| /* |
| * Agere Systems Inc. |
| * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs |
| * |
| * Copyright © 2005 Agere Systems Inc. |
| * All rights reserved. |
| * http://www.agere.com |
| * |
| *------------------------------------------------------------------------------ |
| * |
| * et1310_tx.c - Routines used to perform data transmission. |
| * |
| *------------------------------------------------------------------------------ |
| * |
| * SOFTWARE LICENSE |
| * |
| * This software is provided subject to the following terms and conditions, |
| * which you should read carefully before using the software. Using this |
| * software indicates your acceptance of these terms and conditions. If you do |
| * not agree with these terms and conditions, do not use the software. |
| * |
| * Copyright © 2005 Agere Systems Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source or binary forms, with or without |
| * modifications, are permitted provided that the following conditions are met: |
| * |
| * . Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following Disclaimer as comments in the code as |
| * well as in the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * . Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following Disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * . Neither the name of Agere Systems Inc. nor the names of the contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * Disclaimer |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY |
| * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN |
| * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| */ |
| |
| #include "et131x_version.h" |
| #include "et131x_defs.h" |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/sched.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/interrupt.h> |
| #include <linux/in.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/bitops.h> |
| #include <asm/system.h> |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/ioport.h> |
| |
| #include "et1310_phy.h" |
| #include "et1310_pm.h" |
| #include "et1310_jagcore.h" |
| |
| #include "et131x_adapter.h" |
| #include "et131x_initpci.h" |
| #include "et131x_isr.h" |
| |
| #include "et1310_tx.h" |
| |
| |
| static void et131x_update_tcb_list(struct et131x_adapter *etdev); |
| static void et131x_check_send_wait_list(struct et131x_adapter *etdev); |
| static inline void et131x_free_send_packet(struct et131x_adapter *etdev, |
| PMP_TCB pMpTcb); |
| static int et131x_send_packet(struct sk_buff *skb, |
| struct et131x_adapter *etdev); |
| static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb); |
| |
| /** |
| * et131x_tx_dma_memory_alloc |
| * @adapter: pointer to our private adapter structure |
| * |
| * Returns 0 on success and errno on failure (as defined in errno.h). |
| * |
| * Allocates memory that will be visible both to the device and to the CPU. |
| * The OS will pass us packets, pointers to which we will insert in the Tx |
| * Descriptor queue. The device will read this queue to find the packets in |
| * memory. The device will update the "status" in memory each time it xmits a |
| * packet. |
| */ |
| int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) |
| { |
| int desc_size = 0; |
| TX_RING_t *tx_ring = &adapter->TxRing; |
| |
| /* Allocate memory for the TCB's (Transmit Control Block) */ |
| adapter->TxRing.MpTcbMem = (MP_TCB *)kcalloc(NUM_TCB, sizeof(MP_TCB), |
| GFP_ATOMIC | GFP_DMA); |
| if (!adapter->TxRing.MpTcbMem) { |
