| /* |
| * Copyright (c) 2000-2009 LSI Corporation. |
| * |
| * |
| * Name: mpi2_cnfg.h |
| * Title: MPI Configuration messages and pages |
| * Creation Date: November 10, 2006 |
| * |
| * mpi2_cnfg.h Version: 02.00.10 |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. |
| * Added Manufacturing Page 11. |
| * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE |
| * define. |
| * 06-26-07 02.00.02 Adding generic structure for product-specific |
| * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. |
| * Rework of BIOS Page 2 configuration page. |
| * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the |
| * forms. |
| * Added configuration pages IOC Page 8 and Driver |
| * Persistent Mapping Page 0. |
| * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated |
| * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, |
| * RAID Physical Disk Pages 0 and 1, RAID Configuration |
| * Page 0). |
| * Added new value for AccessStatus field of SAS Device |
| * Page 0 (_SATA_NEEDS_INITIALIZATION). |
| * 10-31-07 02.00.04 Added missing SEPDevHandle field to |
| * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. |
| * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for |
| * NVDATA. |
| * Modified IOC Page 7 to use masks and added field for |
| * SASBroadcastPrimitiveMasks. |
| * Added MPI2_CONFIG_PAGE_BIOS_4. |
| * Added MPI2_CONFIG_PAGE_LOG_0. |
| * 02-29-08 02.00.06 Modified various names to make them 32-character unique. |
| * Added SAS Device IDs. |
| * Updated Integrated RAID configuration pages including |
| * Manufacturing Page 4, IOC Page 6, and RAID Configuration |
| * Page 0. |
| * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. |
| * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. |
| * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. |
| * Added missing MaxNumRoutedSasAddresses field to |
| * MPI2_CONFIG_PAGE_EXPANDER_0. |
| * Added SAS Port Page 0. |
| * Modified structure layout for |
| * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. |
| * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use |
| * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. |
| * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF |
| * to 0x000000FF. |
| * Added two new values for the Physical Disk Coercion Size |
| * bits in the Flags field of Manufacturing Page 4. |
| * Added product-specific Manufacturing pages 16 to 31. |
| * Modified Flags bits for controlling write cache on SATA |
| * drives in IO Unit Page 1. |
| * Added new bit to AdditionalControlFlags of SAS IO Unit |
| * Page 1 to control Invalid Topology Correction. |
| * Added additional defines for RAID Volume Page 0 |
| * VolumeStatusFlags field. |
| * Modified meaning of RAID Volume Page 0 VolumeSettings |
| * define for auto-configure of hot-swap drives. |
| * Added SupportedPhysDisks field to RAID Volume Page 1 and |
| * added related defines. |
| * Added PhysDiskAttributes field (and related defines) to |
| * RAID Physical Disk Page 0. |
| * Added MPI2_SAS_PHYINFO_PHY_VACANT define. |
| * Added three new DiscoveryStatus bits for SAS IO Unit |
| * Page 0 and SAS Expander Page 0. |
| * Removed multiplexing information from SAS IO Unit pages. |
| * Added BootDeviceWaitTime field to SAS IO Unit Page 4. |
| * Removed Zone Address Resolved bit from PhyInfo and from |
| * Expander Page 0 Flags field. |
| * Added two new AccessStatus values to SAS Device Page 0 |
| * for indicating routing problems. Added 3 reserved words |
| * to this page. |
| * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. |
| * Inserted missing reserved field into structure for IOC |
| * Page 6. |
| * Added more pending task bits to RAID Volume Page 0 |
| * VolumeStatusFlags defines. |
| * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. |
| * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 |
| * and SAS Expander Page 0 to flag a downstream initiator |
| * when in simplified routing mode. |
| * Removed SATA Init Failure defines for DiscoveryStatus |
| * fields of SAS IO Unit Page 0 and SAS Expander Page 0. |
| * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. |
| * Added PortGroups, DmaGroup, and ControlGroup fields to |
| * SAS Device Page 0. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI2_CNFG_H |
| #define MPI2_CNFG_H |
| |
| /***************************************************************************** |
| * Configuration Page Header and defines |
| *****************************************************************************/ |
| |
| /* Config Page Header */ |
| typedef struct _MPI2_CONFIG_PAGE_HEADER |
| { |
| U8 PageVersion; /* 0x00 */ |
| U8 PageLength; /* 0x01 */ |
| U8 PageNumber; /* 0x02 */ |
| U8 PageType; /* 0x03 */ |
| } MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, |
| Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; |
| |
| typedef union _MPI2_CONFIG_PAGE_HEADER_UNION |
| { |
| MPI2_CONFIG_PAGE_HEADER Struct; |
| U8 Bytes[4]; |
| U16 Word16[2]; |
| U32 Word32; |
| } MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, |
| Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; |
| |
| /* Extended Config Page Header */ |
| typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER |
| { |
| U8 PageVersion; /* 0x00 */ |
| U8 Reserved1; /* 0x01 */ |
| U8 PageNumber; /* 0x02 */ |
| U8 PageType; /* 0x03 */ |
| U16 ExtPageLength; /* 0x04 */ |
| U8 ExtPageType; /* 0x06 */ |
| U8 Reserved2; /* 0x07 */ |
| } MPI2_CONFIG_EXTENDED_PAGE_HEADER, |
| MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, |
| Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; |
| |
| typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION |
| { |
| MPI2_CONFIG_PAGE_HEADER Struct; |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; |
| U8 Bytes[8]; |
| U16 Word16[4]; |
| U32 Word32[2]; |
| } MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, |
| Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; |
| |
| |
| /* PageType field values */ |
| #define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) |
| #define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) |
| #define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) |
| #define MPI2_CONFIG_PAGEATTR_MASK (0xF0) |
| |
| #define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) |
| #define MPI2_CONFIG_PAGETYPE_IOC (0x01) |
| #define MPI2_CONFIG_PAGETYPE_BIOS (0x02) |
| #define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) |
| #define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) |
| #define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) |
| #define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) |
| #define MPI2_CONFIG_PAGETYPE_MASK (0x0F) |
| |
| #define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) |
| |
| |
| /* ExtPageType field values */ |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) |
| #define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) |
| #define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) |
| #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) |
| #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) |
| #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) |
| |
| |
| /***************************************************************************** |
| * PageAddress defines |
| *****************************************************************************/ |
| |
| /* RAID Volume PageAddress format */ |
| #define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) |
| |
| #define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /* RAID Physical Disk PageAddress format */ |
| #define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) |
| #define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) |
| |
| #define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) |
| #define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) |
| |
| |
| /* SAS Expander PageAddress format */ |
| #define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) |
| #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) |
| |
| #define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) |
| #define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) |
| #define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) |
| |
| |
| /* SAS Device PageAddress format */ |
| #define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) |
| |
| #define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /* SAS PHY PageAddress format */ |
| #define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) |
| #define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) |
| |
| #define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) |
| #define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) |
| |
| |
| /* SAS Port PageAddress format */ |
| #define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) |
| #define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) |
| |
| #define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) |
| |
| |
| /* SAS Enclosure PageAddress format */ |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) |
| |
| #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) |
| |
| |
