| /* |
| * linux/arch/alpha/kernel/sys_rawhide.c |
| * |
| * Copyright (C) 1995 David A Rusling |
| * Copyright (C) 1996 Jay A Estabrook |
| * Copyright (C) 1998, 1999 Richard Henderson |
| * |
| * Code supporting the RAWHIDE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/core_mcpcia.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| #include "pci_impl.h" |
| #include "machvec_impl.h" |
| |
| |
| /* |
| * HACK ALERT! only the boot cpu is used for interrupts. |
| */ |
| |
| |
| /* Note mask bit is true for ENABLED irqs. */ |
| |
| static unsigned int hose_irq_masks[4] = { |
| 0xff0000, 0xfe0000, 0xff0000, 0xff0000 |
| }; |
| static unsigned int cached_irq_masks[4]; |
| DEFINE_SPINLOCK(rawhide_irq_lock); |
| |
| static inline void |
| rawhide_update_irq_hw(int hose, int mask) |
| { |
| *(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose)) = mask; |
| mb(); |
| *(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose)); |
| } |
| |
| #define hose_exists(h) \ |
| (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0)) |
| |
| static inline void |
| rawhide_enable_irq(unsigned int irq) |
| { |
| unsigned int mask, hose; |
| |
| irq -= 16; |
| hose = irq / 24; |
| if (!hose_exists(hose)) /* if hose non-existent, exit */ |
| return; |
| |
| irq -= hose * 24; |
| mask = 1 << irq; |
| |
| spin_lock(&rawhide_irq_lock); |
| mask |= cached_irq_masks[hose]; |
| cached_irq_masks[hose] = mask; |
| rawhide_update_irq_hw(hose, mask); |
| spin_unlock(&rawhide_irq_lock); |
| } |
| |
| static void |
| rawhide_disable_irq(unsigned int irq) |
| { |
| unsigned int mask, hose; |
| |
| irq -= 16; |
| hose = irq / 24; |
| if (!hose_exists(hose)) /* if hose non-existent, exit */ |
| return; |
| |
| irq -= hose * 24; |
| mask = ~(1 << irq) | hose_irq_masks[hose]; |
| |
| spin_lock(&rawhide_irq_lock); |
| mask &= cached_irq_masks[hose]; |
| cached_irq_masks[hose] = mask; |
| rawhide_update_irq_hw(hose, mask); |
| spin_unlock(&rawhide_irq_lock); |
| } |
| |
| static void |
| rawhide_mask_and_ack_irq(unsigned int irq) |
| { |
| unsigned int mask, mask1, hose; |
| |
| irq -= 16; |
| hose = irq / 24; |
| if (!hose_exists(hose)) /* if hose non-existent, exit */ |
| return; |
| |
| irq -= hose * 24; |
| mask1 = 1 << irq; |
| mask = ~mask1 | hose_irq_masks[hose]; |
| |
| spin_lock(&rawhide_irq_lock); |
| |
| mask &= cached_irq_masks[hose]; |
| cached_irq_masks[hose] = mask; |
| rawhide_update_irq_hw(hose, mask); |
| |
| /* Clear the interrupt. */ |
| *(vuip)MCPCIA_INT_REQ(MCPCIA_HOSE2MID(hose)) = mask1; |
| |
| spin_unlock(&rawhide_irq_lock); |
| } |
| |
| static unsigned int |
| rawhide_startup_irq(unsigned int irq) |
| { |
| rawhide_enable_irq(irq); |
| return 0; |
| } |
| |
| static void |
| rawhide_end_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| rawhide_enable_irq(irq); |
| } |
| |
| static struct hw_interrupt_type rawhide_irq_type = { |
| .typename = "RAWHIDE", |
| .startup = rawhide_startup_irq, |
| .shutdown = rawhide_disable_irq, |
| .enable = rawhide_enable_irq, |
| .disable = rawhide_disable_irq, |
| .ack = rawhide_mask_and_ack_irq, |
| .end = rawhide_end_irq, |
| }; |
| |
| static void |
| rawhide_srm_device_interrupt(unsigned long vector) |
| { |
| int irq; |
| |
| irq = (vector - 0x800) >> 4; |
| |
| /* |
| * The RAWHIDE SRM console reports PCI interrupts with a vector |
| * 0x80 *higher* than one might expect, as PCI IRQ 0 (ie bit 0) |
| * shows up as IRQ 24, etc, etc. We adjust it down by 8 to have |
| * it line up with the actual bit numbers from the REQ registers, |