| dev_err(&adapter->pdev->dev, "Cannot alloc memory for TCBs\n"); |
| return -ENOMEM; |
| } |
| |
| /* Allocate enough memory for the Tx descriptor ring, and allocate |
| * some extra so that the ring can be aligned on a 4k boundary. |
| */ |
| desc_size = (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1; |
| tx_ring->pTxDescRingVa = |
| (PTX_DESC_ENTRY_t) pci_alloc_consistent(adapter->pdev, desc_size, |
| &tx_ring->pTxDescRingPa); |
| if (!adapter->TxRing.pTxDescRingVa) { |
| dev_err(&adapter->pdev->dev, "Cannot alloc memory for Tx Ring\n"); |
| return -ENOMEM; |
| } |
| |
| /* Save physical address |
| * |
| * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, |
| * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses |
| * are ever returned, make sure the high part is retrieved here before |
| * storing the adjusted address. |
| */ |
| tx_ring->pTxDescRingAdjustedPa = tx_ring->pTxDescRingPa; |
| |
| /* Align Tx Descriptor Ring on a 4k (0x1000) byte boundary */ |
| et131x_align_allocated_memory(adapter, |
| &tx_ring->pTxDescRingAdjustedPa, |
| &tx_ring->TxDescOffset, 0x0FFF); |
| |
| tx_ring->pTxDescRingVa += tx_ring->TxDescOffset; |
| |
| /* Allocate memory for the Tx status block */ |
| tx_ring->pTxStatusVa = pci_alloc_consistent(adapter->pdev, |
| sizeof(TX_STATUS_BLOCK_t), |
| &tx_ring->pTxStatusPa); |
| if (!adapter->TxRing.pTxStatusPa) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Tx status block\n"); |
| return -ENOMEM; |
| } |
| |
| /* Allocate memory for a dummy buffer */ |
| tx_ring->pTxDummyBlkVa = pci_alloc_consistent(adapter->pdev, |
| NIC_MIN_PACKET_SIZE, |
| &tx_ring->pTxDummyBlkPa); |
| if (!adapter->TxRing.pTxDummyBlkPa) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Tx dummy buffer\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * et131x_tx_dma_memory_free - Free all memory allocated within this module |
| * @adapter: pointer to our private adapter structure |
| * |
| * Returns 0 on success and errno on failure (as defined in errno.h). |
| */ |
| void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) |
| { |
| int desc_size = 0; |
| |
| if (adapter->TxRing.pTxDescRingVa) { |
| /* Free memory relating to Tx rings here */ |
| adapter->TxRing.pTxDescRingVa -= adapter->TxRing.TxDescOffset; |
| |
| desc_size = |
| (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1; |
| |
| pci_free_consistent(adapter->pdev, |
| desc_size, |
| adapter->TxRing.pTxDescRingVa, |
| adapter->TxRing.pTxDescRingPa); |
| |
| adapter->TxRing.pTxDescRingVa = NULL; |
| } |
| |
| /* Free memory for the Tx status block */ |
| if (adapter->TxRing.pTxStatusVa) { |
| pci_free_consistent(adapter->pdev, |
| sizeof(TX_STATUS_BLOCK_t), |
| adapter->TxRing.pTxStatusVa, |
| adapter->TxRing.pTxStatusPa); |
| |
| adapter->TxRing.pTxStatusVa = NULL; |
| } |
| |
| /* Free memory for the dummy buffer */ |
| if (adapter->TxRing.pTxDummyBlkVa) { |
| pci_free_consistent(adapter->pdev, |
| NIC_MIN_PACKET_SIZE, |
| adapter->TxRing.pTxDummyBlkVa, |
| adapter->TxRing.pTxDummyBlkPa); |
| |
| adapter->TxRing.pTxDummyBlkVa = NULL; |
| } |
| |
| /* Free the memory for MP_TCB structures */ |
| kfree(adapter->TxRing.MpTcbMem); |
| } |
| |
| /** |
| * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore. |
| * @etdev: pointer to our private adapter structure |
| */ |
| void ConfigTxDmaRegs(struct et131x_adapter *etdev) |
| { |
| struct _TXDMA_t __iomem *txdma = &etdev->regs->txdma; |
| |
