drivers/staging/benet/fwcmd_opcodes.h - maze/linux - Git at Google

 /*
  * Copyright (C) 2005 - 2008 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
  * Contact Information:
  * linux-drivers@serverengines.com
  *
  * ServerEngines
  * 209 N. Fair Oaks Ave
  * Sunnyvale, CA 94085
  */
 /*
  * Autogenerated by srcgen version: 0127
  */
 #ifndef __fwcmd_opcodes_amap_h__
 #define __fwcmd_opcodes_amap_h__

 /*
  * --- FWCMD_SUBSYSTEMS ---
  * The commands are grouped into the following subsystems. The subsystem
  * code along with the opcode uniquely identify a particular fwcmd.
  */
 #define FWCMD_SUBSYSTEM_RSVD  (0)	/* This subsystem is reserved. It is */
 						  /* never used. */
 #define FWCMD_SUBSYSTEM_COMMON (1)	/* CMDs in this group are common to
 					* all subsystems. See
 					* COMMON_SUBSYSTEM_OPCODES for opcodes
 					* and Common Host Configuration CMDs
 					* for the FWCMD descriptions.
 					*/
 #define FWCMD_SUBSYSTEM_COMMON_ISCSI    (2) /* CMDs in this group are */
 					/*
 					* common to Initiator and Target. See
 					* COMMON_ISCSI_SUBSYSTEM_OPCODES and
 					* Common iSCSI Initiator and Target
 					* CMDs for the command descriptions.
 					*/
 #define FWCMD_SUBSYSTEM_ETH             (3)	/* This subsystem is used to
 						execute  Ethernet commands.  */

 #define FWCMD_SUBSYSTEM_TPM             (4)	/* This subsystem is used
 						 to execute TPM  commands.  */
 #define FWCMD_SUBSYSTEM_PXE_UNDI        (5)	/* This subsystem is used
 						* to execute PXE
 						* and UNDI specific commands.
 						*/

 #define FWCMD_SUBSYSTEM_ISCSI_INI       (6)	/* This subsystem is used to
 						execute ISCSI Initiator
 						specific commands.
 						*/
 #define FWCMD_SUBSYSTEM_ISCSI_TGT       (7)	/* This subsystem is used
 						to execute iSCSI Target
 						specific commands.between
 						PTL and ARM firmware.
 						*/
 #define FWCMD_SUBSYSTEM_MILI_PTL        (8)	/* This subsystem is used to
 						execute iSCSI Target specific
 						commands.between MILI
 						and PTL.  */
 #define FWCMD_SUBSYSTEM_MILI_TMD        (9)	/* This subsystem is used to
 						execute iSCSI Target specific
 						commands between MILI
 						and TMD.  */
 #define FWCMD_SUBSYSTEM_PROXY           (11)	/* This subsystem is used
 						to execute proxied commands
 						within the host at the
 						explicit request of a
 						non priviledged domain.
 						This 'subsystem' is entirely
 						virtual from the controller
 						and firmware perspective as
 						it is implemented in host
 						drivers.
 						*/

