(cdev); |
| return; |
| |
| out_nopath: |
| ccwreq_stop(cdev, -EACCES); |
| } |
| |
| /** |
| * ccw_request_cancel - cancel running I/O request |
| * @cdev: ccw device |
| * |
| * Cancel the I/O request specified by cdev->req. Return non-zero if request |
| * has already finished, zero otherwise. |
| */ |
| int ccw_request_cancel(struct ccw_device *cdev) |
| { |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); |
| struct ccw_request *req = &cdev->private->req; |
| int rc; |
| |
| if (req->done) |
| return 1; |
| req->cancel = 1; |
| rc = cio_clear(sch); |
| if (rc) |
| ccwreq_stop(cdev, rc); |
| return 0; |
| } |
| |
| /* |
| * Return the status of the internal I/O started on the specified ccw device. |
| * Perform BASIC SENSE if required. |
| */ |
| static enum io_status ccwreq_status(struct ccw_device *cdev, struct irb *lcirb) |
| { |
| struct irb *irb = &cdev->private->irb; |
| struct cmd_scsw *scsw = &irb->scsw.cmd; |
| enum uc_todo todo; |
| |
| /* Perform BASIC SENSE if needed. */ |
| if (ccw_device_accumulate_and_sense(cdev, lcirb)) |
| return IO_RUNNING; |
| /* Check for halt/clear interrupt. */ |
| if (scsw->fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) |
| return IO_KILLED; |
| /* Check for path error. */ |
| if (scsw->cc == 3 || scsw->pno) |
| return IO_PATH_ERROR; |
| /* Handle BASIC SENSE data. */ |
| if (irb->esw.esw0.erw.cons) { |
| CIO_TRACE_EVENT(2, "sensedata"); |
| CIO_HEX_EVENT(2, &cdev->private->dev_id, |
| sizeof(struct ccw_dev_id)); |
| CIO_HEX_EVENT(2, &cdev->private->irb.ecw, SENSE_MAX_COUNT); |
| /* Check for command reject. */ |
| if (irb->ecw[0] & SNS0_CMD_REJECT) |
| return IO_REJECTED; |
| /* Ask the driver what to do */ |
| if (cdev->drv && cdev->drv->uc_handler) { |
| todo = cdev->drv->uc_handler(cdev, lcirb); |
| CIO_TRACE_EVENT(2, "uc_response"); |
| CIO_HEX_EVENT(2, &todo, sizeof(todo)); |
| switch (todo) { |
| case UC_TODO_RETRY: |
| return IO_STATUS_ERROR; |
| case UC_TODO_RETRY_ON_NEW_PATH: |
| return IO_PATH_ERROR; |
| case UC_TODO_STOP: |
| return IO_REJECTED; |
| default: |
| return IO_STATUS_ERROR; |
| } |
| } |
| /* Assume that unexpected SENSE data implies an error. */ |
| return IO_STATUS_ERROR; |
| } |
| /* Check for channel errors. */ |
| if (scsw->cstat != 0) |
| return IO_STATUS_ERROR; |
| /* Check for device errors. */ |
| if (scsw->dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) |
| return IO_STATUS_ERROR; |
| /* Check for final state. */ |
| if (!(scsw->dstat & DEV_STAT_DEV_END)) |
| return IO_RUNNING; |
| /* Check for other improper status. */ |
| if (scsw->cc == 1 && (scsw->stctl & SCSW_STCTL_ALERT_STATUS)) |
| return IO_STATUS_ERROR; |
| return IO_DONE; |
| } |
| |
| /* |
| * Log ccw request status. |
| */ |
| static void ccwreq_log_status(struct ccw_device *cdev, enum io_status status) |
| { |
| struct ccw_request *req = &cdev->private->req; |
| struct { |
| struct ccw_dev_id dev_id; |
| u16 retries; |
| u8 lpm; |
| u8 status; |
| } __attribute__ ((packed)) data; |
| data.dev_id = cdev->private->dev_id; |
| data.retries = req->retries; |
| data.lpm = (u8) req->mask; |
| data.status = (u8) status; |
| CIO_TRACE_EVENT(2, "reqstat"); |
| CIO_HEX_EVENT(2, &data, sizeof(data)); |
| } |
| |
| /** |
| * ccw_request_handler - interrupt handler for I/O request procedure. |
| * @cdev: ccw device |
| * |
| * Handle interrupt during I/O request procedure. |
| */ |
| void ccw_request_handler(struct ccw_device *cdev) |
| { |
| struct irb *irb = (struct irb *)&S390_lowcore.irb; |
| struct ccw_request *req = &cdev->private->req; |
| enum io_status status; |
| int rc = -EOPNOTSUPP; |
| |
| /* Check status of I/O request. */ |
| status = ccwreq_status(cdev, irb); |
| if (req->filter) |
| status = req->filter(cdev, req->data, irb, status); |
| if (status != IO_RUNNING) |
| ccw_device_set_timeout(cdev, 0); |
| if (status != IO_DONE && status != IO_RUNNING) |
| ccwreq_log_status(cdev, status); |
| switch (status) { |
| case IO_DONE: |
| break; |
| case IO_RUNNING: |
| return; |
| case IO_REJECTED: |
| goto err; |
| case IO_PATH_ERROR: |
| goto out_next_path; |
| case IO_STATUS_ERROR: |
| goto out_restart; |
| case IO_KILLED: |
| /* Check if request was cancelled on purpose. */ |
| if (req->cancel) { |
| rc = -EIO; |
| goto err; |
| } |
| goto out_restart; |
| } |
| /* Check back with request initiator. */ |
| if (!req->check) |
| goto out; |
| switch (req->check(cdev, req->data)) { |
| case 0: |
| break; |
| case -EAGAIN: |
| goto out_restart; |
| case -EACCES: |
| goto out_next_path; |
| default: |
| goto err; |
| } |
| out: |
| ccwreq_stop(cdev, 0); |
| return; |
| |
| out_next_path: |
| /* Try next path and restart I/O. */ |
| if (!ccwreq_next_path(cdev)) { |
| rc = -EACCES; |
| goto err; |
| } |
| out_restart: |
| /* Restart. */ |
| ccwreq_do(cdev); |
| return; |
| err: |
| ccwreq_stop(cdev, rc); |
| } |
| |
| |
| /** |
| * ccw_request_timeout - timeout handler for I/O request procedure |
| * @cdev: ccw device |
| * |
| * Handle timeout during I/O request procedure. |
| */ |
| void ccw_request_timeout(struct ccw_device *cdev) |
| { |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); |
| struct ccw_request *req = &cdev->private->req; |
| int rc; |
| |
| if (!ccwreq_next_path(cdev)) { |
| /* set the final return code for this request */ |
| req->drc = -ETIME; |
| } |
| rc = cio_clear(sch); |
| if (rc) |
| goto err; |
| return; |
| |
| err: |
| ccwreq_stop(cdev, rc); |
| } |
| |
| /** |
| * ccw_request_notoper - notoper handler for I/O request procedure |
| * @cdev: ccw device |
| * |
| * Handle timeout during I/O request procedure. |
| */ |
| void ccw_request_notoper(struct ccw_device *cdev) |
| { |
| ccwreq_stop(cdev, -ENODEV); |
| } |