| /* Load the hardware with the start of the transmit descriptor ring. */ |
| writel((uint32_t) (etdev->TxRing.pTxDescRingAdjustedPa >> 32), |
| &txdma->pr_base_hi); |
| writel((uint32_t) etdev->TxRing.pTxDescRingAdjustedPa, |
| &txdma->pr_base_lo); |
| |
| /* Initialise the transmit DMA engine */ |
| writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des.value); |
| |
| /* Load the completion writeback physical address |
| * |
| * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, |
| * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses |
| * are ever returned, make sure the high part is retrieved here before |
| * storing the adjusted address. |
| */ |
| writel(0, &txdma->dma_wb_base_hi); |
| writel(etdev->TxRing.pTxStatusPa, &txdma->dma_wb_base_lo); |
| |
| memset(etdev->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); |
| |
| writel(0, &txdma->service_request); |
| etdev->TxRing.txDmaReadyToSend = 0; |
| } |
| |
| /** |
| * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 |
| * @etdev: pointer to our adapter structure |
| */ |
| void et131x_tx_dma_disable(struct et131x_adapter *etdev) |
| { |
| /* Setup the tramsmit dma configuration register */ |
| writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT, |
| &etdev->regs->txdma.csr); |
| } |
| |
| /** |
| * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. |
| * @etdev: pointer to our adapter structure |
| * |
| * Mainly used after a return to the D0 (full-power) state from a lower state. |
| */ |
| void et131x_tx_dma_enable(struct et131x_adapter *etdev) |
| { |
| u32 csr = ET_TXDMA_SNGL_EPKT; |
| if (etdev->RegistryPhyLoopbk) |
| /* TxDMA is disabled for loopback operation. */ |
| csr |= ET_TXDMA_CSR_HALT; |
| else |
| /* Setup the transmit dma configuration register for normal |
| * operation |
| */ |
| csr |= PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT; |
| writel(csr, &etdev->regs->txdma.csr); |
| } |
| |
| /** |
| * et131x_init_send - Initialize send data structures |
| * @adapter: pointer to our private adapter structure |
| */ |
| void et131x_init_send(struct et131x_adapter *adapter) |
| { |
| PMP_TCB pMpTcb; |
| uint32_t TcbCount; |
| TX_RING_t *tx_ring; |
| |
| /* Setup some convenience pointers */ |
| tx_ring = &adapter->TxRing; |
| pMpTcb = adapter->TxRing.MpTcbMem; |
| |
| tx_ring->TCBReadyQueueHead = pMpTcb; |
| |
| /* Go through and set up each TCB */ |
| for (TcbCount = 0; TcbCount < NUM_TCB; TcbCount++) { |
| memset(pMpTcb, 0, sizeof(MP_TCB)); |
| |
| /* Set the link pointer in HW TCB to the next TCB in the |
| * chain. If this is the last TCB in the chain, also set the |
| * tail pointer. |
| */ |
| if (TcbCount < NUM_TCB - 1) { |
| pMpTcb->Next = pMpTcb + 1; |
| } else { |
| tx_ring->TCBReadyQueueTail = pMpTcb; |
| pMpTcb->Next = (PMP_TCB) NULL; |
| } |
| |
| pMpTcb++; |
| } |
| |
| /* Curr send queue should now be empty */ |
| tx_ring->CurrSendHead = (PMP_TCB) NULL; |
| tx_ring->CurrSendTail = (PMP_TCB) NULL; |
| |
| INIT_LIST_HEAD(&adapter->TxRing.SendWaitQueue); |
| } |
| |
| /** |
| * et131x_send_packets - This function is called by the OS to send packets |
| * @skb: the packet(s) to send |
| * @netdev:device on which to TX the above packet(s) |
| * |
| * Return 0 in almost all cases; non-zero value in extreme hard failure only |
| */ |
| int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) |
| { |
| int status = 0; |
| struct et131x_adapter *etdev = NULL; |
| |
| etdev = netdev_priv(netdev); |
| |
| /* Send these packets |
| * |