 /*
  * --- COMMON_SUBSYSTEM_OPCODES ---
  * These opcodes are common to both networking and storage PCI
  * functions. They are used to reserve resources and configure
  * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
  * subsystem code.
  */
 #define OPCODE_COMMON_NTWK_MAC_QUERY    (1)
 #define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
 #define SUBSYSTEM_COMMON_NTWK_MAC_SET   (1)
 #define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
 #define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
 #define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
 #define SUBSYSTEM_COMMON_READ_FLASHROM  (1)
 #define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
 #define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
 #define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
 #define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
 #define SUBSYSTEM_COMMON_RING_DESTROY   (1)
 #define SUBSYSTEM_COMMON_CQ_CREATE      (1)
 #define SUBSYSTEM_COMMON_EQ_CREATE      (1)
 #define SUBSYSTEM_COMMON_ETH_RX_CREATE  (1)
 #define SUBSYSTEM_COMMON_ETH_TX_CREATE  (1)
 #define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
 #define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
 #define SUBSYSTEM_COMMON_MCC_CREATE     (1)
 #define SUBSYSTEM_COMMON_JELL_CONFIG    (1)
 #define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
 #define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
 #define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
 #define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
 #define SUBSYSTEM_COMMON_GET_QOS        (1)
 #define SUBSYSTEM_COMMON_SET_QOS        (1)
 #define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
 #define SUBSYSTEM_COMMON_SEEPROM_READ   (1)
 #define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
 #define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
 #define SUBSYSTEM_COMMON_NOP            (1)
 #define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
 #define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
 #define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
 #define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
 #define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
 #define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
 #define SUBSYSTEM_COMMON_GET_FAT        (1)
 #define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
 #define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
 #define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
 #define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
 #define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
 #define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
 #define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
 #define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
 #define SUBSYSTEM_COMMON_RED_CONFIG     (1)
 #define OPCODE_COMMON_NTWK_MAC_SET      (2)
 #define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
 #define OPCODE_COMMON_NTWK_VLAN_CONFIG  (4)
 #define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
 #define OPCODE_COMMON_READ_FLASHROM     (6)
 #define OPCODE_COMMON_WRITE_FLASHROM    (7)
 #define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
 #define OPCODE_COMMON_ADD_PAGE_TABLES   (9)
 #define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
 #define OPCODE_COMMON_RING_DESTROY      (11)
 #define OPCODE_COMMON_CQ_CREATE         (12)
 #define OPCODE_COMMON_EQ_CREATE         (13)
 #define OPCODE_COMMON_ETH_RX_CREATE     (14)
 #define OPCODE_COMMON_ETH_TX_CREATE     (15)
 #define OPCODE_COMMON_NET_RESERVED0     (16)	/* Reserved */
 #define OPCODE_COMMON_NET_RESERVED1     (17)	/* Reserved */
 #define OPCODE_COMMON_NET_RESERVED2     (18)	/* Reserved */
 #define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
 #define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
 #define OPCODE_COMMON_MCC_CREATE        (21)
 #define OPCODE_COMMON_JELL_CONFIG       (22)
 #define OPCODE_COMMON_FORCE_FAILOVER    (23)
 #define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
 #define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
 #define OPCODE_COMMON_POST_ZERO_BUFFER  (26)
 #define OPCODE_COMMON_GET_QOS           (27)
 #define OPCODE_COMMON_SET_QOS           (28)
 #define OPCODE_COMMON_TCP_GET_STATISTICS (29)
 #define OPCODE_COMMON_SEEPROM_READ      (30)
 #define OPCODE_COMMON_TCP_STATE_QUERY   (31)
 #define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
 #define OPCODE_COMMON_NOP               (33)
 #define OPCODE_COMMON_NTWK_RX_FILTER    (34)
 #define OPCODE_COMMON_GET_FW_VERSION    (35)
 #define OPCODE_COMMON_SET_FLOW_CONTROL  (36)
 #define OPCODE_COMMON_GET_FLOW_CONTROL  (37)
 #define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
 #define OPCODE_COMMON_SET_FRAME_SIZE    (39)
 #define OPCODE_COMMON_GET_FAT           (40)
 #define OPCODE_COMMON_MODIFY_EQ_DELAY   (41)
 #define OPCODE_COMMON_FIRMWARE_CONFIG   (42)
 #define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
 #define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
 #define OPCODE_COMMON_SET_VLD_CONFIG    (45)
 #define OPCODE_COMMON_GET_VLD_CONFIG    (46)
 #define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
 #define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
 #define OPCODE_COMMON_RED_CONFIG        (49)