| /* RAID Configuration PageAddress format */ |
| #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) |
| #define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) |
| #define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) |
| |
| #define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) |
| |
| |
| /* Driver Persistent Mapping PageAddress format */ |
| #define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) |
| #define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) |
| |
| #define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) |
| #define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) |
| #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) |
| |
| |
| /**************************************************************************** |
| * Configuration messages |
| ****************************************************************************/ |
| |
| /* Configuration Request Message */ |
| typedef struct _MPI2_CONFIG_REQUEST |
| { |
| U8 Action; /* 0x00 */ |
| U8 SGLFlags; /* 0x01 */ |
| U8 ChainOffset; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U16 ExtPageLength; /* 0x04 */ |
| U8 ExtPageType; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved1; /* 0x0A */ |
| U32 Reserved2; /* 0x0C */ |
| U32 Reserved3; /* 0x10 */ |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ |
| U32 PageAddress; /* 0x18 */ |
| MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ |
| } MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, |
| Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; |
| |
| /* values for the Action field */ |
| #define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) |
| #define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) |
| #define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) |
| #define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) |
| #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) |
| #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) |
| |
| /* values for SGLFlags field are in the SGL section of mpi2.h */ |
| |
| |
| /* Config Reply Message */ |
| typedef struct _MPI2_CONFIG_REPLY |
| { |
| U8 Action; /* 0x00 */ |
| U8 SGLFlags; /* 0x01 */ |
| U8 MsgLength; /* 0x02 */ |
| U8 Function; /* 0x03 */ |
| U16 ExtPageLength; /* 0x04 */ |
| U8 ExtPageType; /* 0x06 */ |
| U8 MsgFlags; /* 0x07 */ |
| U8 VP_ID; /* 0x08 */ |
| U8 VF_ID; /* 0x09 */ |
| U16 Reserved1; /* 0x0A */ |
| U16 Reserved2; /* 0x0C */ |
| U16 IOCStatus; /* 0x0E */ |
| U32 IOCLogInfo; /* 0x10 */ |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ |
| } MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, |
| Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; |
| |
| |
| |
| /***************************************************************************** |
| * |
| * C o n f i g u r a t i o n P a g e s |
| * |
| *****************************************************************************/ |
| |
| /**************************************************************************** |
| * Manufacturing Config pages |
| ****************************************************************************/ |
| |
| #define MPI2_MFGPAGE_VENDORID_LSI (0x1000) |
| |
| /* SAS */ |
| #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) |
| #define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) |
| #define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) |
| #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) |
| #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) |
| |
| |
| /* Manufacturing Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_0 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 ChipName[16]; /* 0x04 */ |
| U8 ChipRevision[8]; /* 0x14 */ |
| U8 BoardName[16]; /* 0x1C */ |
| U8 BoardAssembly[16]; /* 0x2C */ |
| U8 BoardTracerNumber[16]; /* 0x3C */ |
| } MPI2_CONFIG_PAGE_MAN_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, |
| Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; |
| |
| #define MPI2_MANUFACTURING0_PAGEVERSION (0x00) |
| |
| |
| /* Manufacturing Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 VPD[256]; /* 0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_1, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, |
| Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; |
| |
| #define MPI2_MANUFACTURING1_PAGEVERSION (0x00) |
| |
| |
| typedef struct _MPI2_CHIP_REVISION_ID |
| { |
| U16 DeviceID; /* 0x00 */ |
| U8 PCIRevisionID; /* 0x02 */ |
| U8 Reserved; /* 0x03 */ |
| } MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, |
| Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; |
| |
| |
| /* Manufacturing Page 2 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS |
| #define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_2 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ |
| U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_2, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, |
| Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; |
| |
| #define MPI2_MANUFACTURING2_PAGEVERSION (0x00) |
| |
| |
| /* Manufacturing Page 3 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_3_INFO_WORDS |
| #define MPI2_MAN_PAGE_3_INFO_WORDS (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_3 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ |
| U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_3, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, |
| Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; |
| |
| #define MPI2_MANUFACTURING3_PAGEVERSION (0x00) |
| |
| |
| /* Manufacturing Page 4 */ |
| |
| typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS |
| { |
| U8 PowerSaveFlags; /* 0x00 */ |
| U8 InternalOperationsSleepTime; /* 0x01 */ |
| U8 InternalOperationsRunTime; /* 0x02 */ |
| U8 HostIdleTime; /* 0x03 */ |
| } MPI2_MANPAGE4_PWR_SAVE_SETTINGS, |
| MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, |
| Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; |
| |
| /* defines for the PowerSaveFlags field */ |
| #define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) |
| #define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) |
| #define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) |
| #define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_4 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x04 */ |
| U32 Flags; /* 0x08 */ |
| U8 InquirySize; /* 0x0C */ |
| U8 Reserved2; /* 0x0D */ |
| U16 Reserved3; /* 0x0E */ |
| U8 InquiryData[56]; /* 0x10 */ |
| U32 RAID0VolumeSettings; /* 0x48 */ |
| U32 RAID1EVolumeSettings; /* 0x4C */ |
| U32 RAID1VolumeSettings; /* 0x50 */ |
| U32 RAID10VolumeSettings; /* 0x54 */ |
| U32 Reserved4; /* 0x58 */ |
| U32 Reserved5; /* 0x5C */ |
| MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ |
| U8 MaxOCEDisks; /* 0x64 */ |
| U8 ResyncRate; /* 0x65 */ |
| U16 DataScrubDuration; /* 0x66 */ |
| U8 MaxHotSpares; /* 0x68 */ |
| U8 MaxPhysDisksPerVol; /* 0x69 */ |
| U8 MaxPhysDisks; /* 0x6A */ |
| U8 MaxVolumes; /* 0x6B */ |
| } MPI2_CONFIG_PAGE_MAN_4, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, |
| Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; |
| |
| #define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) |
| |
| /* Manufacturing Page 4 Flags field */ |
| #define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) |
| #define MPI2_MANPAGE4_METADATA_512MB (0x00000000) |
| |
| #define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) |
| #define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) |
| #define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) |
| |
| #define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) |
| #define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) |
| #define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) |
| #define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) |
| #define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) |
| |
| #define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) |
| #define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) |
| #define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) |
| #define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) |
| |
| #define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) |
| #define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) |
| #define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) |
| #define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) |
| #define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) |
| #define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) |
| #define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) |
| #define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) |
| |
| |
| /* Manufacturing Page 5 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES |
| #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_MANUFACTURING5_ENTRY |
| { |
| U64 WWID; /* 0x00 */ |
| U64 DeviceName; /* 0x08 */ |
| } MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, |
| Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_5 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 NumPhys; /* 0x04 */ |
| U8 Reserved1; /* 0x05 */ |
| U16 Reserved2; /* 0x06 */ |