| * NOTE: The Linux Tx entry point is only given one packet at a time |
| * to Tx, so the PacketCount and it's array used makes no sense here |
| */ |
| |
| /* Queue is not empty or TCB is not available */ |
| if (!list_empty(&etdev->TxRing.SendWaitQueue) || |
| MP_TCB_RESOURCES_NOT_AVAILABLE(etdev)) { |
| /* NOTE: If there's an error on send, no need to queue the |
| * packet under Linux; if we just send an error up to the |
| * netif layer, it will resend the skb to us. |
| */ |
| status = -ENOMEM; |
| } else { |
| /* We need to see if the link is up; if it's not, make the |
| * netif layer think we're good and drop the packet |
| */ |
| /* |
| * if( MP_SHOULD_FAIL_SEND( etdev ) || |
| * etdev->DriverNoPhyAccess ) |
| */ |
| if (MP_SHOULD_FAIL_SEND(etdev) || etdev->DriverNoPhyAccess |
| || !netif_carrier_ok(netdev)) { |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| |
| etdev->net_stats.tx_dropped++; |
| } else { |
| status = et131x_send_packet(skb, etdev); |
| |
| if (status == -ENOMEM) { |
| |
| /* NOTE: If there's an error on send, no need |
| * to queue the packet under Linux; if we just |
| * send an error up to the netif layer, it |
| * will resend the skb to us. |
| */ |
| } else if (status != 0) { |
| /* On any other error, make netif think we're |
| * OK and drop the packet |
| */ |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| etdev->net_stats.tx_dropped++; |
| } |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * et131x_send_packet - Do the work to send a packet |
| * @skb: the packet(s) to send |
| * @etdev: a pointer to the device's private adapter structure |
| * |
| * Return 0 in almost all cases; non-zero value in extreme hard failure only. |
| * |
| * Assumption: Send spinlock has been acquired |
| */ |
| static int et131x_send_packet(struct sk_buff *skb, |
| struct et131x_adapter *etdev) |
| { |
| int status = 0; |
| PMP_TCB pMpTcb = NULL; |
| uint16_t *shbufva; |
| unsigned long flags; |
| |
| /* All packets must have at least a MAC address and a protocol type */ |
| if (skb->len < ETH_HLEN) { |
| return -EIO; |
| } |
| |
| /* Get a TCB for this packet */ |
| spin_lock_irqsave(&etdev->TCBReadyQLock, flags); |
| |
| pMpTcb = etdev->TxRing.TCBReadyQueueHead; |
| |
| if (pMpTcb == NULL) { |
| spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); |
| return -ENOMEM; |
| } |
| |
| etdev->TxRing.TCBReadyQueueHead = pMpTcb->Next; |
| |
| if (etdev->TxRing.TCBReadyQueueHead == NULL) |
| etdev->TxRing.TCBReadyQueueTail = NULL; |
| |
| spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); |
| |
| pMpTcb->PacketLength = skb->len; |
| pMpTcb->Packet = skb; |
| |
| if ((skb->data != NULL) && ((skb->len - skb->data_len) >= 6)) { |
| shbufva = (uint16_t *) skb->data; |
| |
| if ((shbufva[0] == 0xffff) && |
| (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) { |
| pMpTcb->Flags |= fMP_DEST_BROAD; |
| } else if ((shbufva[0] & 0x3) == 0x0001) { |
| pMpTcb->Flags |= fMP_DEST_MULTI; |
| } |
| } |
| |
| pMpTcb->Next = NULL; |
| |
| /* Call the NIC specific send handler. */ |
| if (status == 0) |
| status = nic_send_packet(etdev, pMpTcb); |
| |
| if (status != 0) { |
| spin_lock_irqsave(&etdev->TCBReadyQLock, flags); |
| |
| if (etdev->TxRing.TCBReadyQueueTail) { |
| etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; |
| } else { |
| /* Apparently ready Q is empty. */ |
| etdev->TxRing.TCBReadyQueueHead = pMpTcb; |
| } |
| |
| etdev->TxRing.TCBReadyQueueTail = pMpTcb; |
| spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); |
| return status; |
| } |
| WARN_ON(etdev->TxRing.nBusySend > NUM_TCB); |
| return 0; |
| } |
| |
| /** |
| * nic_send_packet - NIC specific send handler for version B silicon. |
| * @etdev: pointer to our adapter |
| * @pMpTcb: pointer to MP_TCB |
| * |
| * Returns 0 or errno. |
| */ |
| static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb) |
| { |
| uint32_t loopIndex; |
| TX_DESC_ENTRY_t CurDesc[24]; |
| uint32_t FragmentNumber = 0; |
| uint32_t thiscopy, remainder; |
| struct sk_buff *pPacket = pMpTcb->Packet; |
| uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1; |
| struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0]; |
| unsigned long flags; |
| |
| /* Part of the optimizations of this send routine restrict us to |
| * sending 24 fragments at a pass. In practice we should never see |
| * more than 5 fragments. |
| * |
| * NOTE: The older version of this function (below) can handle any |
| * number of fragments. If needed, we can call this function, |
| * although it is less efficient. |
| */ |
| if (FragListCount > 23) { |
| return -EIO; |
| } |
| |
| memset(CurDesc, 0, sizeof(TX_DESC_ENTRY_t) * (FragListCount + 1)); |
| |
| for (loopIndex = 0; loopIndex < FragListCount; loopIndex++) { |
| /* If there is something in this element, lets get a |
| * descriptor from the ring and get the necessary data |
| */ |
| if (loopIndex == 0) { |
| /* If the fragments are smaller than a standard MTU, |
| * then map them to a single descriptor in the Tx |
| * Desc ring. However, if they're larger, as is |
| * possible with support for jumbo packets, then |
| * split them each across 2 descriptors. |
| * |
| * This will work until we determine why the hardware |
| * doesn't seem to like large fragments. |
| */ |
| if ((pPacket->len - pPacket->data_len) <= 1514) { |
| CurDesc[FragmentNumber].DataBufferPtrHigh = 0; |
| CurDesc[FragmentNumber].word2.bits. |
| length_in_bytes = |
| pPacket->len - pPacket->data_len; |
| |
| /* NOTE: Here, the dma_addr_t returned from |
| * pci_map_single() is implicitly cast as a |
| * uint32_t. Although dma_addr_t can be |
| * 64-bit, the address returned by |
| * pci_map_single() is always 32-bit |
| * addressable (as defined by the pci/dma |
| * subsystem) |
| */ |
| CurDesc[FragmentNumber++].DataBufferPtrLow = |
| pci_map_single(etdev->pdev, |
| pPacket->data, |
| pPacket->len - |
| pPacket->data_len, |
| PCI_DMA_TODEVICE); |
| } else { |
| CurDesc[FragmentNumber].DataBufferPtrHigh = 0; |
| CurDesc[FragmentNumber].word2.bits. |
| length_in_bytes = |
| ((pPacket->len - pPacket->data_len) / 2); |
| |
| /* NOTE: Here, the dma_addr_t returned from |
| * pci_map_single() is implicitly cast as a |
| * uint32_t. Although dma_addr_t can be |
| * 64-bit, the address returned by |
| * pci_map_single() is always 32-bit |
| * addressable (as defined by the pci/dma |
| * subsystem) |
| */ |
| CurDesc[FragmentNumber++].DataBufferPtrLow = |
| pci_map_single(etdev->pdev, |
| pPacket->data, |
| ((pPacket->len - |
| pPacket->data_len) / 2), |
| PCI_DMA_TODEVICE); |
| CurDesc[FragmentNumber].DataBufferPtrHigh = 0; |
| |
| CurDesc[FragmentNumber].word2.bits. |
| length_in_bytes = |
| ((pPacket->len - pPacket->data_len) / 2); |
| |
| /* NOTE: Here, the dma_addr_t returned from |
| * pci_map_single() is implicitly cast as a |
| * uint32_t. Although dma_addr_t can be |
| * 64-bit, the address returned by |
| * pci_map_single() is always 32-bit |
| * addressable (as defined by the pci/dma |