 /*
  * --- ETH_SUBSYSTEM_OPCODES ---
  * These opcodes are used for configuring the Ethernet interfaces. These
  * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
  */
 #define OPCODE_ETH_RSS_CONFIG           (1)
 #define OPCODE_ETH_ACPI_CONFIG          (2)
 #define SUBSYSTEM_ETH_RSS_CONFIG        (3)
 #define SUBSYSTEM_ETH_ACPI_CONFIG       (3)
 #define OPCODE_ETH_PROMISCUOUS          (3)
 #define SUBSYSTEM_ETH_PROMISCUOUS       (3)
 #define SUBSYSTEM_ETH_GET_STATISTICS    (3)
 #define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE  (3)
 #define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE  (3)
 #define OPCODE_ETH_GET_STATISTICS       (4)
 #define OPCODE_ETH_GET_RX_FRAG_SIZE     (5)
 #define OPCODE_ETH_SET_RX_FRAG_SIZE     (6)


 /*
  * --- MCC_STATUS_CODE ---
  * These are the global status codes used by all subsystems
  */
 #define MCC_STATUS_SUCCESS              (0)	/* Indicates a successful
 						completion of  the command */
 #define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1)	/* The client does not have
 						sufficient privileges to
 						execute the command */
 #define MCC_STATUS_INVALID_PARAMETER    (2)	/* A parameter in the command
 						was invalid. The extended
 						status contains the index
 						of the parameter */
 #define MCC_STATUS_INSUFFICIENT_RESOURCES (3)	/* There are insufficient
 						chip resources to execute
 						the command */
 #define MCC_STATUS_QUEUE_FLUSHING       (4)	/* The command is completing
 						because the queue was
 						getting flushed */
 #define MCC_STATUS_DMA_FAILED           (5)	/* The command is completing
 						with a DMA error */

 /*
  * --- MGMT_ERROR_CODES ---
  * Error Codes returned in the status field of the FWCMD response header
  */
 #define MGMT_STATUS_SUCCESS             (0)	/* The FWCMD completed
 						without errors */
 #define MGMT_STATUS_FAILED              (1)	/* Error status in the Status
 						field of  the
 						struct FWCMD_RESPONSE_HEADER */
 #define MGMT_STATUS_ILLEGAL_REQUEST     (2)	/* Invalid FWCMD opcode */
 #define MGMT_STATUS_ILLEGAL_FIELD       (3)	/* Invalid parameter in
 						the FWCMD  payload */

 #endif /* __fwcmd_opcodes_amap_h__ */
	/*
	* Copyright (C) 2005 - 2008 ServerEngines
	* All rights reserved.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License version 2
	* as published by the Free Software Foundation. The full GNU General
	* Public License is included in this distribution in the file called COPYING.
	*
	* Contact Information:
	* linux-drivers@serverengines.com
	*
	* ServerEngines
	* 209 N. Fair Oaks Ave
	* Sunnyvale, CA 94085
	*/
	/*
	* Autogenerated by srcgen version: 0127
	*/
	#ifndef __fwcmd_opcodes_amap_h__
	#define __fwcmd_opcodes_amap_h__

	/*
	* --- FWCMD_SUBSYSTEMS ---
	* The commands are grouped into the following subsystems. The subsystem
	* code along with the opcode uniquely identify a particular fwcmd.
	*/
	#define FWCMD_SUBSYSTEM_RSVD (0) /* This subsystem is reserved. It is */
	/* never used. */
	#define FWCMD_SUBSYSTEM_COMMON (1) /* CMDs in this group are common to
	* all subsystems. See
	* COMMON_SUBSYSTEM_OPCODES for opcodes
	* and Common Host Configuration CMDs
	* for the FWCMD descriptions.
	*/
	#define FWCMD_SUBSYSTEM_COMMON_ISCSI (2) /* CMDs in this group are */
	/*
	* common to Initiator and Target. See
	* COMMON_ISCSI_SUBSYSTEM_OPCODES and
	* Common iSCSI Initiator and Target
	* CMDs for the command descriptions.
	*/
	#define FWCMD_SUBSYSTEM_ETH (3) /* This subsystem is used to
	execute Ethernet commands. */

