| #include "cmd.h" |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/crc7.h> |
| |
| #include "wl1251.h" |
| #include "reg.h" |
| #include "io.h" |
| #include "ps.h" |
| #include "acx.h" |
| |
| /** |
| * send command to firmware |
| * |
| * @wl: wl struct |
| * @id: command id |
| * @buf: buffer containing the command, must work with dma |
| * @len: length of the buffer |
| */ |
| int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len) |
| { |
| struct wl1251_cmd_header *cmd; |
| unsigned long timeout; |
| u32 intr; |
| int ret = 0; |
| |
| cmd = buf; |
| cmd->id = id; |
| cmd->status = 0; |
| |
| WARN_ON(len % 4 != 0); |
| |
| wl1251_mem_write(wl, wl->cmd_box_addr, buf, len); |
| |
| wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); |
| |
| timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT); |
| |
| intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) { |
| if (time_after(jiffies, timeout)) { |
| wl1251_error("command complete timeout"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| msleep(1); |
| |
| intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| } |
| |
| wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK, |
| WL1251_ACX_INTR_CMD_COMPLETE); |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * send test command to firmware |
| * |
| * @wl: wl struct |
| * @buf: buffer containing the command, with all headers, must work with dma |
| * @len: length of the buffer |
| * @answer: is answer needed |
| */ |
| int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) |
| { |
| int ret; |
| |
| wl1251_debug(DEBUG_CMD, "cmd test"); |
| |
| ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len); |
| |
| if (ret < 0) { |
| wl1251_warning("TEST command failed"); |
| return ret; |
| } |
| |
| if (answer) { |
| struct wl1251_command *cmd_answer; |
| |
| /* |
| * The test command got in, we can read the answer. |
| * The answer would be a wl1251_command, where the |
| * parameter array contains the actual answer. |
| */ |
| wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len); |
| |
| cmd_answer = buf; |
| |
| if (cmd_answer->header.status != CMD_STATUS_SUCCESS) |
| wl1251_error("TEST command answer error: %d", |
| cmd_answer->header.status); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * read acx from firmware |
| * |
| * @wl: wl struct |
| * @id: acx id |
| * @buf: buffer for the response, including all headers, must work with dma |
| * @len: lenght of buf |
| */ |
| int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) |
| { |
| struct acx_header *acx = buf; |
| int ret; |
| |
| wl1251_debug(DEBUG_CMD, "cmd interrogate"); |
| |
| acx->id = id; |
| |
| /* payload length, does not include any headers */ |
| acx->len = len - sizeof(*acx); |
| |
| ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); |
| if (ret < 0) { |
| wl1251_error("INTERROGATE command failed"); |
| goto out; |
| } |
| |
| /* the interrogate command got in, we can read the answer */ |
| wl1251_mem_read(wl, wl->cmd_box_addr, buf, len); |
| |
| acx = buf; |
| if (acx->cmd.status != CMD_STATUS_SUCCESS) |
| wl1251_error("INTERROGATE command error: %d", |
| acx->cmd.status); |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * write acx value to firmware |
| * |
| * @wl: wl struct |
| * @id: acx id |
| * @buf: buffer containing acx, including all headers, must work with dma |
| * @len: length of buf |
| */ |
| int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len) |
| { |
| struct acx_header *acx = buf; |
| int ret; |
| |
| wl1251_debug(DEBUG_CMD, "cmd configure"); |
| |
| acx->id = id; |
| |
| /* payload length, does not include any headers */ |
| acx->len = len - sizeof(*acx); |
| |
| ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len); |
| if (ret < 0) { |
| wl1251_warning("CONFIGURE command NOK"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, |
| void *bitmap, u16 bitmap_len, u8 bitmap_control) |
| { |
| struct wl1251_cmd_vbm_update *vbm; |
| int ret; |
| |
| wl1251_debug(DEBUG_CMD, "cmd vbm"); |
| |
| vbm = kzalloc(sizeof(*vbm), GFP_KERNEL); |
| if (!vbm) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Count and period will be filled by the target */ |
| vbm->tim.bitmap_ctrl = bitmap_control; |
| if (bitmap_len > PARTIAL_VBM_MAX) { |
| wl1251_warning("cmd vbm len is %d B, truncating to %d", |
| bitmap_len, PARTIAL_VBM_MAX); |
| bitmap_len = PARTIAL_VBM_MAX; |
| } |
| memcpy(vbm->tim.pvb_field, bitmap, bitmap_len); |
| vbm->tim.identity = identity; |
| vbm->tim.length = bitmap_len + 3; |
| |
| vbm->len = cpu_to_le16(bitmap_len + 5); |
| |
| ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm)); |
| if (ret < 0) { |
| wl1251_error("VBM command failed"); |
| goto out; |
| } |
| |
| out: |
| kfree(vbm); |
| return ret; |
| } |
| |
| int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable) |
| { |
| struct cmd_enabledisable_path *cmd; |
| int ret; |
| u16 cmd_rx, cmd_tx; |
| |
| wl1251_debug(DEBUG_CMD, "cmd data path"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cmd->channel = channel; |
| |
| if (enable) { |
| cmd_rx = CMD_ENABLE_RX; |
| cmd_tx = CMD_ENABLE_TX; |
| } else { |
| cmd_rx = CMD_DISABLE_RX; |
| cmd_tx = CMD_DISABLE_TX; |
| } |
| |
| ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1251_error("rx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| goto out; |
| } |
| |
| wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1251_error("tx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| return ret; |
| } |
| |
| wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, |
| u16 beacon_interval, u8 dtim_interval) |
| { |