| * subsystem) |
| */ |
| CurDesc[FragmentNumber++].DataBufferPtrLow = |
| pci_map_single(etdev->pdev, |
| pPacket->data + |
| ((pPacket->len - |
| pPacket->data_len) / 2), |
| ((pPacket->len - |
| pPacket->data_len) / 2), |
| PCI_DMA_TODEVICE); |
| } |
| } else { |
| CurDesc[FragmentNumber].DataBufferPtrHigh = 0; |
| CurDesc[FragmentNumber].word2.bits.length_in_bytes = |
| pFragList[loopIndex - 1].size; |
| |
| /* NOTE: Here, the dma_addr_t returned from |
| * pci_map_page() is implicitly cast as a uint32_t. |
| * Although dma_addr_t can be 64-bit, the address |
| * returned by pci_map_page() is always 32-bit |
| * addressable (as defined by the pci/dma subsystem) |
| */ |
| CurDesc[FragmentNumber++].DataBufferPtrLow = |
| pci_map_page(etdev->pdev, |
| pFragList[loopIndex - 1].page, |
| pFragList[loopIndex - 1].page_offset, |
| pFragList[loopIndex - 1].size, |
| PCI_DMA_TODEVICE); |
| } |
| } |
| |
| if (FragmentNumber == 0) |
| return -EIO; |
| |
| if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { |
| if (++etdev->TxRing.TxPacketsSinceLastinterrupt == |
| PARM_TX_NUM_BUFS_DEF) { |
| CurDesc[FragmentNumber - 1].word3.value = 0x5; |
| etdev->TxRing.TxPacketsSinceLastinterrupt = 0; |
| } else { |
| CurDesc[FragmentNumber - 1].word3.value = 0x1; |
| } |
| } else { |
| CurDesc[FragmentNumber - 1].word3.value = 0x5; |
| } |
| |
| CurDesc[0].word3.bits.f = 1; |
| |
| pMpTcb->WrIndexStart = etdev->TxRing.txDmaReadyToSend; |
| pMpTcb->PacketStaleCount = 0; |
| |
| spin_lock_irqsave(&etdev->SendHWLock, flags); |
| |
| thiscopy = NUM_DESC_PER_RING_TX - |
| INDEX10(etdev->TxRing.txDmaReadyToSend); |
| |
| if (thiscopy >= FragmentNumber) { |
| remainder = 0; |
| thiscopy = FragmentNumber; |
| } else { |
| remainder = FragmentNumber - thiscopy; |
| } |
| |
| memcpy(etdev->TxRing.pTxDescRingVa + |
| INDEX10(etdev->TxRing.txDmaReadyToSend), CurDesc, |
| sizeof(TX_DESC_ENTRY_t) * thiscopy); |
| |
| add_10bit(&etdev->TxRing.txDmaReadyToSend, thiscopy); |
| |
| if (INDEX10(etdev->TxRing.txDmaReadyToSend)== 0 || |
| INDEX10(etdev->TxRing.txDmaReadyToSend) == NUM_DESC_PER_RING_TX) { |
| etdev->TxRing.txDmaReadyToSend &= ~ET_DMA10_MASK; |
| etdev->TxRing.txDmaReadyToSend ^= ET_DMA10_WRAP; |
| } |
| |
| if (remainder) { |
| memcpy(etdev->TxRing.pTxDescRingVa, |
| CurDesc + thiscopy, |
| sizeof(TX_DESC_ENTRY_t) * remainder); |
| |
| add_10bit(&etdev->TxRing.txDmaReadyToSend, remainder); |
| } |
| |
| if (INDEX10(etdev->TxRing.txDmaReadyToSend) == 0) { |
| if (etdev->TxRing.txDmaReadyToSend) |
| pMpTcb->WrIndex = NUM_DESC_PER_RING_TX - 1; |
| else |
| pMpTcb->WrIndex= ET_DMA10_WRAP | (NUM_DESC_PER_RING_TX - 1); |
| } else |
| pMpTcb->WrIndex = etdev->TxRing.txDmaReadyToSend - 1; |
| |
| spin_lock(&etdev->TCBSendQLock); |
| |
| if (etdev->TxRing.CurrSendTail) |
| etdev->TxRing.CurrSendTail->Next = pMpTcb; |
| else |
| etdev->TxRing.CurrSendHead = pMpTcb; |
| |
| etdev->TxRing.CurrSendTail = pMpTcb; |
| |
| WARN_ON(pMpTcb->Next != NULL); |
| |
| etdev->TxRing.nBusySend++; |
| |
| spin_unlock(&etdev->TCBSendQLock); |
| |
| /* Write the new write pointer back to the device. */ |
| writel(etdev->TxRing.txDmaReadyToSend, |
| &etdev->regs->txdma.service_request); |
| |
| /* For Gig only, we use Tx Interrupt coalescing. Enable the software |
| * timer to wake us up if this packet isn't followed by N more. |
| */ |
| if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { |
| writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, |