	#define FWCMD_SUBSYSTEM_TPM (4) /* This subsystem is used
	to execute TPM commands. */
	#define FWCMD_SUBSYSTEM_PXE_UNDI (5) /* This subsystem is used
	* to execute PXE
	* and UNDI specific commands.
	*/

	#define FWCMD_SUBSYSTEM_ISCSI_INI (6) /* This subsystem is used to
	execute ISCSI Initiator
	specific commands.
	*/
	#define FWCMD_SUBSYSTEM_ISCSI_TGT (7) /* This subsystem is used
	to execute iSCSI Target
	specific commands.between
	PTL and ARM firmware.
	*/
	#define FWCMD_SUBSYSTEM_MILI_PTL (8) /* This subsystem is used to
	execute iSCSI Target specific
	commands.between MILI
	and PTL. */
	#define FWCMD_SUBSYSTEM_MILI_TMD (9) /* This subsystem is used to
	execute iSCSI Target specific
	commands between MILI
	and TMD. */
	#define FWCMD_SUBSYSTEM_PROXY (11) /* This subsystem is used
	to execute proxied commands
	within the host at the
	explicit request of a
	non priviledged domain.
	This 'subsystem' is entirely
	virtual from the controller
	and firmware perspective as
	it is implemented in host
	drivers.
	*/

	/*
	* --- COMMON_SUBSYSTEM_OPCODES ---
	* These opcodes are common to both networking and storage PCI
	* functions. They are used to reserve resources and configure
	* BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
	* subsystem code.
	*/
	#define OPCODE_COMMON_NTWK_MAC_QUERY (1)
	#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
	#define SUBSYSTEM_COMMON_NTWK_MAC_SET (1)
	#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
	#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
	#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
	#define SUBSYSTEM_COMMON_READ_FLASHROM (1)
	#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
	#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
	#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
	#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
	#define SUBSYSTEM_COMMON_RING_DESTROY (1)
	#define SUBSYSTEM_COMMON_CQ_CREATE (1)
	#define SUBSYSTEM_COMMON_EQ_CREATE (1)
	#define SUBSYSTEM_COMMON_ETH_RX_CREATE (1)
	#define SUBSYSTEM_COMMON_ETH_TX_CREATE (1)
	#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
	#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
	#define SUBSYSTEM_COMMON_MCC_CREATE (1)
	#define SUBSYSTEM_COMMON_JELL_CONFIG (1)
	#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
	#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
	#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
	#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
	#define SUBSYSTEM_COMMON_GET_QOS (1)
	#define SUBSYSTEM_COMMON_SET_QOS (1)
	#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
	#define SUBSYSTEM_COMMON_SEEPROM_READ (1)
	#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
	#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
	#define SUBSYSTEM_COMMON_NOP (1)
	#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
	#define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
	#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
	#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
	#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
	#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
	#define SUBSYSTEM_COMMON_GET_FAT (1)
	#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
	#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
	#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
	#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
	#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
	#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
	#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
	#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
	#define SUBSYSTEM_COMMON_RED_CONFIG (1)
	#define OPCODE_COMMON_NTWK_MAC_SET (2)
	#define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
	#define OPCODE_COMMON_NTWK_VLAN_CONFIG (4)
	#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
	#define OPCODE_COMMON_READ_FLASHROM (6)
	#define OPCODE_COMMON_WRITE_FLASHROM (7)
	#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
	#define OPCODE_COMMON_ADD_PAGE_TABLES (9)
	#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
	#define OPCODE_COMMON_RING_DESTROY (11)
	#define OPCODE_COMMON_CQ_CREATE (12)
	#define OPCODE_COMMON_EQ_CREATE (13)
	#define OPCODE_COMMON_ETH_RX_CREATE (14)
	#define OPCODE_COMMON_ETH_TX_CREATE (15)
	#define OPCODE_COMMON_NET_RESERVED0 (16) /* Reserved */
	#define OPCODE_COMMON_NET_RESERVED1 (17) /* Reserved */
	#define OPCODE_COMMON_NET_RESERVED2 (18) /* Reserved */
	#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
	#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
	#define OPCODE_COMMON_MCC_CREATE (21)
	#define OPCODE_COMMON_JELL_CONFIG (22)
	#define OPCODE_COMMON_FORCE_FAILOVER (23)
	#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
	#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
	#define OPCODE_COMMON_POST_ZERO_BUFFER (26)
	#define OPCODE_COMMON_GET_QOS (27)
	#define OPCODE_COMMON_SET_QOS (28)
	#define OPCODE_COMMON_TCP_GET_STATISTICS (29)
	#define OPCODE_COMMON_SEEPROM_READ (30)
	#define OPCODE_COMMON_TCP_STATE_QUERY (31)
	#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
	#define OPCODE_COMMON_NOP (33)
	#define OPCODE_COMMON_NTWK_RX_FILTER (34)
	#define OPCODE_COMMON_GET_FW_VERSION (35)
	#define OPCODE_COMMON_SET_FLOW_CONTROL (36)
	#define OPCODE_COMMON_GET_FLOW_CONTROL (37)
	#define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
	#define OPCODE_COMMON_SET_FRAME_SIZE (39)
	#define OPCODE_COMMON_GET_FAT (40)
	#define OPCODE_COMMON_MODIFY_EQ_DELAY (41)
	#define OPCODE_COMMON_FIRMWARE_CONFIG (42)
	#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
	#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
	#define OPCODE_COMMON_SET_VLD_CONFIG (45)
	#define OPCODE_COMMON_GET_VLD_CONFIG (46)
	#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
	#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
	#define OPCODE_COMMON_RED_CONFIG (49)