| * which is how we manage the interrupts/mask. Sigh... |
| * |
| * Also, PCI #1 interrupts are offset some more... :-( |
| */ |
| |
| if (irq == 52) { |
| /* SCSI on PCI1 is special. */ |
| irq = 72; |
| } |
| |
| /* Adjust by which hose it is from. */ |
| irq -= ((irq + 16) >> 2) & 0x38; |
| |
| handle_irq(irq); |
| } |
| |
| static void __init |
| rawhide_init_irq(void) |
| { |
| struct pci_controller *hose; |
| long i; |
| |
| mcpcia_init_hoses(); |
| |
| /* Clear them all; only hoses that exist will be non-zero. */ |
| for (i = 0; i < MCPCIA_MAX_HOSES; i++) cached_irq_masks[i] = 0; |
| |
| for (hose = hose_head; hose; hose = hose->next) { |
| unsigned int h = hose->index; |
| unsigned int mask = hose_irq_masks[h]; |
| |
| cached_irq_masks[h] = mask; |
| *(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(h)) = mask; |
| *(vuip)MCPCIA_INT_MASK1(MCPCIA_HOSE2MID(h)) = 0; |
| } |
| |
| for (i = 16; i < 128; ++i) { |
| irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL; |
| irq_desc[i].chip = &rawhide_irq_type; |
| } |
| |
| init_i8259a_irqs(); |
| common_init_isa_dma(); |
| } |
| |
| /* |
| * PCI Fixup configuration. |
| * |
| * Summary @ MCPCIA_PCI0_INT_REQ: |
| * Bit Meaning |
| * 0 Interrupt Line A from slot 2 PCI0 |
| * 1 Interrupt Line B from slot 2 PCI0 |
| * 2 Interrupt Line C from slot 2 PCI0 |
| * 3 Interrupt Line D from slot 2 PCI0 |
| * 4 Interrupt Line A from slot 3 PCI0 |
| * 5 Interrupt Line B from slot 3 PCI0 |
| * 6 Interrupt Line C from slot 3 PCI0 |
| * 7 Interrupt Line D from slot 3 PCI0 |
| * 8 Interrupt Line A from slot 4 PCI0 |
| * 9 Interrupt Line B from slot 4 PCI0 |
| * 10 Interrupt Line C from slot 4 PCI0 |
| * 11 Interrupt Line D from slot 4 PCI0 |
| * 12 Interrupt Line A from slot 5 PCI0 |
| * 13 Interrupt Line B from slot 5 PCI0 |
| * 14 Interrupt Line C from slot 5 PCI0 |
| * 15 Interrupt Line D from slot 5 PCI0 |
| * 16 EISA interrupt (PCI 0) or SCSI interrupt (PCI 1) |
| * 17-23 NA |
| * |
| * IdSel |
| * 1 EISA bridge (PCI bus 0 only) |
| * 2 PCI option slot 2 |
| * 3 PCI option slot 3 |
| * 4 PCI option slot 4 |
| * 5 PCI option slot 5 |
| * |
| */ |
| |
| static int __init |
| rawhide_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[5][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 16+16, 16+16, 16+16, 16+16, 16+16}, /* IdSel 1 SCSI PCI 1 */ |
| { 16+ 0, 16+ 0, 16+ 1, 16+ 2, 16+ 3}, /* IdSel 2 slot 2 */ |
| { 16+ 4, 16+ 4, 16+ 5, 16+ 6, 16+ 7}, /* IdSel 3 slot 3 */ |
| { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 4 slot 4 */ |
| { 16+12, 16+12, 16+13, 16+14, 16+15} /* IdSel 5 slot 5 */ |
| }; |
| const long min_idsel = 1, max_idsel = 5, irqs_per_slot = 5; |
| |
| struct pci_controller *hose = dev->sysdata; |
| int irq = COMMON_TABLE_LOOKUP; |
| if (irq >= 0) |
| irq += 24 * hose->index; |
| return irq; |
| } |
| |
| |
| /* |
| * The System Vector |
| */ |
| |
| struct alpha_machine_vector rawhide_mv __initmv = { |
| .vector_name = "Rawhide", |
| DO_EV5_MMU, |
| DO_DEFAULT_RTC, |
| DO_MCPCIA_IO, |
| .machine_check = mcpcia_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = MCPCIA_DEFAULT_MEM_BASE, |
| .pci_dac_offset = MCPCIA_DAC_OFFSET, |
| |
| .nr_irqs = 128, |
| .device_interrupt = rawhide_srm_device_interrupt, |
| |
| .init_arch = mcpcia_init_arch, |
| .init_irq = rawhide_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = common_init_pci, |
| .kill_arch = NULL, |
| .pci_map_irq = rawhide_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| ALIAS_MV(rawhide) |