| struct cmd_join *join; |
| int ret, i; |
| u8 *bssid; |
| |
| join = kzalloc(sizeof(*join), GFP_KERNEL); |
| if (!join) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d", |
| bss_type == BSS_TYPE_IBSS ? " ibss" : "", |
| channel, beacon_interval, dtim_interval); |
| |
| /* Reverse order BSSID */ |
| bssid = (u8 *) &join->bssid_lsb; |
| for (i = 0; i < ETH_ALEN; i++) |
| bssid[i] = wl->bssid[ETH_ALEN - i - 1]; |
| |
| join->rx_config_options = wl->rx_config; |
| join->rx_filter_options = wl->rx_filter; |
| |
| /* |
| * FIXME: disable temporarily all filters because after commit |
| * 9cef8737 "mac80211: fix managed mode BSSID handling" broke |
| * association. The filter logic needs to be implemented properly |
| * and once that is done, this hack can be removed. |
| */ |
| join->rx_config_options = 0; |
| join->rx_filter_options = WL1251_DEFAULT_RX_FILTER; |
| |
| join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | |
| RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; |
| |
| join->beacon_interval = beacon_interval; |
| join->dtim_interval = dtim_interval; |
| join->bss_type = bss_type; |
| join->channel = channel; |
| join->ctrl = JOIN_CMD_CTRL_TX_FLUSH; |
| |
| ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); |
| if (ret < 0) { |
| wl1251_error("failed to initiate cmd join"); |
| goto out; |
| } |
| |
| out: |
| kfree(join); |
| return ret; |
| } |
| |
| int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode) |
| { |
| struct wl1251_cmd_ps_params *ps_params = NULL; |
| int ret = 0; |
| |
| wl1251_debug(DEBUG_CMD, "cmd set ps mode"); |
| |
| ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); |
| if (!ps_params) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ps_params->ps_mode = ps_mode; |
| ps_params->send_null_data = 1; |
| ps_params->retries = 5; |
| ps_params->hang_over_period = 128; |
| ps_params->null_data_rate = 1; /* 1 Mbps */ |
| |
| ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params, |
| sizeof(*ps_params)); |
| if (ret < 0) { |
| wl1251_error("cmd set_ps_mode failed"); |
| goto out; |
| } |
| |
| out: |
| kfree(ps_params); |
| return ret; |
| } |
| |
| int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, |
| size_t len) |
| { |
| struct cmd_read_write_memory *cmd; |
| int ret = 0; |
| |
| wl1251_debug(DEBUG_CMD, "cmd read memory"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| WARN_ON(len > MAX_READ_SIZE); |
| len = min_t(size_t, len, MAX_READ_SIZE); |
| |
| cmd->addr = addr; |
| cmd->size = len; |
| |
| ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1251_error("read memory command failed: %d", ret); |
| goto out; |
| } |
| |
| /* the read command got in, we can now read the answer */ |
| wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); |
| |
| if (cmd->header.status != CMD_STATUS_SUCCESS) |
| wl1251_error("error in read command result: %d", |
| cmd->header.status); |
| |
| memcpy(answer, cmd->value, len); |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, |
| void *buf, size_t buf_len) |
| { |
| struct wl1251_cmd_packet_template *cmd; |
| size_t cmd_len; |
| int ret = 0; |
| |
| wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id); |
| |
| WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE); |
| buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE); |
| cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4); |
| |
| cmd = kzalloc(cmd_len, GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cmd->size = cpu_to_le16(buf_len); |
| |
| if (buf) |
| memcpy(cmd->data, buf, buf_len); |
| |
| ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len); |
| if (ret < 0) { |
| wl1251_warning("cmd set_template failed: %d", ret); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, |
| struct ieee80211_channel *channels[], |
| unsigned int n_channels, unsigned int n_probes) |
| { |
| struct wl1251_cmd_scan *cmd; |
| int i, ret = 0; |
| |
| wl1251_debug(DEBUG_CMD, "cmd scan"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); |
| cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN | |
| CFG_RX_MGMT_EN | |
| CFG_RX_BCN_EN); |
| cmd->params.scan_options = 0; |
| cmd->params.num_channels = n_channels; |
| cmd->params.num_probe_requests = n_probes; |
| cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */ |
| cmd->params.tid_trigger = 0; |
| |
| for (i = 0; i < n_channels; i++) { |
| cmd->channels[i].min_duration = |
| cpu_to_le32(WL1251_SCAN_MIN_DURATION); |
| cmd->channels[i].max_duration = |
| cpu_to_le32(WL1251_SCAN_MAX_DURATION); |
| memset(&cmd->channels[i].bssid_lsb, 0xff, 4); |
| memset(&cmd->channels[i].bssid_msb, 0xff, 2); |
| cmd->channels[i].early_termination = 0; |
| cmd->channels[i].tx_power_att = 0; |
| cmd->channels[i].channel = channels[i]->hw_value; |
| } |
| |
| cmd->params.ssid_len = ssid_len; |
| if (ssid) |
| memcpy(cmd->params.ssid, ssid, ssid_len); |
| |
| ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1251_error("cmd scan failed: %d", ret); |
| goto out; |
| } |
| |
| wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); |
| |
| if (cmd->header.status != CMD_STATUS_SUCCESS) { |
| wl1251_error("cmd scan status wasn't success: %d", |
| cmd->header.status); |
| ret = -EIO; |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout) |
| { |
| struct wl1251_cmd_trigger_scan_to *cmd; |
| int ret; |
| |
| wl1251_debug(DEBUG_CMD, "cmd trigger scan to"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->timeout = timeout; |
| |
| ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1251_error("cmd trigger scan to failed: %d", ret); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |