| /* |
| * wm831x-ldo.c -- LDO driver for the WM831x series |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/wm831x/core.h> |
| #include <linux/mfd/wm831x/regulator.h> |
| #include <linux/mfd/wm831x/pdata.h> |
| |
| #define WM831X_LDO_MAX_NAME 6 |
| |
| #define WM831X_LDO_CONTROL 0 |
| #define WM831X_LDO_ON_CONTROL 1 |
| #define WM831X_LDO_SLEEP_CONTROL 2 |
| |
| #define WM831X_ALIVE_LDO_ON_CONTROL 0 |
| #define WM831X_ALIVE_LDO_SLEEP_CONTROL 1 |
| |
| struct wm831x_ldo { |
| char name[WM831X_LDO_MAX_NAME]; |
| struct regulator_desc desc; |
| int base; |
| struct wm831x *wm831x; |
| struct regulator_dev *regulator; |
| }; |
| |
| /* |
| * Shared |
| */ |
| |
| static int wm831x_ldo_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| int reg; |
| |
| reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE); |
| if (reg < 0) |
| return reg; |
| |
| if (reg & mask) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static int wm831x_ldo_enable(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| |
| return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask); |
| } |
| |
| static int wm831x_ldo_disable(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| |
| return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0); |
| } |
| |
| static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) |
| { |
| struct wm831x_ldo *ldo = data; |
| |
| regulator_notifier_call_chain(ldo->regulator, |
| REGULATOR_EVENT_UNDER_VOLTAGE, |
| NULL); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * General purpose LDOs |
| */ |
| |
| #define WM831X_GP_LDO_SELECTOR_LOW 0xe |
| #define WM831X_GP_LDO_MAX_SELECTOR 0x1f |
| |
| static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| /* 0.9-1.6V in 50mV steps */ |
| if (selector <= WM831X_GP_LDO_SELECTOR_LOW) |
| return 900000 + (selector * 50000); |
| /* 1.7-3.3V in 50mV steps */ |
| if (selector <= WM831X_GP_LDO_MAX_SELECTOR) |
| return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW) |
| * 100000); |
| return -EINVAL; |
| } |
| |
| static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int vsel, ret; |
| |
| if (min_uV < 900000) |
| vsel = 0; |
| else if (min_uV < 1700000) |
| vsel = ((min_uV - 900000) / 50000); |
| else |
| vsel = ((min_uV - 1700000) / 100000) |
| + WM831X_GP_LDO_SELECTOR_LOW + 1; |
| |
| ret = wm831x_gp_ldo_list_voltage(rdev, vsel); |
| if (ret < 0) |
| return ret; |
| if (ret < min_uV || ret > max_uV) |
| return -EINVAL; |
| |
| return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel); |
| } |
| |
| static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| |
| return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); |
| } |
| |
| static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev, |
| int uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; |
| |
| return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV); |
| } |
| |
| static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, reg); |
| if (ret < 0) |
| return ret; |
| |
| ret &= WM831X_LDO1_ON_VSEL_MASK; |
| |
| return wm831x_gp_ldo_list_voltage(rdev, ret); |
| } |
| |
| static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; |
| int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, on_reg); |
| if (ret < 0) |
| return ret; |
| |
| if (!(ret & WM831X_LDO1_ON_MODE)) |
| return REGULATOR_MODE_NORMAL; |
| |
| ret = wm831x_reg_read(wm831x, ctrl_reg); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & WM831X_LDO1_LP_MODE) |
| return REGULATOR_MODE_STANDBY; |
| else |
| return REGULATOR_MODE_IDLE; |
| } |
| |
| static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; |
| int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| ret = wm831x_set_bits(wm831x, on_reg, |
| WM831X_LDO1_ON_MODE, 0); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case REGULATOR_MODE_IDLE: |
| ret = wm831x_set_bits(wm831x, ctrl_reg, |
| WM831X_LDO1_LP_MODE, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = wm831x_set_bits(wm831x, on_reg, |
| WM831X_LDO1_ON_MODE, |
| WM831X_LDO1_ON_MODE); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case REGULATOR_MODE_STANDBY: |
| ret = wm831x_set_bits(wm831x, ctrl_reg, |
| WM831X_LDO1_LP_MODE, |
| WM831X_LDO1_LP_MODE); |
| if (ret < 0) |
| return ret; |
| |
| ret = wm831x_set_bits(wm831x, on_reg, |
| WM831X_LDO1_ON_MODE, |
| WM831X_LDO1_ON_MODE); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| int ret; |
| |
| /* Is the regulator on? */ |
| ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); |
| if (ret < 0) |
| return ret; |
| if (!(ret & mask)) |
| return REGULATOR_STATUS_OFF; |
| |