| &etdev->regs->global.watchdog_timer); |
| } |
| spin_unlock_irqrestore(&etdev->SendHWLock, flags); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary |
| * @etdev: pointer to our adapter |
| * @pMpTcb: pointer to MP_TCB |
| * |
| * Assumption - Send spinlock has been acquired |
| */ |
| inline void et131x_free_send_packet(struct et131x_adapter *etdev, |
| PMP_TCB pMpTcb) |
| { |
| unsigned long flags; |
| TX_DESC_ENTRY_t *desc = NULL; |
| struct net_device_stats *stats = &etdev->net_stats; |
| |
| if (pMpTcb->Flags & fMP_DEST_BROAD) |
| atomic_inc(&etdev->Stats.brdcstxmt); |
| else if (pMpTcb->Flags & fMP_DEST_MULTI) |
| atomic_inc(&etdev->Stats.multixmt); |
| else |
| atomic_inc(&etdev->Stats.unixmt); |
| |
| if (pMpTcb->Packet) { |
| stats->tx_bytes += pMpTcb->Packet->len; |
| |
| /* Iterate through the TX descriptors on the ring |
| * corresponding to this packet and umap the fragments |
| * they point to |
| */ |
| do { |
| desc = |
| (TX_DESC_ENTRY_t *) (etdev->TxRing.pTxDescRingVa + |
| INDEX10(pMpTcb->WrIndexStart)); |
| |
| pci_unmap_single(etdev->pdev, |
| desc->DataBufferPtrLow, |
| desc->word2.value, PCI_DMA_TODEVICE); |
| |
| add_10bit(&pMpTcb->WrIndexStart, 1); |
| if (INDEX10(pMpTcb->WrIndexStart) >= |
| NUM_DESC_PER_RING_TX) { |
| pMpTcb->WrIndexStart &= ~ET_DMA10_MASK; |
| pMpTcb->WrIndexStart ^= ET_DMA10_WRAP; |
| } |
| } while (desc != (etdev->TxRing.pTxDescRingVa + |
| INDEX10(pMpTcb->WrIndex))); |
| |
| dev_kfree_skb_any(pMpTcb->Packet); |
| } |
| |
| memset(pMpTcb, 0, sizeof(MP_TCB)); |
| |
| /* Add the TCB to the Ready Q */ |
| spin_lock_irqsave(&etdev->TCBReadyQLock, flags); |
| |
| etdev->Stats.opackets++; |
| |
| if (etdev->TxRing.TCBReadyQueueTail) { |
| etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; |
| } else { |
| /* Apparently ready Q is empty. */ |
| etdev->TxRing.TCBReadyQueueHead = pMpTcb; |
| } |
| |
| etdev->TxRing.TCBReadyQueueTail = pMpTcb; |
| |
| spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); |
| WARN_ON(etdev->TxRing.nBusySend < 0); |
| } |
| |
| /** |
| * et131x_free_busy_send_packets - Free and complete the stopped active sends |
| * @etdev: pointer to our adapter |
| * |
| * Assumption - Send spinlock has been acquired |
| */ |
| void et131x_free_busy_send_packets(struct et131x_adapter *etdev) |
| { |
| PMP_TCB pMpTcb; |
| struct list_head *entry; |
| unsigned long flags; |
| uint32_t FreeCounter = 0; |
| |
| while (!list_empty(&etdev->TxRing.SendWaitQueue)) { |
| spin_lock_irqsave(&etdev->SendWaitLock, flags); |
| |
| etdev->TxRing.nWaitSend--; |
| spin_unlock_irqrestore(&etdev->SendWaitLock, flags); |
| |
| entry = etdev->TxRing.SendWaitQueue.next; |
| } |
| |
| etdev->TxRing.nWaitSend = 0; |
| |
| /* Any packets being sent? Check the first TCB on the send list */ |
| spin_lock_irqsave(&etdev->TCBSendQLock, flags); |
| |
| pMpTcb = etdev->TxRing.CurrSendHead; |
| |
| while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) { |
| PMP_TCB pNext = pMpTcb->Next; |
| |
| etdev->TxRing.CurrSendHead = pNext; |
| |
| if (pNext == NULL) |
| etdev->TxRing.CurrSendTail = NULL; |
| |
| etdev->TxRing.nBusySend--; |
| |
| spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); |
| |
| FreeCounter++; |
| et131x_free_send_packet(etdev, pMpTcb); |
| |
| spin_lock_irqsave(&etdev->TCBSendQLock, flags); |
| |
| pMpTcb = etdev->TxRing.CurrSendHead; |
| } |
| |
| WARN_ON(FreeCounter == NUM_TCB); |
| |
| spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); |
| |