| U32 Reserved3; /* 0x08 */ |
| U32 Reserved4; /* 0x0C */ |
| MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ |
| } MPI2_CONFIG_PAGE_MAN_5, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, |
| Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; |
| |
| #define MPI2_MANUFACTURING5_PAGEVERSION (0x03) |
| |
| |
| /* Manufacturing Page 6 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_6 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 ProductSpecificInfo;/* 0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_6, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, |
| Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; |
| |
| #define MPI2_MANUFACTURING6_PAGEVERSION (0x00) |
| |
| |
| /* Manufacturing Page 7 */ |
| |
| typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO |
| { |
| U32 Pinout; /* 0x00 */ |
| U8 Connector[16]; /* 0x04 */ |
| U8 Location; /* 0x14 */ |
| U8 Reserved1; /* 0x15 */ |
| U16 Slot; /* 0x16 */ |
| U32 Reserved2; /* 0x18 */ |
| } MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, |
| Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; |
| |
| /* defines for the Pinout field */ |
| #define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) |
| #define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) |
| #define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) |
| |
| /* defines for the Location field */ |
| #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) |
| #define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) |
| #define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) |
| #define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) |
| #define MPI2_MANPAGE7_LOCATION_AUTO (0x10) |
| #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) |
| #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check NumPhys at runtime. |
| */ |
| #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX |
| #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_7 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x04 */ |
| U32 Reserved2; /* 0x08 */ |
| U32 Flags; /* 0x0C */ |
| U8 EnclosureName[16]; /* 0x10 */ |
| U8 NumPhys; /* 0x20 */ |
| U8 Reserved3; /* 0x21 */ |
| U16 Reserved4; /* 0x22 */ |
| MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ |
| } MPI2_CONFIG_PAGE_MAN_7, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, |
| Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; |
| |
| #define MPI2_MANUFACTURING7_PAGEVERSION (0x00) |
| |
| /* defines for the Flags field */ |
| #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) |
| |
| |
| /* |
| * Generic structure to use for product-specific manufacturing pages |
| * (currently Manufacturing Page 8 through Manufacturing Page 31). |
| */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_MAN_PS |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 ProductSpecificInfo;/* 0x04 */ |
| } MPI2_CONFIG_PAGE_MAN_PS, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, |
| Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; |
| |
| #define MPI2_MANUFACTURING8_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING9_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING10_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING11_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING12_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING13_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING14_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING15_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING16_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING17_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING18_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING19_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING20_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING21_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING22_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING23_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING24_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING25_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING26_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING27_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING28_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING29_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING30_PAGEVERSION (0x00) |
| #define MPI2_MANUFACTURING31_PAGEVERSION (0x00) |
| |
| |
| /**************************************************************************** |
| * IO Unit Config Pages |
| ****************************************************************************/ |
| |
| /* IO Unit Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U64 UniqueValue; /* 0x04 */ |
| MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ |
| MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, |
| Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; |
| |
| #define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) |
| |
| |
| /* IO Unit Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Flags; /* 0x04 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, |
| Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; |
| |
| #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) |
| |
| /* IO Unit Page 1 Flags defines */ |
| #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) |
| #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) |
| #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) |
| #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) |
| #define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) |
| #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) |
| #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) |
| #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) |
| #define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) |
| #define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) |
| |
| |
| /* IO Unit Page 3 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX |
| #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 GPIOCount; /* 0x04 */ |
| U8 Reserved1; /* 0x05 */ |
| U16 Reserved2; /* 0x06 */ |
| U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ |
| } MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, |
| Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; |
| |
| #define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) |
| |
| /* defines for IO Unit Page 3 GPIOVal field */ |
| #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) |
| #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) |
| #define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) |
| #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) |
| |
| |
| /**************************************************************************** |
| * IOC Config Pages |
| ****************************************************************************/ |
| |
| /* IOC Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_0 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x04 */ |
| U32 Reserved2; /* 0x08 */ |
| U16 VendorID; /* 0x0C */ |
| U16 DeviceID; /* 0x0E */ |
| U8 RevisionID; /* 0x10 */ |
| U8 Reserved3; /* 0x11 */ |
| U16 Reserved4; /* 0x12 */ |
| U32 ClassCode; /* 0x14 */ |
| U16 SubsystemVendorID; /* 0x18 */ |
| U16 SubsystemID; /* 0x1A */ |
| } MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, |
| Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; |
| |
| #define MPI2_IOCPAGE0_PAGEVERSION (0x02) |
| |
| |
| /* IOC Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Flags; /* 0x04 */ |
| U32 CoalescingTimeout; /* 0x08 */ |
| U8 CoalescingDepth; /* 0x0C */ |
| U8 PCISlotNum; /* 0x0D */ |
| U8 PCIBusNum; /* 0x0E */ |
| U8 PCIDomainSegment; /* 0x0F */ |
| U32 Reserved1; /* 0x10 */ |
| U32 Reserved2; /* 0x14 */ |
| } MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, |
| Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; |
| |
| #define MPI2_IOCPAGE1_PAGEVERSION (0x05) |
| |
| /* defines for IOC Page 1 Flags field */ |
| #define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) |
| |
| #define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) |
| #define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) |
| #define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) |
| |
| /* IOC Page 6 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_6 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 CapabilitiesFlags; /* 0x04 */ |
| U8 MaxDrivesRAID0; /* 0x08 */ |
| U8 MaxDrivesRAID1; /* 0x09 */ |
| U8 MaxDrivesRAID1E; /* 0x0A */ |
| U8 MaxDrivesRAID10; /* 0x0B */ |
| U8 MinDrivesRAID0; /* 0x0C */ |
| U8 MinDrivesRAID1; /* 0x0D */ |
| U8 MinDrivesRAID1E; /* 0x0E */ |
| U8 MinDrivesRAID10; /* 0x0F */ |
| U32 Reserved1; /* 0x10 */ |
| U8 MaxGlobalHotSpares; /* 0x14 */ |
| U8 MaxPhysDisks; /* 0x15 */ |
| U8 MaxVolumes; /* 0x16 */ |
| U8 MaxConfigs; /* 0x17 */ |
| U8 MaxOCEDisks; /* 0x18 */ |
| U8 Reserved2; /* 0x19 */ |
| U16 Reserved3; /* 0x1A */ |
| U32 SupportedStripeSizeMapRAID0; /* 0x1C */ |
| U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ |
| U32 SupportedStripeSizeMapRAID10; /* 0x24 */ |
| U32 Reserved4; /* 0x28 */ |
| U32 Reserved5; /* 0x2C */ |