| /* Is it reporting under voltage? */ |
| ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); |
| if (ret & mask) |
| return REGULATOR_STATUS_ERROR; |
| |
| ret = wm831x_gp_ldo_get_mode(rdev); |
| if (ret < 0) |
| return ret; |
| else |
| return regulator_mode_to_status(ret); |
| } |
| |
| static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev, |
| int input_uV, |
| int output_uV, int load_uA) |
| { |
| if (load_uA < 20000) |
| return REGULATOR_MODE_STANDBY; |
| if (load_uA < 50000) |
| return REGULATOR_MODE_IDLE; |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| |
| static struct regulator_ops wm831x_gp_ldo_ops = { |
| .list_voltage = wm831x_gp_ldo_list_voltage, |
| .get_voltage = wm831x_gp_ldo_get_voltage, |
| .set_voltage = wm831x_gp_ldo_set_voltage, |
| .set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage, |
| .get_mode = wm831x_gp_ldo_get_mode, |
| .set_mode = wm831x_gp_ldo_set_mode, |
| .get_status = wm831x_gp_ldo_get_status, |
| .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode, |
| |
| .is_enabled = wm831x_ldo_is_enabled, |
| .enable = wm831x_ldo_enable, |
| .disable = wm831x_ldo_disable, |
| }; |
| |
| static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| int id = pdev->id % ARRAY_SIZE(pdata->ldo); |
| struct wm831x_ldo *ldo; |
| struct resource *res; |
| int ret, irq; |
| |
| dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); |
| |
| if (pdata == NULL || pdata->ldo[id] == NULL) |
| return -ENODEV; |
| |
| ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); |
| if (ldo == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->wm831x = wm831x; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "No I/O resource\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| ldo->base = res->start; |
| |
| snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); |
| ldo->desc.name = ldo->name; |
| ldo->desc.id = id; |
| ldo->desc.type = REGULATOR_VOLTAGE; |
| ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1; |
| ldo->desc.ops = &wm831x_gp_ldo_ops; |
| ldo->desc.owner = THIS_MODULE; |
| |
| ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, |
| pdata->ldo[id], ldo); |
| if (IS_ERR(ldo->regulator)) { |
| ret = PTR_ERR(ldo->regulator); |
| dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", |
| id + 1, ret); |
| goto err; |
| } |
| |
| irq = platform_get_irq_byname(pdev, "UV"); |
| ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, |
| IRQF_TRIGGER_RISING, ldo->name, |
| ldo); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", |
| irq, ret); |
| goto err_regulator; |
| } |
| |
| platform_set_drvdata(pdev, ldo); |
| |
| return 0; |
| |
| err_regulator: |
| regulator_unregister(ldo->regulator); |
| err: |
| kfree(ldo); |
| return ret; |
| } |
| |
| static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev) |
| { |
| struct wm831x_ldo *ldo = platform_get_drvdata(pdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); |
| regulator_unregister(ldo->regulator); |
| kfree(ldo); |
| |
| return 0; |
| } |
| |
| static struct platform_driver wm831x_gp_ldo_driver = { |
| .probe = wm831x_gp_ldo_probe, |
| .remove = __devexit_p(wm831x_gp_ldo_remove), |
| .driver = { |
| .name = "wm831x-ldo", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /* |
| * Analogue LDOs |
| */ |
| |
| |
| #define WM831X_ALDO_SELECTOR_LOW 0xc |
| #define WM831X_ALDO_MAX_SELECTOR 0x1f |
| |
| static int wm831x_aldo_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| /* 1-1.6V in 50mV steps */ |
| if (selector <= WM831X_ALDO_SELECTOR_LOW) |
| return 1000000 + (selector * 50000); |
| /* 1.7-3.5V in 50mV steps */ |
| if (selector <= WM831X_ALDO_MAX_SELECTOR) |
| return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW) |
| * 100000); |
| return -EINVAL; |
| } |
| |
| static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int vsel, ret; |
| |
| if (min_uV < 1000000) |
| vsel = 0; |
| else if (min_uV < 1700000) |
| vsel = ((min_uV - 1000000) / 50000); |
| else |
| vsel = ((min_uV - 1700000) / 100000) |
| + WM831X_ALDO_SELECTOR_LOW + 1; |
| |
| ret = wm831x_aldo_list_voltage(rdev, vsel); |
| if (ret < 0) |
| return ret; |
| if (ret < min_uV || ret > max_uV) |
| return -EINVAL; |
| |
| return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel); |
| } |
| |
| static int wm831x_aldo_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| |
| return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV); |
| } |
| |
| static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev, |
| int uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; |
| |
| return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV); |