	/*
	* --- ETH_SUBSYSTEM_OPCODES ---
	* These opcodes are used for configuring the Ethernet interfaces. These
	* opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
	*/
	#define OPCODE_ETH_RSS_CONFIG (1)
	#define OPCODE_ETH_ACPI_CONFIG (2)
	#define SUBSYSTEM_ETH_RSS_CONFIG (3)
	#define SUBSYSTEM_ETH_ACPI_CONFIG (3)
	#define OPCODE_ETH_PROMISCUOUS (3)
	#define SUBSYSTEM_ETH_PROMISCUOUS (3)
	#define SUBSYSTEM_ETH_GET_STATISTICS (3)
	#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE (3)
	#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE (3)
	#define OPCODE_ETH_GET_STATISTICS (4)
	#define OPCODE_ETH_GET_RX_FRAG_SIZE (5)
	#define OPCODE_ETH_SET_RX_FRAG_SIZE (6)





	/*
	* --- MCC_STATUS_CODE ---
	* These are the global status codes used by all subsystems
	*/
	#define MCC_STATUS_SUCCESS (0) /* Indicates a successful
	completion of the command */
	#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1) /* The client does not have
	sufficient privileges to
	execute the command */
	#define MCC_STATUS_INVALID_PARAMETER (2) /* A parameter in the command
	was invalid. The extended
	status contains the index
	of the parameter */
	#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient
	chip resources to execute
	the command */
	#define MCC_STATUS_QUEUE_FLUSHING (4) /* The command is completing
	because the queue was
	getting flushed */
	#define MCC_STATUS_DMA_FAILED (5) /* The command is completing
	with a DMA error */

	/*
	* --- MGMT_ERROR_CODES ---
	* Error Codes returned in the status field of the FWCMD response header
	*/
	#define MGMT_STATUS_SUCCESS (0) /* The FWCMD completed
	without errors */
	#define MGMT_STATUS_FAILED (1) /* Error status in the Status
	field of the
	struct FWCMD_RESPONSE_HEADER */
	#define MGMT_STATUS_ILLEGAL_REQUEST (2) /* Invalid FWCMD opcode */
	#define MGMT_STATUS_ILLEGAL_FIELD (3) /* Invalid parameter in
	the FWCMD payload */

	#endif /* __fwcmd_opcodes_amap_h__ */