| U16 DefaultMetadataSize; /* 0x30 */ |
| U16 Reserved6; /* 0x32 */ |
| U16 MaxBadBlockTableEntries; /* 0x34 */ |
| U16 Reserved7; /* 0x36 */ |
| U32 IRNvsramVersion; /* 0x38 */ |
| } MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, |
| Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; |
| |
| #define MPI2_IOCPAGE6_PAGEVERSION (0x04) |
| |
| /* defines for IOC Page 6 CapabilitiesFlags */ |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) |
| #define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) |
| |
| |
| /* IOC Page 7 */ |
| |
| #define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_7 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x04 */ |
| U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ |
| U16 SASBroadcastPrimitiveMasks; /* 0x18 */ |
| U16 Reserved2; /* 0x1A */ |
| U32 Reserved3; /* 0x1C */ |
| } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, |
| Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; |
| |
| #define MPI2_IOCPAGE7_PAGEVERSION (0x01) |
| |
| |
| /* IOC Page 8 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_IOC_8 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 NumDevsPerEnclosure; /* 0x04 */ |
| U8 Reserved1; /* 0x05 */ |
| U16 Reserved2; /* 0x06 */ |
| U16 MaxPersistentEntries; /* 0x08 */ |
| U16 MaxNumPhysicalMappedIDs; /* 0x0A */ |
| U16 Flags; /* 0x0C */ |
| U16 Reserved3; /* 0x0E */ |
| U16 IRVolumeMappingFlags; /* 0x10 */ |
| U16 Reserved4; /* 0x12 */ |
| U32 Reserved5; /* 0x14 */ |
| } MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, |
| Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; |
| |
| #define MPI2_IOCPAGE8_PAGEVERSION (0x00) |
| |
| /* defines for IOC Page 8 Flags field */ |
| #define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) |
| #define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) |
| |
| #define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) |
| #define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) |
| #define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) |
| |
| #define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) |
| #define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) |
| |
| /* defines for IOC Page 8 IRVolumeMappingFlags */ |
| #define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) |
| #define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) |
| #define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) |
| |
| |
| /**************************************************************************** |
| * BIOS Config Pages |
| ****************************************************************************/ |
| |
| /* BIOS Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 BiosOptions; /* 0x04 */ |
| U32 IOCSettings; /* 0x08 */ |
| U32 Reserved1; /* 0x0C */ |
| U32 DeviceSettings; /* 0x10 */ |
| U16 NumberOfDevices; /* 0x14 */ |
| U16 Reserved2; /* 0x16 */ |
| U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ |
| U16 IOTimeoutSequential; /* 0x1A */ |
| U16 IOTimeoutOther; /* 0x1C */ |
| U16 IOTimeoutBlockDevicesRM; /* 0x1E */ |
| } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, |
| Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; |
| |
| #define MPI2_BIOSPAGE1_PAGEVERSION (0x04) |
| |
| /* values for BIOS Page 1 BiosOptions field */ |
| #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) |
| |
| /* values for BIOS Page 1 IOCSettings field */ |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) |
| #define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) |
| #define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) |
| #define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) |
| #define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) |
| #define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) |
| #define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) |
| #define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) |
| |
| #define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) |
| |
| /* values for BIOS Page 1 DeviceSettings field */ |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) |
| #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) |
| |
| |
| /* BIOS Page 2 */ |
| |
| typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER |
| { |
| U32 Reserved1; /* 0x00 */ |
| U32 Reserved2; /* 0x04 */ |
| U32 Reserved3; /* 0x08 */ |
| U32 Reserved4; /* 0x0C */ |
| U32 Reserved5; /* 0x10 */ |
| U32 Reserved6; /* 0x14 */ |
| } MPI2_BOOT_DEVICE_ADAPTER_ORDER, |
| MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, |
| Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_SAS_WWID |
| { |
| U64 SASAddress; /* 0x00 */ |
| U8 LUN[8]; /* 0x08 */ |
| U32 Reserved1; /* 0x10 */ |
| U32 Reserved2; /* 0x14 */ |
| } MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, |
| Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT |
| { |
| U64 EnclosureLogicalID; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U32 Reserved2; /* 0x0C */ |
| U16 SlotNumber; /* 0x10 */ |
| U16 Reserved3; /* 0x12 */ |
| U32 Reserved4; /* 0x14 */ |
| } MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, |
| MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, |
| Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; |
| |
| typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME |
| { |
| U64 DeviceName; /* 0x00 */ |
| U8 LUN[8]; /* 0x08 */ |
| U32 Reserved1; /* 0x10 */ |
| U32 Reserved2; /* 0x14 */ |
| } MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, |
| Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; |
| |
| typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE |
| { |
| MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; |
| MPI2_BOOT_DEVICE_SAS_WWID SasWwid; |
| MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; |
| MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; |
| } MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, |
| Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_2 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x04 */ |
| U32 Reserved2; /* 0x08 */ |
| U32 Reserved3; /* 0x0C */ |
| U32 Reserved4; /* 0x10 */ |
| U32 Reserved5; /* 0x14 */ |
| U32 Reserved6; /* 0x18 */ |
| U8 ReqBootDeviceForm; /* 0x1C */ |
| U8 Reserved7; /* 0x1D */ |
| U16 Reserved8; /* 0x1E */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ |
| U8 ReqAltBootDeviceForm; /* 0x38 */ |
| U8 Reserved9; /* 0x39 */ |
| U16 Reserved10; /* 0x3A */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ |
| U8 CurrentBootDeviceForm; /* 0x58 */ |
| U8 Reserved11; /* 0x59 */ |
| U16 Reserved12; /* 0x5A */ |
| MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ |
| } MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, |
| Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; |
| |
| #define MPI2_BIOSPAGE2_PAGEVERSION (0x04) |
| |
| /* values for BIOS Page 2 BootDeviceForm fields */ |
| #define MPI2_BIOSPAGE2_FORM_MASK (0x0F) |
| #define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) |
| #define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) |
| #define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) |
| #define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) |
| |
| |
| /* BIOS Page 3 */ |
| |
| typedef struct _MPI2_ADAPTER_INFO |
| { |
| U8 PciBusNumber; /* 0x00 */ |
| U8 PciDeviceAndFunctionNumber; /* 0x01 */ |
| U16 AdapterFlags; /* 0x02 */ |
| } MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, |
| Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; |
| |
| #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) |
| #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_3 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U32 GlobalFlags; /* 0x04 */ |
| U32 BiosVersion; /* 0x08 */ |
| MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ |
| U32 Reserved1; /* 0x1C */ |
| } MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, |
| Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; |
| |
| #define MPI2_BIOSPAGE3_PAGEVERSION (0x00) |
| |
| /* values for BIOS Page 3 GlobalFlags */ |
| #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) |
| #define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) |
| #define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) |
| |
| #define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) |
| #define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) |
| #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) |
| #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) |
| |
| |
| /* BIOS Page 4 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES |
| #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) |
| #endif |
| |
| typedef struct _MPI2_BIOS4_ENTRY |
| { |
| U64 ReassignmentWWID; /* 0x00 */ |
| U64 ReassignmentDeviceName; /* 0x08 */ |
| } MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, |
| Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_BIOS_4 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 NumPhys; /* 0x04 */ |
| U8 Reserved1; /* 0x05 */ |
| U16 Reserved2; /* 0x06 */ |
| MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ |
| } MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, |
| Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; |
| |
| #define MPI2_BIOSPAGE4_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * RAID Volume Config Pages |
| ****************************************************************************/ |
| |
| /* RAID Volume Page 0 */ |
| |
| typedef struct _MPI2_RAIDVOL0_PHYS_DISK |
| { |
| U8 RAIDSetNum; /* 0x00 */ |
| U8 PhysDiskMap; /* 0x01 */ |
| U8 PhysDiskNum; /* 0x02 */ |
| U8 Reserved; /* 0x03 */ |
| } MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, |
| Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; |
| |
| /* defines for the PhysDiskMap field */ |
| #define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) |
| #define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) |
| |
| typedef struct _MPI2_RAIDVOL0_SETTINGS |
| { |
| U16 Settings; /* 0x00 */ |
| U8 HotSparePool; /* 0x01 */ |
| U8 Reserved; /* 0x02 */ |
| } MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, |
| Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; |
| |
| /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ |
| #define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) |
| #define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) |
| #define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) |
| #define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) |
| #define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) |
| #define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) |
| #define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) |
| #define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) |
| |
| /* RAID Volume Page 0 VolumeSettings defines */ |
| #define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) |
| #define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) |
| |
| #define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) |
| #define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) |
| #define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) |
| #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength at runtime. |
| */ |
| #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX |
| #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U16 DevHandle; /* 0x04 */ |
| U8 VolumeState; /* 0x06 */ |
| U8 VolumeType; /* 0x07 */ |
| U32 VolumeStatusFlags; /* 0x08 */ |
| MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ |
| U64 MaxLBA; /* 0x10 */ |
| U32 StripeSize; /* 0x18 */ |
| U16 BlockSize; /* 0x1C */ |
| U16 Reserved1; /* 0x1E */ |
| U8 SupportedPhysDisks; /* 0x20 */ |
| U8 ResyncRate; /* 0x21 */ |
| U16 DataScrubDuration; /* 0x22 */ |
| U8 NumPhysDisks; /* 0x24 */ |
| U8 Reserved2; /* 0x25 */ |
| U8 Reserved3; /* 0x26 */ |
| U8 InactiveStatus; /* 0x27 */ |
| MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ |
| } MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, |
| Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; |
| |
| #define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) |
| |
| /* values for RAID VolumeState */ |
| #define MPI2_RAID_VOL_STATE_MISSING (0x00) |
| #define MPI2_RAID_VOL_STATE_FAILED (0x01) |
| #define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) |
| #define MPI2_RAID_VOL_STATE_ONLINE (0x03) |
| #define MPI2_RAID_VOL_STATE_DEGRADED (0x04) |
| #define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) |
| |
| /* values for RAID VolumeType */ |
| #define MPI2_RAID_VOL_TYPE_RAID0 (0x00) |
| #define MPI2_RAID_VOL_TYPE_RAID1E (0x01) |
| #define MPI2_RAID_VOL_TYPE_RAID1 (0x02) |
| #define MPI2_RAID_VOL_TYPE_RAID10 (0x05) |
| #define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) |
| |
| /* values for RAID Volume Page 0 VolumeStatusFlags field */ |
| #define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) |
| #define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) |
| |
| /* values for RAID Volume Page 0 SupportedPhysDisks field */ |
| #define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) |
| #define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) |
| #define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) |
| #define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) |
| |
| /* values for RAID Volume Page 0 InactiveStatus field */ |
| #define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) |
| #define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) |
| #define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) |
| #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) |
| #define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) |
| #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) |
| #define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) |
| |
| |
| /* RAID Volume Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U16 DevHandle; /* 0x04 */ |
| U16 Reserved0; /* 0x06 */ |
| U8 GUID[24]; /* 0x08 */ |
| U8 Name[16]; /* 0x20 */ |
| U64 WWID; /* 0x30 */ |
| U32 Reserved1; /* 0x38 */ |
| U32 Reserved2; /* 0x3C */ |
| } MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, |
| Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; |
| |
| #define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) |
| |
| |
| /**************************************************************************** |
| * RAID Physical Disk Config Pages |
| ****************************************************************************/ |
| |
| /* RAID Physical Disk Page 0 */ |
| |
| typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS |
| { |
| U16 Reserved1; /* 0x00 */ |
| U8 HotSparePool; /* 0x02 */ |
| U8 Reserved2; /* 0x03 */ |
| } MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, |
| Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; |
| |
| /* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ |
| |
| typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA |
| { |
| U8 VendorID[8]; /* 0x00 */ |
| U8 ProductID[16]; /* 0x08 */ |
| U8 ProductRevLevel[4]; /* 0x18 */ |
| U8 SerialNum[32]; /* 0x1C */ |
| } MPI2_RAIDPHYSDISK0_INQUIRY_DATA, |
| MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, |
| Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U16 DevHandle; /* 0x04 */ |
| U8 Reserved1; /* 0x06 */ |
| U8 PhysDiskNum; /* 0x07 */ |
| MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ |
| U32 Reserved2; /* 0x0C */ |
| MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ |
| U32 Reserved3; /* 0x4C */ |
| U8 PhysDiskState; /* 0x50 */ |
| U8 OfflineReason; /* 0x51 */ |
| U8 IncompatibleReason; /* 0x52 */ |
| U8 PhysDiskAttributes; /* 0x53 */ |
| U32 PhysDiskStatusFlags; /* 0x54 */ |
| U64 DeviceMaxLBA; /* 0x58 */ |
| U64 HostMaxLBA; /* 0x60 */ |
| U64 CoercedMaxLBA; /* 0x68 */ |
| U16 BlockSize; /* 0x70 */ |
| U16 Reserved5; /* 0x72 */ |
| U32 Reserved6; /* 0x74 */ |
| } MPI2_CONFIG_PAGE_RD_PDISK_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, |
| Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; |
| |
| #define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) |
| |
| /* PhysDiskState defines */ |
| #define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) |
| #define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) |
| #define MPI2_RAID_PD_STATE_OFFLINE (0x02) |
| #define MPI2_RAID_PD_STATE_ONLINE (0x03) |
| #define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) |
| #define MPI2_RAID_PD_STATE_DEGRADED (0x05) |
| #define MPI2_RAID_PD_STATE_REBUILDING (0x06) |
| #define MPI2_RAID_PD_STATE_OPTIMAL (0x07) |
| |
| /* OfflineReason defines */ |
| #define MPI2_PHYSDISK0_ONLINE (0x00) |
| #define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) |
| #define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) |
| #define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) |
| #define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) |
| #define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) |
| #define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) |
| |
| /* IncompatibleReason defines */ |
| #define MPI2_PHYSDISK0_COMPATIBLE (0x00) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) |
| #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) |
| |
| /* PhysDiskAttributes defines */ |
| #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) |
| #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) |
| #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) |
| #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) |
| |
| /* PhysDiskStatusFlags defines */ |
| #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) |
| #define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) |
| |
| |
| /* RAID Physical Disk Page 1 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.PageLength or NumPhysDiskPaths at runtime. |
| */ |
| #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX |
| #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_RAIDPHYSDISK1_PATH |
| { |
| U16 DevHandle; /* 0x00 */ |
| U16 Reserved1; /* 0x02 */ |
| U64 WWID; /* 0x04 */ |
| U64 OwnerWWID; /* 0x0C */ |
| U8 OwnerIdentifier; /* 0x14 */ |
| U8 Reserved2; /* 0x15 */ |
| U16 Flags; /* 0x16 */ |
| } MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, |
| Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; |
| |