| etdev->TxRing.nBusySend = 0; |
| } |
| |
| /** |
| * et131x_handle_send_interrupt - Interrupt handler for sending processing |
| * @etdev: pointer to our adapter |
| * |
| * Re-claim the send resources, complete sends and get more to send from |
| * the send wait queue. |
| * |
| * Assumption - Send spinlock has been acquired |
| */ |
| void et131x_handle_send_interrupt(struct et131x_adapter *etdev) |
| { |
| /* Mark as completed any packets which have been sent by the device. */ |
| et131x_update_tcb_list(etdev); |
| |
| /* If we queued any transmits because we didn't have any TCBs earlier, |
| * dequeue and send those packets now, as long as we have free TCBs. |
| */ |
| et131x_check_send_wait_list(etdev); |
| } |
| |
| /** |
| * et131x_update_tcb_list - Helper routine for Send Interrupt handler |
| * @etdev: pointer to our adapter |
| * |
| * Re-claims the send resources and completes sends. Can also be called as |
| * part of the NIC send routine when the "ServiceComplete" indication has |
| * wrapped. |
| */ |
| static void et131x_update_tcb_list(struct et131x_adapter *etdev) |
| { |
| unsigned long flags; |
| u32 ServiceComplete; |
| PMP_TCB pMpTcb; |
| u32 index; |
| |
| ServiceComplete = readl(&etdev->regs->txdma.NewServiceComplete); |
| index = INDEX10(ServiceComplete); |
| |
| /* Has the ring wrapped? Process any descriptors that do not have |
| * the same "wrap" indicator as the current completion indicator |
| */ |
| spin_lock_irqsave(&etdev->TCBSendQLock, flags); |
| |
| pMpTcb = etdev->TxRing.CurrSendHead; |
| |
| while (pMpTcb && |
| ((ServiceComplete ^ pMpTcb->WrIndex) & ET_DMA10_WRAP) && |
| index < INDEX10(pMpTcb->WrIndex)) { |
| etdev->TxRing.nBusySend--; |
| etdev->TxRing.CurrSendHead = pMpTcb->Next; |
| if (pMpTcb->Next == NULL) |
| etdev->TxRing.CurrSendTail = NULL; |
| |
| spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); |
| et131x_free_send_packet(etdev, pMpTcb); |
| spin_lock_irqsave(&etdev->TCBSendQLock, flags); |
| |
| /* Goto the next packet */ |
| pMpTcb = etdev->TxRing.CurrSendHead; |
| } |
| while (pMpTcb && |
| !((ServiceComplete ^ pMpTcb->WrIndex) & ET_DMA10_WRAP) |
| && index > (pMpTcb->WrIndex & ET_DMA10_MASK)) { |
| etdev->TxRing.nBusySend--; |
| etdev->TxRing.CurrSendHead = pMpTcb->Next; |
| if (pMpTcb->Next == NULL) |
| etdev->TxRing.CurrSendTail = NULL; |
| |
| spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); |
| et131x_free_send_packet(etdev, pMpTcb); |
| spin_lock_irqsave(&etdev->TCBSendQLock, flags); |
| |
| /* Goto the next packet */ |
| pMpTcb = etdev->TxRing.CurrSendHead; |
| } |
| |
| /* Wake up the queue when we hit a low-water mark */ |
| if (etdev->TxRing.nBusySend <= (NUM_TCB / 3)) |
| netif_wake_queue(etdev->netdev); |
| |
| spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); |
| } |
| |
| /** |
| * et131x_check_send_wait_list - Helper routine for the interrupt handler |
| * @etdev: pointer to our adapter |
| * |
| * Takes packets from the send wait queue and posts them to the device (if |
| * room available). |
| */ |
| static void et131x_check_send_wait_list(struct et131x_adapter *etdev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&etdev->SendWaitLock, flags); |
| |
| while (!list_empty(&etdev->TxRing.SendWaitQueue) && |
| MP_TCB_RESOURCES_AVAILABLE(etdev)) { |
| struct list_head *entry; |
| |
| entry = etdev->TxRing.SendWaitQueue.next; |
| |
| etdev->TxRing.nWaitSend--; |
| } |
| |
| spin_unlock_irqrestore(&etdev->SendWaitLock, flags); |
| } |