| } |
| |
| static int wm831x_aldo_get_voltage(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, reg); |
| if (ret < 0) |
| return ret; |
| |
| ret &= WM831X_LDO7_ON_VSEL_MASK; |
| |
| return wm831x_aldo_list_voltage(rdev, ret); |
| } |
| |
| static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, on_reg); |
| if (ret < 0) |
| return 0; |
| |
| if (ret & WM831X_LDO7_ON_MODE) |
| return REGULATOR_MODE_IDLE; |
| else |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int wm831x_aldo_set_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; |
| int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; |
| int ret; |
| |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| ret = wm831x_set_bits(wm831x, on_reg, |
| WM831X_LDO7_ON_MODE, 0); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case REGULATOR_MODE_IDLE: |
| ret = wm831x_set_bits(wm831x, ctrl_reg, |
| WM831X_LDO7_ON_MODE, |
| WM831X_LDO7_ON_MODE); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_aldo_get_status(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| int ret; |
| |
| /* Is the regulator on? */ |
| ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); |
| if (ret < 0) |
| return ret; |
| if (!(ret & mask)) |
| return REGULATOR_STATUS_OFF; |
| |
| /* Is it reporting under voltage? */ |
| ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); |
| if (ret & mask) |
| return REGULATOR_STATUS_ERROR; |
| |
| ret = wm831x_aldo_get_mode(rdev); |
| if (ret < 0) |
| return ret; |
| else |
| return regulator_mode_to_status(ret); |
| } |
| |
| static struct regulator_ops wm831x_aldo_ops = { |
| .list_voltage = wm831x_aldo_list_voltage, |
| .get_voltage = wm831x_aldo_get_voltage, |
| .set_voltage = wm831x_aldo_set_voltage, |
| .set_suspend_voltage = wm831x_aldo_set_suspend_voltage, |
| .get_mode = wm831x_aldo_get_mode, |
| .set_mode = wm831x_aldo_set_mode, |
| .get_status = wm831x_aldo_get_status, |
| |
| .is_enabled = wm831x_ldo_is_enabled, |
| .enable = wm831x_ldo_enable, |
| .disable = wm831x_ldo_disable, |
| }; |
| |
| static __devinit int wm831x_aldo_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| int id = pdev->id % ARRAY_SIZE(pdata->ldo); |
| struct wm831x_ldo *ldo; |
| struct resource *res; |
| int ret, irq; |
| |
| dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); |
| |
| if (pdata == NULL || pdata->ldo[id] == NULL) |
| return -ENODEV; |
| |
| ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); |
| if (ldo == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->wm831x = wm831x; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "No I/O resource\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| ldo->base = res->start; |
| |
| snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); |
| ldo->desc.name = ldo->name; |
| ldo->desc.id = id; |
| ldo->desc.type = REGULATOR_VOLTAGE; |
| ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1; |
| ldo->desc.ops = &wm831x_aldo_ops; |
| ldo->desc.owner = THIS_MODULE; |
| |
| ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, |
| pdata->ldo[id], ldo); |
| if (IS_ERR(ldo->regulator)) { |
| ret = PTR_ERR(ldo->regulator); |
| dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", |
| id + 1, ret); |
| goto err; |
| } |
| |
| irq = platform_get_irq_byname(pdev, "UV"); |
| ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, |
| IRQF_TRIGGER_RISING, ldo->name, |
| ldo); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", |
| irq, ret); |
| goto err_regulator; |
| } |
| |
| platform_set_drvdata(pdev, ldo); |
| |
| return 0; |
| |
| err_regulator: |
| regulator_unregister(ldo->regulator); |
| err: |
| kfree(ldo); |
| return ret; |
| } |
| |
| static __devexit int wm831x_aldo_remove(struct platform_device *pdev) |
| { |
| struct wm831x_ldo *ldo = platform_get_drvdata(pdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| |
| wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); |
| regulator_unregister(ldo->regulator); |
| kfree(ldo); |
| |
| return 0; |
| } |
| |
| static struct platform_driver wm831x_aldo_driver = { |
| .probe = wm831x_aldo_probe, |
| .remove = __devexit_p(wm831x_aldo_remove), |
| .driver = { |
| .name = "wm831x-aldo", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /* |
| * Alive LDO |
| */ |
| |
| #define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf |
| |
| static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| /* 0.8-1.55V in 50mV steps */ |
| if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR) |
| return 800000 + (selector * 50000); |
| return -EINVAL; |
| } |
| |