| /* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ |
| #define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) |
| #define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) |
| #define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) |
| |
| typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 |
| { |
| MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ |
| U8 NumPhysDiskPaths; /* 0x04 */ |
| U8 PhysDiskNum; /* 0x05 */ |
| U16 Reserved1; /* 0x06 */ |
| U32 Reserved2; /* 0x08 */ |
| MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ |
| } MPI2_CONFIG_PAGE_RD_PDISK_1, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, |
| Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; |
| |
| #define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) |
| |
| |
| /**************************************************************************** |
| * values for fields used by several types of SAS Config Pages |
| ****************************************************************************/ |
| |
| /* values for NegotiatedLinkRates fields */ |
| #define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) |
| #define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) |
| #define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) |
| /* link rates used for Negotiated Physical and Logical Link Rate */ |
| #define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) |
| #define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) |
| #define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) |
| #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) |
| #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) |
| #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) |
| #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) |
| #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) |
| #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) |
| |
| |
| /* values for AttachedPhyInfo fields */ |
| #define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) |
| #define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) |
| #define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) |
| |
| #define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) |
| #define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) |
| #define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) |
| #define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) |
| #define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) |
| #define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) |
| #define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) |
| #define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) |
| #define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) |
| |
| |
| /* values for PhyInfo fields */ |
| #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) |
| #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) |
| #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) |
| #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) |
| #define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) |
| #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) |
| #define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) |
| |
| #define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) |
| #define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) |
| #define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) |
| #define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) |
| #define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) |
| #define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) |
| #define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) |
| #define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) |
| #define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) |
| |
| #define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) |
| #define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) |
| #define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) |
| #define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) |
| |
| #define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) |
| #define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) |
| |
| #define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) |
| #define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) |
| #define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) |
| #define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) |
| |
| |
| /* values for SAS ProgrammedLinkRate fields */ |
| #define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) |
| #define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) |
| #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) |
| #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) |
| #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) |
| #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) |
| #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) |
| #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) |
| |
| |
| /* values for SAS HwLinkRate fields */ |
| #define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) |
| #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) |
| #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) |
| #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) |
| #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) |
| #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) |
| #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) |
| #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) |
| |
| |
| |
| /**************************************************************************** |
| * SAS IO Unit Config Pages |
| ****************************************************************************/ |
| |
| /* SAS IO Unit Page 0 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA |
| { |
| U8 Port; /* 0x00 */ |
| U8 PortFlags; /* 0x01 */ |
| U8 PhyFlags; /* 0x02 */ |
| U8 NegotiatedLinkRate; /* 0x03 */ |
| U32 ControllerPhyDeviceInfo;/* 0x04 */ |
| U16 AttachedDevHandle; /* 0x08 */ |
| U16 ControllerDevHandle; /* 0x0A */ |
| U32 DiscoveryStatus; /* 0x0C */ |
| U32 Reserved; /* 0x10 */ |
| } MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, |
| Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.ExtPageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT0_PHY_MAX |
| #define MPI2_SAS_IOUNIT0_PHY_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U8 NumPhys; /* 0x0C */ |
| U8 Reserved2; /* 0x0D */ |
| U16 Reserved3; /* 0x0E */ |
| MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, |
| Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; |
| |
| #define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) |
| |
| /* values for SAS IO Unit Page 0 PortFlags */ |
| #define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) |
| #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /* values for SAS IO Unit Page 0 PhyFlags */ |
| #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) |
| #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) |
| |
| /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| /* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ |
| |
| /* values for SAS IO Unit Page 0 DiscoveryStatus */ |
| #define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) |
| #define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) |
| #define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) |
| #define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) |
| #define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) |
| #define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) |
| #define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) |
| #define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) |
| #define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) |
| |
| |
| /* SAS IO Unit Page 1 */ |
| |
| typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA |
| { |
| U8 Port; /* 0x00 */ |
| U8 PortFlags; /* 0x01 */ |
| U8 PhyFlags; /* 0x02 */ |
| U8 MaxMinLinkRate; /* 0x03 */ |
| U32 ControllerPhyDeviceInfo; /* 0x04 */ |
| U16 MaxTargetPortConnectTime; /* 0x08 */ |
| U16 Reserved1; /* 0x0A */ |
| } MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, |
| Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.ExtPageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT1_PHY_MAX |
| #define MPI2_SAS_IOUNIT1_PHY_MAX (1) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U16 ControlFlags; /* 0x08 */ |
| U16 SASNarrowMaxQueueDepth; /* 0x0A */ |
| U16 AdditionalControlFlags; /* 0x0C */ |
| U16 SASWideMaxQueueDepth; /* 0x0E */ |
| U8 NumPhys; /* 0x10 */ |
| U8 SATAMaxQDepth; /* 0x11 */ |
| U8 ReportDeviceMissingDelay; /* 0x12 */ |
| U8 IODeviceMissingDelay; /* 0x13 */ |
| MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_1, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, |
| Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; |
| |
| #define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) |
| |
| /* values for SAS IO Unit Page 1 ControlFlags */ |
| #define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) |
| |
