blob: 43cc68bd3192620b90bd3b2e16105263bfffcc73 [file] [log] [blame]
/*
* Device Tree Source for AMCC Sequoia
*
* Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
* Copyright (c) 2006, 2007 IBM Corp.
*
* FIXME: Draft only!
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,sequoia";
compatible = "amcc,sequoia";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
ethernet1 = &EMAC1;
serial0 = &UART0;
serial1 = &UART1;
serial2 = &UART2;
serial3 = &UART3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EPx";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
dcr-reg = <0x00c 0x002>;
};
plb {
compatible = "ibm,plb-440epx", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; /* Filled in by zImage */
SDRAM0: sdram {
compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440epx", "ibm,dma-4xx";
dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
/*RXEOB*/ 0x1 &UIC0 0xb 0x4
/*SERR*/ 0x2 &UIC1 0x0 0x4
/*TXDE*/ 0x3 &UIC1 0x1 0x4
/*RXDE*/ 0x4 &UIC1 0x2 0x4>;
interrupt-map-mask = <0xffffffff>;
};
USB1: usb@e0000400 {
compatible = "ibm,usb-ohci-440epx", "ohci-be";
reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
interrupts = <0x15 0x8>;
};
USB0: ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 0x4>;
reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
big-endian;
};
POB0: opb {
compatible = "ibm,opb-440epx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000001 0x00000000 0x80000000
0x80000000 0x00000001 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440epx", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Kernel";
reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "ramdisk";
reg = <0x00180000 0x00200000>;
};
partition@380000 {
label = "file system";
reg = <0x00380000 0x03aa0000>;
};
partition@3e20000 {
label = "kozio";
reg = <0x03e20000 0x00140000>;
};
partition@3f60000 {
label = "env";
reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600300 0x00000008>;
virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
current-speed = <115200>;
interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600400 0x00000008>;
virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600500 0x00000008>;
virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600600 0x00000008>;
virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ibm,iic-440epx", "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
hwmon@48 {
compatible = "adi,ad7414";
reg = <0x48>;
};
};
IIC1: i2c@ef600800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ibm,iic-440epx", "ibm,iic";
reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440epx", "ibm,zmii";
reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440epx", "ibm,rgmii";
reg = <0xef601000 0x00000008>;
has-mdio;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
/*Wake*/ 0x1 &UIC1 0x1d 0x4>;
reg = <0xef600e00 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
EMAC1: ethernet@ef600f00 {
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
/*Wake*/ 0x1 &UIC1 0x1f 0x4>;
reg = <0xef600f00 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCI0: pci@1ec000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
primary;
reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */
0x00000001 0xeed00000 0x00000004 /* IACK */
0x00000001 0xeed00000 0x00000004 /* Special cycle */
0x00000001 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
* From the 440EPx user manual:
* PCI 1 Memory 1 8000 0000 1 BFFF FFFF 1GB
* I/O 1 E800 0000 1 E800 FFFF 64KB
* I/O 1 E880 0000 1 EBFF FFFF 56MB
*/
ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* All PCI interrupts are routed to IRQ 67 */
interrupt-map-mask = <0x0 0x0 0x0 0x0>;
interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@ef600300";
bootargs = "console=ttyS0,115200";
};
};