| static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev, |
| int reg, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int vsel, ret; |
| |
| vsel = (min_uV - 800000) / 50000; |
| |
| ret = wm831x_alive_ldo_list_voltage(rdev, vsel); |
| if (ret < 0) |
| return ret; |
| if (ret < min_uV || ret > max_uV) |
| return -EINVAL; |
| |
| return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel); |
| } |
| |
| static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; |
| |
| return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); |
| } |
| |
| static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev, |
| int uV) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL; |
| |
| return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV); |
| } |
| |
| static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, reg); |
| if (ret < 0) |
| return ret; |
| |
| ret &= WM831X_LDO11_ON_VSEL_MASK; |
| |
| return wm831x_alive_ldo_list_voltage(rdev, ret); |
| } |
| |
| static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev) |
| { |
| struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = ldo->wm831x; |
| int mask = 1 << rdev_get_id(rdev); |
| int ret; |
| |
| /* Is the regulator on? */ |
| ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); |
| if (ret < 0) |
| return ret; |
| if (ret & mask) |
| return REGULATOR_STATUS_ON; |
| else |
| return REGULATOR_STATUS_OFF; |
| } |
| |
| static struct regulator_ops wm831x_alive_ldo_ops = { |
| .list_voltage = wm831x_alive_ldo_list_voltage, |
| .get_voltage = wm831x_alive_ldo_get_voltage, |
| .set_voltage = wm831x_alive_ldo_set_voltage, |
| .set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage, |
| .get_status = wm831x_alive_ldo_get_status, |
| |
| .is_enabled = wm831x_ldo_is_enabled, |
| .enable = wm831x_ldo_enable, |
| .disable = wm831x_ldo_disable, |
| }; |
| |
| static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| int id = pdev->id % ARRAY_SIZE(pdata->ldo); |
| struct wm831x_ldo *ldo; |
| struct resource *res; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); |
| |
| if (pdata == NULL || pdata->ldo[id] == NULL) |
| return -ENODEV; |
| |
| ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); |
| if (ldo == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->wm831x = wm831x; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "No I/O resource\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| ldo->base = res->start; |
| |
| snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); |
| ldo->desc.name = ldo->name; |
| ldo->desc.id = id; |
| ldo->desc.type = REGULATOR_VOLTAGE; |
| ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1; |
| ldo->desc.ops = &wm831x_alive_ldo_ops; |
| ldo->desc.owner = THIS_MODULE; |
| |
| ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, |
| pdata->ldo[id], ldo); |
| if (IS_ERR(ldo->regulator)) { |
| ret = PTR_ERR(ldo->regulator); |
| dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", |
| id + 1, ret); |
| goto err; |
| } |
| |
| platform_set_drvdata(pdev, ldo); |
| |
| return 0; |
| |
| err: |
| kfree(ldo); |
| return ret; |
| } |
| |
| static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev) |
| { |
| struct wm831x_ldo *ldo = platform_get_drvdata(pdev); |
| |
| regulator_unregister(ldo->regulator); |
| kfree(ldo); |
| |
| return 0; |
| } |
| |
| static struct platform_driver wm831x_alive_ldo_driver = { |
| .probe = wm831x_alive_ldo_probe, |
| .remove = __devexit_p(wm831x_alive_ldo_remove), |
| .driver = { |
| .name = "wm831x-alive-ldo", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init wm831x_ldo_init(void) |
| { |
| int ret; |
| |
| ret = platform_driver_register(&wm831x_gp_ldo_driver); |
| if (ret != 0) |
| pr_err("Failed to register WM831x GP LDO driver: %d\n", ret); |
| |
| ret = platform_driver_register(&wm831x_aldo_driver); |
| if (ret != 0) |
| pr_err("Failed to register WM831x ALDO driver: %d\n", ret); |
| |
| ret = platform_driver_register(&wm831x_alive_ldo_driver); |
| if (ret != 0) |
| pr_err("Failed to register WM831x alive LDO driver: %d\n", |
| ret); |
| |
| return 0; |
| } |
| subsys_initcall(wm831x_ldo_init); |
| |
| static void __exit wm831x_ldo_exit(void) |
| { |
| platform_driver_unregister(&wm831x_alive_ldo_driver); |
| platform_driver_unregister(&wm831x_aldo_driver); |
| platform_driver_unregister(&wm831x_gp_ldo_driver); |
| } |
| module_exit(wm831x_ldo_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("WM831x LDO driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm831x-ldo"); |
| MODULE_ALIAS("platform:wm831x-aldo"); |
| MODULE_ALIAS("platform:wm831x-aliveldo"); |