| #define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) |
| #define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) |
| #define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) |
| |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) |
| #define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) |
| #define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) |
| #define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) |
| #define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) |
| #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) |
| |
| /* values for SAS IO Unit Page 1 AdditionalControlFlags */ |
| #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) |
| #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) |
| #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) |
| #define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) |
| #define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) |
| #define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) |
| #define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) |
| #define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) |
| |
| /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ |
| #define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) |
| #define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) |
| |
| /* values for SAS IO Unit Page 1 PortFlags */ |
| #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) |
| |
| /* values for SAS IO Unit Page 2 PhyFlags */ |
| #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) |
| #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) |
| |
| /* values for SAS IO Unit Page 0 MaxMinLinkRate */ |
| #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) |
| #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) |
| #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) |
| #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) |
| #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) |
| #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) |
| #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) |
| #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) |
| |
| /* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ |
| |
| |
| /* SAS IO Unit Page 4 */ |
| |
| typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP |
| { |
| U8 MaxTargetSpinup; /* 0x00 */ |
| U8 SpinupDelay; /* 0x01 */ |
| U16 Reserved1; /* 0x02 */ |
| } MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, |
| Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * four and check Header.ExtPageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_SAS_IOUNIT4_PHY_MAX |
| #define MPI2_SAS_IOUNIT4_PHY_MAX (4) |
| #endif |
| |
| typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ |
| U32 Reserved1; /* 0x18 */ |
| U32 Reserved2; /* 0x1C */ |
| U32 Reserved3; /* 0x20 */ |
| U8 BootDeviceWaitTime; /* 0x24 */ |
| U8 Reserved4; /* 0x25 */ |
| U16 Reserved5; /* 0x26 */ |
| U8 NumPhys; /* 0x28 */ |
| U8 PEInitialSpinupDelay; /* 0x29 */ |
| U8 PEReplyDelay; /* 0x2A */ |
| U8 Flags; /* 0x2B */ |
| U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ |
| } MPI2_CONFIG_PAGE_SASIOUNIT_4, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, |
| Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; |
| |
| #define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) |
| |
| /* defines for Flags field */ |
| #define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) |
| |
| /* defines for PHY field */ |
| #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) |
| |
| |
| /**************************************************************************** |
| * SAS Expander Config Pages |
| ****************************************************************************/ |
| |
| /* SAS Expander Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U8 PhysicalPort; /* 0x08 */ |
| U8 ReportGenLength; /* 0x09 */ |
| U16 EnclosureHandle; /* 0x0A */ |
| U64 SASAddress; /* 0x0C */ |
| U32 DiscoveryStatus; /* 0x14 */ |
| U16 DevHandle; /* 0x18 */ |
| U16 ParentDevHandle; /* 0x1A */ |
| U16 ExpanderChangeCount; /* 0x1C */ |
| U16 ExpanderRouteIndexes; /* 0x1E */ |
| U8 NumPhys; /* 0x20 */ |
| U8 SASLevel; /* 0x21 */ |
| U16 Flags; /* 0x22 */ |
| U16 STPBusInactivityTimeLimit; /* 0x24 */ |
| U16 STPMaxConnectTimeLimit; /* 0x26 */ |
| U16 STP_SMP_NexusLossTime; /* 0x28 */ |
| U16 MaxNumRoutedSasAddresses; /* 0x2A */ |
| U64 ActiveZoneManagerSASAddress;/* 0x2C */ |
| U16 ZoneLockInactivityLimit; /* 0x34 */ |
| U16 Reserved1; /* 0x36 */ |
| } MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, |
| Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; |
| |
| #define MPI2_SASEXPANDER0_PAGEVERSION (0x05) |
| |
| /* values for SAS Expander Page 0 DiscoveryStatus field */ |
| #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) |
| #define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) |
| #define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) |
| #define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) |
| #define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) |
| #define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) |
| #define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) |
| #define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) |
| #define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) |
| |
| /* values for SAS Expander Page 0 Flags field */ |
| #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) |
| #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) |
| #define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) |
| #define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) |
| #define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) |
| #define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) |
| #define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) |
| |
| |
| /* SAS Expander Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U8 PhysicalPort; /* 0x08 */ |
| U8 Reserved1; /* 0x09 */ |
| U16 Reserved2; /* 0x0A */ |
| U8 NumPhys; /* 0x0C */ |
| U8 Phy; /* 0x0D */ |
| U16 NumTableEntriesProgrammed; /* 0x0E */ |
| U8 ProgrammedLinkRate; /* 0x10 */ |
| U8 HwLinkRate; /* 0x11 */ |
| U16 AttachedDevHandle; /* 0x12 */ |
| U32 PhyInfo; /* 0x14 */ |
| U32 AttachedDeviceInfo; /* 0x18 */ |
| U16 ExpanderDevHandle; /* 0x1C */ |
| U8 ChangeCount; /* 0x1E */ |
| U8 NegotiatedLinkRate; /* 0x1F */ |
| U8 PhyIdentifier; /* 0x20 */ |
| U8 AttachedPhyIdentifier; /* 0x21 */ |
| U8 Reserved3; /* 0x22 */ |
| U8 DiscoveryInfo; /* 0x23 */ |
| U32 AttachedPhyInfo; /* 0x24 */ |
| U8 ZoneGroup; /* 0x28 */ |
| U8 SelfConfigStatus; /* 0x29 */ |
| U16 Reserved4; /* 0x2A */ |
| } MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, |
| Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; |
| |
| #define MPI2_SASEXPANDER1_PAGEVERSION (0x02) |
| |
| /* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ |
| |
| /* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ |
| |
| /* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ |
| |
| /* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ |
| |
| /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| /* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ |
| |
| /* values for SAS Expander Page 1 DiscoveryInfo field */ |
| #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) |
| #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) |
| #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) |
| |
| |
| /**************************************************************************** |
| * SAS Device Config Pages |
| ****************************************************************************/ |
| |
| /* SAS Device Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U16 Slot; /* 0x08 */ |
| U16 EnclosureHandle; /* 0x0A */ |
| U64 SASAddress; /* 0x0C */ |
| U16 ParentDevHandle; /* 0x14 */ |
| U8 PhyNum; /* 0x16 */ |
| U8 AccessStatus; /* 0x17 */ |
| U16 DevHandle; /* 0x18 */ |
| U8 AttachedPhyIdentifier; /* 0x1A */ |
| U8 ZoneGroup; /* 0x1B */ |
| U32 DeviceInfo; /* 0x1C */ |
| U16 Flags; /* 0x20 */ |
| U8 PhysicalPort; /* 0x22 */ |
| U8 MaxPortConnections; /* 0x23 */ |
| U64 DeviceName; /* 0x24 */ |
| U8 PortGroups; /* 0x2C */ |
| U8 DmaGroup; /* 0x2D */ |
| U8 ControlGroup; /* 0x2E */ |
| U8 Reserved1; /* 0x2F */ |
| U32 Reserved2; /* 0x30 */ |
| U32 Reserved3; /* 0x34 */ |
| } MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, |
| Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; |
| |
| #define MPI2_SASDEVICE0_PAGEVERSION (0x08) |
| |
| /* values for SAS Device Page 0 AccessStatus field */ |
| #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) |
| #define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) |
| #define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) |
| /* specific values for SATA Init failures */ |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) |
| #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) |
| |
| /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ |
| |
| /* values for SAS Device Page 0 Flags field */ |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) |
| #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) |
| #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) |
| #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) |
| #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) |
| |
| |
| /* SAS Device Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U64 SASAddress; /* 0x0C */ |
| U32 Reserved2; /* 0x14 */ |
| U16 DevHandle; /* 0x18 */ |
| U16 Reserved3; /* 0x1A */ |
| U8 InitialRegDeviceFIS[20];/* 0x1C */ |
| } MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, |
| Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; |
| |
| #define MPI2_SASDEVICE1_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * SAS PHY Config Pages |
| ****************************************************************************/ |
| |
| /* SAS PHY Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U16 OwnerDevHandle; /* 0x08 */ |
| U16 Reserved1; /* 0x0A */ |
| U16 AttachedDevHandle; /* 0x0C */ |
| U8 AttachedPhyIdentifier; /* 0x0E */ |
| U8 Reserved2; /* 0x0F */ |
| U32 AttachedPhyInfo; /* 0x10 */ |
| U8 ProgrammedLinkRate; /* 0x14 */ |
| U8 HwLinkRate; /* 0x15 */ |
| U8 ChangeCount; /* 0x16 */ |
| U8 Flags; /* 0x17 */ |
| U32 PhyInfo; /* 0x18 */ |
| U8 NegotiatedLinkRate; /* 0x1C */ |
| U8 Reserved3; /* 0x1D */ |
| U16 Reserved4; /* 0x1E */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, |
| Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; |
| |
| #define MPI2_SASPHY0_PAGEVERSION (0x03) |
| |
| /* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ |
| |
| /* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ |
| |
| /* values for SAS PHY Page 0 Flags field */ |
| #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) |
| |
| /* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ |
| |
| /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ |
| |
| /* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ |
| |
| |
| /* SAS PHY Page 1 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U32 InvalidDwordCount; /* 0x0C */ |
| U32 RunningDisparityErrorCount; /* 0x10 */ |
| U32 LossDwordSynchCount; /* 0x14 */ |
| U32 PhyResetProblemCount; /* 0x18 */ |
| } MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, |
| Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; |
| |
| #define MPI2_SASPHY1_PAGEVERSION (0x01) |
| |
| |
| /**************************************************************************** |
| * SAS Port Config Pages |
| ****************************************************************************/ |
| |
| /* SAS Port Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U8 PortNumber; /* 0x08 */ |
| U8 PhysicalPort; /* 0x09 */ |
| U8 PortWidth; /* 0x0A */ |
| U8 PhysicalPortWidth; /* 0x0B */ |
| U8 ZoneGroup; /* 0x0C */ |
| U8 Reserved1; /* 0x0D */ |
| U16 Reserved2; /* 0x0E */ |
| U64 SASAddress; /* 0x10 */ |
| U32 DeviceInfo; /* 0x18 */ |
| U32 Reserved3; /* 0x1C */ |
| U32 Reserved4; /* 0x20 */ |
| } MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, |
| Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; |
| |
| #define MPI2_SASPORT0_PAGEVERSION (0x00) |
| |
| /* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ |
| |
| |
| /**************************************************************************** |
| * SAS Enclosure Config Pages |
| ****************************************************************************/ |
| |
| /* SAS Enclosure Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U64 EnclosureLogicalID; /* 0x0C */ |
| U16 Flags; /* 0x14 */ |
| U16 EnclosureHandle; /* 0x16 */ |
| U16 NumSlots; /* 0x18 */ |
| U16 StartSlot; /* 0x1A */ |
| U16 Reserved2; /* 0x1C */ |
| U16 SEPDevHandle; /* 0x1E */ |
| U32 Reserved3; /* 0x20 */ |
| U32 Reserved4; /* 0x24 */ |
| } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, |
| Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; |
| |
| #define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) |
| |
| /* values for SAS Enclosure Page 0 Flags field */ |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) |
| #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) |
| |
| |
| /**************************************************************************** |
| * Log Config Page |
| ****************************************************************************/ |
| |
| /* Log Page 0 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.ExtPageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES |
| #define MPI2_LOG_0_NUM_LOG_ENTRIES (1) |
| #endif |
| |
| #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) |
| |
| typedef struct _MPI2_LOG_0_ENTRY |
| { |
| U64 TimeStamp; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U16 LogSequence; /* 0x0C */ |
| U16 LogEntryQualifier; /* 0x0E */ |
| U8 VP_ID; /* 0x10 */ |
| U8 VF_ID; /* 0x11 */ |
| U16 Reserved2; /* 0x12 */ |
| U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ |
| } MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, |
| Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; |
| |
| /* values for Log Page 0 LogEntry LogEntryQualifier field */ |
| #define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) |
| #define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) |
| #define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) |
| #define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) |
| #define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) |
| |
| typedef struct _MPI2_CONFIG_PAGE_LOG_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U32 Reserved1; /* 0x08 */ |
| U32 Reserved2; /* 0x0C */ |
| U16 NumLogEntries; /* 0x10 */ |
| U16 Reserved3; /* 0x12 */ |
| MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ |
| } MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, |
| Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; |
| |
| #define MPI2_LOG_0_PAGEVERSION (0x02) |
| |
| |
| /**************************************************************************** |
| * RAID Config Page |
| ****************************************************************************/ |
| |
| /* RAID Page 0 */ |
| |
| /* |
| * Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| * one and check Header.ExtPageLength or NumPhys at runtime. |
| */ |
| #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS |
| #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) |
| #endif |
| |
| typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT |
| { |
| U16 ElementFlags; /* 0x00 */ |
| U16 VolDevHandle; /* 0x02 */ |
| U8 HotSparePool; /* 0x04 */ |
| U8 PhysDiskNum; /* 0x05 */ |
| U16 PhysDiskDevHandle; /* 0x06 */ |
| } MPI2_RAIDCONFIG0_CONFIG_ELEMENT, |
| MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, |
| Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; |
| |
| /* values for the ElementFlags field */ |
| #define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) |
| #define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) |
| #define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) |
| #define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) |
| #define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) |
| |
| |
| typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| U8 NumHotSpares; /* 0x08 */ |
| U8 NumPhysDisks; /* 0x09 */ |
| U8 NumVolumes; /* 0x0A */ |
| U8 ConfigNum; /* 0x0B */ |
| U32 Flags; /* 0x0C */ |
| U8 ConfigGUID[24]; /* 0x10 */ |
| U32 Reserved1; /* 0x28 */ |
| U8 NumElements; /* 0x2C */ |
| U8 Reserved2; /* 0x2D */ |
| U16 Reserved3; /* 0x2E */ |
| MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ |
| } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, |
| Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; |
| |
| #define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) |
| |
| /* values for RAID Configuration Page 0 Flags field */ |
| #define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) |
| |
| |
| /**************************************************************************** |
| * Driver Persistent Mapping Config Pages |
| ****************************************************************************/ |
| |
| /* Driver Persistent Mapping Page 0 */ |
| |
| typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY |
| { |
| U64 PhysicalIdentifier; /* 0x00 */ |
| U16 MappingInformation; /* 0x08 */ |
| U16 DeviceIndex; /* 0x0A */ |
| U32 PhysicalBitsMapping; /* 0x0C */ |
| U32 Reserved1; /* 0x10 */ |
| } MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, |
| Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; |
| |
| typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 |
| { |
| MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ |
| MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ |
| } MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, |
| MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, |
| Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; |
| |
| #define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) |
| |
| /* values for Driver Persistent Mapping Page 0 MappingInformation field */ |
| #define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) |
| #define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) |
| #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) |
| |
| |
| #endif |
| |
